Advanced materials for immobilization of purple phototrophic bacteria in bioremediation of oil-polluted wastewater

Water reuse of treated domestic wastewater in agriculture: Effects on tomato plants, soil nutrient availability and microbial community structure

The reuse of treated wastewater (TWW) in agriculture for crop irrigation is desirable. Crop responses to irrigation with TWW depend on the characteristics of TWW and on intrinsic and extrinsic soil properties. The aim of this study was to assess the response of tomato (Solanum lycopersicum L.) cultivated in five different soils to irrigation with TWW, compared to tap water (TAP) and an inorganic NPK solution (IFW). In addition, since soil microbiota play many important roles in plant growth, a metataxonomic analysis was performed to reveal the prokaryotic community structures of TAP, TWW and IFW treated soil, respectively. A 56-days pot experiment was carried out. Plant biometric parameters, and chemical, biochemical and microbiological properties of different soils were investigated. Shoot and root dry and fresh weights, as well as plant height, were the highest in plants irrigated with IFW followed by those irrigated with TWW, and finally with TAP water. Plant biometric parameters were positively affected by soil total organic carbon (TOC) and nitrogen (TN). Electrical conductivity was increased by TWW and IFW, being such an increase proportional to clay and TOC. Soil available P was not affected by TWW, whereas mineral N increased following their application. Total microbial biomass, as well as, main microbial groups were positively affected by TOC and TN, and increased according to the following order: IFW > TWW > TAP. However, the fungi-to-bacteria ratio was lowered in soil irrigated with TWW because of its adverse effect on fungi. The germicidal effect of sodium hypochlorite on soil microorganisms was affected by soil pH. Nutrients supplied by TWW are not sufficient to meet the whole nutrients requirement of tomato, thus integration by fertilization is required. Bacteria were more stimulated than fungi by TWW, thus leading to a lower fungi-to-bacteria ratio. Interestingly, IFW and TWW treatment led to an increased abundance of Proteobacteria and Acidobacteria phyla and Balneimonas, Rubrobacter, and Steroidobacter genera. This soil microbiota structure modulation paralleled a general decrement of fungi versus bacteria abundance ratio, the increment of electrical conductivity and nitrogen content of soil and an improvement of tomato growth. Finally, the potential adverse effect of TWW added with sodium chloride on soil microorganisms depends on soil pH.

Sustainable permeable biobarriers for atrazine removal in packed bed biofilm reactors

The synergy between two supported bacterial biofilms of S. equisimilis and P. putida and a sustainable biocarrier (raw pine) was studied, working both as biobarriers for the treatment of water contaminated with atrazine. Firstly, the effects of ATZ exposure on bacterial growth were evaluated, with Gram-positive S. equisimilis being a more tolerant bacterium to higher amounts of the herbicide. The bioremoval of ATZ by S. equisimilis concentrated biomass was then assessed, reaching around 83.5% after 15 days due to the potential degradation by the biomass and biosorption by the solids, with overlapping of both mechanisms. The optimization of bacterial biofilm attachment onto raw pine prior to bioremoval assays in lab-scale packed bed biofilm reactors was performed by varying initial biomass concentration, inocula growth time and hydrodynamic conditions. Lastly, the optimized biosystems were tested as sustainable remediation designs to treat water contaminated with the selected herbicide. Results reveal an added beneficial effect towards the bioremoval of atrazine using supported biofilms onto raw pine, reaching 90.42% and 79.71% by S. equisimilis and P. putida biofilms, respectively, over 58.31% increase when compared to sorption on fixed bed of pine. The coupling of biosorption/biodegradation favors the bioremoval process significantly.

The application of biosurfactant-producing bacteria immobilized in PVA/SA/bentonite bio-composite for hydrocarbon-contaminated soil bioremediation

Oil spills that contaminate the environment can harm the surrounding ecosystem. The oil contains petroleum hydrocarbon which is toxic to the environment hence it needs to be removed. The use of bacteria as remediation media was modified by immobilizing into a matrix hence the bacteria can survive in harsh conditions. In this research, the ability of biosurfactant-producing bacteria (Pseudomonas aeruginosa, Bacillus subtilis, and Ralstonia pickettii) immobilized in the PVA/SA/bentonite matrix was tested in remediation on oil-contaminated soil. The immobilized beads filled with bacteria were added to the original soil sample, as well as washed soil. The beads were characterized by using FTIR and SEM. Based on FTIR analysis, the PVA/SA/bentonite@bacteria beads had similar functional groups compared to each other. SEM analysis showed that the beads had non-smooth structure, while the bacteria were spread outside and agglomerated. Furthermore, GC-MS analysis results showed that immobilized B. subtilis and R. pickettii completely degraded tetratriacontane and heneicosane, respectively. Meanwhile, after soil washing pre-treatment, immobilized bacteria could completely degrade octadecane (P. aeruginosa and R. pickettii) and tetratriacontane (P. aeruginosa and B. subtilis). Based on those results, immobilized bacteria could degrade oil compounds. The degradation result was influenced by the enzymes produced, the ability of the bacteria, the suitability of the test media, and the matrix used. Therefore, this study can be a reference for further soil remediation using eco-friendly methods.

Enhanced bio-affinity of magnetic QD-P(St-GMA)@Fe3O4 micro-particles via surface-quaternized modification

In this work, a kind of bio-carrier quaternized-polystyrene-polyglycidyl methacrylate@Fe₃O₄ (QD-P(St-GMA)@Fe₃O₄, QD-PSGF) micro-particles was successfully prepared by modifying PSGF micro-particles through a hydrothermal method. The quaternary ammonium group and surface structure of QD-PSGF were confirmed through several characterization methods. We directly verified the efficacy of the quaternary ammonium group in promoting microbial activity due to QD-PSGF being synthesized by a hydrothermal method without changing the surface topography and pore. The bio-affinity of QD-PSGF microspheres was evaluated by bacterial adhesion and anaerobic digestion experiments. The results showed that a little quaternary ammonium group can increase bacterial adhesion by about 2-3 times and methane production by 40%. The novel developed QD-PSGF micro-particles can be a promising material as a biofilm carrier for bio-application.

Improving mass transfer rates in microbial cell immobilization system for environmental applications: Synergistic interaction of cells on crude oil biodegradation

Among the various techniques used to clean up polluted environments, bioremediation is the most cost-effective and eco-friendly option. The diversity of microbial communities in a consortium can significantly affect the biodegradability of hazardous organic pollutants, particularly for in situ bioremediation processes. This is largely attributed to interactions between members of a consortium. In this study, the effect of internal diffusion limitations in substrate model biodegradation was firstly examined by immobilized bacterial cells at different particle sizes produced by the electrospray technique. According to the obtained results, for particles with large size, the effectiveness factors (η) were about 0.58-0.67, and the resistance to diffusive on the biodegradation rate was significant, while with decreasing the particle size, η increases and approaches about 1. After selection of suitable bead size, heavy crude oil biodegradation was investigated using a consortium consisting of three oil-degrading bacterial strains at different treatment systems. The removal rate in the suspended co-culture system stands at minimum value of 38% with all three strains which is an indicator of negative interactions among consortium members. Independent immobilization of microorganisms minimizes the competition and antagonistic interactions between strains and leads to more crude oil removal, so that, the biodegradation rate reached 60%.

Supramolecular bioamphiphile facilitated bioemulsification and concomitant treatment of recalcitrant hydrocarbons in petroleum refining industry oily waste

Bioremediation of real-time petroleum refining industry oily waste (PRIOW) is a major challenge due to the poor emulsification potential and oil sludge disintegration efficiency of conventional bioamphiphile molecules. The present study was focused on the design of a covalently engineered supramolecular bioamphiphile complex (SUBC) rich in hydrophobic amino acids for proficient emulsification of hydrocarbons followed by the concomitant degradation of total petroleum hydrocarbons (TPH) in PRIOW using the hydrocarbonoclastic microbial bio-formulation system. The synthesis of SUBC was carried out by pH regulated microbial biosynthesis process and the yield was obtained to be 450.8 mg/g of petroleum oil sludge. The FT-IR and XPS analyses of SUBC revealed the anchoring of hydrophilic moieties of monomeric bioamphiphilic molecules, resulting in the formation of SUBC via covalent interaction. The SUBC was found to be lipoprotein in nature. The maximum loading capacity of SUBC onto surface modified rice hull (SMRH) was achieved to be 45.25 mg/g SMRH at the optimized conditions using RSM-CCD design. The SUBC anchored SMRH was confirmed using SEM, FT-IR, XRD and TGA analyses. The adsorption isotherm models of SUBC onto SMRH were performed. The integrated approach of SUBC-SMRH and hydrocarbonoclastic microbial bio-formulation system, emulsified oil from PRIOW by 92.86 ± 2.26% within 24 h and degraded TPH by 89.25 ± 1.75% within 4 days at the optimum dosage ratio of SUBC-SMRH (0.25 g): PRIOW (1 g): mass of microbial-assisted biocarrier material (0.05 g). The TPH degradation was confirmed by SARA fractional analysis, FT-IR, ¹H NMR and GC-MS analyses. The study suggested that the application of covalently engineered SUBC has resulted in the accelerated degradation of real-time PRIOW in a very short duration without any secondary sludge generation. Thus, the SUBC integrated approach can be considered to effectively manage the hydrocarbon contaminants from petroleum refining industries under optimal conditions.

Polycyclic aromatic hydrocarbon sequestration by intertidal phototrophic biofilms cultivated in hydrophobic and hydrophilic biofilm-promoting culture vessels

Phototrophic biofilms collected from intertidal sediments of the world's largest tidal mangrove forest were cultured in two sets of a biofilm-promoting culture vessel having hydrophilic glass surface and hydrophobic polymethyl methacrylate surface wherein 16 priority polycyclic aromatic hydrocarbons (PAHs) were spiked. Biofilms from three locations of the forest were most active in sequestering 98-100% of the spiked pollutants. PAH challenge did not alter the biofilm phototrophic community composition; rather biofilm biomass production and synthesis of photosynthetic pigments and extracellular polymeric substances (EPS) were enhanced. Photosynthetic pigment and EPS synthesis were sensitive to vessel-surface property. The lowest mean residual amounts of PAHs in the liquid medium as well as inside the biofilm were recorded in the very biofilm cultivated in the hydrophobic flask where highest values of biofilm biomass, total chlorophyll, released polysaccharidic (RPS) carbohydrates, RPS uronic acids, capsular polysaccharidic (CPS) carbohydrates, CPS proteins, CPS uronic acids and EPS hydrophobicity were obtained. Ratios of released RPS proteins: polysaccharides increased during PAH sequestration whereas the ratios of CPS proteins: polysaccharides remained constant. Efficacious PAH removal by the overlying phototrophic biofilm will reduce the entry of these contaminants in the sediments underneath and this strategy could be a model for "monitored natural recovery".

Calcium ion biorecovery from industrial wastewater by Bacillus amyloliquefaciens DMS6

Calcium ions in industrial wastewater needs to be removed to prevent the production of limescale, which can have negative consequences. Biomineralization has become the focus due to its lower costs than traditional methods of remediation. In this study, calcium ions were bio-precipitated under the action of free and immobilized Bacillus amyloliquefaciens DMS6 bacteria, and the calcium ion removal efficiency was also compared. The results show that it only needed 3 days to decrease the calcium ion concentration to an ideal level of 76-116 mg/L under the action of DMS6 bacteria immobilized by activated carbon fiber, with calcium ion removal ratios reaching 99%-95% by the 7^th day. DMS6 bacteria immobilized by activated carbon fiber were superior to free bacteria and bacteria immobilized by sodium alginate in calcium ion removal. Calcium ions are biomineralized into calcite, Mg-rich calcite, aragonite and monohydrocalcite with abundant organic functional groups, 4 types of secondary protein structures, amino acids, phospholipids, negative stable carbon isotope δ¹³C_PDB values (-16.68‰ to-17.25‰) and negatively charged biomineral surface. Calcium ions were diffused into cells and took part in the intracellular biomineralization of monohydrocalcite, also facilitating calcium ion removal. The formation of intracellular monohydrocalcite has rarely been reported. This study demonstrates an economic and environmentally friendly method to remove calcium ions from industrial wastewater.

Enhanced oil removal from a real polymer production plant by cellulose nanocrystals-serine incorporated polyethersulfone ultrafiltration membrane

As discharging oily wastewater from industries to the environment is a potential threat for the aquatic ecosystem, in this research, oil removal from a real case of Kermanshah polymer production plant wastewater was investigated. The focus of this study was on improving the oil rejection performance of polyethersulfone (PES) ultrafiltration membrane due to adding cellulose nanocrystals (CNC) and modified CNC with serine amino acid (CNC-Ser) in PES mix matrix. From the results, the membranes embedded with CNC-Ser showed better performance in terms of water flux, flux recovery ratio, and oil rejection (higher than 97%) compared to the modified membranes with CNC. The lowest water contact angle (41.37°), smoother surface, and higher negative surface potential (- 24 mV) were achieved for the optimum loading of CNC-Ser. Besides, long-term performance of the membranes with optimum loading of CNC and CNC-Ser were compared in both dead-end and cross-flow setups.

Utilization of a double-cross-linked amino-functionalized three-dimensional graphene networks as a monolithic adsorbent for methyl orange removal: Equilibrium, kinetics, thermodynamics and artificial neural network modeling

Herein, it is aimed to develop a high-performance monolithic adsorbent to be utilized in methyl orange (MO) adsorption. Therefore, amino-functionalized three-dimensional graphene networks (3D-GN_f) fulfilling the requirements of reusability and high capacity have been fabricated via hydrothermal self-assembly approach followed by a double-crosslinking strategy. The potential utilization of 3D-GN_f as an adsorbent for removal MO has been assessed using both batch-adsorption studies and an artificial neural network (ANN) approach. Graphene oxide sheets have been amino-functionalized and cross-linked, by ethylenediamine (EDA) during hydrothermal treatment, following the glutaraldehyde has used as a double-crosslinking agent to facilitate the crosslinking of architecture. The successful fabrication of 3D-GN_f has been confirmed by field-emission scanning electron microscopy (FESEM), Fourier transform infrared (FT-IR), Raman and X-ray photoelectron spectroscopy (XPS). Moreover, N₂ adsorption/desorption isotherms have revealed the high specific surface area (1015 m² g^-1) with high pore volume (1.054 cm³ g^-1) and hierarchical porous structure of 3D-GN_f. The effect of initial concentration, contact time, and temperature on adsorption capacity have been thoroughly studied, and the kinetics, isotherms, and thermodynamics of MO adsorption have been modelled. The MO adsorption has been well defined by the pseudo-second-order kinetic model and Langmuir isotherm model with a monolayer adsorption capacity of 270.27 mg g^-1 at 25 °C. The thermodynamic findings have revealed MO adsorption has occurred spontaneously with an endothermic process. The Levenberg-Marquardt backpropagation algorithm has been implemented to train the ANN model, which has used the activation functions of tansig and purelin functions at the hidden and output layers, respectively. An optimum ANN model with high-performance metrics (coefficient of determination, R² = 0.9995; mean squared error, MSE = 0.0008) composed of three hidden layers with 5 neurons in each layer was constructed to forecast MO adsorption. The findings have shown that experimental results are consistent with ANN-based data, implying that the suggested ANN model may be used to forecast cationic dye adsorption.

Ammonia assimilation: A double-edged sword influencing denitrification of Rhodobacter azotoformans and for nitrogen removal of aquaculture wastewater

NO₃^--N and NH₄⁺-N are two prevalent nitrogenous pollutants in aquaculture wastewater posing a significant health risk to aquatic animals. R. azotoformans ATCC17025 can rapidly denitrify to remove NO₃^--N, assimilating NH₄⁺-N. The study investigated the influence of ammonia assimilation on bacterial denitrification. Results revealed that low concentration of NH₄⁺-N (≤0.3 mM) accelerated denitrification, whereas high concentration inhibited it. RT-qPCR indicated that the inhibition of NO reduction under high concentration of NH₄⁺-N was the primary cause of denitrification depression, whereas low concentration of NH₄⁺-N enhanced the synthesis of practically all enzymes involved in denitrification. Finally, nitrogen-rich aquaculture effluent was effectively treated in lab-scale using a semi-continuous operation that provided an appropriate NH₄⁺-N concentration for denitrification. This semi-continuous operation treated wastewater 2 times faster than the batch operation and the content of nitrogen decreased to effluent standard. The study can provide guidance for nitrogen removal of aquaculture wastewater with bioaugmentation.

Bioremediation of oily seawater by Bacteria immobilization on a novel carrier material containing nutrients

A novel carrier material was obtained by coating puffed rhubarb rice (PRR) with calcium alginate (CA) membrane. The carrier material was prepared to contain oil-degrading bacterial strains and inorganic nutrients through entrapping them in different locations. This formulation possessed floatability, biodegradability and nutrient slow-release properties. Therefore, it could be applied for oil biodegradation on seawater surfaces. For controlling the release rate of nutrients, the optimal preparation technique was established. The number of viable cells immobilized on the carrier material reached 2 × 10⁹ CFU/g. This formulation could be stored at -20 °C for three months without a significant decrease in the number of viable immobilized cells (4 × 10⁸ CFU/g). Scanning electron microscope (SEM) results showed that the cells were immobilized on the outer CA membrane, and the inorganic nutrients were entrapped in the inner PRR and CA membrane. The immobilized cells were able to remove 86% of the diesel oil at an initial diesel oil concentration of 1% (v/v), an incubation temperature of 37 °C, during three days of incubation. Gas chromatography-mass spectrometry (GC-MS) analysis results showed that most components of diesel oil were degraded by the formulations.

Development of autotrophic and heterotrophic consortia via immobilized microbial beads for chemical wastewater treatment, using PTA wastewater as an approach

Studies on the symbiosis of microalgae-bacteria have been accelerating as a mean for wastewater remediation. However, there were few reports about the microalgae-bacteria consortia for chemical wastewater treatment. The aim of the present study is to develop an autotrophic and heterotrophic consortium for chemical wastewater treatment and probe whether and how bacteria could benefit from the microalgae during the treatment process, using PTA wastewater as an approach. A process-dependent strategy was applied. First of all, the results showed that the sludge beads with the sludge concentration of 30 g/L were the optimal one with the COD removal rate at 84.8% but the ceiling effect occurred (COD removal rate < 90%) even several common reinforcement methods were applied. Additionally, by adding the microalgae Chlorella vulgaris, a microalgae-activated sludge consortium was formed inside the immobilized beads, which provided better performance to shatter the ceiling effect. The COD remove rate was higher than 90%, regardless of the activated sludge was pre-culture or not. COD removal capacity could also be improved (COD removal rate > 92%) when LEDs light belt was offered as an advanced light condition. Biochemical assay and DNA analysis indicated that the microalgae could form an internal circulation of substances within the activated sludge and drove the microbial community to success and the corresponding gene functions, like metabolism and.

Bacterial consortium biotransformation of pentachlorophenol contaminated wastewater

The aims of this study were (i) to compare PCP removal (100 mg L^-1) by two bacterial consortia B₁ and B₂ in sterile wastewater (STWW) and liquid mineral medium (MSM), (ii) PCP effect in biofilm formation and antimicrobial susceptibility. PCP removal was measured by high-performance liquid chromatography (HPLC) during 168 h at 30 °C. Biofilm formation was assessed with two approaches: Congo Red Agar and Microtiter-plate. Antimicrobial susceptibility was determined by the agar disc diffusion technique. The results showed that the PCP removal for consortium B₁ and B₂ after 168 h was 70 and 97.5% in STWW; 62.2 and 85.5% in MSM, respectively. In addition, PCP addition showed an increase in biofilm development especially for B₂ consortium around 3.5 nm in 100 mg L^-1 PCP. PCP added in the Muller Hinton (MH) medium and Gentamicin disc showed a clear increase in diameter of cell lysis around 2 to 4.5 cm.

Removal of Cadmium, Copper, and Lead From Water Using Bio-Sorbent From Treated Olive Mill Solid Residue

Olive Mill Solid Residue (OMSR) can be utilized as a bio-sorbent in wastewater treatment. Even though several studies on OMSR as a bio-sorbent were carried out, there is still a need to investigate a simple and relatively inexpensive OMSR treatment that increases pollutant removal. In this study; OMSR is used in batch experiments to remove toxic heavy metals from aqueous solutions including Cd²⁺, Cu²⁺, and Pb²⁺ ions. The effect of OMSR treatment (untreated; OMSR-U, treated with n-hexane; OMSR-H, and treated with water; OMSR-W) was investigated by chemical oxygen demand and cation exchange capacity. It was confirmed by both tests that OMSR-W was the best treatment. The same result was re-confirmed by batch uptake experiments of the heavy metal ions. Using OMSR-W as a bio-sorbent; the effect of several parameters such as pH, contact time, bio-sorbent concentration, metal ions concentration, and the presence of other metal species were studied to figure their influence on the metal ions uptake. The optimum conditions for single metal systems were found to occur at pH 5.5, an initial metal concentration of 50 mg/L, a shaking time of 60 minutes, a bio-sorbent concentration of 20 g/L. In binary metal ions solutions; Cd²⁺ uptake was increased in presence of Cu²⁺ or Pb²⁺. However, the uptake of Cu²⁺ and Pb²⁺ was decreased in presence of other metals. The equilibrium sorption data for single metal systems were described by the Langmuir isotherm model. The highest value of maximum uptake was found for Pb²⁺ (4.587 mg/g) followed by Cd²⁺ (4.525 mg/g) and Cu²⁺ (4.367 mg/g). These results show that OMSR-W, which has a very low economical value, could be used for the treatment of wastewater contaminated with heavy metals.