Sustainable recovery of neodymium and dysprosium from waters through seaweeds: Influence of operational parameters

Can exposure to Gymnodinium catenatum toxic blooms influence the impacts induced by Neodymium in Mytilus galloprovincialis mussels? What doesn't kill can make them stronger?

The presence in marine shellfish of toxins and pollutants like rare earth elements (REEs) poses a major threat to human well-being, coastal ecosystems, and marine life. Among the REEs, neodymium (Nd) stands out as a widely utilized element and is projected to be among the top five critical elements by 2025. Gymnodinum catenatum is a phytoplankton species commonly associated with the contamination of bivalves with paralytic shellfish toxins. This study evaluated the biological effects of Nd on the mussel species Mytilus galloprovincialis when exposed to G. catenatum cells for fourteen days, followed by a recovery period in uncontaminated seawater for another fourteen days. After co-exposure, mussels showed similar toxin accumulation in the Nd and G. catenatum treatment in comparison with the G. catenatum treatment alone. Increased metabolism and enzymatic defenses were observed in organisms exposed to G. catenatum cells, while Nd inhibited enzyme activity and caused cellular damage. Overall, this study revealed that the combined presence of G. catenatum cells and Nd, produced positive synergistic effects on M. galloprovincialis biochemical responses compared to G. catenatum alone, indicating that organisms' performance may be significantly modulated by the presence of multiple co-occurring stressors, such those related to chemical pollution and harmful algal blooms. ENVIRONMENTAL IMPLICATIONS: Neodymium (Nd) is widely used in green technologies like wind turbines, and this element's potential threats to aquatic environments are almost unknown, especially when co-occurring with other environmental factors such as blooms of toxic algae. This study revealed the cellular impacts induced by Nd in the bioindicator species Mytilus galloprovincialis but further demonstrated that the combination of both stressors can generate a positive defense response in mussels. The present findings also demonstrated that the impacts caused by Nd lasted even after a recovery period while a previous exposure to the toxins generated a faster biochemical improvement by the mussels.

Eco-friendly methodology for removing and recovering rare earth elements from saline industrial wastewater

In this study, response surface methodology (RSM) was applied with a Box-Behnken design to optimize the biosorption (removal and bioconcentration) of rare earth elements (REEs) (Y, La, Ce Eu, Gd, Tb) by living Ulva sp. from diluted industrial wastewaters (also containing Pt and the classic contaminants Hg, Pb, Zn, Cu, Co, and Cd). Element concentration (A: 10-190 μg/L), wastewater salinity (B: 15-35), and Ulva sp. dosage (C: 1.0-5.0 g/L) were the operating parameters chosen for optimization. Analysis of the Box-Behnken central point confirmed the reproducibility of the methodology and p-values below 0.0001 validated the developed mathematical models. The largest inter-element differences were observed at 24 h, with most REEs, Cu, Pb and Hg showing removals ≥ 50 %. The factor with the greatest impact (positive) on element removal was the initial seaweed dosage (ANOVA, p < 0.05). The optimal conditions for REEs removal were an initial REEs concentration of 10 μg/L, at a wastewater salinity of 15, and an Ulva sp. dosage of 5.0 g/L, attaining removals up to 88 % in 24 h. Extending the time to 96 h allowed seaweed dosage to be reduced to 4.2 g/L while achieving removals ≥ 90 %. The high concentrations in REE-enriched biomass (∑REEs of 3222 μg/g), which are up to 3000 times higher than those originally found in water and exceed those in common ores, support their use as an alternative source of these critical raw materials.

The Remediation of Dysprosium-Containing Effluents Using Cyanobacteria Spirulina platensis and Yeast Saccharomyces cerevisiae

Dysprosium is one of the most critical rare earth elements for industry and technology. A comparative study was carried out to assess the biosorption capacity of cyanobacteria Spirulina platensis and yeast Saccharomyces cerevisiae toward dysprosium ions. The effect of experimental parameters such as pH, dysprosium concentration, time of contact, and temperature on the biosorption capacity was evaluated. Biomass before and after dysprosium biosorption was analyzed using neutron activation analysis and Fourier-transform infrared spectroscopy. For both biosorbents, the process was quick and pH-dependent. The maximum removal of dysprosium using Spirulina platensis (50%) and Saccharomyces cerevisiae (68%) was attained at pH 3.0 during a one-hour experiment. The adsorption data for both biosorbents fitted well with the Langmuir isotherm model, whereas the kinetics of the process followed the pseudo-second-order and Elovich models. The maximum biosorption capacity of Spirulina platensis was 3.24 mg/g, and that of Saccharomyces cerevisiae was 5.84 mg/g. The thermodynamic parameters showed that dysprosium biosorption was a spontaneous process, exothermic for Saccharomyces cerevisiae and endothermic for Spirulina platensis. Biological sorbents can be considered an eco-friendly alternative to traditional technologies applied for dysprosium ion recovery from wastewater.

Superparamagnetic Spinel-Ferrite Nano-Adsorbents Adapted for Hg2+, Dy3+, Tb3+ Removal/Recycling: Synthesis, Characterization, and Assessment of Toxicity

In the present work, superparamagnetic adsorbents based on 3-aminopropyltrimethoxy silane (APTMS)-coated maghemite (γFe₂O₃@SiO₂-NH₂) and cobalt ferrite (CoFe₂O₄@SiO₂-NH₂) nanoparticles were prepared and characterized using transmission-electron microscopy (TEM/HRTEM/EDXS), Fourier-transform infrared spectroscopy (FTIR), specific surface-area measurements (BET), zeta potential (ζ) measurements, thermogravimetric analysis (TGA), and magnetometry (VSM). The adsorption of Dy³⁺, Tb³⁺, and Hg²⁺ ions onto adsorbent surfaces in model salt solutions was tested. The adsorption was evaluated in terms of adsorption efficiency (%), adsorption capacity (mg/g), and desorption efficiency (%) based on the results of inductively coupled plasma optical emission spectrometry (ICP-OES). Both adsorbents, γFe₂O₃@SiO₂-NH₂ and CoFe₂O₄@SiO₂-NH₂, showed high adsorption efficiency toward Dy³⁺, Tb³⁺, and Hg²⁺ ions, ranging from 83% to 98%, while the adsorption capacity reached the following values of Dy³⁺, Tb³⁺, and Hg²⁺, in descending order: Tb (4.7 mg/g) > Dy (4.0 mg/g) > Hg (2.1 mg/g) for γFe₂O₃@SiO₂-NH₂; and Tb (6.2 mg/g) > Dy (4.7 mg/g) > Hg (1.2 mg/g) for CoFe₂O₄@SiO₂-NH₂. The results of the desorption with 100% of the desorbed Dy³⁺, Tb³⁺, and Hg²⁺ ions in an acidic medium indicated the reusability of both adsorbents. A cytotoxicity assessment of the adsorbents on human-skeletal-muscle derived cells (SKMDCs), human fibroblasts, murine macrophage cells (RAW264.7), and human-umbilical-vein endothelial cells (HUVECs) was conducted. The survival, mortality, and hatching percentages of zebrafish embryos were monitored. All the nanoparticles showed no toxicity in the zebrafish embryos until 96 hpf, even at a high concentration of 500 mg/L.

Algal sorbents and prospects for their application in the sustainable recovery of rare earth elements from E-waste

Efficient and sustainable secondary sourcing of Rare-Earth Elements (REE) is essential to counter supply bottlenecks and the impacts associated with primary mining. Recycled electronic waste (E-waste) is considered a promising REE source and hydrometallurgical methods followed by chemical separation techniques (usually solvent extraction) have been successfully applied to these wastes with high REE yields. However, the generation of acidic and organic waste streams is considered unsustainable and has led to the search for "greener" approaches. Sorption-based technologies using biomass such as bacteria, fungi and algae have been developed to sustainably recover REE from e-waste. Algae sorbents in particular have experienced growing research interest in recent years. Despite its high potential, sorption efficiency is strongly influenced by sorbent-specific parameters such as biomass type and state (fresh/dried, pre-treatment, functionalization) as well as solution parameters such as pH, REE concentration, and matrix complexity (ionic strength and competing ions). This review highlights differences in experimental conditions among published algal-based REE sorption studies and their impact on sorption efficiency. Since research into algal sorbents for REE recovery from real wastes is still in its infancy, aspects such as the economic viability of a realistic application are still unexplored. However, it has been proposed to integrate REE recovery into an algal biorefinery concept to increase the economics of the process (by providing a range of additional products), but also in the prospect of achieving carbon neutrality (as large-scale algae cultivation can act as a CO₂ sink).

Antarctic toothfish Dissostichus mawsoni as a bioindicator of trace and rare earth elements in the Southern Ocean

The Antarctic toothfish Dissostichus mawsoni is a Southern Ocean long-lived top predator which is regularly captured on an annual fishery operating in the region. By its biological and ecological characteristics, it is a potential bioindicator for the concentrations of trace and rare earth elements in the Antarctic. As these elements are mainly transferred through the diet and a deficiency or excess of these elements can lead to diverse health problems, it is important to measure their concentrations on the organisms. This study provides, for the first time, the concentration of 27 trace (major essential, minor essential and non-essential) and rare earth elements in the muscle of D. mawsoni captured in three areas of the Amundsen and Dumont D'Urville Seas (Antarctica). Major essential elements had the highest concentrations, with potassium (K) as the most concentrated, and rare earth elements the lowest. Significant differences between areas were found for most of the studied elements. No bioaccumulation nor biomagnification potential was found for the studied elements, with several elements decreasing concentrations towards larger individuals. Decreasing trends are related with the different habitats occupied by D. mawsoni through their life, suggesting that elements' concentrations in the water is determinant for the concentrations in this top predator, and/or there is a dilution effect as the fish grows. Our results also support that Se presents a detoxification potential for Hg in D. mawsoni, but only when Hg concentrations are higher to unhealthy levels. This study supports D. mawsoni as a potential bioindicator for the concentrations of the different trace and rare earth elements in the Southern Ocean, though only when comparing individuals of similar size/age, but also to evaluate annual changes on their concentrations. Furthermore, D. mawsoni can be a good source of major essential elements to humans with concentrations of major essential elements above some of other marine fish worldwide.

Application of response surface methodology and box-behnken design for the optimization of mercury removal by Ulva sp

Mercury (Hg) is a global and top priority contaminant, toxic at low concentrations. Although it has been progressively eliminated from processes, this metal continues to circulate in the atmosphere, soil, and water. In this work, the Response Surface Methodology (RSM) combined with a Box-Behnken Design (3 factors - 3 levels) was used to optimize key operational conditions that influence the removal and uptake of Hg by living macroalga Ulva sp. in a complex mixture containing several elements used in industry (potentially toxic elements, rare earth elements, and platinum-group elements) (initial concentration 10, 100 and 190 µg/L, salinity 15, 25 and 35, seaweed stock density 1.0, 3.0 and 5.0 g/L). Results evidenced the great capability of Ulva sp. to remove Hg, with removal efficiencies between 69 % and 97 %. 3-D surfaces showed that the most impactful variable was seaweed stock density, with higher densities leading to higher removal. Regarding the uptake, a positive correlation between initial concentration and q_t values was observed. The appliance of RSM made possible to obtain optimal operating conditions for removing virtually 100 % of Hg from waters with high ionic strength, which is a pivotal step in the direction of the application of this remediation biotechnology at large scale.

Ulva lactuca: A bioindicator for anthropogenic contamination and its environmental remediation capacity

Coastal regions are subjected to degradation due to anthropogenic pollution. Effluents loaded with variable concentrations of heavy metal, persistent organic pollutant, as well as nutrients are discharged in coastal areas leading to environmental degradation. In the past years, many scientists have studied, not only the effect of different contaminants on coastal ecosystems but also, they have searched for organisms tolerant to pollutants that can be used as bioindicators or for biomonitoring purposes. Furthermore, many researchers have demonstrated the capacity of different marine organisms to remove heavy metals and persistent organic pollutants, as well as to reduce nutrient concentration, which may lead to eutrophication. In this sense, Ulva lactuca, a green macroalgae commonly found in coastal areas, has been extensively studied for its capacity to accumulate pollutants; as a bioindicator; as well as for its remediation capacity. This paper aims to review the information published regarding the use of Ulva lactuca in environmental applications. The review was focused on those studies that analyse the role of this macroalga as a biomonitor or in bioremediation experiments.