Architecting of an aptasensor for the staphylococcus aureus analysis by modification of the screen-printed carbon electrode with aptamer/Ag-Cs-Gr QDs/NTiO2

Disposable electrochemical biosensors for the detection of bacteria in the light of antimicrobial resistance

Persistent and inappropriate use of antibiotics is causing rife antimicrobial resistance (AMR) worldwide. Common bacterial infections are thus becoming increasingly difficult to treat without the use of last resort antibiotics. This has necessitated a situation where it is imperative to confirm the infection to be bacterial, before treating it with antimicrobial speculatively. Conventional methods of bacteria detection are either culture based which take anywhere between 24 and 96 hor require sophisticated molecular analysis equipment with libraries and trained operators. These are difficult propositions for resource limited community healthcare setups of developing or less developed countries. Customized, inexpensive, point-of-care (PoC) biosensors are thus being researched and developed for rapid detection of bacterial pathogens. The development and optimization of disposable sensor substrates is the first and crucial step in development of such PoC systems. The substrates should facilitate easy charge transfer, a high surface to volume ratio, be tailorable by the various bio-conjugation chemistries, preserve the integrity of the biorecognition element, yet be inexpensive. Such sensor substrates thus need to be thoroughly investigated. Further, if such systems were made disposable, they would attain immunity to biofouling. This article discusses a few potential disposable electrochemical sensor substrates deployed for detection of bacteria for environmental and healthcare applications. The technologies have significant potential in helping reduce bacterial infections and checking AMR. This could help save lives of people succumbing to bacterial infections, as well as improve the overall quality of lives of people in low- and middle-income countries.

Review of Detection Limits for Various Techniques for Bacterial Detection in Food Samples

Foodborne illnesses can be infectious and dangerous, and most of them are caused by bacteria. Some common food-related bacteria species exist widely in nature and pose a serious threat to both humans and animals; they can cause poisoning, diseases, disabilities and even death. Rapid, reliable and cost-effective methods for bacterial detection are of paramount importance in food safety and environmental monitoring. Polymerase chain reaction (PCR), lateral flow immunochromatographic assay (LFIA) and electrochemical methods have been widely used in food safety and environmental monitoring. In this paper, the recent developments (2013-2023) covering PCR, LFIA and electrochemical methods for various bacterial species (Salmonella, Listeria, Campylobacter, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli)), considering different food sample types, analytical performances and the reported limit of detection (LOD), are discussed. It was found that the bacteria species and food sample type contributed significantly to the analytical performance and LOD. Detection via LFIA has a higher average LOD (24 CFU/mL) than detection via electrochemical methods (12 CFU/mL) and PCR (6 CFU/mL). Salmonella and E. coli in the Pseudomonadota domain usually have low LODs. LODs are usually lower for detection in fish and eggs. Gold and iron nanoparticles were the most studied in the reported articles for LFIA, and average LODs were 26 CFU/mL and 12 CFU/mL, respectively. The electrochemical method revealed that the average LOD was highest for cyclic voltammetry (CV) at 18 CFU/mL, followed by electrochemical impedance spectroscopy (EIS) at 12 CFU/mL and differential pulse voltammetry (DPV) at 8 CFU/mL. LOD usually decreases when the sample number increases until it remains unchanged. Exponential relations (R2 > 0.95) between LODs of Listeria in milk via LFIA and via the electrochemical method with sample numbers have been obtained. Finally, the review discusses challenges and future perspectives (including the role of nanomaterials/advanced materials) to improve analytical performance for bacterial detection.

Rapid Cryptococcus electroporated-lysis and sensitive detection on a miniaturized platform

Fast and accurate detection of Cryptococcus and precise differentiation of its subtypes is of great significance in protecting people from cryptococcal disease and preventing its spread in populations. However, traditional Cryptococcus identification and detection techniques still face significant challenges in achieving high analysis speed as well as high sensitivity. In this work, we report an electric microfluidic biochip. Compared to conventional methods that take several hours or even a day, this chip can detect Cryptococcus within 20 min, and achieve its maximum detection limit within 1 h, with the ability to differentiate between the Cryptococcus neoformans (NEO) and rare Cryptococcus gattii (GAT) efficiently, which accounts for nearly 100%. This device integrated two functional zones of an electroporation lysis (EL) zone for rapid cell lysis (<30 s) and an electrochemical detection (ED) zone for sensitive analysis of the released nucleic acids. The EL zone adopted a design of microelectrode arrays, which obtains a large electric field intensity at the constriction of the microchannel, addressing the safety concerns associated with high-voltage lysis. The device enables a limit of detection (LOD) of 60 pg/mL for NEO and 100 pg/mL for GAT through the modification of nanocomposites and specific probes. In terms of the detection time and sensitivity, the integrated microfluidic biochip demonstrates broad potential in Cryptococcus diagnosis and disease prevention.

Recent advances in electrochemical aptasensors and genosensors for the detection of pathogens

In recent years, pathogenic microorganisms have caused significant mortality rates and antibiotic resistance and triggered exorbitant healthcare costs. These pathogens often have high transmission rates within human populations. Rapid diagnosis is crucial in controlling and reducing the spread of pathogenic infections. The diagnostic methods currently used against individuals infected with these pathogens include relying on outward symptoms, immunological-based and, some biomolecular ones, which mainly have limitations such as diagnostic errors, time-consuming processes, and high-cost platforms. Electrochemical aptasensors and genosensors have emerged as promising diagnostic tools for rapid, accurate, and cost-effective pathogen detection. These bio-electrochemical platforms have been optimized for diagnostic purposes by incorporating advanced materials (mainly nanomaterials), biomolecular technologies, and innovative designs. This review classifies electrochemical aptasensors and genosensors developed between 2021 and 2023 based on their use of different nanomaterials, such as gold-based, carbon-based, and others that employed other innovative assemblies without the use of nanomaterials. Inspecting the diagnostic features of various sensing platforms against pathogenic analytes can identify research gaps and open new avenues for exploration.

Rapid Detection and Identification of Vancomycin-Sensitive Bacteria Using an Electrochemical Apta-Sensor

In order to combat the complex and diverse infections caused by bacteria, it is essential to develop efficient diagnostic tools. Current techniques for bacterial detection rely on laborious multistep procedures, with high costs and extended time of analysis. To overcome these limitations, we propose here a novel portable electrochemical biosensor for the rapid detection and identification of Gram-positive bacteria that leverages the recognition capabilities of vancomycin and aptamers. A vancomycin-modified screen-printed carbon electrode was used to selectively capture Gram-positive bacteria susceptible to this antibiotic. Electrochemical impedance spectroscopy and scanning electron microscopy demonstrated that capture was achieved in 10 min, with a limit of detection of only 2 CFU/mL. We then tested the device's potential for aptamer-based bacterial identification using Staphylococcus aureus and Bacillus cereus as the test strains. Specifically, electrodes with captured bacteria were exposed to species-specific aptamers, and the resulting changes in current intensity were analyzed using differential pulse voltammetry. When used directly in untreated milk or serum, the system was able to successfully identify a small amount of S. aureus and B. cereus (100 CFU/mL) in less than 45 min. This novel biosensor has the potential to serve as an invaluable tool that could be used, even by inexperienced staff, in a broad range of settings including clinical diagnostics, food safety analysis, environmental monitoring, and security applications.

A Critical Review on Detection of Foodborne Pathogens Using Electrochemical Biosensors

An outbreak of foodborne pathogens would cause severe consequences. Detecting and diagnosing foodborne diseases is crucial for food safety, and it is increasingly important to develop fast, sensitive, and cost-effective methods for detecting foodborne pathogens. In contrast to traditional methods, such as medium-based culture, nucleic acid amplification test, and enzyme-linked immunosorbent assay, electrochemical biosensors possess the advantages of simplicity, rapidity, high sensitivity, miniaturization, and low cost, making them ideal for developing pathogen-sensing devices. The biorecognition layer, consisting of recognition elements, such as aptamers, antibodies and bacteriophages, and other biomolecules or polymers, is the most critical component to determine the selectivity, specificity, reproducibility, and lifetime of a biosensor when detecting pathogens in a biosample. Furthermore, nanomaterials have been frequently used to improve electrochemical biosensors for sensitively detecting foodborne pathogens due to their high conductivity, surface-to-volume ratio, and electrocatalytic activity. In this review, we survey the characteristics of biorecognition elements and nanomaterials in constructing electrochemical biosensors applicable for detecting foodborne pathogens during the past five years. As well as the challenges and opportunities of electrochemical biosensors in the application of foodborne pathogen detection are discussed.

Photocatalytic degradation of chlorpyrifos using Ag nanoparticles-doped g-C3N5 decorated with dendritic CdS

In this work, g-C3N5/CdS dendrite/AgNPs nanocomposite was synthesized using a mixed method consisting of hydrothermal, ultrasonic and chemistry reduction with sodium borohydride. The characterization of the as-prepared nanocomposite was done using infrared spectroscopy, X-ray, scanning electron microscopy, transmission electron microscopy, BET, and DRS methods was performed. The DRS results showed that the g-C3N5/CdS dendrite/AgNPs nanocomposite nanocomposite has a band gap of 1.08 eV. This band gap indicates the good capability of this nanocomposite as a photocatalyst. Accordingly, the photocatalytic degradation of chlorpyrifos (CPS) in was performed in an aqueous solution of the synthesized nanocomposite. The results showed that almost 95.3% of this poison, a concentration of 50 mg L-1 was degraded in the presence of 0.05 g L-1 of nanocomposite at pH = 5 in a 60 min. Hydroxide radicals and holes play a significant role in the photocatalytic process. The reusability of the nanocomposite with excellent performance in the degradation of photocatalytic toxins caused by the reduction in the electron-hole recombination and the high surface area of the nanocomposite are among the unique features of this work.

Carbon dots and their interactions with recognition molecules for enhanced nucleic acid detection

Carbon Dots (C-dots) have exceptional fluorescence and incident wavelength alteration capabilities because of their π-π* electron transitions between the surface-trapped charges. They have clear, considerate and cost-effective applications in the domain of bio-sensing, optical imaging, medical diagnostics, fluorescence chemotherapy, forensics, and environmentology. Advances in the production process of C-dots can change their optical and chemical characteristics, allowing them to interact with a variety of chemicals and ions that can be exploited for the DNA detection in point-of-care devices. In the current scenario of pathogenic disease prevention, metagenomics and industrial processes, alternative genetic material identification is critical. This review focuses on the existing carbon dots-based DNA detection technologies and their interactions with other components such as metallic salts, dyes, and biological chemicals based on their surface charge distribution (positive or negative) employed in the DNA diagnostic devices and biosensors with their operating mechanism regarding their target component. These intriguing scientific discoveries and technologies will be extensively examined to translate them into real-world solutions which will have a significant societal and economic impact on overall well-being and innovation.

An electrochemical aptasensor for detection of carbofuran using gold nanoparticles decorated hierarchical porous carbon as an effective sensing platform

In this study, a novel electrochemical aptasensor for carbofuran (CBF) detection is prepared by gold nanoparticles decorated hierarchical porous carbon (Au@HPC). The prepared carbon materials show a three-dimensional hierarchical structure with a large specific surface area and a highly developed porous structure. Aptamers loading significantly improves when gold nanoparticles are embedded into the hierarchical porous carbon skeleton. Besides, Au@HPC modified electrode exhibits a large electroactive area and excellent electrochemical conductivity, serving as a promising platform for highly sensitive and selective electrochemical detection of CBF. The developed CBF electrochemical aptasensor shows a wide linear from 1.0 to 100000 pg/L with a detection limit of 0.5 pg/L, demonstrating an extraordinary sensitivity compared to other sensors for CBF detection. Additionally, the designed aptasensor was used to monitor the CBF in vegetable samples, with a recovery range from 98.4% to 104.8%. The results coincide with the standard test method, revealing its practicability in the food safety analysis.

A signal-off aptasensor for the determination of Acinetobacter baumannii by using methylene blue as an electrochemical probe

An electrochemical aptasensor has been developed to detect Acinetobacter baumannii (A. baumannii). The proposed system was developed by modifying carbon screen-printed electrodes (CSPEs) with a synthesized MWCNT@Fe₃O₄@SiO₂-Cl nanocomposite and then binding A. baumannii-specific aptamer using covalent immobilization on the modified electrode surface and the interaction of methylene blue (MB) with Apt as an electrochemical redox indicator. As a result of the incubation of the A. baumannii bacteria as a target on the proposed aptasensor, a cathodic peak current density (J_pc) of MB decreased due to the formation of the Apt-A. baumannii complex and MB being released from the immobilized Apt on the surface of the modified electrode. In addition to increasing the electron transfer kinetics, the nanocomposite provides a relatively stable matrix to improve the loading Apt sequence. The suggested aptasensor was demonstrated to be capable of detecting A. baumannii with a linear range of 10.0-1.0 × 10⁷ colony-forming unit (CFU) mL^-1 and a detection limit of 1 CFU mL^-1 (S/N = 3) using differential pulse voltammetry (DPV) studies at a working potential of ~0.29 V and a scan rate of 100 mV s^-1. The outcomes revealed that the aptasensor exhibited high A. baumannii detection sensitivity, stability, reproducibility, and specificity.

Dual recognition elements for selective determination of progesterone based on molecularly imprinted electrochemical aptasensor

A novel molecularly imprinted electrochemical aptasensor (MIEAS) was constructed for selective progesterone (P4) detection based on SnO₂-graphene (SnO₂-Gr) nanomaterial and gold nanoparticles (AuNPs). SnO₂-Gr with a large specific area and excellent conductivity improved the adsorption capacity of P4. Aptamer, as biocompatible monomer, was captured by AuNPs on modified electrode through Au-S bond. An electropolymerized molecularly imprinted polymer (MIP) film consisted of p-aminothiophenol as chemical functional monomer and P4 as template molecule. Due to the synergetic effect of MIP and aptamer towards P4, this MIEAS exhibited better selectivity than the sensor with MIP or aptamer as single recognition element. The prepared sensor had a low detection limit of 1.73 × 10^-15 M in a wide linear range from 10^-14 M to 10^-5 M. Satisfactory recovery obtained in tap water and milk samples proved that this sensor had great potential in environmental and food analysis.

Staphylococcus aureus - Review on potential targets for sensors development

Staphylococcus aureus (S. aureus) is accountable for a wide variety of clinical disease with a high rate of morbidity and mortality around the globe. It has a leading place into the ESKAPE group that includes six pathogens and exhibit multidrug resistance and are the major cause of healthcare associated infections: Enterococcus faecium, S. aureus, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, and Enterobacter spp. A critical overview regarding the development of sensors for both S. aureus and his, more dangerous alter ego, Methicillin-resistant S. aureus (MRSA) was presented focusing on the bacteria targets starting with the detection of the whole cell, up to specific wall components, toxins or other virulence factors. The literature data was systematically assessed having in sight the design of the sensing platforms, the analytical performances, and possible courses of action to be implemented in real practice as point-of-care (POC) devices. Moreover, a distinct section was dedicated to commercially available devices and out of the box approaches, namely the use of bacteriophages as an alternative to antimicrobial therapy and as sensors modifiers. The reviewed sensors and devices were discussed in terms of their suitability for different biosensing applications, in early screening of contamination regarding food analysis, environmental monitoring and in clinical diagnosis.

Sandwich-Type Electrochemical Aptasensor for Highly Sensitive and Selective Detection of Pseudomonas Aeruginosa Bacteria Using a Dual Signal Amplification Strategy

An electrochemical aptasensor developed to realize the detection of Pseudomonas aeruginosa (P. aeruginosa) bacteria based on a signal amplification strategy. The carbon screen-printed electrode (CSPE) surface was modified by MIL-101(Cr)/Multi-walled carbon nanotubes (MWCNT), which significantly increased the effective surface area of the electrode, thus resulting in further F23 aptamer immobilization at the surface of the modified electrode. As a result, the P. aeruginosa can be efficiently captured onto the surface of the aptasensor. Moreover, aptamer immobilized on the two-dimensional graphitic carbon nitride complex with silver nanoparticles (AgNPs/c-g-C₃N₄/Apt) was used as an electrochemical signal label, connected to P. aeruginosa bacteria at the modified electrode. This strategy increased the aptamer surface density and the sensitivity for detecting P. aeruginosa. Also, the resultant material was thoroughly characterized using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis techniques. A highly sensitive voltammetric aptasensor for P. aeruginosa detection was obtained via this strategy at the limit of detection of 1 Colony-forming unit (CFU)/mL (σ = 3). Therefore, this proposed strategy with dual signal amplification can be a promising platform for simple, practical, reliable, and sensitive method for P. aeruginosa.

Biomedical applications of aptamer-modified chitosan nanomaterials: An updated review

Among polysaccharides of environmental and economic interest, chitosan (CS) is receiving much attention, particularly in the food and biotechnology industries to encapsulate active food ingredients and immobilize enzymes. CS nanoparticles (CS NPs) combine the intrinsic beneficial properties of both natural polymers and nanoscale particles such as quantum size effect, biocompatibility, biodegradability, and ease of modification, and have great potential for bioimaging, drug delivery, and biosensing applications. Aptamers are single-stranded oligonucleotides that can fold into predetermined structures and bind to the corresponding biomolecules. They are mainly used as targeting ligands in biosensors, disease diagnostic kits and treatment strategies. They can deliver contrast agents and drugs into cancer cells and tissues, control microorganism growth and precisely target pathogens. Aptamer-conjugated CS NPs can significantly improve the efficacy of conventional therapies, minimize their side effects on normal tissues, and overcome the enhanced permeability retention (EPR) effect. Further, aptamer-conjugated carbohydrate-based nanobiopolymers have shown excellent antibacterial and antiviral properties and can be used to develop novel biosensors for the efficient detection of antibiotics, toxins, and other biomolecules. This updated review aims to provide a comprehensive overview of the bioapplications of aptamer-conjugated CS NPs used as innovative diagnostic and therapeutic platforms, their limitations, and potential future directions.

Applicability of a Green Nanocomposite Consisted of Spongin Decorated Cu2WO4(OH)2 and AgNPs as a High-Performance Aptasensing Platform in Staphylococcus aureus Detection

This study reports the synthesis of a nanocomposite consisting of spongin and its applicability in the development of an aptasensing platform with high performance. The spongin was carefully extracted from a marine sponge and decorated with copper tungsten oxide hydroxide. The resulting spongin-copper tungsten oxide hydroxide was functionalized by silver nanoparticles and utilized in electrochemical aptasensor fabrication. The nanocomposite covered on a glassy carbon electrode surface amplified the electron transfer and increased active electrochemical sites. The aptasensor was fabricated by loading of thiolated aptamer on the embedded surface via thiol-AgNPs linkage. The applicability of the aptasensor was tested in detecting the Staphylococcus aureus bacterium as one of the five most common causes of nosocomial infectious diseases. The aptasensor measured S. aureus under a linear concentration range of 10-10⁸ colony-forming units per milliliter and a limit of quantification and detection of 12 and 1 colony-forming unit per milliliter, respectively. The highly selective diagnosis of S. aureus in the presence of some common bacterial strains was satisfactorily evaluated. The acceptable results of the human serum analysis as the real sample may be promising in the bacteria tracking in clinical samples underlying the green chemistry principle.

DNA aptamers selection for Staphylococcus aureus cells by SELEX and Cell-SELEX

BACKGROUND

Staphylococcus aureus is the most common bacteria found in skin, soft tissues, bone, and bone prostheses infections. The aim of this study was to select DNA aptamers for S. aureus to be applied in the diagnosis of bacteria.

METHODS AND RESULTS

We used SELEX (Systematic Evolution of Ligands by EXponencial Enrichment) for peptidoglycan followed by cell-SELEX with S. aureus cells as target. Four sequences showed significantly higher binding to S. aureus distinguishing it from the control cells of other significant microbial species: Escherichia coli, Candida albicans, Streptococcus pyogenes and Streptococcus pneumoniae. In particular, ApSA1 (Kd = 62.7 ± 5.6 nM) and ApSA3 (Kd = 43.3 ± 3.0 nM) sequences combined high affinity and specificity for S. aureus, considering all microorganisms tested.

CONCLUSIONS

Our results demonstrated that these aptamers were able to identify peptidoglycan in the S. aureus surface and have great potential for use in the development of radiopharmaceuticals capable to identify S. aureus infectious foci, as well as in other aptamer-based methodologies for bacteria diagnosis.

A Label-Free Electrochemical Aptasensor Based on Zn/Fe Bimetallic MOF Derived Nanoporous Carbon for Ultra-Sensitive and Selective Determination of Paraquat in Vegetables

Paraquat (PQ) has high acute toxicity, even at low concentrations. For most people, the main pathway of exposure to PQ is through the diet. Therefore, the development of simple and efficient methods for PQ testing is critical for ensuring food safety. In this study, a new electrochemical detection strategy for paraquat is proposed based on the specific binding of PQ to its nucleic acid aptamer. Firstly, the Zn/Fe bimetallic ZIF derived nanoporous carbon (Zn/Fe-ZIF-NPC) and nickel hexacyanoferrate nanoparticles (NiHCF-NPs) were sequentially modified onto the glassy carbon electrode (GCE). NiHCF-NPs served as the signal probes, while Zn/Fe-ZIF-NPC facilitated electron transfer and effectively enhanced the sensing signal of NiHCF-NPs. Au nanoparticles (AuNPs) were then electrodeposited on the NiHCF-NPs/Zn/Fe-ZIF-NPC/GCE and then the thiolated aptamer was assembled on the AuNPs/NiHCF-NPs/Zn/Fe-ZIF-NPC/GCE via Au-S bonding. When incubated with PQ, the formation of PQ–aptamer complexes delayed the interfacial electron transport reaction of NiHCF-NPs, which caused a decrease in the current signals. As a result, simple and highly sensitive detection of PQ can be readily achieved by detecting the signal changes. A linear range was obtained from 0.001 to 100 mg/L with a detection limit as low as 0.34 μg/L. Due to the recognition specificity of the aptamer to its target molecule, the proposed method has excellent anti-interference ability. The prepared electrochemical aptasensor was successfully used for PQ assay in lettuce, cabbage and agriculture irrigation water samples with recoveries ranging from 96.20% to 104.02%, demonstrating the validity and practicality of the proposed method for PQ detection in real samples.

Fabrication of avidin-stabilized gold nanoclusters with dual emissions and their application in biosensing

Protein-stabilized gold nanoclusters (Prot-Au NCs) have been widely used in biosensing and cell imaging owing to their excellent optical properties and low biotoxicity. However, several Prot-Au NCs reported in the literature do not retain the biological role of the protein, which greatly limits their ability to directly detect biomarkers. This study demonstrated for the first time the successful synthesis of dual-function avidin-stabilized gold nanoclusters (Av–Au NCs) using a one-pot method. The resulting Av–Au NCs exhibited intense blue and red emissions under 374 nm excitation. Furthermore, the Av–Au NCs retained the native functionality of avidin to bind to biotin. When DNA strands modified with biotin at both ends (i.e., linker chains) were mixed with Av–Au NCs, large polymers were formed, indicating that Av–Au NCs could achieve fluorescence signal amplification by interacting with biotin. Taking advantage of the aforementioned properties, we constructed a novel enzyme-free fluorescent biosensor based on the Av–Au NCs-biotin system to detect DNA. The designed fluorescent biosensor could detect target DNA down to 0.043 nM, with a wide line range from 0.2 nM to 20 µM. Thus, these dual-functional Av–Au NCs were shown to be an excellent fluorescent material for biosensing.

Avidin-stabilized gold nanoclusters (Av–Au NCs) were synthesized for the first time by a water-bath method.

The synthesized Av–Au NCs not only exhibited intense blue and red emissions under 374 nm excitation, but also retained the native functionality of avidin to bind to biotin.

The fluorescent signal amplification system constructed by the interaction of Av–Au NCs with biotin was successfully applied to detect target DNA in vitro.

Fabrication of a sensitive sensor for electrochemical detection of diltiazem in presence of methyldopa

Diltiazem (DTZ) is one of the most important drugs in blood pressure that is used to treat cardiovascular diseases. With this overuse of this drug and its use for suicide, swelling and neck cramps and fever has made it important to measure it. So, this paper will give an account of modification of carbon paste electrode with the ternary-nanocomposite including reduced-graphene oxide (rGO), cadmium oxide and 1-ethyl 3- methyl imidazole chloride as ionic liquid for using the determination of DTZ in blood serum samples. Characterization of the synthesized rGO, cadmium oxide, and modified electrodes and their electrochemical performance were studied by, scanning electron microscopy, and X-ray diffraction, electrochemical impedance spectroscopy, and voltammetry technique. The improvement of the DTZ oxidation current by modified electrode originated from the increased electrode surface area. The optimized method was validated and the results showed that LOD = 3 nM and good linearity. Also, a linear concentration range of 0.01-150 μM with a LOD of 0.03 μM in presence methyldopa were achieved based on the electrochemical investigations. The prepared sensor showed good repeatability (RSD = 2.26%) and selectivity for DTZ determination in the real samples (relative recovery of 93-102%).