Recent progress in transition metal oxide/sulfide quantum dots-based nanocomposites for the removal of toxic organic pollutants

Scientific Insights into the Quantum Dots (QDs)-Based Electrochemical Sensors for State-of-the-Art Applications

Size-dependent optical and electronic properties are unique characteristics of quantum dots (QDs). A significant advantage is the quantum confinement effect that allows their precise tuning to achieve required characteristics and behavior for the targeted applications. Regarding the aforementioned factors, QDs-based sensors have exhibited dramatic potential for the diverse and advanced applications. For example, QDs-based devices have been potentially utilized for bioimaging, drug delivery, cancer therapy, and environmental remediation. In recent years, use of QDs-based electrochemical sensors have been further extended in other areas like gas sensing, metal ion detection, monitoring of organic pollutants, and detection of radioactive isotopes. Objective of this study is to rationalize the QDs-based electrochemical sensors for state-of-the-art applications. This review article comprehensively illustrates the importance of aforementioned devices along with sources from which QDs devices have been formulated and fabricated. Other distinct features of QDs devices are associated with their extremely high active surfaces, inherent ability of reproducibility, sensitivity, and selectivity for the targeted analyte detection. In this review, major categories of QD materials along with justification of their key roles in electrochemical devices have been demonstrated and discussed. All categories have been evaluated with special emphasis on the advantages and drawbacks/challenges associated with QD materials. However, in the interests of readers and researchers, recent improvements also have been included and discussed. On the evaluation, it has been concluded that despite significant challenges, QDs-based electrochemical sensors exhibit excellent performances for state-of-the-art and targeted applications.

Visible-light enhanced tetracycline degradation via SnO2/TiO2-Ni@rGO ternary heterostructures

This study explores the synthesis, characterization, and photocatalytic performance of a SnO2/TiO2-Ni@rGO nanocomposite for tetracycline (TC) degradation under visible light irradiation. The nanocomposite was precisely designed to enhance structural stability, charge transfer efficiency, and catalytic activity. X-ray diffraction (XRD) analysis confirmed the structural integrity of the SnO2/TiO2-Ni@rGO composite, demonstrating excellent reusability and resistance to photo-corrosion after multiple cycles. Photocatalytic experiments revealed that the SnO2/TiO2-Ni@rGO nanocomposite significantly outperformed individual SnO2/TiO2-Ni and rGO catalysts, achieving a remarkable 94.6% degradation of TC within 60 min. The degradation process followed pseudo-first-order kinetics, with a rate constant (k) of 0.046 min-1. The Z-scheme charge transfer mechanism facilitated efficient separation and migration of photogenerated charge carriers, generating reactive oxygen species such as superoxide (•O2 -) and hydroxyl (•OH) radicals crucial for the oxidation of TC. Radical scavenger studies confirmed that superoxide and hydroxyl radicals were the primary active species. The SnO2/TiO2-Ni@rGO composite also exhibited excellent reusability, maintaining high catalytic performance over four consecutive cycles. These findings suggest that the SnO2/TiO2-Ni@rGO nanocomposite is a promising candidate for the efficient and sustainable photocatalytic degradation of persistent organic pollutants like TC, offering significant potential for environmental remediation applications.

Biogenic nanoparticles: pioneering a new era in breast cancer therapeutics-a comprehensive review

Breast cancer, a widespread malignancy affecting women globally, often arises from mutations in estrogen/progesterone receptors. Conventional treatments like surgery, radiotherapy, and chemotherapy face limitations such as low efficacy and adverse effects. However, nanotechnology offers promise with its unique attributes like targeted delivery and controlled drug release. Yet, challenges like poor size distribution and environmental concerns exist. Biogenic nanotechnology, using natural materials or living cells, is gaining traction for its safety and efficacy in cancer treatment. Biogenic nanoparticles synthesized from plant extracts offer a sustainable and eco-friendly approach, demonstrating significant toxicity against breast cancer cells while sparing healthy ones. They surpass traditional drugs, providing benefits like biocompatibility and targeted delivery. Thus, this current review summarizes the available knowledge on breast cancer (its types, stages, histopathology, symptoms, etiology and epidemiology) with the importance of using biogenic nanomaterials as a new and improved therapy. The novelty of this work lies in its comprehensive examination of the challenges and strategies for advancing the industrial utilization of biogenic metal and metal oxide NPs. Additionally; it underscores the potential of plant-mediated synthesis of biogenic NPs as effective therapies for breast cancer, detailing their mechanisms of action, advantages, and areas for further research.

Unveiling the multifaceted applications of magnetically responsive chitosan capped ZnS QDs for sensing and annihilation of pharmaceutical drugs

The persistence of active pharmaceutical ingredients in water bodies has lead to detrimental impacts on public health as well as deteriorated aquatic resources at breakneck pace. To address this, highly fluorescent chitosan capped ZnS QDs (CZS QDs) were integrated with nickel ferrite nanoparticles (NF NPs) through ultrasonic assisted method to yield a series of magnetically responsive CZS-xNF nanohybrids (x = 5, 10, 15 and 20 wt% of NF). The successful fabrication of nanohybrids were affirmed through various techniques such as Fourier transform infra-red spectroscopy (FT-IR), powder X-ray diffraction (XRD), X-ray photoelectron microscopy (XPS), high resolution transmission electron microscopy (HRTEM), vibrating sample magnetometer (VSM) and diffused reflectance spectroscopy (DRS). The dual applicability of CZS-xNF nanohybrid was witnessed for the detection of pharmaceutical waste by fluorescence sensing and their concomitant annihilation via visible light driven photodegradation reactions. The developed nanohybrid showed exceptional selectivity towards tetracycline antibiotics, with ultra-low limit of detection of 0.53 μM for tetracycline (TC) and 0.30 μM for minocycline (MC), respectively. The fluorescent sensor was also analysed for trace level detection of tetracyclines in real water samples that showed satisfactory recoveries of 90-106%, depicting practical applicability of sensor. Additionally, the excellent photocatalytic features of synthesized nanohybrid prompted their use in photodegradation of TC and MC and a superior photocatalytic performance was achieved in comparison to CZS QDs. The enhanced photocatalytic performance of CZS-xNF nanohybrid can be attributed to type-I charge transfer mechanism, which resulted in efficient charge separation and reduced photo-induced recombination rate of charge carriers. The nanohybrids were recyclable up to four cycles after being utilized in sensing and photocatalysis, thus offering a promising strategy for environmental remediation through synchronized sensing and extirpation of pharmaceutical waste.

Ultrasonic processing of WO3 nanosheets integrated Ti3C2 MXene 2D-2D based heterojunctions with synergistic effects for enhanced water splitting and environmental remediation

This article describes a straightforward chemical procedure that involves hydrothermal and ultrasonic treatments to create a new 2D/2D ultrathin WO3/Ti3C2 heterojunctions. The features of the fabricated heterojunctions were characterized and examined by field emission electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), optical absorption spectroscopy (UV-Vis). By photodegrading an organic dye under the influence of visible light, the photocatalytic degradation capabilities of the heterojunctions were also investigated. The performance of WO3/Ti3C2 was superior to that of bare WO3, with a removal rate of 94% and a kinetic rate constant (k) that was approximately 3 times that of WO3. The creation of 2D/2D heterojunction was observed to encourage the spatial charge separation and increase the surface reactive sites, to result with the increased photocatalytic activity in WO3/Ti3C2 heterojunction. The photocurrent values discovered through photoelectrochemical studies further indicated Ti3C2's active function in enhancing water-splitting performance. The impedance analysis examined by an electrochemical method revealed that heterojunctions might be helpful in accelerating the migration of charges quickly to get the outcomes seen.

New Insights on Designing the Next-Generation Materials for Electrochemical Synthesis of Reactive Oxidative Species Towards Efficient and Scalable Water Treatment: A Review and Perspectives

Electrochemical water remediation technologies offer several advantages and flexibility for water treatment and degradation of contaminants. These technologies generate reactive oxidative species (ROS) that degrade pollutants. For the implementation of these technologies at an industrial scale, efficient, scalable, and cost-effective in-situ ROS synthesis is necessary to degrade complex pollutant mixtures, treat large amount of contaminated water, and clean water in a reasonable amount of time and cost. These targets are directly dependent on the materials used to generate the ROS, such as electrodes and catalysts. Here, we review the key design aspects of electrocatalytic materials for efficient in-situ ROS generation. We present a mechanistic understanding of ROS generation, including their reaction pathways, and integrate this with the key design considerations of the materials and the overall electrochemical reactor/cell. This involves tunning the interfacial interactions between the electrolyte and electrode which can enhance the ROS generation rate up to ~ 40% as discussed in this review. We also summarized the current and emerging materials for water remediation cells and created a structured dataset of about 500 electrodes and 130 catalysts used for ROS generation and water treatment. A perspective on accelerating the discovery and designing of the next generation electrocatalytic materials is discussed through the application of integrated experimental and computational workflows. Overall, this article provides a comprehensive review and perspectives on designing and discovering materials for ROS synthesis, which are critical not only for successful implementation of electrochemical water remediation technologies but also for other electrochemical applications.

A Review on the Use of Metal Oxide-Based Nanocomposites for the Remediation of Organics-Contaminated Water via Photocatalysis: Fundamentals, Bibliometric Study and Recent Advances

The improper disposal of toxic and carcinogenic organic substances resulting from the manufacture of dyes, drugs and pesticides can contaminate aquatic environments and potable water resources and cause serious damage to animal and human health and to the ecosystem. In this sense, heterogeneous photocatalysis stand out as one effective and cost-effective water depollution technique. The use of metal oxide nanocomposites (MON), from the mixture of two or more oxides or between these oxides and other functional semiconductor materials, have gained increasing attention from researchers and industrial developers as a potential alternative to produce efficient and environmentally friendly photocatalysts for the remediation of water contamination by organic compounds. Thus, this work presents an updated review of the main advances in the use of metal oxide nanocomposites-based photocatalysts for decontamination of water polluted by these substances. A bibliometric analysis allowed to show the evolution of the importance of this research topic in the literature over the last decade. The results of the study also showed that hierarchical and heterogeneous nanostructures of metal oxides, as well as conducting polymers and carbon materials, currently stand out as the main materials for the synthesis of MON, with better photocatalysis performance in the degradation of dyes, pharmaceuticals and pesticides.

Hotspots and Trends of Layered Double Hydroxide-based Adsorbents for Polluted Water Treatment: Insights from Bibliometric Analysis

The use of layered double hydroxides (LDHs) as adsorbent for water treatment has been gaining relevance in recent years. In this context, this work aimed to map, through a bibliometric study, the extent of research that deals with the theme. The scientific database used was the Web of Science, and the chronology of the search consideredthe period from 1997 to 2022. The bibliometix R-package and VOSviewer software were used in this study. The searches retrieved a total of 663 documents, from 69 countries, distributed among all continents, which China (328), India (51) and Japan (40) were the most productive countries. Important journals in the environmental area and with high impact factor, such as Chemical Engineering Journal (44), Applied Clay Science (38), Journal of Hazardous Materials (35) and Chemosphere (27) most published in the area. The network of keywords used by the authors indicates that the publications retrieved deal mainly with aspects related to the efficiency of (LDHs) in the removal of different pollutants, the composition, the synthesis route and the association with other materials and/or techniques. The result of this study constitutes an important tool for directing future research on the subject.

Enhanced activation of H2O2 by bimetallic Cu2SnS3: A new insight for Cu (II)/Cu (I) redox cycle promotion

HYPOTHESIS

Despite that the development of Cu₂SnS₃ (CTS) catalyst has attracted increasing interests, few study has reported to investigate its heterogeneous catalytic degradation of organic pollutants in a Fenton-like process. Furthermore, the influence of Sn components towards Cu (II)/Cu (I) redox cycling in CTS catalytic systems remains a fascinating research.

EXPERIMENTS

In this work, a series of CTS catalysts with controlled crystalline phases were prepared via a microwave-assisted pathway and applied in the H₂O₂ activation for phenol degradation. The efficiency of phenol degradation in CTS-1/H₂O₂ system (CTS-1: the molar ratio of Sn (copper acetate) and Cu (tin dichloride) is determined to be Sn:Cu = 1:1) was systematically investigated by controlling various reaction parameters including H₂O₂ dosage, initial pH and reaction temperature. We discovered that Cu₂SnS₃ exhibited superior catalytic activity to the contrast monometallic Cu or Sn sulfides and Cu (I) acted as the dominant active sites. The higher Cu (I) proportions conduce to the higher catalytic activities of CTS catalysts. Quenching experiments and electron paramagnetic resonance (EPR) further proved that the activation of H₂O₂ by CTS catalyst produces reactive oxygen species (ROS) and subsequently leads to degradation of the contaminants. A reasonable mechanism of enhanced H₂O₂ activation in Fenton-like reaction of CTS/H₂O₂ system was proposed for phenol degradation by investigating the roles of copper, tin and sulfur species.

FINDINGS

The developed CTS acted as a promising catalyst in Fenton-like oxidation progress for phenol degradation. Importantly, the copper and tin species contribute to a synergetic effect for the promotion of Cu (II)/Cu (I) redox cycle, which thus enhanced the activation of H₂O₂. Our work may offer new insight on the facilitation of Cu (II)/Cu (I) redox cycle in Cu-based Fenton-like catalytic systems.

Ultrasonic spray pyrolysis synthesis of TiO2/Al2O3 microspheres with enhanced removal efficiency towards toxic industrial dyes

Developing low-cost and highly effective adsorbent materials to decolorate wastewater is still challenging in the industry. In this study, TiO₂-modified Al₂O₃ microspheres with different TiO₂ contents were produced by spray pyrolysis, which is rapid and easy to scale up. Results reveal that the modification of γ-Al₂O₃ with TiO₂ reduced the crystallite size of Al₂O₃ and generated more active sites in the composite sample. The as-synthesized Al₂O₃-TiO₂ microspheres were applied to remove anionic methyl orange (MO) and cationic rhodamine B (RB) dyes in an aqueous solution using batch and continuous flow column sorption processes. Results show that the Al₂O₃ microspheres modified with 15 wt% of TiO₂ exhibited the maximum adsorbing capacity of ∼41.15 mg g^-1 and ∼32.28 mg g^-1 for MO and RB, respectively, exceeding the bare γ-Al₂O₃ and TiO₂. The impact of environmental complexities on the material's reactivity for the organic pollutants was further delineated by adjusting the pH and adding coexisting ions. At pH ∼5.5, the TiO₂/Al₂O₃ microspheres showed higher sorption selectivity towards MO. In the continuous flow column removal, the TiO₂/Al₂O₃ microspheres achieved sorption capacities of ∼31 mg g^-1 and ∼19 mg g^-1 until the breakthrough point for MO and RB, respectively. The findings reveal that TiO₂-modified Al₂O₃ microspheres were rapidly prepared by spray pyrolysis, and they effectively treated organic dyes in water in batch and continuous flow removal processes.

Fabrication of novel buckypaper metal oxide nano-catalysis glycerol carbonate/MWCNTs membrane for efficient removal of heavy metals

This study describes the fabrication of novel buckypaper membranes through the dispersion of multi-walled carbon nanotubes (MWCNTs) in the presence of surfactants metal oxide nano-catalysis Zinc oxide and magnesium oxide (ZnO and MgO) glycerol carbonate separately. Following vacuum filtration of the scattered solutions, self-supporting membranes known as buckypapers (BPs) were produced. The suggested membranes were employed for the efficient removal of heavy metals. The obtained data indicated that the incorporation of both glycerol carbonates prepared by two different nano metal oxides enhanced the permeability of MWCNTs membranes rejection efficiency. The characterization of the synthesized metal oxide nanoparticles, as well as the physicochemical and morphological properties of the membranes, were investigated. The rejection capabilities of membranes for the heavy metal ions were examined. Moreover, the suggested MWCNTs/ZnO nano-catalyst glycerol carbonate BP membrane displayed high rejection efficiency for heavy metals (Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, and Pb²⁺) than that prepared from the MgO nano-catalyst one.

Advances in Ultra-small Fluorescence Nanoprobes for Detection of Metal Ions, Drugs, Pesticides and Biomarkers

Identification of trace level chemical species (drugs, pesticides, metal ions and biomarkers) plays key role in environmental monitoring. Recently, fluorescence assay has shown significant advances in detecting of trace level drugs, pesticides, metal ions and biomarkers in real samples. Ultra-small nanostructure materials (metal nanoclusters (NCs), quantum dots (QDs) and carbon dots (CDs)) have been integrated with fluorescence spectrometer for sensitive and selective analysis of trace level target analytes in various samples including environmental and biological samples. This review summarizes the properties of metal NCs and ligand chemistry for the fabrication of metal NCs. We also briefly summarized the synthetic routes for the preparation of QDs and CDs. Advances of ultra-small fluorescent nanosensors (NCs, QDs and CDs) for sensing of metal ions, drugs, pesticides and biomarkers in various sample matrices are briefly discussed. Additionally, we discuss the recent challenges and future perspectives of ultra-small materials as fluorescent sensors for assaying of wide variety of target analytes in real samples.

Effect of the green synthesis of CuO plate-like nanoparticles on their photodegradation and antibacterial activities

Green synthesis of copper oxide nanoparticles and its effects on photocatalytic dye degradation and antibacterial activities are reported. The synthesis of nanoparticles by green routes provides many advantages over chemical routes, including simplicity, cost-effectiveness, and fast processing route without using any costly or harmful chemicals. Tridax procumbense (coat buttons) plant root extract was used to synthesize copper oxide nanoparticles. The synthesized Tridax procumbense-copper oxide nanoparticles (TP-CuO NPs) were characterized by UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering spectroscopy (DLS), and X-ray diffraction (XRD) techniques. The synthesized TP-CuO NPs were applied for photocatalytic dye degradation and antibacterial activity studies. The TP-CuO NPs exhibited a maximum antibacterial activity at 500 μg mL^-1 concentration against Staphylococcus aureus and E. coli showing inhibition zones of 7.5 mm and 7.2 mm, respectively. The photocatalytic ability of the TP-CuO was also tested against the textile dye Trypan blue (TB), and showed about 55% degradation after 48 h for 500 μg mL^-1 CuO NP concentration, showing a concentration-dependent degradation efficiency. This is the first work on TP-derived CuO nanoparticles and their photocatalytic and antimicrobial applications. Overall, this study supports the superiority of green-synthesized TP-CuO NPs as photocatalytic and antimicrobial agents.

Novel BiVO4-nanosheet-supported MoS2-nanoflake-heterostructure with synergistic enhanced photocatalytic removal of tetracycline under visible light irradiation

This paper describes a simple in-situ hydrothermal technique for the production of BiVO₄/MoS₂ binary nanocomposites as visible-light-driven catalysts. The as-prepared samples were analyzed by structural, morphological, compositional, optical, surface area, and photocurrent analyses. The lattice fringe spaces at 0.304 nm and 0.612 nm were indexed to the (112) and (002) crystal planes of BiVO₄ and MoS₂, respectively. Antibacterial photocatalytic capabilities were assessed using tetracycline (TC). Consequently, it was observed that the BiVO₄/MoS₂ nanocomposite demonstrated improved antibacterial removal ability compared with the pristine samples. The BiVO₄/MoS₂ nanocomposite exhibited 97.46% removal of TC compared with the pure BiVO₄ (43.76%) and MoS₂ (35.28%) samples within 90 min. Thus, the photocatalytic performance was observed to follow the given order: BiVO₄/MoS₂ nanocomposite > BiVO₄ > MoS₂. The removal of TC after 90 min of irradiation was approximately 97.46%, 96.62%, 95.59%, and 94.45% after the 1st, 2nd, 3rd, and 4th cycles, respectively. Thus, the recycling tests revealed the stability of the photocatalyst, which exhibited a TC removal efficiency of 94.45% without distinct decay, even after the 4th cycle. According to the trapping results, hydroxyl radicals and holes were the key species and demonstrated a greater influence on the photocatalytic performance than superoxide radicals. The increased activity of the BiVO₄/MoS₂ nanocomposite may be attributed to its large surface area and tunable bandgap, which accelerate the charge-transport characteristics of the photocatalytic system. This insight and synergetic effects can provide a new approach for the development of novel heterostructure photocatalysts.

Visible-light-driven indium vanadium oxide nanosheets supported bismuth tungsten oxide nanoflakes heterostructure as an efficient photocatalyst for the tetracycline degradation

The development of excellent photocatalysts is of great significance for the efficient photocatalytic degradation process, however, the low carrier separation efficiency and poor light absorption ability typically limit the performance of photocatalysts. Herein, a visible light responsive heterostructure composed with indium vanadium oxide nanosheets supported bismuth tungsten oxide nanoflakes (InVO₄/Bi₂WO₆) was synthetized through in-situ hydrothermal method. Further, the photocatalytic activity was performed for tetracycline (TC) under visible light illumination. The InVO₄/Bi₂WO₆ heterostructure builds a strong interface between InVO₄ and Bi₂WO₆ to hinder reunion of photoinduced charge carriers, and provides the sensitive agents for the removal of TC. In particular, the InVO₄/Bi₂WO₆ photocatalyst prepared by taking 5.0 mg of Bi₂WO₆ shows the highest degradation of TC about 97.42% in 72 min. The quenching experiments identified that hydroxyl radicals, and holes dominated in the photocatalytic process. Furthermore, the optimized nanocomposite is stable even after four cycles, which exposes the excellent photostability and reusability of the photocatalyst. In addition, a plausible degradation pathway and mechanism of TC over InVO₄/Bi₂WO₆ nanocomposite is also projected.

Role of Anions in the Synthesis and Crystal Growth of Selected Semiconductors

The ideal methods for the preparation of semiconductors should be reproducible and possess the ability to control the morphology of the particles with monodispersity yields. Apart from that, it is also crucial to synthesize a large quantity of desired materials with good control of size, shape, morphology, crystallinity, composition, and surface chemistry at a reasonably low production cost. Metal oxides and chalcogenides with various morphologies and crystal structures have been obtained using different anion metal precursors (and/or different sulfur sources for chalcogenides in particular) through typical synthesis methods. Generally, spherical particles are obtained as it is thermodynamically favorable. However, by changing the anion precursor salts, the morphology of a semiconductor is influenced. Therefore, precursors having different anions show some effects on the final forms of a semiconductor. This review compiled and discussed the effects of anions (NO₃⁻, Cl⁻, SO₄^2-, CH₃COO⁻, CH(CH₃)O⁻, etc.) and different sources of S^2- on the morphology and crystal structure of selected metal oxides and chalcogenides respectively.

An effective CuO/Bi2WO6 heterostructured photocatalyst: Analyzing a charge-transfer mechanism for the enhanced visible-light-driven photocatalytic degradation of tetracycline and organic pollutants

Over the past few years, industrial pollution has had a negative impact on aquatic life by releasing significant amounts of hazardous chemicals into the ecosystem. Therefore, it is imperative to develop photocatalytic materials with good photocatalytic activity and easy separation. Photocatalytic degradation has been employed for the removal of such contaminants using binary hybrid nanocomposites as photocatalysts. In the present study, binary CuO/Bi₂WO₆ (CuBW) nanocomposites with different loadings of Bi₂WO₆ (~5, 10, and 15 mg) were successfully constructed using a simple hydrothermal method and used as a potential photocatalyst for the degradation of tetracycline (TC) and methylene blue (MB) under visible-light irradiation. The structure, surface morphology, and optical properties were studied to investigate the formation of the heterostructure. Among the prepared samples, the CuBW nanocomposite containing the optimum content of Bi₂WO₆ (~10 mg) exhibited superior activity toward the photocatalytic degradation of TC (97.72%) in 75 min and MB (99.43%) in 45 min under visible-light illumination. Radical trapping experiments suggested that holes and •OH radicals were the dominant reactive species during the photocatalytic process. The photoelectrochemical results also confirmed the improved separation and transfer of electron-hole pairs at the interface of Bi₂WO₆ and CuO. Our results demonstrate that the binary CuO/Bi₂WO₆ nanocomposite has significant potential applications in the field of photocatalysis due to its enhanced separation of the photoexcited charge carriers and strong synergistic interactions.

Facile fabrication of novel Fe3O4-SnO2-gC3N4 ternary nanocomposites and their photocatalytic properties towards the degradation of carbofuran

Herein, Fe₃O₄-SnO₂ nanoheterojunction has been synthesized and successfully encapsulated in gC₃N₄ matrix using a novel hydrothermal technique. The synthesized material was characterized using sophisticated analytical methods like XRD, TEM, BET, UV-Vis, VSM and XPS to evaluate structural, morphological, optical, magnetic and surface chemical properties. The hybrid nanostructure Fe₃O₄-SnO₂-gC₃N₄ has been utilized for the LED light-induced photocatalytic degradation of carbofuran. The catalyst exhibited notable photocatalytic performance under visible light with an efficiency of ~89% and pseudo first order rate constant of 0.015 min^-1. The result of change in variables like catalyst dose, pollutant concentration, pH and contact time on the photodegradation efficiency and degradation kinetics was studied. The incorporation of Fe₃O₄ improved the magnetic separation of the catalyst after several cycles of operation, thereby improving the practical utility of the catalyst system to tackle organic pollutants.

Nickel decorated manganese oxynitride over graphene nanosheets as highly efficient visible light driven photocatalysts for acetylsalicylic acid degradation

In this work, we prepared nanocomposites of nickel-decorated manganese oxynitride on graphene nanosheets and demonstrated them as photocatalysts for degradation of acetylsalicylic acid (ASA). The catalyst exhibited a high degradation efficiency over ASA under visible light irradiation and an excellent structural stability after multiple uses. Compared to manganese oxide (MnO) and manganese oxynitride (MnON) nanoparticles, larger specific surface area and smaller band gap were observed for the nanocomposite accounting for the enhanced photocatalytic efficiency. Besides the compositional effect of the catalyst, we also examined the influence of various experimental parameters on the degradation of ASA such as initial concentration, catalyst dose, initial pH and additives. The best performance was obtained for the nanocomposite when the catalyst dose was 10 mg/mL and the initial pH 3. Detection of intermediates during photocatalysis showed that ASA undergoes hydroxylation, demethylation, aromatization, ring opening, and finally complete mineralization into CO₂ and H₂O by reactive species. For practical applications as a photocatalyst, cytotoxicity of the nanocomposite was also evaluated, which revealed its insignificant impact on the cell viability. These results suggest the nanocomposite of nickel-decorated manganese oxynitride on graphene nanosheets as a promising photocatalyst for the remediation of ASA-contaminated water.

Recent developments on bismuth oxyhalides (BiOX; X = Cl, Br, I) based ternary nanocomposite photocatalysts for environmental applications

Photocatalytic treatment of organic pollutants present in wastewater using semiconductor nanomaterials under light irradiation is one of the efficient advanced oxidation processes. Stable metal oxide (e.g. TiO₂) based semiconductor photocatalytic systems have been mainly investigated for this purpose. Nevertheless, their large band gap (~3.2 eV) makes them inefficient in utilization of visible light portion of solar light leading to a lower degradation efficiency. Investigations have focused on the development of visible light responsive bismuth oxyhalides (BiOX; X = Cl, Br, I), one of the potential nanomaterials with unique layered structure, for efficient absorption of solar light for the degradation of pollutants. However, the rapid recombination rate of photogenerated charge carriers limits their practical applicability. To overcome such drawbacks, the development of BiOX based ternary nanocomposites received significant attention because of their unique structural and electronic properties, improved visible light response and increased separation and transfer rate of photogenerated charge carriers. This review aims to provide a comprehensive overview of the recent developments on bismuth oxyhalides-based ternary nanocomposites for enhanced environmental pollutants decomposition under visible light irradiation. The principles of photocatalysis, synthetic methodologies of bismuth oxyhalides and their characteristics such as heterojunctions formation, improved visible light response and separation rate of charge carriers and the mechanisms for enhanced visible light photocatalytic activity are discussed. In addition, the future prospects on the improvement in the photocatalytic activity of bismuth oxyhalides-based ternary nanocomposites are also discussed. This review could be beneficial for designing new ternary nanocomposites with superior visible light photocatalytic efficiency.

Visible light-conducting polymer nanocomposites as efficient photocatalysts for the treatment of organic pollutants in wastewater

This review compiles recent advances and challenges on photocatalytic treatment of wastewater using nanoparticles, nanocomposites, and polymer nanocomposites as photocatalyst. The review provides an overview of the fundamental principles of photocatalytic treatment along the recent advances on photocatalytic treatment, especially on the modification strategies and operational conditions to enhance treatment efficiency and removal of recalcitrant organic contaminants. The different types of photocatalysts along the key factors influencing their performance are also critically discussed and recommendations for future research are provided.