Removal of ammonium, phosphate, and sulfonamide antibiotics using alum sludge and low-grade charcoal pellets

Transforming drinking water treatment residuals into efficient adsorbents: A review of activation and modification methods

The management of drinking water treatment residuals (DWTRs) poses significant environmental and economic challenges for water treatment facilities; however, these residues have considerable potential as effective adsorbents for pollutant removal. The objectives of this review are to evaluate research conducted from 2015 to 2024 on treatment and modification techniques aimed at enhancing DWTRs' efficacy as adsorbents, analyze the influence of preparation methods on DWTRs performance, evaluate DWTRs adsorbents for different pollutants, and discuss the limitations and challenges in DWTRs applications. The review addresses the knowledge gap by detailed analysis of these advanced modification methods, which have not been extensively reviewed before, and their direct impact on the physicochemical properties and adsorption performance of DWTRs. The review explores various methods including thermal treatment, chemical activation, granulation, pelletization, and the development of composite materials. Key findings indicate that thermal treatment significantly increases surface area and porosity, while chemical activation introduces functional groups that enhance adsorption capacity. Composite DWTRs, incorporating metals, organic compounds, or magnetic properties, demonstrate superior performance in adsorbing diverse contaminants such as dyes and heavy metals. Despite these advancements, challenges remain, particularly in reporting the life cycles and costs of the treated and modified DWTRs and the regeneration of spent adsorbents. The review highlights the importance of optimizing preparation techniques to enhance the physicochemical properties and adsorption performance of DWTRs. By synthesizing existing knowledge and identifying key areas for future research, this review aims to advance sustainable practices in water treatment and resource recovery, aligning with global sustainability goals.

Promoting the suitability of graphitic carbon nitride and metal oxide nanoparticles: A review of sulfonamides photocatalytic degradation

The widespread consumption of pharmaceutical drugs and their incomplete breakdown in organisms has led to their extensive presence in aquatic environments. The indiscriminate use of antibiotics, such as sulfonamides, has contributed to the development of drug-resistant bacteria and the persistent pollution of water bodies, posing a threat to human health and the safety of the environment. Thus, it is paramount to explore remediation technologies aimed at decomposing and complete elimination of the toxic contaminants from pharmaceutical wastewater. The review aims to explore the utilization of metal-oxide nanoparticles (MONPs) and graphitic carbon nitrides (g-C3N4) in photocatalytic degradation of sulfonamides from wastewater. Recent advances in oxidation techniques such as photocatalytic degradation are being exploited in the elimination of the sulfonamides from wastewater. MONP and g-C3N4 are commonly evolved nano substances with intrinsic properties. They possessed nano-scale structure, considerable porosity semi-conducting properties, responsible for decomposing wide range of water pollutants. They are widely applied for photocatalytic degradation of organic and inorganic substances which continue to evolve due to the low-cost, efficiency, less toxicity, and more environmentally friendliness of the materials. The review focuses on the current advances in the application of these materials, their efficiencies, degradation mechanisms, and recyclability in the context of sulfonamides photocatalytic degradation.

Adsorption of antibiotics onto low-grade charcoal in the presence of organic matter: Batch and column tests

Antibiotics contaminate diverse ecosystems and threaten human health. In ecosystems including water, sediment, and soil, the amount of antibiotics present is tiny compared to the amount of natural organic matter. However, most studies have ignored the co-presence of natural organic matter in the adsorption of target antibiotics. In this study, we quantitatively evaluated the effect of co-presenting natural organic matter on the adsorption of sulfamethazine (SMZ) through batch and column experiments using low-grade charcoal, an industrial by-product. SMZ was used as a model antibiotic compound and humic acid (HA) was used to represent natural organic matter. The co-presence of 2000 mg/L HA (400 times the concentration of SMZ) lowered the adsorption rate of SMZ from 0.023 g/mg·min to 0.007 g/mg·min, and the maximum adsorption capacity from 39.8 mg/g to 15.6 mg/g. HA blocked the charcoal's pores and covered its surface adsorption sites, which dramatically lowered its capacity to adsorb SMZ. Similar results were obtained in the flow-through column experiments, where the co-presence of natural organic matter shortened the lifetime of the charcoal. As a result, the co-presence of a relatively high concentration of natural organic matter can inhibit the adsorption of SMZ and likely other antibiotic compounds, and thus the presence of natural organic matter should be accounted for in the design of adsorption processes to treat antibiotics in water.

Regulation of ash slagging behavior of palm oil decanter cake by alum sludge addition

Combustion of palm oil decanter cake (PODC) is a propitious alternative waste to energy means. However, the mono-combustion of PODC prompt severe ash slagging behavior which give rise to reduction in heat transfer and also shorten the lifespan of combustion reactors. In this study, alum sludge (AS) was introduced at different proportion of 30%, 50% and 70% to revamp the slagging characteristics of PODC during combustion. The addition of AS improved ash fusion temperature of PODC during co-combustion as ash fusion temperature increased significantly under high AS dosage. Slagging and fouling indices showed that at 50% AS addition, slagging tendency of the co-combustion ashes can be ignored. The predictive model for PODC-AS combustion showed good correlation coefficient with 0.89. Overall, co-combustion of PODC and AS is an ideal ash related problem-solving route. The proposed PODC slagging preventive method by AS was based on: (1) limited amount of aluminum content in PODC-AS system resulted in development of refractory ash (2) reduction in proportion of basic oxide which act as ash bonding glue played important role in the regulation of slagging (3) reduction of cohesive bond by formation of spongy and porous structure which prevented ash slagging.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

Achieving win-win outcomes with cerium-loaded porous aluminum sludge hydrogel microspheres for enhanced phosphate removal

Breaking the technical bottleneck of traditional powdered adsorbent in phosphate adsorption application treatment, a macroscopic high adsorption performance aluminum sludge-based composite hydrogel material was constructed to synergistically solve the problems of water eutrophication and aluminum sludge resourcization. In this study, porous Ce-modified aluminum sludge hydrogel microspheres (Ce-AlS-SA) were prepared to improve the surface chemical structure and microscopic morphology of the macroscopic adsorbent material to enhance the adsorption capacity and achieve effective solid-liquid separation. The best adsorption performance of the material (Ce-AlS₁₂-SA₁) was obtained when the Ce-AlS: SA: Na₂CO₃ was 12:1:1, and obtained the optimal adsorption conditions by Response Surface Method (RSM) with 1.5 mg/L of the dosage, 4 of pH and 50 mg/L of C_phosphate. The maximum adsorption of 20.36 mg P/g was obtained by the Langmuir model at 303 K, which was 2.92 times more than raw sludge. According to the Freundlich and pseudo-second-order kinetic model, the adsorption process is chemisorption; the multi-stage adsorption process is reflected in the intraparticle diffusion and film diffusion models. The main mechanisms combined with the characterization analysis are electrostatic gravity, ligand exchange, and inner-sphere complexation. Meanwhile, Ce-AlS₁₂-SA₁ shows good resistance to interference in the coexistence of multiple ions. Therefore, this material can be recognized as a new material with in-depth, diversified and practical needs for resourceful utilization, which is expected to achieve extensive engineering applications in the future.

Enhanced phosphate adsorption studies on several metal-modified aluminum sludge: preparation optimization, adsorption behavior, and mechanistic insight

To solve the problems such as water eutrophication caused by excess phosphorus, the potential residual value of aluminum sludge was fully exploited and its phosphate adsorption capacity was further improved. In this study, twelve metal-modified aluminum sludge materials were prepared by co-precipitation method. Among them, Ce-WTR, La-WTR, Y-WTR, Zr-WTR, and Zn-WTR showed excellent adsorption capacity for phosphate. The adsorption performance of Ce-WTR on phosphate was twice that of the native sludge. The enhanced adsorption mechanism of metal modification on phosphate was investigated. The characterization results showed that the increase in specific surface area after metal modification was 9.64, 7.5, 7.29, 3, and 1.5 times, respectively. The adsorption of phosphate by WTR and Zn-WTR was in the accordance with Langmuir model, while the others were more following the Freundlich model (R² > 0.991). The effects of dosage, pH, and anion on phosphate adsorption were investigated. The surface hydroxyl groups and metal (hydrogen) oxides played an important role in the adsorption process. The adsorption mechanism involves physical adsorption, electrostatic attraction, ligand exchange, and hydrogen bonding. This study provides new ideas for the resource utilization of aluminum sludge and theoretical support for preparing novel adsorbents for efficient phosphate removal.

Ceramsite made from drinking water treatment residue for water treatment: A critical review in association with typical ceramsite making

The use of ceramsite to construct filtration systems (e.g., biofilters) is a common method for water treatment. To promote such applications, the development of low-cost, high-performance, and environmentally friendly ceramsites has received increasing attention from scientists, and a critical step in the development is the preparation of raw materials. As an inevitable and non-hazardous by-product during potable water production, drinking water treatment residue (DWTR) is typically recycled to make water treatment ceramsite to promote recycling in filtration systems. This study aims to bridge the knowledge gap regarding DWTR in making ceramsites for water treatment. The results suggest that the fabrication methods for DWTR-based ceramsite can be generally classified into sintering and non-sintering procedures. For the sintering method, owing to the heterogeneous properties (especially aluminum, iron, and calcium), DWTR has been applied as various sub-ingredients for raw materials preparations. In contrast, for the non-sintering method, DWTR is commonly applied as the main ingredient, and natural curing, physical crosslinking, and thermal treatment methods have been typically adopted to make ceramsite. However, DWTR-based ceramsites tend to have a high adsorption capability and favorable microbial effects to control different kinds of pollution (e.g., phosphorus, nitrogen, and organic matter). Future work is typically recommended to thoroughly evaluate the performance of DWTR-based ceramsite-constructed filtration systems to control water pollution concerning the making procedures, the potential to control pollution, the stability, and the safety of raw DWTR-based ceramsite, providing systematic information to design more proper planning for beneficial recycling.

Fe3+/Mn2+ (Oxy)Hydroxide Nanoparticles Loaded onto Muscovite/Zeolite Composites (Powder, Pellets and Monoliths): Phosphate Carriers from Urban Wastewater to Soil

The development of an efficient adsorbent is required in tertiary wastewater treatment stages to reduce the phosphate-phosphorous content within regulatory levels (1 mg L^-1 total phosphorous). In this study, a natural muscovite was used for the preparation of muscovite/zeolite composites and the incorporation of Fe³⁺/Mn²⁺ (oxy)hydroxide nanoparticles for the recovery of phosphate from synthetic wastewater. The raw muscovite MC and the obtained muscovite/sodalite composite LMC were used in the powder form for the phosphate adsorption in batch mode. A muscovite/analcime composite was obtained in the pellets PLMCT₃ and monolith SLMCT₂ forms for the evaluation in fixed-bed mode for continuous operation. The effect of pH, equilibrium and kinetic parameters on phosphate adsorption and its further reuse in sorption-desorption cycles were determined. The characterization of the adsorbents determined the Fe³⁺ and Mn²⁺ incorporation into the muscovite/zeolite composite's structure followed the occupancy of the extra-framework octahedral and in the framework tetrahedral sites, precipitation and inner sphere complexation. The adsorbents used in this study (MC, LMC, PLMCT₃ and SLMCT₂) were effective for the phosphate recovery without pH adjustment requirements for real treated wastewater. Physical (e.g., electrostatic attraction) and chemical (complexation reactions) adsorption occurred between the protonated Fe³⁺/Mn²⁺ (oxy)hydroxy groups and phosphate anions. Higher ratios of adsorption capacities were obtained by powder materials (MC and LMC) than the pellets and monoliths forms (PLMCT₃ and SLMCT₂). The equilibrium adsorption of phosphate was reached within 30 min for powder forms (MC and LMC) and 150 min for pellets and monoliths forms (PLMCT₃ and SLMCT₂); because the phosphate adsorption was governed by the diffusion through the internal pores. The adsorbents used in this study can be applied for phosphate recovery from wastewater treatment plants in batch or fixed-bed mode with limited reusability. However, they have the edge of environmentally friendly final disposal being promissory materials for soil amendment applications.

Potential toxic effects of sulfonamides antibiotics: Molecular modeling, multiple-spectroscopy techniques and density functional theory calculations

Sulfonamide antibiotics (SAs) are widely used in medicine, animal husbandry and aquaculture, and excessive intake of SAs may pose potential toxicity to organisms. The toxicological mechanisms of two classical SAs, sulfamerazine (SMR) and sulfamethoxazole (SMT), were investigated by molecular docking, DFT and multi-spectroscopic techniques using HSA and BSA as model proteins. The quenching of HSA/BSA endogenous fluorescence by SMR was higher than that by SMT due to the stronger binding effect of the pyrimidine ring on HSA/BSA compared to the oxazole ring, and that result was consistent with that predicted by DFT calculations. Thermodynamic parameters show that the binding of SAs to HSA/BSA is an exothermic process that proceeds spontaneously (ΔG < 0). Marker competition experiments illustrate that the binding site of SMR/SMT on serum albumin is located in subdomain IIIA. The combination of SAs and HSA/BSA is mainly realized by hydrogen bond and hydrophobic interaction, and the concept is also supported by molecular modeling. The reduced α-helix content of HSA/BSA induced by SMR/SMT indicates a greater stretching of the protein α-helix structure of the SMR/SMT-HSA/BSA. The results could provide useful toxicological information on the hazards of SAs in response to growing concern that SAs may pose a toxic threat to organisms.

Comparison of Cr(VI) adsorption and photocatalytic reduction efficiency using leonardite powder

It is very important to treat Cr(VI) from the aquatic environment due to its toxic and harmful effects. Conventional treatment methodology involving biological pathways is generally ineffective for wastewater containing Cr(VI). Therefore, it is necessary to develop environmentally friendly and economical methods to remove Cr(VI) from the aquatic environment. In this study, leonardite, which is a natural mineral that has no harmful effects on the environment, was used for Cr(VI) removal. Leonardite was used in both adsorption and photocatalytic treatment systems by only pulverizing without any chemical treatment. Characterizations of leonardite were obtained using X-ray fluorescence (XRF), fouirer transform infrared spektrofotometre (FTIR), scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDX) analyses methods. The effects of solution pH (2-10), particle size (45-300 μm), adsorbent dose (0.25-3 g/L), and initial concentration (10-30 mg/L) on Cr(VI) removal efficiency were investigated in both adsorption and photocatalytic experiments. In the adsorption process, a complete removal efficiency (100%) was obtained for 3 g/L of adsorbent dose with an initial Cr(VI) concentration of 10 mg/L at pH 2 for 2 h. In the photocatalytic process, 100% removal efficiency of Cr(VI) was obtained when four times less adsorbent dosage was used under the same conditions. In addition, the reuse of leonardite powder was also investigated under optimum experimental conditions. Leonardite powder preserved approximately 70% of its activity in the photocatalytic process while it lost 50% of its activity after 5 reuses in adsorption process.