Photocatalytic degradation of ibuprofen on S-doped BiOBr

Z-scheme heterojunction BiOBr/MIL-100(Fe) visible photocatalytic-permonosulfate degradation of AO7

Metal-organic frameworks (MOFs) have garnered significant interest in the field of photocatalysis. In this study, Z-scheme heterojunction BM-x composites consisting of bismuth bromide oxide (BiOBr) and iron-based metal-organic backbone (MIL-100(Fe)) were successfully synthesized using ethylene glycol as a solvent. The composites were characterized using various techniques. BM-x exhibit abundant functional groups, large specific surface areas, and narrow band gap energy, thus provide numerous active sites for catalytic reactions and respond well to visible light. Notably, BM-7 displays remarkable catalytic activity in a visible light-activated permonosulfate (PMS) system and achieves a degradation rate of 99.02% over 100 mg/L gold orange II (AO7) within 60 min. The effects of BM-7 and PMS addition, initial AO7 concentration, initial pH, inorganic anions, and humic acid on the degradation system were investigated. The proposed mechanism of the Z-scheme heterojunction in the BM-7 photocatalyst demonstrates effective photoelectron transfer from the BiOBr conduction band to the MIL-100(Fe) valence band, resulting in excellent catalytic activity. Radical burst experiments identified 1O2, h+, and ·O2- as the main active substances. BM-7 has high stability and reusability, with a degradation rate reduction of only 14.48% after three recycles. These findings provide valuable insights into using persulfate combined with visible light.

Growth of sulfur-doped bismuth oxybromide nanosheets on carbon fiber cloth for photocatalytically purifying antibiotic wastewater

Bismuth oxybromide (BiOBr) nanomaterials are well-known efficient powder-shaped photocatalyst for degrading antibiotic wastewater, but their practical applications have been limited by unsatisfactory photo-absorption, weak photocatalytic activity and poor recyclability. To address these issues, we demonstrate that the growing of S-doped BiOBr nanosheets on carbon fiber cloth (CFC) can lead to efficient photocatalysis with recyclable features. With carbon fiber cloth as the substrate, S-doped BiOBr (BiOBr-Sx) nanosheets (diameter: ∼500 nm, thicknesses: ∼5-90 nm) was prepared by solvothermal method with thiourea as dopant. With the increase of thiourea (0-0.2 g) in the precursor solution, BiOBr-Sx nanosheets exhibit a significant shift in the photo-absorption edge from 420 to 461 nm and decreased thicknesses from 90 to 5 nm, accompanying by the increased proportion of (010) exposed surface. Amony them, CFC/BiOBr-S0.5 can degrade various contaminants (such as 98.7 % levofloxacin (LVFX), 95.6 % ciprofloxacin (CIP) and 95.9 % tetracycline (TC)) with most degradation efficiency within 120 min of visible light irradiation, which are 1.6, 1.9 and 1.4 times than that of CFC/BiOBr (61.4 % LVFX, 49.5 % CIP and 67.1 % TC), respectively. Significantly, when CFC/BiOBr-S0.05 photocatalytic fabric is combined with a multi-stage flow device to treat the flowing wastewater (10 mg/L LVFX, rate: 1 L/h), 91.0 % LVFX can be degraded after tenth grade. Therefore, this study not only demonstrates the controllable preparation of S-doped BiOBr nanosheets with different thickness on CFC but also highlights the practical applications of fabric-based photocatalysts for purifying the flowing sewage efficiently.

An ultrasensitive free-of-electronic sacrificial agent photoelectrochemical aptasensor for the detection of dibutyl phthalate based on Z-scheme p-n Bi-doped BiOI/Bi2S3 heterojunction

Dibutyl phthalate (DBP), a common and outstanding plasticizer, exhibits estrogenic, mutagenic, carcinogenic, and teratogenic properties. It is easily liberated from plastic materials and pollutes aquatic ecosystems, endangering human health. Therefore, highly sensitive and selective DBP detection methods are necessary. In this work, a free-of-electronic sacrificial agent photoelectrochemical (PEC) aptasensor for DBP detection was constructed using a novel Z-scheme Bi-doped BiOI/Bi2S3 (Bi-BIS) p-n heterojunction. The Bi-BIS composites had higher visible-light absorption, charge transfer, and separation efficiency. This is attributed to the synergistic effect of the formation of Z-scheme p-n heterojunction between BiOI and Bi2S3, the plasma resonance effect of metallic Bi and photosensitization of Bi2S3, thus exhibiting large and stable photocurrent response in the absence of electron sacrificial agent, that was 10.4 and 6.4 times higher than that of BiOI and Bi2S3, respectively. Then, a DBP PEC aptasensor was constructed by modifying the DBP aptamer on the surface of the ITO/Bi-BIS electrode. The aptasensor demonstrated a broad linear range (2-500 pM) and a low detection limit (0.184 pM). What's more, because there is no interference from electronic sacrificial agent, the aptasensor exhibited excellent selectivity in real water samples. Therefore, the proposed PEC has considerable potential for DBP monitoring.

Photocatalytic Depolymerization of Lignin: C-O Bond Cleavage in β-O-4 Models Using S-Doped Ultra-Thin Bi3O4Cl Nanosheets

The selective depolymerization of β-O-4 lignin models into high-value aromatic monomers using photocatalysis presents both significant opportunities and challenges. Photocatalysts often face issues such as high photogenerated carrier recombination rates and limited operational lifetimes. This study introduces S doping to modulate the surface interface of Bi3O4Cl (BOC) nanosheets, enhancing C-O bond cleavage efficiency in β-O-4 lignin models under visible light at ambient temperatures. Comprehensive characterization, including atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR), and density functional theory (DFT) analysis, revealed that S doping reduces BOC nanosheet thickness to 1.51 nm and promotes charge carrier separation, thereby generating greater concentrations of reactive species, specifically •O2- and •OH. Photocatalytic depolymerization experiments demonstrated that S-doped BOC achieved a C-O bond cleavage selectivity of 93% and an aromatic monomer yield of 629.03 μmol/g/h (i.e., 1.5 times higher than that of undoped BOC). This work provides a strategic approach to designing photocatalysts with enhanced selectivity and efficiency for lignin depolymerization.

Integrating the 2D/2D heterostructure of the MXene monolayer and BiOBr nano-sheets for superior photo-catalysis

The highly efficient photo-oxidation of alcohols has sparked significant potential to cope with environmental pollution and the ever-increasing energy crisis. This study reports a unique Ti3C2/BiOBr (TB) heterojunction with a rich inter-face based on in situ exfoliation of MXene and subsequently anchored onto BiOBr sheets. The TB nano-composites exhibited substantially improved photo-catalytic activity towards the photo-oxidation of benzyl alcohol (BA) to benzaldehyde and achieved a formation rate of 1.73 mmol g-1 h-1, greater than pristine BiOBr. The ultra-thin inter-facial contact boosted the oxygen vacancies (Ov) and Ti3+ and possessed the most negative adsorption energy, which boosted the transfer and separation of inter-facial charge carriers and the adsorption and dissociation of BA. Overall, the successful synthesis of TB composite, along with its exceptional photo-catalytic performance, offers valuable insights for applications in green chemistry and environmental remediation.

One-Pot Synthesis of C@BiOBr for Efficient Photocatalytic Degradation of Phenol

This work describes the synthesis of C@BiOBr using glucose as the carbon precursor by a repeatable one-step hydrothermal method. Characterization studies indicate that the structure of BiOBr did not change after the carbon layer was encapsulated on the surface. The highest activity is achieved at 1.2-C@BiOBr, with 97% of phenol (50 mg·L-1) degrading within 90 min, and the degradation amount of phenol is determined to be 48.5 mg·g-1 with a speed of 0.54 mg·g-1·min-1. The useful species of phenol degradation are studied and assigned to •O2-, 1O2, and h+. The effect of coated carbon layer for photocatalytic degradation of phenol over BiOBr is studied by photoelectrochemical experiments, fluorescence spectra, and density functional theory (DFT) calculations. It is attributed to the good conductivity of carbon, enhanced separation of the photocarriers by carbon coating, and thermodynamically favorable reactive oxygen species (ROS) production on the surface of carbon. This work demonstrates that carbon coating is an effective strategy to improve the photocatalytic activity of BiOBr and reveals the detailed mechanism.

A Tight-Connection g-C3N4/BiOBr (001) S-Scheme Heterojunction Photocatalyst for Boosting Photocatalytic Degradation of Organic Pollutants

The efficient separation of photogenerated charge carriers and strong oxidizing properties can improve photocatalytic performance. Here, we combine the construction of a tightly connected S-scheme heterojunction with the exposure of an active crystal plane to prepare g-C3N4/BiOBr for the degradation of high-concentration organic pollutants. This strategy effectively improves the separation efficiency of photogenerated carriers and the number of active sites. Notably, the synthesized g-C3N4/BiOBr displays excellent photocatalytic degradation activity towards various organic pollutants, including methylene blue (MB, 90.8%), congo red (CR, 99.2%), and tetracycline (TC, 89%). Furthermore, the photocatalytic degradation performance of g-C3N4/BiOBr for MB maintains 80% efficiency under natural water quality (tap water, lake water, river water), and a wide pH range (pH = 4-10). Its excellent photocatalytic activity is attributed to the tight connection between g-C3N4 and BiOBr in the S-scheme heterojunction interface, as well as the exposure of highly active (001) crystal planes. These improve the efficiency of the separation of photogenerated carriers, and maintain their strong oxidation capability. This work presents a simple approach to improving the separation of electrons and holes by tightly combining two components within a heterojunction.

Visible Light Motivated the Photocatalytic Degradation of P-Nitrophenol by Ca2+-Doped AgInS2

4-Nitrophenol (4-NP) is considered a priority organic pollutant with high toxicity. Many authors have been committed to developing efficient, green, and environmentally friendly technological processes to treat wastewater containing 4-NP. Here, we investigated how the addition of Ca2+ affects the catalytic degradation of 4-NP with AgInS2 when exposed to light. We synthesized AgInS2 (AIS) and Ca2+-doped AgInS2 (Ca-AIS) with varying amounts of Ca2+ using a low-temperature liquid phase method. The SEM, XRD, XPS, HRTEM, BET, PL, and UV-Vis DRS characteristics were employed to analyze the structure, morphology, and optical properties of the materials. The effects of different amounts of Ca2+ on the photocatalytic degradation of 4-NP were investigated. Under visible light illumination for a duration of 120 min, a degradation rate of 63.2% for 4-Nitrophenol (4-NP) was achieved. The results showed that doping with an appropriate amount of Ca2+ could improve the visible light catalytic activity of AIS. This work provides an idea for finding suitable cheap alkaline earth metal doping agents to replace precious metals for the improvement of photocatalytic activities.

Fabrication of a PCN/BiOBr 2D hybrid with improved photocatalytic performance of 2,4-dichorophenol degradation

Photocatalysis has received much attention as an environmentally friendly route to manage the emerging organic pollution problems. Herein, BiOBr nanosheets have been synthesized by a hydrothermal method, and then PCN/BiOBr hybrids are designed via a facile wet chemical method. The as-prepared PCN/BiOBr hybrids are characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectra (UV-vis DRS), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The PCN/BiOBr composite exhibits remarkable improved activity in the degradation of 2,4-dichlorophenol (2,4-DCP) as compared to the pristine BiOBr. Based on the ·OH amount-related fluorescence spectra fluorescence and the photoelectrochemistry (PEC) tests, it is confirmed that the enhanced photocatalytic performance of PCN/BiOBr is attributed to the promoted charge separation. Moreover, by means of the radical-trapping experiments it is demonstrated that the formed ·O2- species, as the electron-modulated direct products, are the primary active species during the photocatalytic degradation of 2,4-DCP. This work would provide a feasible design strategy to fabricate high-activity photocatalysts for 2,4-DCP degradation.

BiOCl Nanosheets with (001), (002), and (003) Dominant Crystal Faces with Excellent Light-Degradation Ability

Gray bismuth chloride nanosheets with a highly enhanced electric field intensity were prepared by a simple and efficient method. Their energy gap is reduced to 2.35 eV. The prepared nanosheets show high photocatalytic activity for the degradation of rhodamine B under visible light. The resulting samples were characterized by X-ray diffractometry, high-resolution scanning electron microscopy, X-ray photoelectron spectroscopy, infrared spectroscopy, UV-vis diffuse reflectance spectroscopy, specific surface area analysis, electrochemical analysis, electron paramagnetic resonance, and UV-vis spectroscopy. The photocatalytic activity of prepared BiOCl was evaluated by the degradation of RhB. The prepared BiOCl sample (0.5 g/L) could completely degrade RhB (10 mg/L) within 10 min, and its visible photocatalytic activity was 80 times that of the original white BiOCl. Superoxide radicals were the main active substance involved in organic degradation.

In-situ synthesis of novel dual S-scheme AgI/Ag6Mo7O24/g-C3N4 heterojunctions with tandem structure for photocatalytic degradation of organic pollutants

The controllable design of multivariate heterojunction with sequential structures is of significant relevance for breaking the performance limit of binary composite photocatalysts. In this work, the novel dual S-scheme ternary-component AgI/Ag₆Mo₇O₂₄/exfoliated g-C₃N₄ (ECN) composite was prepared by a two-step in-situ synthetic strategy. The energy band bending at the heterointerface and the formation of dual built-in electric field could be observed due to distinct work functions of different components in the ternary composite. Benefiting from the sequential heterojunction structure, the AgI/Ag₆Mo₇O₂₄/ECN composite achieved 98.7% removal efficiency of 2-nitrophenol (2-NP) within 70 min under visible light irradiation, and AgI/Ag₆Mo₇O₂₄/ECN also showed higher degradation efficiency for a variety of organic pollutants such as methylene blue (MB), rhodamine B (RhB), methyl orange (MO), 4-nitrophenol (4-NP), 2-sec-butyl-4,6-dinitrophenol (DNBP) and tetracycline (TC). Notably, •OH and •O₂^- played dominant roles in the AgI/Ag₆Mo₇O₂₄/ECN set up, which was consistent with the dual S-scheme charge transfer mechanism. In-depth insights for the photodegradation of 2-NP were presented based on a combined DFT study and GC-MS analysis. Additionally, the photoreduction of Ag⁺ in AgI/Ag₆Mo₇O₂₄/ECN was also evaded by the fast transfer of photogenerated electrons through the dual S-scheme pathway, achieving the effect of killing two birds with one stone.

One-step hydrothermal synthesis of rhombohedral ZnIn2S4 with high visible photocatalytic activity for aqueous pollutants removal

The phase composition of photocatalyst has a substantial effect on its photocatalytic activity. In this work, the rhombohedral phase ZnIn₂S₄ was synthesized by a one-step hydrothermal method by using inexpensive Na₂S as a sulfur source with the assistance of NaCl. The Na₂S as the S source can promote the generation of rhombohedral ZnIn₂S₄, and the addition of NaCl enhances the crystallinity of the as-prepared rhombohedral ZnIn₂S₄. The rhombohedral ZnIn₂S₄ nanosheets had a narrower energy gap, more negative conductive band potential, and higher separation efficiency of photogenerated carriers relative to the hexagonal ZnIn₂S₄. The as-synthesized rhombohedral ZnIn₂S₄ exhibited high visible photocatalytic activity with removal efficiencies of 96.7% in 80 min for the methyl orange, 86.3% in 120 min for ciprofloxacin hydrochloride and nearly 100% in 40 min for Cr(VI).

Synthesis of cerium oxide embedded perovskite type bismuth ferrite nanocomposites for sonophotocatalysis of aqueous micropollutant ibuprofen

Ibuprofen is potentially toxic and carcinogenic for freshwater ecosystems and poses a serious threat to human health by affecting kidney function. The present study focused on the sunlight-controlled degradation of ibuprofen from water using a novel magnetically separable cerium oxide-embedded bismuth ferrite heterostructure. Catalysts were synthesized by solvothermal and co-precipitation methods and characterized by X-ray diffractometry, transmission electron microscopy, X-ray photoelectron spectroscopy, UV-vis optical absorption spectroscopy, and nitrogen adsorption. This study investigated the effect of photocatalysis, sonolysis, sonophotolysis, and sonophotocatalysis on the degradation of ibuprofen in water. Pseudo-first-order and second-order kinetics were applied to evaluate the rate of reaction for ibuprofen degradation. The addition of 5% CeO2 to the BiFeO3 significantly increased the surface area and pore volume of bismuth ferrite, which enhanced their photocatalytic degradation efficiency by 2.28 times in terms of ibuprofen mineralization. Sonolysis treatment alone and in combination with photolysis led to the degradation of ibuprofen, but with the formation of intermediate products. Positive synergy was observed when sonolysis was combined with photocatalysis in terms of the mineralization of ibuprofen and the degradation of intermediates along with their parent compound. It was proposed that, compared to photocatalytic mineralization, the ultrasound-assisted advanced oxidation process resulted in the conversion of ibuprofen to its mineralization products.

Low-cost and resource-efficient monolithic photocatalyst with enhanced solar light utilization for the photocatalytic treatment of organic wastewater

Developing low-cost, well-performing, and resource-efficient photocatalysts with enhanced solar light utilization can contribute to the practicability of photocatalytic techniques in organic wastewater treatment. This study fabricated and characterized a novel sunlight-driven BiOBr- and acetylene black (AB)-loaded monolithic photocatalyst. The fly ash-based geopolymer acts as photocatalyst support that can also provide adsorption sites and semiconductor metal oxide (Fe₂O₃). A conductive network in the geopolymer structure formed by AB can promote the separation of e^--h⁺ pairs generated by active sites (BiOBr and Fe₂O₃). Moreover, the photothermal effect induced by AB can assist the photocatalytic reaction at the microinterface of the photocatalyst. This photocatalyst was suspended on the surface of an aqueous solution for sufficient contact with oxygen from the air and is thus beneficial for producing ¹O₂ and ·OH as the main active species. Within 30 min, it exhibited higher photothermal-photocatalytic activity with 96% removal efficiency of the target pollutant methylene blue (MB), which occurred at an initial concentration of 20 mg L^-1. The demethylation and hydroxylation process induced by the active species constituted the primary degradation pathway for MB by Bi/AB/MFGP. Overall, this study provides a valuable reference for developing economical, effective, and practical photocatalysts and applying geopolymers in photocatalysis.

One-pot construction of highly efficient TaON/Bi2O3/S-BiOCl ternary photocatalysts: Simultaneously integrating type-Ⅰ with Z-scheme junctions for improved visible light-driven removal of organic pollutants

Bismuth oxychloride (BiOCl) has appeared as a popular candidate in photocatalysis field but is plagued by its poor visible light harvesting and low carriers-flow steering inherited from wide band gap. Integration of doping and heterojunction engineering into the bulk has proven to be an optimal and generally applied method for enabling excellent photocatalytic activity. Nevertheless, the previous reported BiOCl-based photocatalysts fabricated by the above strategies are still suffered from harsh synthesis process, poor interface stability and narrow application area. Here, we introduce a facile one-pot hydrothermal strategy to achieve in-situ growth of TaON as a medium on the surface of Bi₂O₃ and S-doped BiOCl (denoted as S-BiOCl) for constructing ternary TaON/Bi₂O₃/S-BiOCl heterostructures, which were obtained by the simultaneous coprecipitation and ripening process. Current investigation suggests that such a unique TaON/Bi₂O₃/S-BiOCl exhibits a relatively much higher photocatalytic activity for visible light-driven removal of rhodamine B (RhB), tetracycline (TC) and tetracycline hydrochloride (TC-HCl) than those of hybrid Bi₂O₃/S-BiOCl and pristine S-BiOCl. It is ascribed to the synergetic effect on the introduction of S dopant level in BiOCl lattice as well as the construction of intimate double heterointerfaces among Bi₂O₃, TaON and S-BiOCl, which endows the TaON/Bi₂O₃/S-BiOCl photocatalysts with considerable advantages for highly elevating photocatalytic performances, such as the intensive optical absorption, high redox potential as well as high-efficient photocharge separation originated from type-I and Z-scheme pathways. This work delivers novel insights for design and one-pot preparation of high-active BiOX (X = Cl, Br and I)-based photocatalysts towards organic dye and antibiotic removal in the future research.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview

Recently, halides (silver halides, AgX; perosvkite halides, ABX₃) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX₃ and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX₃ and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.

Bismuth Oxyhalide-Based Materials (BiOX: X = Cl, Br, I) and Their Application in Photoelectrocatalytic Degradation of Organic Pollutants in Water: A Review

An important target of photoelectrocatalysis (PEC) technology is the development of semiconductor-based photoelectrodes capable of absorbing solar energy (visible light) and promoting oxidation and reduction reactions. Bismuth oxyhalide-based materials BiOX (X = Cl, Br, and I) meet these requirements. Their crystalline structure, optical and electronic properties, and photocatalytic activity under visible light mean that these materials can be coupled to other semiconductors to develop novel heterostructures for photoelectrochemical degradation systems. This review provides a general overview of controlled BiOX powder synthesis methods, and discusses the optical and structural features of BiOX-based materials, focusing on heterojunction photoanodes. In addition, it summarizes the most recent applications in this field, particularly photoelectrochemical performance, experimental conditions and degradation efficiencies reported for some organic pollutants (e.g., pharmaceuticals, organic dyes, phenolic derivatives, etc.). Finally, as this review seeks to serve as a guide for the characteristics and various properties of these interesting semiconductors, it discusses future PEC-related challenges to explore.

Nanomaterials for Photocatalytic Degradations of Analgesic, Mucolytic and Anti-Biotic/Viral/Inflammatory Drugs Widely Used in Controlling SARS-CoV-2

The COVID-19 pandemic has been transformed into one of the main worldwide challenges, in recent years. For controlling symptoms that are caused by this disease (e.g., chills or fever, shortness of breath and/or difficulty in breathing, cough, sore throat, fatigue, headache, muscle aches, the new loss of tastes and/or smells, congestion or runny nose, nausea, vomiting and/or diarrhea), lots of medicines including analgesics, mucolytics, and anti-biotic/viral/inflammatory drugs have been frequently prescribed. As these medicines finally contaminate terrestrial and aquatic habitats by entering surface waterways through pharmaceutical production and excreting trace amounts of waste after human usage, they have negative impacts on wildlife’s health and ecosystem. Residual drugs in water have the potential to harm aquatic creatures and disrupt their food chain as well as the breeding cycle. Therefore, proper degradation of these broadly used medicines is highly crucial. In this work, the use of nanomaterials applicable in photocatalytic degradations of analgesics (e.g., acetaminophen, aspirin, ibuprofen, and naproxen), mucolytics (e.g., ambroxol), antibiotics (e.g., azithromycin and quinolones including hydroxychloroquine and chloroquine phosphate), anti-inflammatory glucocorticoids (e.g., dexamethasone and cortisone acetate), antihistamines (e.g., diphenhydramine), H2 blockers (e.g., famotidine), anthelmintics (e.g., praziquantel), and finally antivirals (e.g., ivermectin, acyclovir, lopinavir/ritonavir, favipiravir, nitazoxanide, and remdesivir) which widely used in controlling/treating the coronavirus have been reviewed and discussed.

Structural engineering of BiOBr nanosheets for boosted photodegradation performance toward rhodamine B

A series of BiOBr nanosheets were synthesized through a facile solvothermal method, whose structures were adjusted by changing solvent ratios. Their photodegradation properties toward rhodamine B (RhB) were further investigated under visible light irradiation. The photocatalytic results indicated that the B-1:3 sample showed superior photoactivity and the RhB removal efficiency attained 97% within 30 min. The outstanding photodegradation activity can be ascribed to the small particle size and thickness, suppressed e--h+ pair recombination and more active electrons and holes. Moreover, free radical quenching experiments suggest that ·O2 - and h+ play a crucial role in improving photoactivity. This work opens a new avenue to boost the removal rate of organic pollutants by engineering the solvent ratios of photocatalysts in the wastewater treatment field.

Coupling photocatalytic and electrocatalytic oxidation towards simultaneous removal of humic acid and ammonia-nitrogen in landscape water

Aiming to bring photocatalytic and electrocatalytic oxidation processes into solving practical issue of organics and ammonia-nitrogen pollution in landscape water that resulting in algae bloom and eutrophication, this work firstly investigates photocatalytic oxidation of humic acid and electrochemical oxidation of ammonia upon optimization of each process parameters, respectively. The platinum modified titania (Pt/TiO₂) exhibits improved activity than pure titania and CuO_x, MnO_x and NiO_x modified titania for decomposition of humic acid. As an application-oriented study, this work has developed a simple and effective brushing and annealing method for immobilization of TiO₂ and Pt/TiO₂ onto ceramic foam for further application. In addition, the RuO₂-IrO₂/Ti electrode presents the best electrocatalytic activity compared with RuO₂/Ti and IrO₂/Ti electrodes in terms of ammonia oxidation, and the ammonia conversion pathways have been studied. Lastly, an integrated and enlarged reactor system employing optimized photocatalytic ceramic foam and stable electrodes has been developed for simultaneous oxidation of humic acid and ammonia-nitrogen in water circulated flow condition, based on cooperative production of reactive oxidant species between photocatalysis and electrocatalysis. The results show that coupled photocatalytic and electrocatalytic oxidation is a promising approach for treatment of organic matter and inorganic ammonia nitrogen in landscape water.

Self-Assembly of a 3D Hollow BiOBr@Bi-MOF Heterostructure with Enhanced Photocatalytic Degradation of Dyes

Considering the flexibility, adjustable pore structure, and abundant active sites of metal-organic frameworks (MOFs), rational design and fine control of the MOF-based hetero-nanocrystals is a highly important and challenging subject. In this work, self-assembly of a 3D hollow BiOBr@Bi-MOF microsphere was fabricated through precisely controlled dissociation kinetics of the self-sacrificial template (BiOBr) for the first time, where the residual quantity of BiOBr and the formation of Bi-MOF were carefully regulated by changing the reaction time and the capability of coordination. Meanwhile, the hollow microstructure was formed in BiOBr@Bi-MOF through the Oswald ripening mechanism to separate photogenerated electron-hole pairs and increase the adsorption capacity of Bi-MOF for dyes, which significantly enhanced the photocatalytic degradation efficiency of RhB from 56.4% for BiOBr to 99.4% for the optimal BiOBr@Bi-MOF microsphere. This research broadens the selectivity of semiconductor/MOF hetero-nanocrystals with reasonable design and flexible synthesis.