Facile synthesis of Mn, Ce co-doped g-C3N4 composite for peroxymonosulfate activation towards organic contaminant degradation

Applying molecular oxygen for organic pollutant degradation: Strategies, mechanisms, and perspectives

Molecular oxygen (O2) is an environmentally friendly, cost-effective, and non-toxic oxidant. Activation of O2 generates various highly oxidative reactive oxygen species (ROS), which efficiently degrade pollutants with minimal environmental impact. Despite extensive research on the application of O2 activation in environmental remediation, a comprehensive review addressing this topic is currently lacking. This review provides an informative overview of recent advancements in O2 activation, focusing on three primary strategies: photocatalytic activation, chemical activation, and electrochemical activation of O2. We elucidate the respective mechanisms of these activation methods and discuss their advantages and disadvantages. Additionally, we thoroughly analyze the influence of oxygen supply, reactive temperature, and pH on the O2 activation process. From electron transfer and energy transfer perspectives, we explore the pathways for ROS generation during O2 activation. Finally, we address the challenges faced by researchers in this field and discuss future prospects for utilizing O2 activation in pollution control applications. This detailed analysis enhances our understanding and provides valuable insights for the practical implementation of organic pollutant degradation.

Activation of peroxymonosulfate by β-FeOOH@Cia-MoS2 for enhancing degradation of tetracycline: Significant roles of surface functional groups and Fe/Mo redox reactions

Vertically oriented interstitial atom carbon-anchored molybdenum disulfide (Cia-MoS2) nanospheres loaded with iron oxyhydroxide (β-FeOOH) were proposed for modulating the surface catalytic activity and stability of the unsaturated catalytic system. The β-FeOOH@Cia-MoS2 efficiently activated peroxymonosulfate (PMS) to degrade 95.4% of tetracycline (TC) within 30 min, owing to the more sulfur vacancies, higher surface hydroxyl density, redox ability and electronic transmission rate of β-FeOOH@Cia-MoS2. According to the characterization and analysis data, the multiple active sites (Fe, Mo and S sites) and oxygen-containing functional groups (CO, -OH) of β-FeOOH@Cia-MoS2 could promote the activation of PMS to form reactive oxygen species (ROS). The oxidation cycle of Fe(II)/Fe(III) and Mo(IV)/Mo(VI), the electron transfer mediator of rich sulfur vacancies, as well as oxygen-containing functional groups on the surface of β-FeOOH@Cia-MoS2 synergistically promoted the formation of ROS (1O2, FeIVO, SO4•- and •OH), among which 1O2 was the main active oxidant. In particular, the β-FeOOH@Cia-MoS2/PMS system could still degrade pollutants efficiently and stably after five recycling cycles. Furthermore, this system had a strong anti-interference ability in the actual water body. This study provided a promising strategy for the removal of difficult-to-degrade organic pollutants.

FeCo@hydrochar nanocomposites as efficient peroxymonosulfate activator for organic pollutant degradation

Sulfate radical-based advanced oxidation processes (SR-AOPs) are renowned for their exceptional capacity to degrade refractory organic pollutants due to their wide applicability, cost-effectiveness, and swift mineralization and oxidation rates. The primary sources of radicals in AOPs are persulfate (PS) and peroxymonosulfate (PMS) ions, sparking significant interest in their mechanistic and catalytic aspects. To develop a novel nanocatalyst for SR-AOPs, particularly for PMS activation, we synthesized carbon-coated FeCo nanoparticles (NPs) using solvothermal methods based on the polyol approach. Various synthesis conditions were investigated, and the NPs were thoroughly characterized regarding their structure, morphology, magnetic properties, and catalytic efficiency. The FeCo phase was primarily obtained at [OH-] / [Metal] = 26 and [Fe] / [Co] = 2 ratios. Moreover, as the [Fe]/[Co] ratio increased, the degree of xylose carbonization to form a carbon coating (hydrochar) on the NPs also increased. The NPs exhibited a spherical morphology with agglomerates of varying sizes. Vibrating-sample magnetometer analysis (VSM) indicated that a higher proportion of iron resulted in NPs with higher saturation magnetization (up to 167.8 emu g-1), attributed to a larger proportion of FeCo bcc phase in the nanocomposite. The best catalytic conditions for degrading 100 ppm Rhodamine B (RhB) included 0.05 g L-1 of NPs, 2 mM PMS, pH 7.0, and a 20-min reaction at 25 °C. Notably, singlet oxygen was the predominant specie formed in the experiments in the SR-AOP, followed by sulfate and hydroxyl radicals. The catalyst could be reused for up to five cycles, retaining over 98% RhB degradation, albeit with increased metal leaching. Even in the first use, dissolved Fe and Co concentrations were 0.8 ± 0.3 and 4.0 ± 0.5 mg L-1, respectively. The FeCo catalyst proved to be effective in dye degradation and offers the potential for further refinement to minimize Co2+ leaching.

Synthesis of 3D Sb2O3-based heterojunction reinforced by SPR effect and photo-Fenton mechanism for upgraded oxidation of metronidazole in water environments

The traditional homogenous and heterogenous Fenton reactions have frequently been restrained by the lower production of Fe2+ ions, which significantly obstructs the generation of hydroxyl radicals from the decomposition of H2O2. Thus, we introduce novel photo-Fenton-assisted plasmonic heterojunctions by immobilizing Fe3O4 and Bi nanoparticles onto 3D Sb2O3 via co-precipitation and solvothermal approaches. The ternary Sb2O3/Fe3O4/Bi composites offered boosted photo-Fenton behavior with a metronidazole (MNZ) oxidation efficiency of 92% within 60 min. Among all composites, the Sb2O3/Fe3O4/Bi-5% hybrid exhibited an optimum photo-Fenton MNZ reaction constant of 0.03682 min- 1, which is 5.03 and 2.39 times higher than pure Sb2O3 and Sb2O3/Fe3O4, respectively. The upgraded oxidation activity was connected to the complementary outcomes between the photo-Fenton behavior of Sb2O3/Fe3O4 and the plasmonic effect of Bi NPs. The regular assembly of Fe3O4 and Bi NPs enhances the surface area and stability of Sb2O3/Fe3O4/Bi. Moreover, the limited absorption spectra of Sb2O3 were extended into solar radiation by the Fe3+ defect of Fe3O4 NPs and the surface plasmon resonance (SPR) effect of Bi NPs. The photo-Fenton mechanism suggests that the co-existence of Fe3O4/Bi NPs acts as electron acceptor/donor, respectively, which reduces recombination losses, prolongs the lifetime of photocarriers, and produces more reactive species, stimulating the overall photo-Fenton reactions. On the other hand, the photo-Fenton activity of MNZ antibiotics was optimized under different experimental conditions, including catalyst loading, solution pH, initial MNZ concentrations, anions, and real water environments. Besides, the trapping outcomes verified the vital participation of •OH, h+, and •O2- in the MNZ destruction over Sb2O3/Fe3O4/Bi-5%. In summary, this work excites novel perspectives in developing boosted photosystems through integrating the photocatalysis power with both Fenton reactions and the SPR effects of plasmonic materials.

Transition metals-doped g-C3N4 nanostructures as advanced photocatalysts for energy and environmental applications

Graphitic carbon nitride (g-C3N4)-based heterostructured photocatalysts have received significant attention for its potential applications in the treatment of wastewater and hydrogen evolution. The utilization of semiconductor materials in heterogeneous photocatalysis has recently received great attention due to their potential and eco-friendly properties. Doping with metal ions plays a crucial role in altering the photochemical characteristics of g-C3N4, effectively enhancing photoabsorption into the visible range and thus improving the photocatalytic performance of doped photocatalysts. As an emerging nanomaterial, nanostructured g-C3N4 represents a visible light-active semiconducting photocatalyst that has attracted significant interest in the photocatalysis field, particularly for its practical water treatment applications. To the best of our knowledge, investigations of functionalized photocatalytic (PC) materials on 3d transition metal-doped g-C3N4 remain unexplored in the existing literature. g-C3N4 based heterohybrid photocatalysts have demonstrated excellent reusability, making them highly promising for wastewater treatment applications. This paper describes the overview of numerous studies conducted on the heterostructured g-C3N4 photocatalysts with various 3d metals. Research studies have revealed that the introduction of element doping with various 3d transition metals (e.g., Ti, Mn, Fe, Co, Ni, Cu, Zn, etc.) into g-C3N4 is an efficient approach to enhance degradation efficacy and boost photocatalytic activity (PCA) of doped g-C3N4 catalysts. Moreover, the significance of g-C3N4 heterostructured nanohybrids is highlighted, particularly in the context of wastewater treatment applications. The study concludes by providing insights into future perspectives in this developing area of research, with a specific focus on the degradation of various organic contaminants.

Effective degradation of phenol by activating PMS with bimetallic Mo and Ni Co-doped g C3N4 composite catalyst: A Fenton-like degradation process promoted by non-free radical 1O2

The application of bimetal supported graphite phase carbon nitride in activated peroxymonosulfate (PMS) process has become a research hotspot in recent years. In this study, 8-g C3N4/Mo/Ni composite catalyst material was successfully prepared by doping Mo and Ni in graphite phase carbon nitride. The bimetallic active sites were formed in the catalyst, and PMS was activated by the metal valence Mo6+/Mo4+ and Ni2+/Ni(0) through redox double cycle to effectively degrade phenol. When pH was neutral, the degradation rate of 20 mg/L phenol solution with 8-g C3N4/Mo/Ni (0.35 g/L) and PMS (0.6 mM) could reach 95% within 20 min. The degradation rate of 8-g C3N4/Mo/Ni/PMS catalytic system could reach more than 90% within 20min under the condition of pH range of 3-11 and different anions. Meanwhile, the degradation effects of RhB, MB and OFX on different pollutants within 30min were 99%, 100% and 82%, respectively. Electron spin resonance and quenching experiments showed that in 8-g C3N4/Mo/Ni/PMS system, the degradation mechanism was mainly non-free radicals, and the main active species in the degradation process was 1O2. This study provides a new idea for the study of bimetal supported graphite phase carbon nitride activation of PMS and the theoretical study of degradation mechanism.

Strategies for improving the stability of perovskite for photocatalysis: A review of recent progress

Photocatalysis is currently a hot research field, which provides promising processes to produce green energy sources and other useful products, thus eventually benefiting carbon emission reduction and leading to a low-carbon future. The development and application of stable and efficient photocatalytic materials is one of the main technical bottlenecks in the field of photocatalysis. Perovskite has excellent performance in the fields of photocatalytic hydrogen evolution reaction (HER), oxygen evolution reaction (OER), carbon dioxide reduction reaction (CO2RR), organic synthesis and pollutant degradation due to its unique structure, flexibility and resulting excellent photoelectric and catalytic properties. The stability problems caused by perovskite's susceptibility to environmental influences hinder its further application in the field of photocatalysis. Therefore, this paper innovatively summarizes and analyzes the existing methods and strategies to improve the stability of perovskite in the field of photocatalysis. Specifically, (i) component engineering, (ii) morphological control, (iii) hybridization and encapsulation are thought to improve the stability of perovskites while improving photocatalytic efficiency. Finally, the challenges and prospects of perovskite photocatalysts are discussed, which provides constructive thinking for the potential application of perovskite photocatalysts.

Insight into the selection of oxidant in persulfate activation system: The effect of the target pollutant properties

As a rising branch of advanced oxidation processes, persulfate activation has attracted growing attention. Unlike catalysts that have been widely studied, the selection of persulfate is previously overlooked. In this study, the affecting factors of persulfates were studied. The effect of target pollutant properties on superior persulfate species (the species with a higher degradation efficiency) was investigated by multiwalled carbon nanotube (MWCNT)/persulfate catalytic systems. Innovatively, the EHOMO (or vertical ionization potential (VIP)) value of the target pollutant was proposed to be an index to judge the superior persulfate species, and the threshold is VIP= 6.397-6.674 eV, EHOMO= -8.035∼- 7.810 eV, respectively. To be specific, when the VIP of phenolic compounds is higher (or EHOMO of phenolic compounds is lower) than the threshold, the catalytic performance of peroxymonosulfate would be higher than that of peroxydisulfate. Moreover, the effects of coexisting cations on peroxydisulfate superior species were further investigated. It was illustrated that the hydrated cation radius of coexisting cations would influence the pollutant degradation efficiency under some circumstances. This study provides a new approach to improve the cost of persulfate activation systems and promotes the underlying downstream application of persulfate activation systems.

Carbon nitride nanotubes anchored with Cu(I) triggers peracetic acid activation with visible light for removal of antibiotic contaminants: Probing mechanisms of non-radical pathways and identifying active sites

The peracetic acid (PAA)-activation process has attracted much attention in wastewater treatment. However, the low electron efficiency at the interface between heterogeneous catalysts and PAA has affected its practical application. For this study, we developed a carbon nitride hollow-nanotube catalysts with dispersed Cu(I) sites (Cu(I)-TCN) for the photocatalytic activation of PAA for antibiotics degradation. The obtained Cu(I)-TCN catalyst demonstrated an enhanced capacity for visible light harvesting along with increased charge transfer rates. Specifically, the developed Cu(I)-TCN/visible light/PAA system was able to completely remove antibiotics within 20 min, with a kinetic constant that was 25 times higher than a Cu(I)-TCN/visible light system, and 83 times higher than Cu(I)-TCN/PAA systems. Scavenging experiment and electron paramagnetic resonance (EPR) indicated that singlet oxygen was dominant reactive specie for sulfisoxazole (SIZ) removal. Besides, electrochemical tests and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy verified that the electron transfer efficiency of PAA activation was promoted due to the formation of inner-sphere interactions between PAA and Cu(I)-TCN, resulting in the quick removal of antibiotics. Further, after exposure to visible light, the Cu(I)-TCN excited photogenerated electrons which supplemented the electrons consumed in the reaction and drove the valence cycle of Cu ions. Overall, this research offered novel insights into the non-radical pathway for heterogeneous visible light-driven advanced oxidation processes and their potential for practical wastewater remediation.

Critical role of Photo-electrode with Ce-g-C3N4 in multi-stage microbial fuel cells cascade reactor treating diluted hyper-saline industrial wastewater rich in amines

Treatment of chemical industrial wastewater often faces problems of large volume occupation, high cost, and long processing time. In this study, low-content Ce-modified g-C₃N₄ was prepared and used as a catalyst on stainless steel mesh photo-cathode in constructing a multi-stage cascade microbial fuel cell system to reduce treatment costs in an energy-saving way. The large specific surface area (332.5 m² g^-1) and mesoporous structure of the material, is favorable for catalytic reactions, in which Ce elements were mainly present in single atoms. The characterized catalyst indicated a pronounced effect of Ce species in increasing photo-current and the synergistic pollutant removal, microbial bio-degradation and cascade operation stability. In Batch-mode (light illumination, aeration, total HRT (hydraulic residence time) of 54 h) treatment through three cascade reactors, removed 88% COD (Chemical Oxygen Demand). With 0.5 mM PMS (peroxymonosulfate), 94% COD and 86% NH₄⁺-N of the system were removed. The cascade net average COD removal capacity reached 16.04 kg per kg catalyst per day. The addition of PMS also enhanced the electricity generation. In continuous-mode, in totally 18 h treatment through the three-stages cascade reactors without PMS, overall, 83% COD and 78% TOC (Total Organic Carbon) were removed, reaching a net calculated system average COD removal capacity of 19.29 kg per kg catalyst per day. With Ce-g-C₃N₄ catalyst, the batch or continuous multi-stage cascade system demonstrated great technical flexibility and economic potential in treating high-strength, high-salinity amine-rich industrial wastewater.

Transition metal single atom-optimized g-C3N4 for the highly selective electrosynthesis of H2O2 under neutral electrolytes

Neutral electrosynthesis of H₂O₂via the 2e^- ORR is attractive for numerous applications, but the low activity and high cost of electrocatalysts have become important constraints. Therefore, the development of cheap and efficient electrocatalysts for the 2e^- ORR is necessary. Herein, we report the embedding of transition metal single atoms (TM SAs) in g-C₃N₄ nanosheets (CNNS). The introduction of TM SAs increases the N-CN content and reduces the C-C/CC content in CNNS, which contributes to the increased selectivity of TM SA/CNNS for the 2e^- ORR. TM SA is the main reason for the enhanced activity of the 2e^- ORR. Based on the results obtained by replacing a series of TM SA, the Ni_0.10 SA/CNNS with optimal N-CN content exhibited the best selectivity (∼98%) and highest yield of H₂O₂ (∼503 mmol g_cat^-1 h^-1), which is ∼14.6 times higher than that of CNNS (∼34.4 mmol g_cat^-1 h^-1). Other TM SA/CNNS also exhibited high activity and selectivity. This study demonstrates the ability of TM SA to modulate the selectivity and activity of CNNS, making it a promising candidate for the 2e^- ORR and providing more reference ideas for the preparation of H₂O₂.

Metal-carbon hybrid materials induced persulfate activation: Application, mechanism, and tunable reaction pathways

Proper wastewater treatment has always been the focus of human society, and many researchers have been working to find efficient and stable wastewater treatment technologies. Persulfate-based advanced oxidation processes (PS-AOPs) mainly rely on persulfate activation to form reactive species for pollutants degradation and are considered to be one of the most effective wastewater treatment technologies. Recently, metal-carbon hybrid materials have been diffusely used for PS activation because of their high stability, abundant active sites, and easy applicability. Metal-carbon hybrid materials can successfully overcome the shortcomings of onefold metal catalysts and carbon catalysts by combing the complementary advantages of the two components. This article reviews recent studies about metal-carbon hybrid materials-mediated PS-AOPs for wastewater decontamination. The interactions of metal and carbon materials, as well as the active sites of metal-carbon hybrid materials, are introduced first. Then, the application and mechanism of metal-carbon hybrid materials-mediated PS activation are presented in detail. Lastly, the modulation methods of metal-carbon hybrid materials and their tunable reaction pathways were discussed. The prospect of future development directions and challenges is proposed to facilitate metal-carbon hybrid materials-mediated PS-AOPs to take a step further for practical application.

Light and nitrogen vacancy-intensified nonradical oxidation of organic contaminant with Mn (III) doped carbon nitride in peroxymonosulfate activation

Recently, Mn-based materials have a great potential for selective removal of organic contaminants with the assistance of oxidants (PMS, H₂O₂) and the direct oxidation. However, the rapid oxidation of organic pollutants by Mn-based materials in PMS activation still presents a challenge due to the lower conversion of surface Mn (III)/Mn (IV) and higher reactive energy barrier for reactive intermediates. Here, we constructed Mn (III) and nitrogen vacancies (Nv) modified graphite carbon nitride (MNCN) to break these aforementioned limitations. Through analysis of in-situ spectra and various experiments, a novel mechanism of light-assistance non-radical reaction is clearly elucidated in MNCN/PMS-Light system. Adequate results indicate that Mn (III) only provide a few electrons to decompose Mn (III)-PMS* complex under light irradiation. Thus, the lacking electrons necessarily are supplied from BPA, resulting in its greater removal, then the decomposition of the Mn (III)-PMS* complex and light synergism form the surface Mn (IV) species. Above Mn-PMS complex and surface Mn (IV) species lead to the BPA oxidation in MNCN/PMS-Light system without the involvement of sulfate (SO₄^{• ̶}) and hydroxyl radicals (•OH). The study provides a new understanding for accelerating non-radical reaction in light/PMS system for the selective removal of contaminant.

Novel Bi2WO6/ZnSnO3 heterojunction for the ultrasonic-vibration-driven piezocatalytic degradation of RhB

This study designed and prepared a new piezoelectric catalytic nanomaterial, Bi₂WO₆/ZnSnO₃, and applied it in piezocatalytic water purification. Results indicated that the composite had superior piezocatalytic efficiency and stability in rhodamine B (RhB) degradation under ultrasonic vibration. The Bi₂WO₆/ZnSnO₃ sample with 10% Bi₂WO₆ had the optimum activity with a degradation rate of 2.15 h^-1, which was 7.4 and 11.3 times that of ZnSnO₃ and Bi₂WO₆, respectively. Various characterizations were conducted to study the morphology, structure, and piezoelectric properties of the Bi₂WO₆/ZnSnO₃ composites and reveal the reasons for their improved piezocatalytic performance. Results showed that ZnSnO₃ cubes were dispersed throughout the surface of Bi₂WO₆ nanosheets, which enhanced the specific surface area and facilitated the piezocatalytic reaction. Additionally, type-II heterojunction structures formed at the contact interface of Bi₂WO₆ and ZnSnO₃, driving the migration of piezoelectric-induced electrons and holes. Accordingly, the separation efficiency of charge carriers improved, and the piezoelectric catalytic activity was significantly enhanced. This study may provide a potential composite catalyst and a promising idea for the design of highly efficient piezoelectric catalyst.

Peroxydisulfate activation by sulfur-doped ordered mesoporous carbon: Insight into the intrinsic relationship between defects and 1O2 generation

The carbon-catalyzed persulfate-based advanced oxidation process (PS-AOP) has recently received much focus owing to the green, economical, and sustainable nature of carbon catalysts. In this study, sulfur-doped ordered mesoporous carbons (S-OMCs) were utilized to activate peroxydisulfate (PDS) for ciprofloxacin (CIP) removal. A synthesis temperature gradient was set to regulate the defect level of S-OMCs, since the thermal decomposition of oxygen- and sulfur-containing groups at different temperatures could release S and O and then create defects. In all S-OMCs/PDS systems, ¹O₂ dominated CIP degradation. Interestingly, a high linear correlation (R² = 0.9091) between defect level and ¹O₂ yield was found, confirming the structure-activity relationship between defects and ¹O₂ generation. Moreover, the impacts of several important reaction conditions and water matrix on S-OMC-1000/PDS activation system were surveyed. In the S-OMC-1000/PDS activation system, CIP removal could attain 85.84% under the condition of unadjusted pH (pH = 5.3) and small amount of S-OMC-1000 (50 mg/L). The S-OMC-1000/PDS activation system also exhibited relatively stable or even better performance in the presence of common inorganic anions and natural organic matter (NOM), manifesting its good potential for practical applications. In addition, the reusability of S-OMC-1000 was investigated. This study provides a practical and high-efficiency way for decontaminating antibiotic-polluted water, and gives an alternative approach for identifying the active site of catalysts.

Co-Doped, Tri-Doped, and Rare-Earth-Doped g-C3N4 for Photocatalytic Applications: State-of-the-Art

Rapid industrialization and overpopulation have led to energy shortages and environmental pollution, accelerating research to solve the issues. Currently, metal-free photocatalysts have gained the intensive attention of scientists due to their environmental-friendly nature and ease of preparation. It was noticed that g-C3N4 (GCN) consists of a few outstanding properties that could be used for various applications such as water treatment and clean energy production. Nonetheless, bare GCN contains several drawbacks such as high charge recombination, limited surface area, and low light sensitivity. Several solutions have been applied to overcome GCN limitations. Co-doping, tri-doping, and rare-earth-doping can be effective solutions to modify the GCN structure and improve its performance toward photocatalysis. This review highlights the function of multi-elemental and rare-earth dopants in GCN structure, mechanisms, and performance for photocatalytic applications as well as the advantages of co-doping, tri-doping, and rare-earth-doping of GCN. This review summarizes the different roles of dopants in addressing the limitations of GCN. Therefore, this article critically reviewed how multi-elemental and rare-earth-doping affect GCN properties and enhanced photoactivity for various applications.