Recent advances in PCB removal from historically contaminated environmental matrices

Beyond the Drinking Water Directive: The use of reporter gene assays as an added tool for effect-based monitoring of polycyclic aromatic hydrocarbons and polychlorinated biphenyls in drinking water sources

Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) are legacy organic micropollutants (OMPs) that are sporadically detected in drinking water (DW) sources. The European Drinking Water Directive requires EU member states to monitor 5 PAHs in DW and its sources. The Dutch national regulations require 6 additional PAHs to be monitored and 7 polychlorinated biphenyls (PCBs). These indicator compounds act as representatives for large compound classes. PCBs alone comprise 209 congeners, it is evident that conventional chemical target analysis (GC-tQ-MS) alone is not sufficient to monitor these entire compound classes. This study investigated the application of reporter gene assays as effect-based methods (EBMs) to monitor PAHs and PCBs in DW sources. Herein, it was assessed what added value the bioassays can bring compared to the current approach of chemical target analysis for PCBs and PAHs. Regulated and non-regulated PAHs and PCBs were tested in four bioassays to determine the relative potency factors (RPFs) for these compounds. Non-regulated congeners were found to be active in the PAH-CALUX and anti-AR CALUX. An assessment of surface water (SW) spiked with standard mixtures containing PAHs and PCBs confirmed the predictable behavior of the PAH-CALUX. Moreover, the bioassay was able to detect AhR-mediated activity caused by non-regulated PAHs and PCBs, whereas this would have been missed by conventional chemical target analysis. Last, a field study was conducted in Dutch DW sources at six sampling moments. The PAH-CALUX detected AhR-mediated activity at all sampling moments and an ecological effect-based trigger (EBT) value was exceeded on multiple accounts. Combined application of GC-tQ-MS and the PAH-CALUX ensures compliancy with monitoring legislation and provides additional insights into potential hazards to humans and the environment.

Ecosystem risk-based prioritization of micropollutants in wastewater treatment plant effluents across China

Identifying priority pollutants in wastewater treatment plant (WWTP) effluents is crucial for optimizing monitoring efforts, improving regulations, and developing targeted mitigation strategies. Despite the presence of numerous trace organic pollutants in WWTP effluents, a comprehensive prioritization scheme is lacking, hindering effective control. This study screened 216 micropollutants, including pharmaceuticals, pesticides, and industrial chemicals, which had been detected in effluents from 46 WWTPs across China. A multi-criteria prioritization method was developed, considering exposure potential based on median concentrations and detection frequencies, as well as hazard potential determined by persistence, bioaccumulation, in vitro toxicity, and in vivo toxicity. Pollutants with low exposure or hazard potential were filtered out, and a priority index was calculated to rank the remaining 59 substances. The top 15 priority pollutants included regulated persistent organic pollutants like perfluorooctanoic acid and their alternatives such as perfluorobutane sulfonate, pesticide transformation products, and emerging contaminants such as bisphenol A, which are not currently regulated in WWTP effluents. This study provides a systematic approach to identify priority pollutants and generates a guiding framework for monitoring, regulation, and control of both well-recognized and overlooked contaminants in WWTP effluents.

Insights into the biodegradation of pentachlorobiphenyl by Microbacterium paraoxydans: proteomic and metabolomic studies

Bacterial degradation mechanism for high chlorinated pentachlorobiphenyl (PentaCB) with worse biodegradability has not been fully elucidated, which could limit the full remediation of environments afflicted by the complex pollution of polychlorinated biphenyls (PCBs). In this research, a new PentaCB-degrading bacterium Microbacterium paraoxydans that has not been reported was obtained using enzymatic screening method. The characteristics of its intracellular enzymes, proteome and metabolome variation during PentaCB degradation were investigated systematically compared to non-PentaCB conditions. The findings indicate that the degradation rate of PentaCB (1 mg/L) could reach 23.9% within 4 hours and achieve complete degradation within 12 hours, with the mixture of intracellular enzymes being most effective at a pH of 6.0. During the biodegradation of PentaCB, the 12 up-regulated proteins characterized included ABC transporter PentaCB-binding protein, translocase protein TatA, and signal peptidase I (SPase I), indicating the presence of functional proteins for PentaCB degradation in both the cytoplasm and the outer surface of the cytoplasmic membrane. Furthermore, five differentially enriched metabolites were strongly associated with the aforementioned proteins, especially the up-regulated 1, 2, 4-benzenetriol which feeds into multiple degradation pathways of benzoate, chlorocyclohexane, chlorobenzene and aminobenzoate. These relevant results help to understand and speculate the complex mechanisms regarding PentaCB degradation by M. paraoxydans, which have both theoretical and practical implications for PCB bioremediation.

Site-specific response of sediment microbial community to supplementation of polyhydroxyalkanoates as biostimulants for PCB reductive dechlorination

The use of biodegradable plastics is constantly raising, increasing the likeliness for these polymers to end up in the environment. Environmental applications foreseeing the intentional release of biodegradable plastics have been also recently proposed, e.g., for polyhydroxyalkanoates (PHAs) acting as slow hydrogen releasing compounds to stimulate microbial reductive dehalogenation processes. However, the effects of their release into the environment on the ecosystems still need to be thoroughly explored. In this work, the use of PHAs to enhance the microbial reductive dechlorination of polychlorobiphenyls (PCBs) and their impact on the metabolic and compositional features of the resident microbial community have been investigated in laboratory microcosms of a polluted marine sediment from Mar Piccolo (Taranto, Italy), and compared with recent findings on a different contaminated marine sediment from Pialassa della Baiona (Ravenna, Italy). A decreased biostimulation efficiency of PHAs on PCBs reductive dechlorination was observed in the sediment from Mar Piccolo, with respect to the sediment from Pialassa della Baiona, suggesting that the sediments' physical-chemical characteristics and/or the biodiversity and composition of its microbial community might play a key role in determining the outcome of this biostimulation strategy. Regardless of the sediment origin, PHAs were found to have a specific and pervasive effect on the sediment microbial community, reducing its biodiversity, defining a newly arranged microbial core of primary degraders and consequently affecting, in a site-specific way, the abundance of subdominant bacteria, possibly cross-feeders. Such potential to dramatically change the structure of autochthonous microbial communities should be carefully considered, since it might have secondary effects, e.g., on the natural biogeochemical cycles.

Unlocking the potential of resuscitation-promoting factor for enhancing anaerobic microbial dechlorination of polychlorinated biphenyls

Microbial dechlorination of polychlorinated biphenyls (PCBs) is limited by the slow growth rate and low activity of dechlorinators. Resuscitation promoting factor (Rpf) of Micrococcus luteus, has been demonstrated to accelerate the enrichment of highly active PCB-dechlorinating cultures. However, it remains unclear whether the addition of Rpf can further improve the dechlorination performance of anaerobic dechlorination cultures. In this study, the effect of Rpf on the performance of TG4, an enriched PCB-dechlorinating culture obtained by Rpf amendment, for reductive dechlorination of four typical PCB congeners (PCBs 101, 118, 138, 180) was evaluated. The results indicated that Rpf significantly enhanced the dechlorination of the four PCB congeners, with residual mole percentages of PCBs 101, 118, 138 and 180 in Rpf-amended cultures being 16.2-29.31 %, 13.3-20.1 %, 11.9-14.4 % and 9.4-17.3 % lower than those in the corresponding cultures without Rpf amendment after 18 days of incubation. Different models were identified as appropriate for elucidating the dechlorination kinetics of distinct PCB congeners, and it was observed that the dechlorination rate constant is significantly influenced by the PCB concentration. The supplementing Rpf did not obviously change dechlorination metabolites, and the removal of chlorines occurred mainly at para- and meta- positions. Analysis of microbial community and functional gene abundance suggested that Rpf-amended cultures exhibited a significant enrichment of Dehalococcoides, Dehalogenimonas and Desulfitobacterium, as well as non-dechlorinators belonging to Desulfobacterota and Bacteroidetes. These findings highlight the potential of Rpf as an effective additive for enhancing PCB dechlorination, providing new insights into the survival of functional microorganisms involved in anaerobic reductive dechlorination.

Recent advances in sulfidized nanoscale zero-valent iron materials for environmental remediation and challenges

Over the past decade, sulfidized nanoscale zero-valent iron (S-nZVI) has been developed as a promising tool for the remediation of contaminated soil, sediment, and water. Although most studies have focused on applying S-nZVI for clean-up purposes, there is still a lack of systematic summary and discussion from its synthesis, application, to toxicity assessment. This review firstly summarized and compared the properties of S-nZVI synthesized from one-step and two-step synthesis methods, and the modification protocols for obtaining better stability and reactivity. In the context of environmental remediation, this review outlined an update on the latest development of S-nZVI for removal of heavy metals, organic pollutants, antibiotic resistance genes (ARGs), and antibiotic resistant bacteria (ARB) and also discussed the underlying removal mechanisms. Environmental factors affecting the remediation performance of S-nZVI (e.g., humic acid, coexisting ions, S/Fe molar ratio, pH, and oxygen condition) were highlighted. Besides, the application potential of S-nZVI in advanced oxidation processes (AOP), especially in activating persulfate, was also evaluated. The toxicity impacts of S-nZVI on the environmental microorganism were described. Finally, the future challenges and remaining restrains to be resolved for better applicability of S-nZVI are also proposed. This review could provide guidance for the environmental remediation with S-nZVI-based technology from theoretical basis and practical perspectives.

Ant nest-like hierarchical porous imprinted resin-dispersive solid-phase extraction for selective extraction and determination of polychlorinated biphenyls in milk

Polychlorinated biphenyls (PCBs) are persistent toxic, organic chemicals that tend to accumulate in the food chain. This study reports the rapid and selective extraction and determination of PCBs (PCB81, 153, 105, 126, and 157) in milk samples by a dispersive solid-phase extraction (DSPE) coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS). An ionic liquid-molecularly imprinted porous resin (IL-MIPPR) as a DSPE adsorbent was synthesized from m-aminophenol, formaldehyde, and 2,2'-benzidinedisulfonic acid as the monomer, crosslinker, and virtual template, respectively. The IL-MIPPR had a fast mass transfer (1.0 min) and good selectivity (imprinting factors of 1.8-3.0). The IL-MIPPR - DSPE - GC-MS/MS method exhibited good linearity (R² ≥ 0.9995), the limit of detections (LODs) < 0.6 pg/g, and the recoveries ranged from 82.8 % to 106 % with relative standard deviations ≤ 6.6 %. This method is thus better than previously reported methods in terms of the LOD, the adsorbent dosage, and the extraction time.

A novel strategy for enhancing bioremediation of polychlorinated biphenyl-contaminated soil with resuscitation promoting factor and resuscitated strain

PCBs bioremediation is largely impeded by the reduced metabolic activity and degradation ability of indigenous and exogenous microorganisms. Resuscitation promoting factor (Rpf) of Micrococcus luteus, has been reported to resuscitate and stimulate the growth of PCB-degrading bacterial populations, and the resuscitated strains exhibited excellent PCB-degrading performances. Therefore, this study was conducted to assess the feasibility of supplementing Rpf (SR) or resuscitated strain LS1 (SL), or both (SRL) for enhanced bioremediation of PCB-contaminated soil. The results indicated that Rpf and/or LS1 amended soil microcosms achieved more rapid PCBs degradation, which were 1.1-3.2 times faster than control microcosms. Although soil-inoculated LS1 maintained the PCB-degrading activity, higher PCBs degradation was observed in Rpf-amended soil microcosms compared with SL. The order of enhancement effect on PCBs bioremediation was SRL > SR > SL. PCBs degradation in soil microcosms was via HOPDA-benzoate-catechol/protocatechuate pathways. The improved PCBs degradation in Rpf-amended soil microcosms was attributed to the enhanced abundances of PCB-degrading populations which were mainly belonged to Proteobacteria and Actinobacteria. These results suggest that Rpf and resuscitated strains serve as effective additive and bio-inoculant for enhanced bioremediation, providing new approaches to realizing large scale applications of in situ bioremediation.

Effect of polyhydroxyalkanoates on the microbial reductive dechlorination of polychlorinated biphenyls and competing anaerobic respirations in a marine microbial culture

The effect of polyhydroxyalkanoates (PHAs) with different composition on the reductive dechlorination activity of a polychlorinated biphenyls (PCBs) dechlorinating marine microbial community and on the activity of sulfate-reducing (SRB) and methanogenic bacteria (MB), were investigated in marine sediment microcosms and compared with the main monomer, 3-hydroxybutyric acid (3HB). Despite PHAs were fermented more slowly than 3HB, all electron donors stimulated constantly sulfate-reduction, methanogenesis and, only transiently, PCB reductive dechlorination. No relevant differences were observed with different compositions of PHAs. According to electron balances, the majority of the supplied electrons (50 %) were consumed by SRB and to less extent by MB (9-31 %), while a small percentage (0.01 %) was delivered to OHRB. In the studied conditions PHAs were confirmed as potential slow‑hydrogen releasing compounds in marine environment but their fermentation rate was sufficiently high to mainly stimulate the competitors of organohalide respring bacteria for electron donors.

Occurrence and Distribution of Persistent Organic Pollutants (POPs) from Sele River, Southern Italy: Analysis of Polychlorinated Biphenyls and Organochlorine Pesticides in a Water-Sediment System

The concentrations, possible sources, and ecological risk of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were studied by analyzing water column (DP), suspended particulate matter (SPM) and sediment samples from 10 sites on the Sele River. Total PCBs concentration ranged from 2.94 to 54.4 ng/L and 5.01 to 79.3 ng/g in the seawater and sediment samples, with OCPs concentration in the range of 0.51 to 8.76 ng/L and 0.50 to 10.2 ng/g, respectively. Pollutants loads in the seaside were measured in approximately 89.7 kg/year (73.2 kg/year of PCBs and 16.5 kg/year of OCPs), indicating that the watercourse could be an important cause of contamination to the Tyrrhenian Sea. Statistical analysis indicates that all polychlorinated biphenyls analytes are more probable to derive from surface runoff than an atmospheric deposition. The results explain that higher concentrations of these pollutants were built in sediment samples rather than in the other two phases, which are evidence of historical loads of PCBs and OCPs contaminants. The Sediment Quality Guidelines (SQGs), the Ecological Risk Index (ERI) and the Risk Quotient (RQ) show that the Sele river and its estuary would reputedly be a zone possibly at risk.

Occurrence, source, and ecological risk assessment of organochlorine pesticides and polychlorinated biphenyls in the water-sediment system of Hangzhou Bay and East China Sea

The pollution characteristics, potential sources, and potential ecological risk of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) were investigated in the Hangzhou Bay (HZB) and East China Sea (ECS). Total OCPs concentration ranged from 2.62 to 102.07 ng/L and 4.41 to 75.79 μg/kg in the seawater and sediment samples, with PCBs concentration in the range of 0.40-51.75 ng/L and 0.80-45.54 μg/kg, respectively. The OCPs were positively correlated with nutrients, whereas PCBs presented a negative correlation. The newly imported dichlorodiphenyltrichloroethane (DDT) in HZB is mainly the mixing of technical DDT and dicofol sources. The PCB source composition is more likely related to the mixture of Kanechlor 300, 400, Aroclor 1016, 1242, and Aroclor 1248. Risk assessment results indicate that OCPs posed low risk in seawater. The potential risk of DDTs in the sediments is a cause of concern.

Photocatalytic Degradation of Dielectric Mineral Oil with PCBs Content Coupled with Algae Treatment

Insulating oil contaminated with polychlorinated biphenyls (PCBs) is an environmentally important pollutant. This research focused on the establishment of the optimum conditions under which photocatalytic oxidation can be used together with biotreatment using the Nostoc sp. microorganism to degrade PCBs present in used dielectric oils. Among the optimal conditions studied were PCB concentration, initial pH, and titanium dioxide (TiO₂) concentration for the photocatalytic step, and PCB concentration and photoperiod for the biotreatment step. The results indicate that the optimal conditions necessary for photocatalytic degradation were a pH of 6.10, 113 mg/L TiO₂, and 765 mg/L PCBs, achieving close to 90% removal. For the biotreatment step, the results showed that PCBs progressively inhibited the microbiological growth, with the lowest cellular growth observed in the medium with the highest PCB concentration.

Remediation of soil polluted with petroleum hydrocarbons and its reuse for agriculture: Recent progress, challenges, and perspectives

Petroleum hydrocarbons (PHs) are used as raw materials in many industries and primary energy sources. However, excessive PHs act as soil pollutants, posing serious threats to living organisms. Various ex-situ or in-situ chemical and biological methods are applied to restore polluted soil. However, most of the chemical treatment methods are expensive, environmentally unfriendly, and sometimes inefficient. That attracts scientists and researchers to develop and select new strategists to remediate polluted soil through risk-based analysis and eco-friendly manner. This review discusses the sources of PHs, properties, distribution, transport, and fate in the environment, internal and external factors affecting the soil remediation and restoration process, and its effective re-utilization for agriculture. Bioremediation is an eco-friendly method for degrading PHs, specifically by using microorganisms. Next-generation sequencing (NGS) technologies are being used to monitor contaminated sites. Currently, these new technologies have caused a paradigm shift by giving new insights into the microbially mediated biodegradation processes by targeting rRNA are discussed concisely. The recent development of risk-based management for soil contamination and its challenges and future perspectives are also discussed. Furthermore, nanotechnology seems very promising for effective soil remediation, but its success depends on its cost-effectiveness. This review paper suggests using bio-electrochemical systems that utilize electro-chemically active microorganisms to remediate and restore polluted soil with PHs that would be eco-friendlier and help tailor-made effective and sustainable remediation technologies.

Removal of Bromine from the non-metallic fraction in printed circuit board via its Co-pyrolysis with alumina

The effectiveness of a recycling approach of the printed circuit board (PCBs), and, thus, the quality of polymeric constituents, primarily rests on the capacity to eliminate the bromine content (mainly as HBr). HBr is emitted in appreciable quantities during thermal decomposition of PCB-contained brominated flame retardants (BFRs). The highly corrosive, yet relatively reactive HBr, renders recovery of bromine-free hydrocarbons streams from brominated polymers in PCBs very challenging. Via combined experimental and theoretical frameworks, this study explores the potential of deploying alumina (Al₂O₃) as a debromination agent of Br-containing hydrocarbon fractions in PCBs. A consensus from a wide array of characterization techniques utilized herein (ICP-OES, IC, XRD, FTIR, SEM-EDX, and TGA) clearly demonstrates the transformation of alumina upon its co-pyrolysis with the non-metallic fractions of PCBs, into aluminum bromides and oxy-bromides. ICP-OES measurements disclose the presence of high concentration of Cu in the non-metallic fraction of PCB, along with minor levels of selected valuable metals. Likewise, elemental ionic analysis by IC demonstrates an elevated concentration of bromine in washed alumina-PCBs pyrolysates, especially at 500 °C. The Coats-Redfern model facilitates the derivation of thermo-kinetic parameters underpinning the thermal degradation of alumina-PCB mixtures. Density functional theory calculations (DFT) establish an accessible reaction pathway for the HBr uptake by the alumina surface, thus elucidating chemical reactions governing the observed alumina debromination activity. Findings from this study illustrate the capacity of alumina as a HBr fixation agent during the thermal treatment of e-waste.