Adsorptive removal of Pb(II) ions onto surface modified adsorbents derived from Cassia fistula seeds: Optimization and modelling study

A novel chitosan-glutamic acid membrane for multi-pollutant amputation: Investigational and RSM optimizations

The novel glutamic acid crosslinked chitosan membrane (CsG) was fabricated and tested for its adsorption capabilities for the removal of multiple pollutants like Cr (VI), cyanide, fluoride and diclofenac sodium from wastewater. This fabricated CsG membrane was characterized by various techniques like FT-IR, SEM, EDX and XRD, BET to assess its structural, compositional and morphological properties. The working parameters studied by batch experiments were solution pH, CsG dose, contact time, pollutant concentration and solution temperature. The CsG membrane exhibited maximum adsorption capacity of 410.7 mg/g, 310.2 mg/g, 14.3 mg/g, 132.7 mg/g for Cr (VI), cyanide, fluoride and diclofenac respectively. The validation of the operational parameters was performed by Response Surface Methodology (RSM). The experimental data fitted well with Langmuir isotherm model and followed pseudo second order kinetics for all the four targeted contaminants. The spontaneity of the process was checked by thermodynamics studies. The high partition coefficients of 7669 L/kg Cr(VI), 23,309 L/kg (CN-), 649 L/kg (F-) and 2613 L/kg (DFC) are the indicators of excellent attractive interaction between CsG membrane and target toxicants. The CsG membrane showed efficient regenerative adsorption properties up to 5 adsorption-desorption cycles. Overall, the developed novel CsG membrane promised as an effective material for the removal of multiple number of pollutants from water.

Adsorption of lead ions from wastewater using electrospun zeolite/MWCNT nanofibers: kinetics, thermodynamics and modeling study

Heavy metal contamination in water is a serious environmental issue due to the toxicity of metals like lead. This study developed zeolite and multi-walled carbon nanotube (MWCNT) incorporated polyacrylonitrile (PAN) nanofibers via needleless electrospinning and examined their potential for lead ion adsorption from aqueous solutions. The adsorption process was optimized using response surface methodology (RSM) and artificial neural network (ANN) modeling approaches. The adsorbent displayed efficient lead removal of 84.75% under optimum conditions (adsorbent dose (2.21 g), adsorption time (207 min), temperature (48 °C), and initial concentration (62 ppm)). Kinetic studies revealed that the adsorption followed pseudo-first-order kinetics governed by interparticle diffusion. Isotherm analysis indicated Langmuir monolayer adsorption with improved 5.90 mg g-1 capacity compared to pristine PAN nanofibers. Thermodynamic parameters suggested the adsorption was spontaneous and endothermic. This work demonstrates the promise of electrospun zeolite/MWCNT nanofibers as adsorbents for removing lead from wastewater.

A Comparison of a Conventional Chemical Coagulant and a Natural Coagulant Derived from Cassia fistula Seeds for the Removal of Heavy Metal Ions

Cassia fistula seed-derived coagulant has been reported to exhibit high coagulating-flocculating activity, environmental friendliness, and cost-effectiveness for the wastewater treatment, especially of textile wastewater. For heavy metal removal, however, research focusing on evaluating the feasibility of this material is still limited. Therefore, this study reports jar-test experiments in which the Zn2+ and Ni2+ removal efficiency of C. fistula coagulant was assessed. Moreover, a comparison of coagulation performance using a conventional chemical coagulant and the natural coagulant was performed. Characterization of the C. fistula seed-derived coagulant revealed the presence of important functional groups and fibrous networks with rough surfaces. A bench-scale study indicated that the coagulation performance of the two coagulants depends strongly on the initial concentration of metal ions, pH level, and coagulant dosage. The C. fistula seed-derived coagulant was found to possess higher removal efficiency than polyaluminum chloride. This natural coagulant removed over 80% of metal ions at the optimal conditions of pH 5.0, a metal ion concentration of 25 ppm, and a dosage of 0.8 and 1.6 g/L for Zn2+ and Ni2+, respectively. This study shows that C. fistula seed-derived coagulant is a potential alternative to chemical coagulants and could be developed to provide an environmentally friendly, economical, and efficient wastewater treatment.

Adsorptive removal of acid blue dye 113 using three agricultural waste biomasses: The possibility of valorization by activation and carbonization - A comparative analysis

The presence of various organic and inorganic contaminants in wastewater leads to serious health effects on humans and ecosystems. Industrial effluents have been considered as noticeable sources of contaminating water streams. These effluents directly liberate the pollutants such as dye molecules and heavy metal ions into the environment. In the present study, three biowaste materials (groundnut shell powder, coconut coir powder and activated corn leaf carbon) were utilized and compared for the removal of acid blue dye 113 from aqueous solutions. The characterization study of newly prepared sorbent material (H3PO4-activated corn leaf carbon) and the other utilized sorbents was carried out by Scanning Electron Microscope (SEM) and Fourier Transform Infrared Spectrophotometer (FTIR), along with Energy Dispersive X-Ray (EDX) Analysis. The influence of experimental conditions such as pH, initial dye concentration, temperature, contact time, and sorbent dosage on the removal efficiency of the dye were appraised. The adsorption isotherm and kinetic result of acid blue dye 113 adsorption onto the sorbents best obeyed from Sips and pseudo-second-order kinetic model. Overall, the outcomes confirmed that the newly synthesized sorbent material (carbonized H3PO4-activated corn leaf) has superior adsorption capacity, rapid adsorption, and higher suitability for the removal of toxic dyes from the contaminated waters.

Adsorption of Pb2+ and Cu2+ in wastewater by lignosulfonate adsorbent prepared from corn straw

The heavy metal ions contained in industrial wastewater are a great threat to human health. Exploring a adsorbent which have low-cost, green environmental friendly, high adsorption capacity, good recycle is key to solve heavy metal ions pollution. Lignin sulfonate was obtained by treating corn stover, and then modified lignin sulfonate was obtained by hydrothermal method. The porous structure makes heavy metal ions occupy more internal adsorption sites. Modified lignosulfonate adsorbent efficiency removes heavy metals in wastewater especially Cu2+ and Pb2+. The adsorption capacity of Cu2+ on modified lignosulfonate is 450.3 mg g-1, Pb2+ is 475.4 mg g-1. In addition, for 40 mg L-1 Cu2+ and Pb2+ using 0.4 g L-1, the adsorption equilibrium is only reached within 60 min. Meanwhile, the removal ratio of Pb is 83 %, Cd is 72 %, Cu is 87 %, Zn is 36 %, Mn is 25 %, Cr is 95 %, and Fe is 99 % in wastewater using 0.4 g L-1 adsorbent in 2 h. This research develops a practical adsorbent to remove heavy metals from actual wastewater.

Removal of toxic heavy metals using genetically engineered microbes: Molecular tools, risk assessment and management strategies

The direct release of industrial effluent into the water and other anthropogenic activities causes water pollution. Heavy metal ions are the primary contaminant in the industrial effluents which are exceptionally toxic at low concentrations, terribly disturb the endurance equilibrium of activities in the eco-system and be remarkably hazardous to human health. Different conventional treatment methodologies were utilized for the removal of toxic pollutants from the contaminated water which has several drawbacks such as cost-ineffective and lower efficiency. Recently, genetically modified micro-organisms (GMMs) stand-out for the removal of toxic heavy metals are viewed as an economically plausible and environmentally safe technique. GMMs are microorganisms whose genetic material has been changed utilizing genetic engineering techniques that exhibit enhanced removal efficiency in comparison with the other treatment methodologies. The present review comments the GMMs such as bacteria, algae and fungi and their potential for the removal of toxic heavy metals. This review provides current aspects of different advanced molecular tools which have been used to manipulate micro-organisms through genetic expression for the breakdown of metal compounds in polluted areas. The strategies, major limitations and challenges for genetic engineering of micro-organisms have been reviewed. The current review investigates the approaches working on utilizing genetically modified micro-organisms and effective removal techniques.

Modified Polymeric Biosorbents from Rumex acetosella for the Removal of Heavy Metals in Wastewater

The contamination of water resources by effluents from various industries often contains heavy metals, which cause irreversible damage to the environment and health. The objective was to evaluate different biosorbents from the weed Rumex acetosella to remove metal cations in wastewater. Drying, grinding and sieving of the stems was carried out to obtain the biomass, retaining the fractions of 250 to 500 µm and 500 to 750 µm, which served to obtain the biosorbents in natura (unmodified), acidic, alkaline, and mixed. Proximal analysis, PZC, TOC, removal capacity, influence of pH, functional groups, thermal analysis, structural characteristics, adsorption isotherms, and kinetic study were evaluated. The 250 µm mixed treatment was the one that presented the highest removal percentages, mainly due to the OH, NH, -C-H, COOH, and C-O functional groups achieving the removal of up to 96.14% of lead, 36.30% of zinc, 34.10% of cadmium and 32.50% of arsenic. For contact times of 120 min and an optimum pH of 5.0, a loss of cellulose mass of 59% at 328 °C and a change in the surface of the material were also observed, which allowed for obtaining a topography with greater chelating capacity, and the Langmuir and pseudo-second order models were better fitted to the adsorption data. The new biosorbents could be used in wastewater treatment economically and efficiently.

A comprehensive review on sources, analysis and toxicity of environmental pollutants and its removal methods from water environment

Natural and human anthropogenic activities increase the concentration of the toxic pollutant in the water environment; they could cause harmful effects even in their lower concentration. In humans, toxic pollutants damage the structural and functional properties of essential organs including the heart, liver, kidneys, reproductive systems and pancreas. To avoid the toxicity of the pollutant, they should be removed from the water environment. Since various conventional water/wastewater treatment technologies including precipitation, ion exchange, flocculation, filtration, electrodialysis and membrane separation are employed to reduce the concentration of the pollutant, they have various difficulties in implementation, efficiency and ecological perspective. Therefore, several researchers are now focusing on alternative and eco-friendly approach called biosorption to remove toxic contaminants from the water environment. The biosorption innovation is one of the acclaimed systems for water treatment. The noteworthy endeavours have been made throughout the years to grow profoundly particular and effective biosorbent materials that are more effective, abundantly available, and cost-effective. Biosorption is effectively executed by utilizing both living and dead biomasses of bacteria, fungi and algae. Moreover, agro-waste materials are also utilized as biosorbents due to their excellent surface properties, abundant availability and cost-effectiveness. A variety of physical and chemical treatments enhances the biosorption capabilities of biosorbents via modifying their surface properties. In this review, biosorption mechanism, influencing parameters and application of biosorbent materials towards the removal of toxic pollutants are discussed. The future research opportunities for sustainable wastewater treatment were also explained.

Facile route for synthesis of Fe0/Fe3C/γ-Fe2O3 carbon composite using hydrothermal carbonization of sugarcane bagasse and its use as effective adsorbent for sulfamethoxazole removal

Non-toxic mesoporous magnetic carbon composite was synthesised from hydrothermal carbonization of sugarcane bagasse with Iron (III) nitrate nonahydrate in two steps along with thermo-chemical oxidation process using sodium hydroxide. IR spectrum exposed the presence of oxygenated functional groups and FeO whereas XRD analysis revealed the availability of Fe⁰/Fe₃C/γ-Fe₂O₃ at varying intensities. SEM analysis showed the spherical shaped carbon is well encapsulated with iron particles. Textural studies showed that after thermo-chemical activation intensified the surface area on composites to about 491.474 m² g^-1 thereby, promoting improved porosity on the carbon matrix. The fabricated composite showed magnetization of 32.84 emu g^-1 and SMX adsorption capacity as 169.49 mg g^-1. Kinetics and isotherm studies revealed that removal of SMX fitted well in Pseudo-second order and Langmuir models. The mode of interaction of SMX on magnetic carbon composites with respect to different pH was studied showing that π-π electron donor interaction (EDA), hydrophobic interaction, charge assisted hydrogen bond formation were responsible for SMX removal. The selectivity nature of magnetic composite with respect to SMX was studied in the presence of multiple pollutant. Use of magnetic carbon helps in industrialising the material to high level due to their unique property in separation and recycling. Application of hydrothermal carbonization is found to be applicable for wet solid substance thereby evolving structural carbon compound.

Efficient Removal of Pb(II) from Aqueous Medium Using Chemically Modified Silica Monolith

The adsorptive removal of lead (II) from aqueous medium was carried out by chemically modified silica monolith particles. Porous silica monolith particles were prepared by the sol-gel method and their surface modification was carried out using trimethoxy silyl propyl urea (TSPU) to prepare inorganic–organic hybrid adsorbent. The resultant adsorbent was evaluated for the removal of lead (Pb) from aqueous medium. The effect of pH, adsorbent dose, metal ion concentration and adsorption time was determined. It was found that the optimum conditions for adsorption of lead (Pb) were pH 5, adsorbent dose of 0.4 g/L, Pb(II) ions concentration of 500 mg/L and adsorption time of 1 h. The adsorbent chemically modified SM was characterized by scanning electron microscopy (SEM), BET/BJH and thermo gravimetric analysis (TGA). The percent adsorption of Pb(II) onto chemically modified silica monolith particles was 98%. An isotherm study showed that the adsorption data of Pb(II) onto chemically modified SM was fully fitted with the Freundlich and Langmuir isotherm models. It was found from kinetic study that the adsorption of Pb(II) followed a pseudo second-order model. Moreover, thermodynamic study suggests that the adsorption of Pb(II) is spontaneous and exothermic. The adsorption capacity of chemically modified SM for Pb(II) ions was 792 mg/g which is quite high as compared to the traditional adsorbents. The adsorbent chemically modified SM was regenerated, used again three times for the adsorption of Pb(II) ions and it was found that the adsorption capacity of the regenerated adsorbent was only dropped by 7%. Due to high adsorption capacity chemically modified silica monolith particles could be used as an effective adsorbent for the removal of heavy metals from wastewater.