Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Anammox-based technologies: A review of recent advances, mechanism, and bottlenecks

The removal of nitrogen via the ANAMMOX process is a promising green wastewater treatment technology, with numerous benefits. The incessant studies on the ANAMMOX process over the years due to its long start-up and high operational cost has positively influenced its technological advancement, even though at a rather slow pace. At the moment, relatively new ANAMMOX technologies are being developed with the goal of treating low carbon wastewater at low temperatures, tackling nitrite and nitrate accumulation and methane utilization from digestates while also recovering resources (phosphorus) in a sustainable manner. This review compares and contrasts the handful of ANAMMOX -based processes developed thus far with plausible solutions for addressing their respective bottlenecks hindering full-scale implementation. Ultimately, future prospects for advancing understanding of mechanisms and engineering application of ANAMMOX process are posited. As a whole, technological advances in process design and patents have greatly contributed to better understanding of the ANAMMOX process, which has greatly aided in the optimization and industrialization of the ANAMMOX process. This review is intended to provide researchers with an overview of the present state of research and technological development of the ANAMMOX process, thus serving as a guide for realizing energy autarkic future practical applications.

Origin, types, and contribution of emerging pollutants to environmental degradation and their remediation by physical and chemical techniques

The growing presence of emerging pollutants (EPs) in aquatic environments, as well as their harmful impacts on the biosphere and humans, has become a global concern. Recent developments and advancements in pharmaceuticals, agricultural practices, industrial activities, and human personal care substances have paved the way for drastic changes in EP concentrations and impacts on the ecosystem. As a result, it is critical to mitigate EP's harmful effects before they jeopardize the ecological equilibrium of the overall ecosystem and the sustainable existence of life on Earth. This review comprehensively documented the types, origins, and remediation strategies of EPs, and underscored the significance of this study in the current context. We briefly stated the major classification of EPs based on their organic and inorganic nature. Furthermore, this review systematically evaluates the occurrence of EPs due to the fast-changing ecological scenarios and their impact on human health. Recent studies have critically discussed the emerging physical and chemical processes for EP removal, highlighting the limitations of conventional remediation technologies. We reviewed and presented the challenges associated with EP remediation and degradation using several methods, including physical and chemical methods, with the application of recent technologies. The EP types and various methods discussed in this review help the researchers understand the nature of present-day EPs and utilize an efficient method of choice for EP removal and management in the future for sustainable life and development activities on the planet.

Application of fungal-based microbial fuel cells for biodegradation of pharmaceuticals: Comparative study of individual vs. mixed contaminant solutions

The present study focuses on the application of fungal-based microbial fuel cells (FMFC) for the degradation of organic pollutants including Acetaminophen (APAP), Para-aminophenol (PAP), Sulfanilamide (SFA), and finally Methylene Blue (MB). The objective is to investigate the patterns of degradation (both individually and as a mixture solution) of the four compounds in response to fungal metabolic processes, with an emphasis on evaluating the possibility of generating energy. Linear Sweep Voltammetry (LSV) has been used for electrochemical analysis of the targeted compounds on a Glassy Carbon Electrode (GCE). A dual chamber MFC has been applied wherein the cathodic compartment, the reduction reaction of oxygen was catalyzed by an elaborated biofilm of Trametes trogii, and the anodic chamber consists of a mixed solution of 200 mg L-1 APAP, PAP, MB, and SFA in 0.1 M PBS and an elaborated biofilm of Trichoderma harzianum. The obtained results showed that all the tested molecules were degraded over time by the Trichoderma harzianum. The biodegradation kinetics of all the tested molecules were found to be in the pseudo-first-order. The results of half-lives and the degradation rate reveal that APAP in its individual form degrades relatively slower (0.0213 h-1) and has a half-life of 33 h compared to its degradation in a mixed solution with a half-life of 20 h. SFA showed the longest half-life in the mixed condition (98 h) which is the opposite of its degradation as individual molecules (20 h) as the fastest molecule compared to other pollutants. The maximum power density of the developed MFC dropped from 0.65 mW m-2 to 0.32 mW m-2 after 45.5 h, showing that the decrease of the residual concentration of molecules in the anodic compartment leads to the decrease of the MFC performance.

Heterogeneous catalytic ozonation for the removal of antibiotics in water: A Review

Antibiotics with pseudo-persistence in water have been regarded as emerging pollutants, which have obvious biological toxicity even at trace levels. On account of high reactivity, heterogeneous catalytic ozonation has been widely applied to remove antibiotics. Among the heterogeneous catalysts, with well-developed pores and regulable surface defects, carbon-based materials can act as both adsorbents and catalysts. Metal cations, surface hydroxyl (-OH) groups and oxygen vacancies (OVs) serve as primary active sites in metal oxides. However, composites (perovskite, apatite, etc.) with special crystalline structure have more crystallographic planes and abundant active sites. The unsaturated bonds and aromatic rings which have dense structure of the electron cloud are more likely to be attacked by ozone (O3) directly. Sulfonamides (SAs) can be oxidized by O3 directly within a short time due to the structure of activated aromatic rings and double bonds. With the existence of catalysts, almost all antibiotics can attain fair removal effects. The presence of water matrix can greatly influence the removal rate of pollutants via changing the surface properties of catalysts, competing active sites with O3, etc. Correspondingly, the application of diverse heterogeneous catalysts was introduced in details, based on modification including metal/non-metal doping, surface modification and carrier composite. The degradation pathways of SAs, fluoroquinolones (FQNs), tetracyclines (TCs) and β-lactams were summarized founded on the functional group structures. Furthermore, the effects of water matrix (pH, coexisting ions, organics) for catalytic ozonation were also debated. It is expected to proffer advanced guidance for researchers in catalytic ozonation of antibiotics.

Bioelectroremediation of a Real Industrial Wastewater: The Role of Electroactive Biofilm and Planktonic Cells through Enzymatic Activities

Bioelectrochemical processes are emerging as one of the most efficient and sustainable technologies for wastewater treatment. Their application for industrial wastewater treatment is still low due to the high toxicity and difficulty of biological treatment for industrial effluents. This is especially relevant in pharmaceutical industries, where different solvents, active pharma ingredients (APIs), extreme pH, and salinity usually form a lethal cocktail for the bacterial community in bioreactors. This work evaluates the impact of the anode architecture on the detoxification performance and analyzes, for the first time, the profile of some key bioremediation enzymes (catalase and esterase) and reactive oxygen species (ROS) during the operation of microbial electrochemical cells treating real pharmaceutical wastewater. Our results show the existence of oxidative stress and loss of cell viability in planktonic cells, while the electrogenic bacteria that form the biofilm maintain their biochemical machinery intact, as observed in the bioelectrochemical response. Monitorization of electrical current flowing in the bioelectrochemical system showed how electroactive biofilm, after a short adaptation period, started to degrade the pharma effluent. The electroactive biofilms are responsible for the detoxification of this type of industrial wastewater.

Ozonation degradation of wastewater using rotational hydrodynamic cavitation reactor with a conical rotor

Water pollution caused by an abusive discharge of dye-containing wastewater leads to serious ecological risks. Conventional wastewater treatment methods have shortcomings of incomplete degradation, long-time treatment and secondary pollution. For the first time, a rotational hydrodynamic cavitation reactor (RHCR) equipped with a conical rotor has been designed to enhance the ozonation process for effective degradation of pollutants. The effects of rotational speed, discharge voltage, gas flow rate, liquid flow rate and initial pH on methylene blue (MB) degradation were deeply investigated. The optimised conditions were initial pH = 9, rotational speed = 1800 rpm, discharge voltage = 9.3 kV, gas flow rate = 60 mL/min and liquid flow rate = 80 mL/min. With the integration of ozonation and cavitation in RHCR, the MB degradation efficiency reached 95.2%, which was 15.6% higher than that of the individual ozonation method. The degradation process was proven to track the first-order kinetic model, with the reaction rate and synergy index were 0.232 min-1 and 1.78, respectively. Through the quenching experiments, it can be confirmed that the contribution proportion of hydroxyl radical during degradation was increased by 8.7% due to the enhancement of cavitation. A required energy consumption of 74.7 kWh/order/m3 and a total expense of 8.7 $/m3 were calculated. The energy consumption of the RHCR was approximately 80% lower than that of the recently reported degradation system combining ozonation and cavitation, with total expense reduced by 52%. The findings of this work provide a new water treatment method and offered theoretical references for the design of RHCR.

Synthesis of visible-light-activated CeO2-x/BiCrO3 photocatalysts with S-scheme mechanism: Effectual performances in detoxification of various antibiotics and organic pollutants

In today's world, the development of an efficient water treatment strategy requires a prospective approach for the production of active and stable photocatalysts. The construction of heterojunctions with different semiconductors is a promising procedure for improving photocatalytic performances. In the present research, binary CeO2-x/BiCrO3 photocatalysts were synthesized using a hydrothermal route preceded by a calcination step. The CeO2-x/BiCrO3 (15%) photocatalyst proved its unique performance of 29.3, 11.4, 11.7, and 23.0 times better than CeO2 for photodegradation of respectively tetracycline hydrochloride (TCH), metronidazole (MET), azithromycin (AZM), and cephalexin (CPN), as antibiotic pollutants, upon visible light. The effective photocatalytic ability, which was caused by the impressive suppression of charge carriers, can be understood by the developed S-scheme mechanism. Moreover, the lower resistance of CeO2-x/BiCrO3 (15%) compared to CeO2, CeO2-x, and BiCrO3 against the charges transfer was another confirmation for boosted photocatalytic performance of the CeO2-x/BiCrO3 (15%) nanocomposite. Ultimately, the boosted activity, repeated utilization for five runs, and biocompatibility confirmation of the purified solution through pinto bean cultivation exhibited that CeO2-x/BiCrO3 photocatalysts could have the promising capability for detoxification of polluted water.

Percarbonate mediated advanced oxidation of irbesartan: A suitable alternative to chlorination?

This study aims to investigate the environmental fate of irbesartan when subjected to activated percarbonate treatment. The investigation delves into the formation of disinfection byproducts (DBPs) and evaluates their toxicity, and it seeks to draw comparisons with outcomes from treatment with sodium hypochlorite, already characterized in previous findings. The proposed treatment indicates the formation of at least 11 DBPs - eight identified for the first time - which have been isolated by various chromatographic techniques, identified by Nuclear Magnetic Resonance and Mass Spectrometry studies and for which a mechanism has been proposed to elucidate their formation. To evaluate irbesartan's biological impact during treatment with sodium percarbonate (SPC), a toxicity study of the DBPs was conducted using Daphnia magna, Aliivibrio fischeri, and Raphidocelis subcapitata, three model organisms. The ecotoxicity was evaluated using the Ecological Structure-Activity Relationships (ECOSAR) computer program and compared with experimental results. Compared to chlorination treatment, a lower mineralization percentage (-43 %) and amount of DBPs at least twice higher were observed. Toxicity assessment highlighted that DBPs formed during SPC treatment were more toxic than those from chlorination. ECOSAR predicted toxicity aligned with experimental findings. Additionally, the DBPs exhibited varying levels of toxicity, primarily attributable to the presence of aromatic and hydroxyl groups in their chemical structure, indicating that SPC treatment is not suitable for treatment of irbesartan polluted waters.

Exploring the potential of eco-friendly carbon dots in monitoring and remediation of environmental pollutants

Photoluminescent carbon dots (CDs) have garnered significant interest owing to their distinctive optical and electronic properties. In contrast to semiconductor quantum dots, which incorporated toxic elements in their composition, CDs have emerged as a promising alternative, rendering them suitable for both environmental and biological applications. CDs exhibit astonishing features, including photoluminescence, charge transfer, quantum confinement effect, and biocompatibility. Recently, CDs derived from green sources have drawn a lot of attention due to their strong photostability, reduced toxicity, better biocompatibility, enhanced fluorescence, and simplicity. These attributes have shown great promise in the areas of LED technology, bioimaging, photocatalysis, drug delivery, biosensing, and antibacterial activity. In contrast, this review offers a comprehensive overview of various green sources utilized to produce CDs and methodologies, along with their merits and demerits, with a notable emphasis on physiochemical properties. Additionally, the paper provides insight into the bibliometric analysis and recent advancements of CDs in sensing, photocatalysis, and antibacterial activity. In this field, extensive research is underway, and a total of 7,438 articles have been identified. Among these, 4242 articles are dedicated to sensing applications, while 1518 and 1678 focus on adsorption and degradation. Carbon dots demonstrate exceptional sensing capabilities within the nanomolar range with a selectivity of up to 95% for pollutants. They exhibit excellent degradation efficiency exceeding 90% within 10-130 min and possess an adsorption capacity from 100 to 800 mg/g. These fascinating qualities render them suitable for diverse applications.

MnFe2O4/MoS2 catalyst used for ozonation: optimization and mechanism analysis of phenolic wastewater treatment

The performance of catalytic ability of MFe2O4/MoS2 in the ozonation process was investigated in this work. The synthesized MnFe2O4/MoS2 was optimize prepared and then characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photo-electron spectroscopy, and magnetic saturation strength. The results showed that when Cphenol = 200 mg/L, initial pH = 9.0, Q = 0.10 L/min, and CMnFe2O4/MoS2 = 0.10 g/L, MnFe2O4/MoS2 addition improved the degradation efficiency of phenol by 20.0%. The effects of pH, catalyst dosage, and inorganic ions on the phenol removal by the MnFe2O4/MoS2 catalytic ozonation were investigated. Five cycle experiments proved that MnFe2O4/MoS2 had good recyclability and stability. MnFe2O4/MoS2 also showed good catalytic performance in the treatment of coal chemical wastewater pesticide wastewater. The MnFe2O4 doped with MoS2 could provide abundant surface active sites for ozone and promote the stable cycle of Mn2+/Mn3+and Fe2+/Fe3+, thus generating large amounts of •OH and improving the degradation of phenol by ozonation. The MnFe2O4/MoS2/ozonation treatment system provides a technical reference and theoretical basis for industrial wastewater treatment.

Catalytic ozonation of reverse osmosis concentrate from coking wastewater reuse by surface oxidation over Mn-Ce/γ-Al2O3: Effluent organic matter transformation and its catalytic mechanism

Degradation of organics in high-salinity wastewater is beneficial to meeting the requirement of zero liquid discharge for coking wastewater treatment. Creating efficient and stable performance catalysts for high-salinity wastewater treatment is vital in catalytic ozonation process. Compared with ozonation alone, Mn and Ce co-doped γ-Al2O3 could remarkably enhance activities of catalytic ozonation for chemical oxygen demand (COD) removal (38.9%) of brine derived from a two-stage reverse osmosis treatment. Experimental and theoretical calculation results indicate that introducing Mn could increase the active points of catalyst surface, and introducing Ce could optimize d-band electronic structures and promote the electron transport capacity, enhancing HO• bound to the catalyst surface ([HO•]ads) generation. [HO•]ads plays key roles for degrading the intermediates and transfer them into low molecular weight organics, and further decrease COD, molecular weights and number of organics in reverse osmosis concentrate. Under the same reaction conditions, the presence of Mn/γ-Al2O3 catalyst can reduce ΔO3/ΔCOD by at least 37.6% compared to ozonation alone. Furthermore, Mn-Ce/γ-Al2O3 catalytic ozonation can reduce the ΔO3/ΔCOD from 2.6 of Mn/γ-Al2O3 catalytic ozonation to 0.9 in the case of achieving similar COD removal. Catalytic ozonation has the potential to treat reverse osmosis concentrate derived from bio-treated coking wastewater reclamation.

Catalytic ozonation of reverse osmosis membrane concentrates by catalytic ozonation: Properties and mechanisms

Ni-Mn@KL ozone catalyst was prepared for the efficient treatment of reverse osmosis membrane concentrates. The working conditions and reaction mechanism of the ozone-catalyzed oxidation by Ni-Mn@KL were systematically studied. Then, a comprehensive CRITIC weighting-coupling coordination evaluation model was established. Ni-Mn@KL was characterized by scanning electron microscopy, BET, X-ray diffraction, X-ray photoelectron spectroscopy, energy-dispersive spectrometry, and X-ray fluorescence spectrometry and found to have large specific surface area and homogeneous surface dispersion of striped particles. Under the optimum working conditions with an initial pH of 7.9 (raw water), a reaction height-to-diameter ratio of 10:1, an ozone-aeration intensity of 0.3 L/min, and a catalyst filling rate of 10%, the maximum COD removal rate was 60.5%. Free-radical quenching experiments showed that OH oxidation played a dominant role in the Ni-Mn@KL-catalyzed ozone-oxidation system, and the reaction system conformed to the second-order reaction kinetics law. Ni-Mn@KL catalysts were further confirmed to have good catalytic performance and mechanical performance after repeated utilization. PRACTITIONER POINTS: Ni-Mn@KL catalyst can achieve effective treatment of RO film concentrated liquid. High COD removal rate of RO membrane concentrated liquid was obtained at low cost. Ni-Mn@KL catalyst promotes ozone decomposition to produce ·OH and O2 -· oxidized organic matter. The Ni-Mn@KL catalyst can maintain good stability after repeated use. A CRITIC weight-coupling coordination model was established to evaluate the catalytic ozonation.

Understanding Stimulation of Conjugal Gene Transfer by Nonantibiotic Compounds: How Far Are We?

A myriad of nonantibiotic compounds is released into the environment, some of which may contribute to the dissemination of antimicrobial resistance by stimulating conjugation. Here, we analyzed a collection of studies to (i) identify patterns of transfer stimulation across groups and concentrations of chemicals, (ii) evaluate the strength of evidence for the proposed mechanisms behind conjugal stimulation, and (iii) examine the plausibility of alternative mechanisms. We show that stimulatory nonantibiotic compounds act at concentrations from 1/1000 to 1/10 of the minimal inhibitory concentration for the donor strain but that stimulation is always modest (less than 8-fold). The main proposed mechanisms for stimulation via the reactive oxygen species/SOS cascade and/or an increase in cell membrane permeability are not unequivocally supported by the literature. However, we identify the reactive oxygen species/SOS cascade as the most likely mechanism. This remains to be confirmed by firm molecular evidence. Such evidence and more standardized and high-throughput conjugation assays are needed to create technologies and solutions to limit the stimulation of conjugal gene transfer and contribute to mitigating global antibiotic resistance.

MoS2@MWCNTs with Rich Vacancy Defects for Effective Piezocatalytic Degradation of Norfloxacin via Innergenerated-H2O2: Enhanced Nonradical Pathway and Synergistic Mechanism with Radical Pathway

Molybdenum disulfide (MoS2)-based materials for piezocatalysis are unsatisfactory due to their low actual piezoelectric coefficient and poor electrical conductivity. Herein, 1T/3R phase MoS2 grown in situ on multiwalled carbon nanotubes (MWCNTs) was proposed. MoS2@MWCNTs exhibited the interwoven morphology of thin nanoflowers and tubes, and the piezoelectric response of MoS2@MWCNTs was 4.07 times higher than that of MoS2 via piezoresponse force microscopy (PFM) characterization. MoS2@MWCNTs exhibited superior activity with a 91% degradation rate of norfloxacin (NOR) after actually working 24 min (as for rhodamine B, reached 100% within 18 min) by pulse-mode ultrasonic vibration-triggered piezocatalysis. It was found that piezocatalysis for removing pollutants was attributed to the synergistic effect of free radicals (•OH and O2•-) and nonfree radical (1O2, key role) pathways, together with the innergenerated-H2O2 promoting the degradation rate. 1O2 can be generated by electron transfer and energy transfer pathways. The presence of oxygen vacancies (OVs) induced the transformation of O2 to 1O2 by triplet energy transfer. The fast charge transfer in MoS2@MWCNTs heterostructure and the coexistence of sulfur vacancies and OVs enhanced charge carrier separation resulting in a prominent piezoelectric effect. This work opens up new avenues for the development of efficient piezocatalysts that can be utilized for environmental purification.

Degradation of veterinary antibiotics by the ozonation process: Product identification and ecotoxicity assessment

The purpose of the study was to evaluate the effects of using of ozonation to remove antibiotics used, among others, in veterinary medicine, from the aqueous environment. The effect of this process on the degradation, mineralisation and ecotoxicity of aqueous solutions of ampicillin, doxycycline, tylosin, and sulfathiazole was investigated. Microbiological MARA® bioassay and two in silico methods were used for the ecotoxicity assessment. Ozonation was an effective method for the degradation of the antibiotics studied and the reduction in ecotoxicity of the solutions. However, after ozonation, the solutions contained large amounts of organic products, including compounds much less susceptible to ozonation than the initial antibiotics. Structures of 14, 12, 40 and 10 degradation products for ampicillin, doxycycline, tylosin, and sulfathiazole, respectively, were proposed. It was confirmed that ozone plays a greater role than hydroxyl radicals in the degradation of these antibiotics, with the exception of TYL. The use of ozonation to obtain a high degree of mineralisation is unfavourable and it is suggested to combine ozonation with biodegradation. The pre-ozonation will cause decomposition of antibiotic pharmacophores, which significantly reduces the risk of spread of antimicrobial resistance in the active biocenosis of wastewater treatment plants.

Degradation of pharmaceuticals and other emerging pollutants employing bi-metal catalysts/magnesium and/or (green) hydrogen in aqueous solution

Contaminations by pharmaceuticals, personal care products, and other emerging pollutants in water resources have become a seriously burgeoning issue of global concern in the first third of the twenty-first century. As societal reliance on pharmaceuticals continues to escalate, the inadvertent introduction of these substances into water reservoirs poses a consequential environmental threat. Therefore, the aim of this study was to investigate reductive degradation, particularly, catalytic hydrogenation regarding model pollutants such as diclofenac (DCF), ibuprofen (IBP), 17α-ethinylestradiol (EE2), or bisphenol-A (BPA), respectively,  in aqueous solutions at lab scale. Iron bimetals (zero valent iron, ZVI, and copper, Cu, or nickel, Ni) as well as zero valent magnesium (Mg, ZVM) in combination with  rhodium, Rh, or palladium, Pd, as hydrogenation catalysts (HK), were investigated. Studies were executed through various short-term batch experiments, with multiple sample collections, over a total range of 120 min. The results indicated that DCF was attenuated at over 90 % when exposed to Fe-Cu or a Fe-Ni bimetal (applied as a single model pollutant). However, when DCF was part of a mixture alongside with IBP, EE2, and BPA, the attenuation efficacy decreased to 79 % with Fe-Cu and 23 % with Fe-Ni. Conversely, both IBP and BPA exhibit notably low attenuation levels with both bimetals, less than 50 %, both deployed as single substances or in mixtures. No reaction (degradation) products could be identified employing LC-MS, but sometimes a release of the parent pollutant when applying an acetic acid buffer could be noted to a certain extent, suggesting adsorption processes on corrosion products such as iron hydroxide and/or oxides. Surprisingly, Mg in combination with Rh (Rh-HK) or Pd (Pd-HK) showed a significantly rapid decrease in the concentrations of DCF, EE2, and BPA, in part up to approximately 100 %, that is, within a few minutes only in part due to hydrogenation degradation reactions (related reaction products could actually be identified by LC-MS; adsorption processes were not observed here). Moreover, kinetic modeling of the DCF degradation with Mg-Rh-HK was conducted at different temperatures (15 °C, 20 °C, 25 °C, 35 °C) and varied initial concentrations (2.5 mg/L, 5.0 mg/L, 7.5 mg/L, 10.0 mg/L). The outcomes prove that the degradation of DCF at the Rh-HK's surface followed a modified first-order kinetics, most probably by catalytic hydrodehalogenation and subsequent hydrogenation of the aromatic moieties (molecular hydrogen was provided by the corrosion of Mg). From the determined reaction rate constants at four different temperatures, the activation energy was estimated to be 59.6 kJ/mol by means of the Arrhenius equation what is in good agreement with similar results reported in the literature. This coupled hydrodehalogenation and hydrogenation approach may be upscaled into a new promising technical process for comprehensively removing such pharmaceuticals and similar pollutants in sewage plants in a single step, furthermore, even in combination with adsorption by activated carbon and/or ozonation which have already been established at some sewage plants in Switzerland and Germany recently.

Synergistic effects of β-NaFeO2 ferrite nanoparticles for photocatalytic degradation, antibacterial, and antioxidant applications

Here, synthesis and thorough characterization of β-NaFeO2 nanoparticles utilizing a co-precipitation technique is presented. XRD analysis confirmed a hexagonal-phase structure of β-NaFeO2. SEM revealed well-dispersed spherical nanoparticles with an average diameter of 45 nm. The FTIR spectrum analysis revealed weak adsorption bands at 1054 cm-1 suggested metal-metal bond stretching (Fe-Na). UV-Visible spectroscopy indicates a 4.4 eV optical band gap. Colloidal stability of β-NaFeO2 was evidenced via Zeta potential (-28.5 mV) and Dynamic Light Scattering (DLS) measurements. BET analysis reveals a substantial 343.27 m2 g-1 surface area with mesoporous characteristics. Antioxidant analysis indicates efficacy comparable to standard antioxidants, while concentration-dependent antibacterial effects suggest enhanced efficacy against Gram-positive bacteria, particularly Streptococcus. The Photocatalytic activity of β-NaFeO2 showed significant pollutant degradation (>90% efficiency), with increased degradation rates at higher nanoparticle concentrations, indicating potential for environmental remediation applications.

Enhanced ozonation of vanillin catalyzed by highly efficient magnetic MnFe2O4/ZIF-67 catalysts: Synergistic effects and mechanism insights

In this study, we synthesized magnetic MnFe2O4/ZIF-67 composite catalysts using a straightforward method, yielding catalysts that exhibited outstanding performance in catalyzing the ozonation of vanillin. This exceptional catalytic efficiency arose from the synergistic interplay between MnFe2O4 and ZIF-67. Comprehensive characterization via x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), Fourier transform infrared spectrometer (FT-IR), Brunauer-Emmett-Teller (BET), field emission scanning electron microscopy (FE-SEM), and energy dispersive spectroscopy (EDS) confirmed that the incorporation of MnFe2O4 promoted the creation of oxygen vacancies, resulting in an increased presence of l adsorbed oxygen (Oads) and the generation of additional ·OH groups on the catalyst surface. Utilizing ZIF-67 as the carrier markedly enhanced the specific surface area of the catalyst, augmenting the exposure of active sites, thus improving the degradation efficiency and reducing the energy consumption. The effects of different experimental parameters (catalyst type, initial vanillin concentration, ozone dosage, initial pH value, and catalyst dosage) were also investigated, and the optimal experimental parameters (300 mg/L1.0-MnFe2O4/ZIF-67, vanillin concentration = 250 mg/L, O3 concentration = 12 mg/min, pH = 7) were obtained. The vanillin removal efficiency of MnFe2O4/ZIF-67 was increased from 74.95% to 99.54% after 30 min of reaction, and the magnetic separation of MnFe2O4/ZIF-67 was easy to be recycled and stable, and the vanillin removal efficiency of MnFe2O4/ZIF-67 was only decreased by about 8.92% after 5 cycles. Additionally, we delved into the synergistic effects and catalytic mechanism of the catalysts through kinetic fitting, reactive oxygen quenching experiments, and electron transfer analysis. This multifaceted approach provides a comprehensive understanding of the enhanced ozonation process catalyzed by MnFe2O4/ZIF-67 composite catalysts, shedding light on their potential applications in advanced oxidation processes. PRACTITIONER POINTS: A stable and recyclable magnetic composite MnFe2O4/ZIF-67 catalyst was synthesized through a simple method. The synergistic effect and catalytic mechanism of the MnFe2O4/ZIF-67 catalyst were comprehensively analyzed and discussed. A kinetic model for the catalytic ozone oxidation of vanillin was introduced, providing valuable insights into the reaction dynamics.

Efficient removal of triclosan from water through activated carbon adsorption and photodegradation processes

This study investigated the application of adsorption with activated carbons (ACs) and photodegradation to reduce the concentration of triclosan (TCS) in aqueous solutions. Concerning adsorption, ACs (Darco, Norit, and F400) were characterised and batch experiments were performed to elucidate the effect of pH on equilibrium. The results showed that at pH = 7, the maximum adsorption capacity of TCS onto the ACs was 18.5 mg g-1 for Darco, 16.0 mg g-1 for Norit, and 15.5 mg g-1 for F400. The diffusional kinetic model allowed an adequate interpretation of the experimental data. The effective diffusivity varied and increased with the amount of TCS adsorbed, from 1.06 to 1.68 × 10-8 cm2 s-1. In the case of photodegradation, it was possible to ensure that the triclosan molecule was sensitive to UV light of 254 nm because the removal was over 80 % using UV light. The removal of TCS increased in the presence of sulfate radicals. It was possible to identify 2,4-dichlorophenol as one of the photolytic degradation products of triclosan, which does not represent an environmental hazard at low concentrations of triclosan in water. These results confirm that the use of AC Darco, Norit, and F400 and that photodegradation processes with UV light and persulfate radicals are effective in removing TCS from water, reaching concentration levels that do not constitute a risk to human health or environmental hazard. Both methods effectively eliminate pollutants with relatively easy techniques to implement.

Integrated model of ozone mass transfer and oxidation kinetic: Construction, solving and analysis

Ozone-based advanced oxidation process (O3-AOPs) is rapidly evolving, but the surge of emerging pollutants brings new challenges for ozone oxidation research. Herein, we proposed a state-of-the-art model for simultaneously analyzing both ozone mass transfer and oxidation kinetics during ozone oxidation of emerging organic contaminants. The numerical solution and graphical representations of the integrated model were utilized to analyze the dynamics of ozone and pollutant concentration. An in-depth analysis of the integrated model revealed that the reaction rate constants in this present study were higher than previously reported apparent reaction rate constants, and catalysts were not always necessary. Finally, we developed an installable mobile application (APP) that allowed the simulation of the dynamic process for ozone oxidizing organic pollutants in the laboratory, which offered theoretical support for the selection of experimental conditions. The results of model simulation not only provide scientific explanations for counter-intuitive experimental phenomena, but also optimized experimental conditions to enhance ozone utilization.

Synchronous removal of oxytetracycline and Cr(Ⅵ) in Fenton-like photocatalysis process driven by MnFe2O4/g-C3N4: Performance and mechanisms

Complex wastewater has more complicated toxicity and potential harm to organisms, and synchronous REDOX of complex pollutants in wastewater has always been a bottleneck in the development of advanced oxidation technology. Herein, a Fenton-like photocatalytic system (MnFe2O4/g-C3N4 heterojunction composites) was established to simultaneously remove oxytetracycline (OTC) and Cr(Ⅵ) in this study. The MnFe2O4/g-C3N4 heterojunction composites exhibited outstanding catalytic performances for OTC and Cr(Ⅵ) removal, and more than 90% of OTC and nearly 100% of Cr(Ⅵ) were simultaneously removed within 1 min photocatalysis. The photo-generared electrons and holes played significant roles in Cr(Ⅵ) reduction and OTC degradation, respectively. Moreover, the heterojunction formed between g-C3N4 and MnFe2O4 effectively accelerated the separation and migration of photogenerated carriers. The OTC degradation was mainly initiated by cracking of benzene rings, degradation of substituents, and removal of groups such as -OH, -NH2, -CH3, and -CONH2, resulting in generation of small molecular substances; Cr(Ⅲ) was the main reduction product of Cr(Ⅵ). Meanwhile, the MnFe2O4/g-C3N4 heterojunction composites also exhibited excellent stability and reusability in removal of OTC and Cr(Ⅵ).

Targeted regulation of digestate dewaterability by the ozone/persulfate oxidation process

Dewatering is the first step in the subsequent treatment and disposal of food waste digestate (FWD). However, FWD is difficult to dewatering. In this study, persulfate was synergistic oxidized by ozone to improve digestate dewaterability. The optimal conditions was at pH = 3, O3＝40 mg/g TS and PDS＝0.1 g/g TS, under which the reductions in the normalized capillary suction time (NCST) and bound moisture (BM) of the FWD were 89.97% and 65.79%, respectively. Hydrophilic functional groups (oxygen- and nitrogen-containing groups) and hydrophilic protein molecular structures were decomposed by the reactive species of sulfate radical (SO4·-) and hydroxyl radicals (·OH) generated in the ozone-persulfate oxidation process, disrupting the binding between EPS and water molecules. The contributions of SO4·- and ·OH to digestate dewaterability were 42.51% and 28.55%. In addition, the introduction of H+ reduced electrostatic repulsion and contributed to the condensation of digestate flocs. The environmental implication assessment and economic analysis suggested that the O3/PDS oxidation process was cost-effective and has a low environmental implication when applied to the FWD dewaterability improvement process. These results can serve as a reference for the management of FWD and further improvement of FWD treatment and disposal efficiency.

Current trends in textile wastewater treatment-bibliometric review

A bibliometric study using 1992 to 2021 database of the Science Citation Index Expanded was carried out to identify which are the current trends in textile wastewater treatment research. The study aimed to analyze the performance of scholarly scientific communications in terms of yearly publications/citations, total citations, scientific journals, and their categories in the Web of Sciences, top institutions/countries and research trends. The annual publication of scientific articles fluctuated in the first ten years, with a steady decrease for the last twenty years. An analysis of the most common terms used in the authors' keywords, publications' titles, and KeyWords Plus was carried out to predict future trends and current research priorities. Adsorbent nanomaterials would be the future of wastewater treatment for decoloration of the residual dyes in the wastewater. Membranes and electrolysis are important to demineralize textile effluent for reusing wastewater. Modern filtration techniques such as ultrafiltration and nanofiltration are advanced membrane filtration applications.

Sustainable Electrochemical Activation of Self-Generated Persulfate for the Degradation of Endocrine Disruptors: Kinetics, Performances, and Mechanisms

This study presents an electrolysis system utilizing a novel self-circulation process of sulfate (SO42-) and persulfate (S2O82-) ions based on a boron-doped diamond (BDD) anode and an activated carbon fiber (ACF) cathode, which is designed to enable electrochemical remediation of environmental contaminants with reduced use of chemical reagents and minimized residues. The production of S2O82- and hydrogen peroxide (H2O2) on the BDD anode and ACF cathode, respectively, is identified as the source of active radicals for the contaminant degradation. The initiator, sulfate, is identified by comparing the degradation efficiency in NaSO4 and NaNO3 electrolytes. Quenching experiments and electron paramagnetic resonance (EPR) spectroscopy confirmed that the SO4-· and ·OH generated on the ACF cathode are the main reactive radicals. A comparison of the degradation efficiency and the generated S2O82-/H2O2 of the divided/undivided electrolysis system is used to demonstrate the superiority of the synergistic effect between the BDD anode and ACF cathode. This work provides evidence of the effectiveness of the philosophy of "catalysis in lieu of supplementary chemical agents" and sheds light on the mechanism of the generation and transmission of reactive species in the BDD and ACF electrolysis system, thereby offering new perspectives for the design and optimization of electrolysis systems.

Efficient catalytic activity of NiO and CeO2 films in benzoic acid removal using ozone

This research focuses on the synthesis of NiO and CeO2 thin films using spray pyrolysis for the removal of benzoic acid using ozone as an oxidant. The results indicate that the addition of CeO2 films significantly enhances the mineralization of benzoic acid, achieving a rate of over 80% as the CeO2 films react with ozone to produce strong oxidant species, such as hydroxyl radicals, superoxide radicals, and singlet oxygen as demonstrated by the presence of quenchers in the reaction system. The difference in catalytic activity between NiO and CeO2 films was analyzed via XPS technique; specifically, hydroxyl oxygen groups in the CeO2 film were greater in number than those in the NiO film, thus benefitting catalytic oxidation as these species are considered active oxidation sites. The effects of nozzle-substrate distances and deposition time during the synthesis of the films on benzoic acid removal efficiency were also explored. Based on XRD characterization, it was established that the NiO and CeO2 films were polycrystalline with a cubic structure. NiO spherical nanoparticles were well-distributed on the substrate surface, while some pin holes and overgrown clusters were observed in the CeO2 films according to the SEM results. The stability of the CeO2 films after five consecutive cycles confirms their reusability. The retrieval of films is easy because it does not require additional separation methods, unlike the catalyst in powder form. The obtained results indicate that the CeO2 films have potential application in pollutant removal from water through catalytic ozonation.

Inactivation of antibiotic-resistant bacteria in hospital wastewater by ozone-based advanced water treatment processes

The emergence and spread of antimicrobial resistance (AMR) continue on a global scale. The impacts of wastewater on the environment and human health have been identified, and understanding the environmental impacts of hospital wastewater and exploring appropriate forms of treatment are major societal challenges. In the present research, we evaluated the efficacy of ozone (O3)-based advanced wastewater treatment systems (O3, O3/H2O2, O3/UV, and O3/UV/H2O2) for the treatment of antimicrobials, antimicrobial-resistant bacteria (AMRB), and antimicrobial resistance genes (AMRGs) in wastewater from medical facilities. Our results indicated that the O3-based advanced wastewater treatment inactivated multiple antimicrobials (>99.9%) and AMRB after 10-30 min of treatment. Additionally, AMRGs were effectively removed (1.4-6.6 log10) during hospital wastewater treatment. The inactivation and/or removal performances of these pollutants through the O3/UV and O3/UV/H2O2 treatments were significantly (P < 0.05) better than those in the O3 and O3/H2O2 treatments. Altered taxonomic diversity of microorganisms based on 16S rRNA gene sequencing following the O3-based treatment showed that advanced wastewater treatments not only removed viable bacteria but also removed genes constituting microorganisms in the wastewater. Consequently, the objective of this study was to apply advanced wastewater treatments to treat wastewater, mitigate environmental pollution, and alleviate potential threats to environmental and human health associated with AMR. Our findings will contribute to enhancing the effectiveness of advanced wastewater treatment systems through on-site application, not only in wastewater treatment plants (WWTPs) but also in medical facilities. Moreover, our results will help reduce the discharge of AMRB and AMRGs into rivers and maintain the safety of aquatic environments.

In-situ sludge reduction based on Mn2+-catalytic ozonation conditioning: Feasibility study and microbial mechanisms

To improve the sludge conditioning efficiency without increasing the ozone dose, an in-situ sludge reduction process based on Mn2+-catalytic ozonation conditioning was proposed. Using ozone conditioning alone as a control, a lab-scale sequencing batch reactor coupled with ozonated sludge recycle was evaluated for its operating performance at an ozone dose of 75 mg O3/g VSS and 1.5 mmol/L Mn2+ addition. The results showed a 39.4% reduction in MLSS and an observed sludge yield of 0.236 kg MLSS/kg COD for the O3+Mn2+ group compared to the O3 group (15.3% and 0.292 kg MLSS/kg COD), accompanied by better COD, NH4+-N, TN and TP removal, improved effluent SS and limited impact on excess sludge properties. Subsequently, activity tests, BIOLOG ECO microplates and 16S rRNA sequencing were applied to elucidate the changing mechanisms of Mn2+-catalytic ozonation related to microbial action: (1) Dehydrogenase activity reached a higher peak. (2) Microbial utilization of total carbon sources had an elevated effect, up to approximately 18%, and metabolic levels of six carbon sources were also increased, especially for sugars and amino acids most pronounced. (3) The abundance of Defluviicoccus under the phylum Proteobacteria was enhanced to 12.0% and dominated in the sludge, they had strong hydrolytic activity and metabolic capacity. Denitrifying bacteria of the genus Ferruginibacter also showed an abundance of 7.6%, they contributed to the solubilization and reduction of sludge biomass. These results could guide researchers to further reduce ozonation conditioning costs, improve sludge management and provide theoretical support.

Membrane-catalysis integrated system for contaminants degradation and membrane fouling mitigation: A review

The integration of catalytic degradation and membrane separation processes not only enables continuous degradation of contaminants but also effectively alleviates inevitable membrane fouling, demonstrating fascinating practical value for efficient water purification. Such membrane-catalysis integrated system (MCIS) has attracted tremendous research interest from scientists in chemical engineering and environmental science recently. In this review, the advantages of MCIS are discussed, including the membrane structure regulation, stable catalyst loading, nano-confinement effect, and efficient natural organic matter (NOM) exclusion, highlighting the synergistic effect between membrane separation and catalytic process. Subsequently, the design considerations for the fabrication of catalytic membranes, including substrate membrane, catalytic material, and fabrication method, are comprehensively summarized. Afterward, the mechanisms and performance of MCIS based on different catalytic types, including liquid-phase oxidants/reductants involved MCIS, gas involved MCIS, photocatalysis involved MCIS, and electrocatalysis involved MCIS are reviewed in detail. Finally, the research direction and future perspectives of catalytic membranes for water purification are proposed. The current review provides an in-depth understanding of the design of catalytic membranes and facilitates their further development for practical applications in efficient water purification.

Construction of highly dispersed iron active sites for efficient catalytic ozonation of bisphenol A

The essential factor of catalytic ozonation technology relies on an efficient and stable catalyst. The construction of highly dispersed active sites on heterogeneous catalysts is an ideal strategy to combine the merits of homogeneous and heterogeneous catalysis with high activity and stability. Herein, an iron-containing mesoporous silica material (Fe-SBA15) with sufficient iron site exposure and enhanced intrinsic activity of active sites was employed to activate ozone for bisphenol A (BPA) degradation. Approximately 100% of BPA and 36.6% of total organic carbon (TOC) removal were realized by the Fe-SBA15 catalytic ozonation strategy with a reaction constant of 0.076 min-1, well beyond the performance of FeOx/SBA15 mixture and Fe2O3. Radical quenching experiments and electron paramagnetic resonance (EPR) analysis demonstrated that the hydroxyl radicals (HO•) and superoxide radicals (O2•-) played an important role in the degradation process. The iron sites with recyclable Fe(III)/Fe(II) pairs act as both the electron donors and active sites for catalytic ozonation. The mesoporous framework of SBA15 in Fe-SBA15 stabilizes the iron sites that enhance its stability. With high catalytic performance and high reusability for catalytic ozonation of BPA, the Fe-SBA15 is expected to be a promising catalyst in catalytic ozonation for wastewater treatment.

Functionalized gum acacia-activated carbon-CaO/NiO nanocomposite for potential photocatalytic removal of organic pollutants from water

A functionalized gum acacia-activated carbon-CaO/NiO nanocomposite was synthesized using an eco-friendly sol-gel method. The formed nanocomposite was designed to apply various light sources to enhance the improved removal of organic dyes such as methylene blue, methyl orange, methyl red, and rhodamine B from aqueous media. The band gap energies of CaO, NiO nanoparticles and gum acacia-activated carbon were 3.54, 4.28, and 5.34 eV, respectively, corresponding to a reflection edge of 350, 290, and 232 nm, respectively. The surface area of the synthesized nanocomposite was measured to be 17.892 m2 g-1. Sunlight and 20 mg L-1 of the nanocomposite quenched the dyes (methylene blue, 99.7%; methyl orange, 98.3%; methyl red, 96.7%; and rhodamine B, 93.5%) after 120, 100, 100, and 75 min of irradiation, respectively. However, after 80, 100, 100, and 75 min, the percentage of dyes under UV light irradiation was 98.6%, 95.8%, 98.4%, and 94.2% for methylene blue, methyl orange, methyl red, and rhodamine B, respectively. The nanocomposite showed excellent stability after five cycles of dye reduction.

Multi-antibiotics removal under UV-A light using sol-gel prepared TiO2: Central composite design, effect of persulfate addition and degradation pathway study

The removal of three antibiotics i.e., metronidazole (MNZ), ciprofloxacin (CIP) and tetracycline (TET), from aqueous system via TiO2 photocatalysis under UV-A light was investigated. Photocatalyst(s) were prepared using sol-gel method under different calcination temperatures (400-800 °C) and water-alcohol ratio. The spherical shaped catalyst (mean particle size ∼ 61 nm) was characterized via FTIR, XRD, BET, SEM, Raman, XPS, UV-DRS, and Fluorometry, and point of zero charge was also determined (pHPZC ∼ 6.6). Batch photo-catalytic degradation studies have shown complete degradation of MNZ, CIP and TET after 50, 75 and 20 min with a TOC removal of 37%, 44% and 31%, respectively. The activity of sol-gel prepared TiO2 was comparatively higher than commercially available pure anatase TiO2 nanoparticles due to lesser mean particle size. The ratio of water to alcohol in the preparation of TiO2 catalyst was found to have significant effect on antibiotic removal. Moreover, persulfate (PS) addition of 0.1 g/L amplified the pseudo-first-order removal-rate constant by 2.75, 3.3 and 1.6 times for MNZ, CIP and TET, respectively. The higher initial pH values (8 and 10) have shown the best removal efficiency for all antibiotics. Subsequently, central composite design (CCD) experiments were conducted under multi-antibiotic conditions. Near complete removal of all antibiotics were observed within 120 min. Scavenging studies revealed that hydroxyl and superoxide radicals play major roles in photo-catalytic degradation of MNZ, CIP and TET. During photocatalysis, MNZ degradation was initiated by hydroxylation reaction, CIP by piperazine ring opening by hydroxyl attack and TET by multiple hydroxylation process. Overall, TiO2 showed good efficiency at degrading multiple antibiotics and has the potential for practical application on a larger scale.

Epsilon-MnO2 simply prepared by redox precipitation as an efficient catalyst for ciprofloxacin degradation by activating peroxymonosulfate

Four kinds of manganese oxides were successfully prepared by hydrothermal and redox precipitation methods, and the obtained oxides were used for CIP removal from water by activating PMS. The microstructure and surface properties of four oxides were systematically characterized. The results showed that ε-MnO2 prepared by the redox precipitation method had large surface area, low crystallinity, high surface Mn(III)/Mn(Ⅳ) ratio and the highest activation efficiency for PMS, that is, when the concentration of PMS was 0.6 g/L, 0.2 g/L ε-MnO2 could degrade 93% of CIP within 30 min. Multiple active oxygen species, such as sulfate radical, hydroxyl radical and singlet oxygen, were found in CIP degradation, among which sulfate radical was the most important one. The degradation reaction mainly occurred on the surface of the catalyst, and the surface hydroxyl group played an important role in the degradation. The catalyst could be regenerated in situ through the redox reaction between Mn4+ and Mn3+. The ε-MnO2 had the advantages of simple preparation, good stability and excellent performance, which provided the potential for developing new green antibiotic removal technology.

Exploring the gas-sensing properties of MOF-derived TiN@CuO as a hydrogen sulfide sensor

In an effort to develop a long-lasting gas sensor, this article presents titanium nitride (TiN) as a potential substitute sensitive material in conjunction with (copper(II) benzene-1,3,5-tricarboxylate) Cu-BTC-derived CuO. The work focused on the gas-sensing characteristics of TiN/CuO nanoparticles in detecting H2S gas at various temperatures and concentrations. XRD, XPS, and SEM were utilized to analyze the composites with varied Cu molar ratios. The responses of TiN/CuO-2 nanoparticles to 50 and 100 ppm H2S gas at 50 °C and 250 °C are 34.8 and 60.0, respectively. The related sensor had high selectivity and stability towards H2S, and the response of TiN/CuO-2 is still 2.5-5 ppm H2S. The gas-sensing properties as well as the mechanism are fully explained in this study. TiN/CuO might be a choice for the detection of H2S gas, opening up new avenues for applications in industries, medical facilities, and homes.

Eco-friendly oxidation of a reactive textile dye by CaO2: effects of specific independent parameters

Textile wastewater containing dyes poses significant risks to the environment. Advanced oxidation processes (AOPs) effectively eliminate dyes by converting them into harmless substances. However, AOPs have drawbacks such as sludge formation, metal toxicity, and high cost. As an alternative to AOPs, calcium peroxide (CaO2) offers an eco-friendly and potent oxidant for dye removal. Unlike certain AOPs that generate sludge, CaO2 can be directly employed without resulting in sludge formation. This study examines the use of CaO2 for oxidizing Reactive Black 5 (RB5) in textile wastewater without any activator. Various independent factors-pH, CaO2 dosage, temperature, and certain anions-were investigated for their influence on the oxidation process. The effects of these factors on dye oxidation were analyzed using the Multiple Linear Regression Method (MLR). CaO2 dosage was determined to be the most influential parameter for RB5 oxidation, while the optimal pH for oxidation with CaO2 was found to be 10. The study determined that 0.5 g of CaO2 achieved approximately 99% efficiency in oxidizing 100 mg/L of RB5. Additionally, the study revealed that the oxidation process is endothermic, with an activation energy (Ea) and standard enthalpy (ΔH°) for RB5 oxidation by CaO2 determined as 31.135 kJ mol-1 and 110.4 kJ mol-1, respectively. The presence of anions decreased RB5 oxidation, with decreasing effectiveness observed in the order of PO43-, SO42-, HCO3-, Cl-, CO32-, and NO3-. Overall, this research highlights CaO2 as an effective, easy-to-use, eco-friendly, and cost-efficient method for removing RB5 from textile wastewater.

Inhibition of bromate formation in plasmon-enhanced catalytic ozonation over silver-doped spinel ferrite

High energy consumption and formation of harmful byproducts are two challenges faced by advanced oxidation processes (AOPs). While much research efforts have been devoted to improving the treatment efficiency, byproduct formation and control calls for more attention. In this study, the underlying mechanism of bromate formation inhibition during a novel plasmon-enhanced catalytic ozonation process with silver-doped spinel ferrite (0.5wt%Ag/MnFe2O4) as the catalysts was investigated. By scrutinizing the effects of each factor (i.e. irradiation, catalyst, ozone) as well as the combinations of different factors on major Br species involved in bromate formation, examining the distribution of Br species, and probing the reactive oxygen species partaking in the reactions, it was found that accelerated ozone decomposition which inhibited two main bromate formation pathways and surface reduction of Br species (e.g. HOBr/OBr- and BrO3-) contributed to the inhibition of bromate formation, both of which can be enhanced by the plasmonic effects of Ag and the good affinity between Ag and Br. A kinetic model was developed by simultaneously solving 95 reactions to predict the aqueous concentrations of Br species during different ozonation processes. The good agreement between the model prediction and experimental data further corroborated the hypothesized reaction mechanism.

Application of photocatalytic proxone process for petrochemical wastewater treatment

Industrial wastewaters are different from sanitary wastewaters, and treatment complications due to their unique characteristics, so biological processes are typically disrupted. High chemical oxygen demand, dye, heavy metals, toxic organic and non-biodegradable compounds present in petroleum industry wastewater. This study intends to optimize the photocatalytic proxone process, utilizing a synthesized ZnO-Fe3O4 nanocatalyst, for petroleum wastewater treatment. The synthesis of ZnO-Fe3O4 was done by air oxidation and layer-by-layer self-assembly method and XRD, SEM, EDAX, FT-IR, BET, DRS, and VSM techniques were used to characterize the catalyst. Central composite design (CCD) method applied to investigated the effect of pH (4-8), reaction time (30-60 min), ozone gas concentration (1-2 mg/L-min), hydrogen peroxide concentration (2-3 mL/L) and the amount of catalyst (1-0.5 g/L) on the process. In the optimal conditions, biological oxygen demand (BOD5) and total petroleum hydrocarbon (TPH) removal, reaction kinetic, and synergistic effect mechanisms on the process were studied. Based on the ANOVA, a quadratic model with R2 = 0.99, P-Value = 0.0001, and F-Value = 906.87 was proposed to model the process. Based on the model pH = 5.7, ozone concentration = 1.8 mg/L-min, hydrogen peroxide concentration = 2.5 mL/L, reaction time = 56 min, and the catalyst dose = 0.7 g/L were proposed as the optimum condition. According to the model prediction, an efficiency of 85.3% was predicted for the removal of COD. To evaluate the accuracy of the prediction, an experiment was carried out in optimal conditions, and experimentally, a 52% removal efficiency was obtained. Also, at the optimum condition, BOD5 and TPH removal were 91.1% and 89.7% respectively. The reaction kinetic follows the pseudo-first-order kinetic model (R2 = 0.98). Also, the results showed that there is a synergistic effect in this process. As an advanced hybrid oxidation process, the photocatalytic proxone process has the capacity to treat petroleum wastewater to an acceptable standard.

Functional MOF-Based Materials for Environmental and Biomedical Applications: A Critical Review

Over the last ten years, there has been a growing interest in metal-organic frameworks (MOFs), which are a unique category of porous materials that combine organic and inorganic components. MOFs have garnered significant attention due to their highly favorable characteristics, such as environmentally friendly nature, enhanced surface area and pore volume, hierarchical arrangements, and adjustable properties, as well as their versatile applications in fields such as chemical engineering, materials science, and the environmental and biomedical sectors. This article centers on examining the advancements in using MOFs for environmental remediation purposes. Additionally, it discusses the latest developments in employing MOFs as potential tools for disease diagnosis and drug delivery across various ailments, including cancer, diabetes, neurological disorders, and ocular diseases. Firstly, a concise overview of MOF evolution and the synthetic techniques employed for creating MOFs are provided, presenting their advantages and limitations. Subsequently, the challenges, potential avenues, and perspectives for future advancements in the utilization of MOFs in the respective application domains are addressed. Lastly, a comprehensive comparison of the materials presently employed in these applications is conducted.

Mn anchored zeolite molecular nest for enhanced catalytic ozonation of cephalexin

The molecular nest structured catalysts have demonstrated better performance than the traditional supported catalysts. However, they have not been tried in antibiotics or other organic pollutants removal from water by advanced oxidation processes (AOPs). Here we synthesized Mn anchored zeolite molecular nest (Mn@ZN) for the catalytic ozonation of cephalexin (CLX), which is the widely used antibiotic and also a refractory pollutant in water. The ozonation catalyzed by Mn@ZN achieves 97% of CLX degradation in only 2 min and a reaction rate constant of 0.2454 L mg^-1·s^-1, which is 79.2 times higher than that of the non-catalytic ozonation. Even after ten cycles, the 0.46Mn@ZN/O₃ still achieves a CLX degradation efficiency higher than 88% in 2 min, presenting an excellent stability. Mn ions stabilized by the molecular nests facilitate Lewis acid sites and oxygen vacancies, providing active sites for O₃ sorption and decomposition into ·O^2- and ¹O₂ through electrons transfer for the radical reaction with CLX. DFT calculation indicates that both the oxygen vacancy formation energy and the O₃ adsorption energy of Mn@ZN are reduced by the Mn species introduction. This study finds a fascinating catalyst of Mn@ZN for the catalytic ozonation of antibiotics, and also a smart design strategy for zeolite confined metals catalysts for water treatment.

Performance of a Pilot-Scale Continuous Flow Ozone-Based Hospital Wastewater Treatment System

Antimicrobial resistance (AMR) is becoming a global concern. Recently, research has emerged to evaluate the human and environmental health implications of wastewater from medical facilities and to identify acceptable wastewater treatment methods. In this study, a disinfection wastewater treatment system using an ozone-based continuous flow system was installed in a general hospital located in Japan. The effectiveness of antimicrobial-resistant bacteria (ARB) and antimicrobials in mitigating the environmental impact of hospital wastewater was evaluated. Metagenomic analysis was conducted to characterize the microorganisms in the wastewater before and after treatment. The results demonstrated that ozone treatment enables effective inactivation of general gut bacteria, including Bacteroides, Prevotella, Escherichia coli, Klebsiella, DNA molecules, and ARGs, as well as antimicrobials. Azithromycin and doxycycline removal rates were >99% immediately after treatment, and levofloxacin and vancomycin removal rates remained between 90% and 97% for approximately one month. Clarithromycin was more readily removed than the other antimicrobials (81-91%), and no clear removal trend was observed for ampicillin. Our findings provide a better understanding of the environmental management of hospital wastewater and enhance the effectiveness of disinfection wastewater treatment systems at medical facilities for mitigating the discharge of pollutants into aquatic environments.

Solar-light-driven photocatalytic degradation of pharmaceutical pollutants utilizing 2D g-C3N4/BiOCl composite

Pharmaceuticals, which have been praised for protecting countless lives, have become a new category of environmental pollutants in recent decades as most of these pharmaceutical compounds are discovered in water bodies in concentrations ranging from ng/L to mg/L. Recently, metal-free g-C₃N₄ (GCN)-based composites have received considerable attention for the degradation of pharmaceutical compounds. In this study, GCN/BiOCl composite was prepared using a simple ultrasonication-assisted stirring method and characterized using various analytical and spectroscopic techniques including XRD, FTIR, PL, Elemental mapping, UV-DRS, FESEM, HRTEM, and TGA. The as-prepared composite was utilized to degrade levofloxacin (LVX) under solar light irradiation and showed excellent stability for the degradation of LVX. Furthermore, the universality of the GCN/BiOCl composite was investigated by degrading diverse pharmaceuticals such as ofloxacin (OFX), norfloxacin (NOX), ciprofloxacin (COX), and ketorolac tromethamine (KTC) in an aqueous phase. Therefore, this work provides an effective method to degrade pharmaceutical contaminants simultaneously in water using GCN/BiOCl composite.

Application, mechanism and prospects of Fe-based/ Fe-biochar catalysts in heterogenous ozonation process: A review

A growing number of novel organic contaminants have escalated the demands and challenges for water treatment technology. Advanced oxidation processes based on ozone have the advantage of strong oxidative capacity and higher efficiency, which have promising application prospects in the treatment of refractory organic contaminants. Biochar has attracted a lot of interest in recent years in wastewater treatment owing to its porous structure, portable preparation and outstanding stability. Moreover, iron species are widely used in catalytic ozonation owing to their magnetic polarization, vast abundance and low price. Despite a plethora of research on Fe-based catalysts in ozonation process, the heterogeneous catalytic ozonation with Fe-loaded biochar lacks a comprehensive compendium. This review intends to introduce the research progress on Fe-based catalysts and Fe-loaded biochar in heterogeneous catalytic ozonation progress, summarize and further explore the mechanisms and detection techniques of various active components in catalytic ozonation, as well as providing fresh insights for future research.

Chlorination disinfection by-products in Southeast Asia: A review on potential precursor, formation, toxicity assessment, and removal technologies

This review discusses disinfection by-products' (DBPs) potential precursors, formation, and toxicity, alongside available research on the treatment of DBPs in Southeast Asian countries' water sources. Although natural organic matter (NOM) in the form of humic and fulvic acids is the major precursor of DBPs formation, the presence of anthropogenic organic matter (AOM) also plays essential roles during disinfection using chlorine. NOM has been observed in water sources in Southeast Asian countries, with a relatively high concentration in peat-influenced water sources and a relatively low concentration in non-peat-influenced water sources. Similarly, AOMs, such as microplastics, pharmaceuticals, pesticides, and endocrine-disrupting chemicals (EDCs), have also been detected in water sources in Southeast Asian countries. Although studies regarding DBPs in Southeast Asian countries are available, they focus on regulated DBPs. Here, the formation potential of unregulated DBPs is also discussed. In addition, the toxicity associated with extreme DBPs' formation potential, as well as the effectiveness of treatments such as conventional coagulation, filtration, adsorption, and ozonation in reducing DBPs' formation potential in Southeast Asian sources of water, is also analyzed.

Synergistic effects of simultaneous coupling ozonation and biodegradation for coking wastewater treatment: Advances in COD removal, toxic elimination, and microbial regulation

Coking wastewater contains high concentrations of cyanide, phenols, pyridine, quinoline, and polycyclic aromatic hydrocarbons. Its high toxicity and low biodegradability leads to long hydraulic retention time of biological process and high cost of advanced oxidation process. In this study, the simultaneous combination of ozonation and biodegradation (SCOB) was proposed to treat coking wastewater. Through this process, ozonation breaks the refractory organics, and the biodegradable intermediates are rapidly mineralized by microorganisms protected by porous carriers. Thus, the performances of SCOB, individual biodegradation and ozonation systems were compared. The long-term stability of the SCOB system was evaluated, the contributions of ozonation and biodegradation were analyzed, and their synergistic mechanisms were elaborated. Results showed that biological activity was inhibited in the biodegradation system, and chemical oxygen demand (COD) removal was only 27.6% for the ozonation system. COD and total phenol removal of SCOB system reached 48.5% and 79.3%, respectively, and its kinetic degradation constant of COD was 55.6% higher than that of the ozonation system. Ozonation contributed to the oxidation of organics with unsaturated functional groups as well as soluble microbial products (SMPs), causing the effluent toxicity and chroma to decrease by 82.7% and 270 times, respectively. The higher abundances of microorganisms and functions were enriched in the core of carrier, which became dominant region for biodegradation. Consequently, COD removal of the SCOB system stabilized at >80% for real coking wastewater treatment, confirming its promising potential for the treatment of highly polluted industrial wastewater.

Advanced visual sensing techniques for on-site detection of pesticide residue in water environments

Pesticide usage has increased to fulfil agricultural demand. Pesticides such as organophosphorus pesticides (OPPs) are ubiquitous in world food production. Their widespread usage has unavoidable detrimental consequences for humans, wildlife, water, and soil environments. Hence, the development of more convenient and efficient pesticide residue (PR) detection methods is of paramount importance. Visual detecting approaches have acquired a lot of interest among different sensing systems due to inherent advantages in terms of simplicity, speed, sensitivity, and eco-friendliness. Furthermore, various detections have been proven to enable real-life PR surveillance in environment water. Fluorometric (FL), colourimetric (CL), and enzyme-inhibition (EI) techniques have emerged as viable options. These sensing technologies do not need complex operating processes or specialist equipment, and the simple colour change allows for visual monitoring of the sensing result. Visual sensing techniques for on-site detection of PR in water environments are discussed in this paper. This paper further reviews prior research on the integration of CL, FL, and EI-based techniques with nanoparticles (NPs), quantum dots (QDs), and metal-organic frameworks (MOFs). Smartphone detection technologies for PRs are also reviewed. Finally, conventional methods and nanoparticle (NPs) based strategies for the detection of PRs are compared.

Cellulose/inorganic nanoparticles-based nano-biocomposite for abatement of water and wastewater pollutants

Nanostructured materials offer a significant role in wastewater treatment with diminished capital and operational expense, low dose, and pollutant selectivity. Specifically, the nanocomposites of cellulose with inorganic nanoparticles (NPs) have drawn a prodigious interest because of the extraordinary cellulose properties, high specific surface area, and pollutant selectivity of NPs. Integrating inorganic NPs with cellulose biopolymers for wastewater treatment is a promising advantage for inorganic NPs, such as colloidal stability, agglomeration prevention, and easy isolation of magnetic material after use. This article presents a comprehensive overview of water treatment approaches following wastewater remediation by green and environmentally friendly cellulose/inorganic nanoparticles-based bio-nanocomposites. The functionalization of cellulose, functionalization mechanism, and engineered hybrid materials were thoroughly discussed. Moreover, we also highlighted the purification of wastewater through the composites of cellulose/inorganic nanoparticles via adsorption, photocatalytic and antibacterial approach.

Trends and characteristics of employing cavitation technology for water and wastewater treatment with a focus on hydrodynamic and ultrasonic cavitation over the past two decades: A Scientometric analysis

Cavitation-based technologies have emerged as a sustainable and effective way to treat natural waters and wastewater, considering their increasing scarcity due to pollution and climate change. For this reason, this work aimed to conduct a scientometric analysis on the topic of cavitation for water and wastewater treatment during the last 20 years, from 2001 to August 2022. We focused on hydrodynamic and ultrasonic cavitation as the prevalent methods of inducing cavitation. Furthermore, an in-depth study on the main trends regarding the number of publications and citations, keywords co-occurrence and evolution, and countries' publication trends was carried out to investigate the future direction of this research topic. The data was gathered from the Web of Science database and analyzed by the Visualization Of Similarities software. This work focused on: i) publication and citation trends, ii) scientific categories, iii) countries' contribution to the topic of cavitation, iv) prominent journals, v) keyword co-occurrence and cluster analysis, and vi) keyword evolution analysis. Results showed a significant increase in publications during the past 5 years. The scientific categories with the highest number of publications were "environmental sciences" and "environmental engineering," with a combined share of 19.4 % of publications. Keywords evolution analysis showed that limited focus was given to topics related to "energy" and "energy efficiency" in the field of cavitation, but with the rising importance of each process's sustainability, the attention given to these concepts will increase in the future. Future directions for the topic of cavitation-related water and wastewater treatments will shift towards more environmentally friendly applications of hydrodynamic and ultrasonic cavitation as well as towards more green and sustainable approaches to address the increasing water pollution problems and shortage. Moreover, it will include other uses besides water treatment such as manufacturing nanomaterials food production and medicine.

Study on the ozonation degradation of methylene blue enhanced by microchannel and ultrasound

Azo dye-containing wastewater poses serious risks of environmental pollution because it is generally biologically toxic and resistant to conventional wastewater treatment methods. A novel degradation system integrating ozone, microchannel, and ultrasound was designed to effectively degrade azo dye-contaminated wastewater. The effects of discharge voltage of dielectric barrier discharge (DBD) reactor, liquid flow rate, microchannel width, ultrasonic power, initial pH, and reaction temperature on methylene blue (MB) decolorization were studied. A maximum MB decolorization efficiency of 92.7% was obtained in the ozone/microchannel/ultrasound (O₃/MC/US) system with 14 min of treatment. In addition, the 14-min decolorization efficiency and TOC removal efficiency obtained in O₃/MC/US system were increased by 12.6 and 6.5%, respectively, compared to those obtained in the pure O₃ system. Based on the results of scavenging experiments, the combined effects of microchannel and ultrasound were proved to improve the contribution rate of hydroxyl radicals, thus improving the decolorization efficiency. The present work clearly illustrates that ozonation degradation can be effectively enhanced by microchannel and ultrasound, and also provides a feasible method for the treatment of organic wastewater.