Facile preparation of a novel modified biochar-based supramolecular self-assembled g-C3N4 for enhanced visible light photocatalytic degradation of phenanthrene

A sustainable method for oxidizing phenanthrene in tropical soil using natural iron as a catalyst in a slurry phase reactor with persulfate assistance

The presence of impurities is a significant restriction to the use of natural iron minerals as catalysts in the advanced oxidation process (AOP), especially if applied for soil remediation. This study evaluated the catalytic activity of tropical soil, which has relatively low impurities and naturally contains iron, for the remediation of phenanthrene (PHE) contamination. The system showed good performance, and the best result was 81% PHE removal after 24 h under experimental conditions of pH 7, [PHE]0 = 300 mg/50 g soil, temperature 55 °C, air flow = 260 mL min-1, and [persulfate]0 = 20 mg kg-1, while the mineralization was 61%. Nevertheless, certain limitations were noted in the soil matrix following the remediation procedure, including the appearance of cracks in the soil aggregate, reduction in the crystal size of the soil particles, and decline in the iron and aluminium contents. The results confirmed that the radicals play a major role in the remediation process. SO4˙- was more dominant than O2˙-, while HO˙ played a minor role. Additionally, the by-products were detected by gas chromatography-mass spectroscopy (GC-MS), and the degradation pathway of PHE is proposed. Toxicity assessment tests were performed by using a computational method. In spite of the challenges, this research achieved notable progress in soil remediation, taking a significant step forward in implementing the AOP without catalysts to activate oxidants and remove PHE within the soil. Also, this approach supports sustainability by reducing the need for extra materials and providing an environmentally friendly way of soil remediation.

Metronidazole degradation mechanism by sono-photo-Fenton processes using a spinel ferrite cobalt on activated carbon catalyst

A heterogeneous catalyst was prepared by anchoring spinel cobalt ferrite nanoparticles on porous activated carbon (SCF@AC). The catalyst was tested to activate hydrogen peroxide (HP) in the Fenton degradation of metronidazole (MTZ). SCF nanoparticles were produced through the co-precipitation of iron and cobalt metal salts in an alkaline condition. Elemental mapping, physico-chemical, morphological, structural, and magnetic properties of the as-fabricated catalyst were analyzed utilizing EDX mapping, FESEM-EDS, TEM, BET, XRD, and VSM techniques. The porous structure of AC enhanced the catalytic activity of SCF by a significant decrease in the agglomeration of SCF nanoparticles. The effectiveness of SCF@AC in Fenton degradation improved substantially when UV light and ultrasound (US) irradiations were induced, most likely due to the strong synergistic effect between the catalyst and these irradiation sources. The photo-Fenton system was more efficient than the Fenton, sono-, and sono-photo-Fenton processes eliminating both MTZ and TOC. It was found that AC not only dispersed SCF nanoparticles and improved the stability of the catalyst, but also provided a high adsorption capacity of MTZ, resulting in a faster degradation. After 60 min of the photo-Fenton reaction, the elimination efficiencies of MTZ (30 mg L-1) and TOC were 97 and 42.1% under optimum operational conditions (pH = 3.0, HP = 4.0 mM, SCF@AC = 0.3 g L-1, and UV = 6 W). SCF@AC showed excellent stability with low leaching of metal ions during the reaction. Radical and non-radical (O2•-, HO•, and 1O2 species), alongside adsorption and photocatalysis mechanisms, were responsible for MTZ decontamination over the SCF@AC/HP/UV system. A comprehensive study on the HP activation mechanism and MTZ degradation pathway was obtained through scavenging tests. The findings demonstrate that SCF@AC is an effective, reusable, and environmentally sustainable catalyst for advanced oxidation processes that can effectively remove organic pollutants from wastewater. This study offers valuable insights into the feasibility of employing SCF@AC catalysts in Fenton-based processes for the degradation of MTZ.

Design strategies and mechanisms of g-C3N4-based photoanodes for photoelectrocatalytic degradation of organic pollutants in water

Emerging photoelectrocatalytic (PEC) systems integrate the advantages of photocatalysis and electrocatalysis and are considered as a promising technology for solving the global organic pollution problem in water environments. Among the photoelectrocatalytic materials applied for organic pollutant degradation, graphitic carbon nitride (CN) has the combined advantages of environmental compatibility, stability, low cost, and visible light response. However, pristine CN has disadvantages such as low specific surface area, low electrical conductivity, and high charge complexation rate, and how to improve the degradation efficiency of PEC reaction and the mineralization rate of organic matter is the main problem faced in this field. Therefore, this paper reviews the progress of various functionalized CN used for PEC reaction in recent years, and the degradation efficiency of these CN-based materials is critically evaluated. First, the basic principles of PEC degradation of organic pollutants are outlined. Then, engineering strategies to enhance the PEC activity of CN (including morphology control, elemental doping, and heterojunction construction) are focused on, and the structure-activity relationships between these engineering strategies and PEC activity are discussed. In addition, the important role of influencing factors on the PEC system is summarized in terms of mechanism, to provide guidance for the subsequent research. Finally, suggestions and perspectives are provided for the preparation of efficient and stable CN-based photoelectrocatalysts for practical wastewater treatment applications.

A novel BC/g-C3N4 porous hydrogel carrier used in intimately coupled photocatalysis and biodegradation system for efficient removal of tetracycline hydrochloride in water

Intimately coupled photocatalysis and biodegradation (ICPB) is a promising technology to remove refractory contaminants from water. The key to successful ICPB is a carrier capable of accumulating biofilm and adhering photocatalyst firmly. Herein, BC/g-C₃N₄ was prepared into a three dimensional porous hydrogel and used as a carrier in ICPB system for the first time. Degradation experiments revealed that the removal rate of tetracycline hydrochloride (TCH) in water by the ICPB system was 96.0% after 10 h, which was significantly higher than that by the photocatalysis (PC, 76.3%), biodegradation (B, 32.5%), adsorption (AD, 17.2%), and photolysis (P, 5.0%) systems. Photo-electrochemical tests confirmed that ICPB system had superior electron transfer ability between photocatalysts and microorganisms. The removal efficiency of COD proved that microorganisms played an important role in the mineralization process of TCH by the ICPB system. After the ICPB degradation experiment, microorganisms maintained high activity and Pseudomonas, Burkholderiaceae and Flavobacterium which had TCH degradation or electron transport ability, were enriched. In conclusion, the novel ICPB carrier overcame shortcomings of the traditional ICPB carrier and the novel ICPB system had superior degradation performance for TCH. This study provided a possible method to promote the practical application of ICPB technology.

Advanced oxidation processes for the removal of mono and polycyclic aromatic hydrocarbons - A review

Aromatic hydrocarbons (AHs) are toxic environmental contaminants presented in most of the environmental matrices. Advanced oxidation processes (AOPs) for the removal of AHs in the account of complete mineralization from various environmental matrices have been reviewed in this paper. An in-depth discussion on various AOPs for mono (BTEX) and polyaromatic hydrocarbons (PAHs) and their derivatives is presented. Most of the AOPs were effective in the removal of AHs from the aquatic environment. A comparative study on the degradation of various AHs revealed that the oxidation of the AHs is strongly dependent on the number of aromatic rings and the functional groups attached to the ring. The formation of halogenated and nitrated derivatives of AHs in the real contaminated water containing chloride, nitrite, and nitrate ions seems to be a challenge in using the AOPs in real systems. The phenolic compounds, quinone, alcohols, and aliphatic acids are the important byproducts formed during the oxidation of AHs, initiated by the attack of reactive oxygen species (ROS) on their electron-rich center. In conclusion, AOPs are the adaptable method for the removal of AHs from different environmental matrices. The persulfate-based AOPs were applied in the soil phase removal as an in situ chemical oxidation of AHs. Moreover, the combination of AOPs will be a conclusive solution to avoid or minimize unexpected or other toxic intermediate products and to obtain rapid oxidation of AHs.

Anchoring ZnO on spinel cobalt ferrite for highly synergic sono-photo-catalytic, surfactant-assisted PAH degradation from soil washing solutions

In this study, the photocatalytic activity of ZnO was effectively improved via its combination with spinel cobalt ferrite (SCF) nanoparticles. The catalytic performance of ZnO@SCF (ZSCF) was investigated in coupling with UV irradiation and ultrasound (US), as a heterogeneous sono-photocatalytic process, for the decontamination of phenanthrene (PHE) from contaminated soil. Soil washing tests were conducted in a batch environment, after extraction assisted by using Tween 80. Several characterization techniques such as XRD, FESEM-EDS, BET, TEM, UV-vis DRS, PL and VSM were utilized to determine the features of the as-prepared catalysts. ZSCF showed an excellent catalytic activity toward degradation of PHE in the presence of US and UV with a significant synergic effect. It was found that more than 93% of PHE (35 mg/L) and 87.5% of TOC could be eliminated by the integrated ZSCF/US/UV system under optimum operational conditions (pH: 8.0, ZSCF: 1.5 g/L, UV power: 6.0 W and US power: 70 W) within 90 min of reaction. After five times of use, ZSCF illustrated good reusability in the decontamination of PHE (87%) and TOC (79%). Quenching tests revealed the contribution of h⁺, HO^• and e^- species during PHE degradation over ZSCF/UV/US and an S-scheme photocatalytic mechanisms was proposed for the possible charge transfer routes under the ZSCF system. This study provides the important role of SCF in enhancing the ZnO photocatalytic activity due to its high performance, easy recovery and excellent durability, which it make an efficient and promising catalyst in environmental clean-up applications.

A critical review on biochar-based catalysts for the abatement of toxic pollutants from water via advanced oxidation processes (AOPs)

Proper waste disposal is a key towards sustainable development. Wastewater treatment is delineated by the application of efficient, economic and novel catalysts. Biochar is derived from the thermochemical conversion of biomass or any carbonaceous materials and is considered as one of the most eco-friendly substitute for activated carbon. Owing to its large surface area, porosity, crystallinity and active functional groups, the biochar-based catalysts has been extensively applied for the abatement of toxic pollutants from wastewater streams. While most of the reviews focus on the adsorptive properties of the biochar, this review critically analyses the recent development of biochar-based catalysts in the field of advanced oxidation processes (Fenton-like systems, photocatalytic and sonocatalytic systems). The presence of persistent free radicals and oxygen-containing functional groups renders biochar to act as catalyst. The mechanisms accompanying catalytic performance of biochar-based catalysts have also been reviewed. However, the research in this area is quite at an initial phase, and many advancements schemes are essential prior to scale-up and commercialization. Future researches should be devoted to more efficient and rigorous understanding of the structural properties of biochar to engineer the catalytic degradation of targeted pollutants in wastewater treatment.

Oxidation of micropollutants by visible light active graphitic carbon nitride and ferrate(VI): Delineating the role of surface delocalized electrons

The treatment of recalcitrant micropollutants in water remains challenging. Ferrate(VI) (Fe^VIO₄^2-, Fe(VI)) has emerged as a green oxidant to oxidize organic molecules, however, its reactivity with recalcitrant micropollutants are sluggish. Our results demonstrate enhanced oxidation of carbamazepine (CBZ) by three types of visible light-responsive graphitic carbon nitride (g-C₃N₄) photocatalyst in absence and presence of ferrate(VI) (Fe^VIO₄^2-, Fe(VI)) under mild alkaline conditions. The g-C₃N₄ photocatalysts were prepared by thermal process using urea, thiourea, and melamine and were named as CN-U, CN-T, and CN-M, respectively. The degradation efficiency of CBZ, in both visible light-g-C₃N₄ and visible light-g-C₃N₄-Fe^VIO₄^2- systems followed the order of CN-U > CN-T > CN-M. The mechanisms for this trend was elucidated by measuring physiochemical properties of the microstructures with various surface and analytical techniques. Results suggest the dominating role of specific surface area and surface delocalized electrons of microstructures in degrading CBZ. Crystallinity, morphology, and surface functional groups may not directly associate with CBZ degradation. The CN-U has higher specific surface area and surface delocalized electrons than CN-T and CN-M and therefore the highest degradation efficiency of CBZ. The surface electrons likely generated O₂^●- and ¹O₂ in the visible light-g-C₃N₄ system. The additional oxidants, Fe^V and Fe^IV in the visible light-g-C₃N₄- Fe^VIO₄^2- system led to higher degradation efficiency than the visible light-g-C₃N₄ system. Results suggest that the surfaces of g-C₃N₄ may be prepared preferentially with high levels of delocalized electrons at the surface of microstructures to enhance degradation of micropollutants.

Enhanced Sonocatalytic Performance of Non-Metal Graphitic Carbon Nitride (g-C3N4)/Coconut Shell Husk Derived-Carbon Composite

This study focused on the modification of graphitic carbon nitride (g-C3N4) using carbon which was obtained from the pyrolysis of coconut shell husk. The sonocatalytic performance of the synthesized samples was then studied through the degradation of malachite green. In this work, pure g-C3N4, pure carbon and carbon/g-C3N4 composites (C/g-C3N4) at different weight percentages were prepared and characterized by using XRD, SEM-EDX, FTIR, TGA and surface analysis. The effect of carbon amount in the C/g-C3N4 composites on the sonocatalytic performance was studied and 10 wt% C/g-C3N4 showed the best catalytic activity. The optimization study was conducted by using response surface methodology (RSM) with a central composite design (CCD) model. Three experimental parameters were selected in RSM including initial dye concentration (20 to 25 ppm), initial catalyst loading (0.3 to 0.5 g/L), and solution pH (4 to 8). The model obtained was found to be significant and reliable with R2 value (0.9862) close to unity. The degradation efficiency of malachite green was optimized at 97.11% under the conditions with initial dye concentration = 20 ppm, initial catalyst loading = 0.5 g/L, solution pH = 8 after 10 min. The reusability study revealed the high stability of 10 wt% C/g-C3N4 as sonocatalyst. In short, 10 wt% C/g-C3N4 has a high potential for industrial application since it is cost effective, reusable, sustainable, and provides good sonocatalytic performance.