A study on the adsorption behaviors of three hydrophobic quinolones by ordered mesoporous CMK-3

Norfloxacin adsorption by urban green waste biochar: characterization, kinetics, and mechanisms

Biochar, as a potential adsorbent, has been widely employed to remove pollutants from sewage. In this study, a lignin-based biochar (CB-800) was prepared by a simple high-temperature pyrolysis using urban green waste (Cinnamomum camphora leaves) as a feedstock to remove norfloxacin (NOR) from water. Batch adsorption test results indicated that CB-800 had a strong removal capacity for NOR at a wide range of pH values. The maximum adsorption achieved in the study was 50.90 ± 0.64 mg/g at 298 K. The pseudo-first and second-order kinetic models and the Dubinin-Radushkevich isotherm fitted the experimental data well, indicating that NOR adsorption by CB-800 was a complex process involving both physi-sorption and chemi-sorption. The physical properties of CB-800 were characterized by SEM and BET. The mesoporous structures were formed hierarchically on the surface of CB-800 (with an average pore size of 2.760 nm), and the spatial structure of NOR molecules was more easily adsorbed by mesoporous structures. Combined with Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis, it was showed that the main NOR adsorption mechanisms by CB-800 included ion exchange, π-electron coordination, hydrogen bonding, and electrostatic adsorption. Meanwhile, the reduction of C = O and pyridine nitrogen, and the presence of C-F2, also indicated the occurrence of substitution, addition, and redox. This study not only determined the reaction mechanism between biochar and NOR, but also provides guidance to waste managers for the removal of NOR from water by biochar. It is envisaged that the results will broaden the utilization of urban green waste.

Carbon-based materials as efficient adsorbents for the removal of antibiotics: The real contributions of carbon edge sites

Disclosing the effect of edge defects in carbon-based materials on antibiotic removal remains a great challenge. In this study, carbon-based adsorbents (DC-s) with different degrees of edge defects were synthesized on a large scale via a direct calcination of sodium citrate (SC) and their adsorption performance to antibiotics were explored. The experimental results suggested that the edge defects of DC-s samples were the active sites for the adsorption of tetracycline (TC) and norfloxacin (NOR). The adsorption capacity of the optimal sample DC-900 for TC and NOR was 155.8 and 168.0 mg g-1, respectively. Density functional theory (DFT) calculations further revealed that zigzag edge defects rather than armchair edge defects were crucial to the excellent adsorption performance of DC-s samples for antibiotics, and the natures for the difference in the adsorption performance of the two edge defects for antibiotics were their different electronic structures. In addition, DC-900 also showed stable adsorption efficiency for antibiotics in the interferences, dynamic adsorption, and cycle experiments, suggesting its good environmental application potential. This study provides new insight into clarifying the natures of edge defects with carbon-based adsorbents for high-efficiency removal of antibiotics, which may guide the exploration of cost-effective carbon-based adsorbents.

Effects of porous carbon materials on heat storage performance of CaCl2 hydrate for low-grade thermal energy

Thermochemical energy storage (TES) is a promising technology to overcome supply-demand mismatch in the recycling of low-grade industrial waste heat. A novel sorbent is developed for low-grade TES system by employing an ordered mesoporous carbon, CMK-3, as the matrix of CaCl2 hydrates. Expanded graphite (EG) and activated carbon (AC) as matrixes are also discussed for a comparative study. All the composites show quick kinetic within 120 °C. Salt upload ability and heat storage capacity of the composites follow the order of CMK-3/CaCl2 (2037.2 kJ kg-1, 50.4 wt%) > EG/CaCl2 (1637.6 kJ kg-1, 48.1 wt%) > AC/CaCl2 (1221.8 kJ kg-1, 46.3 wt%). CMK-3/CaCl2 show the best heat storage performance due to the ordered tubular mesostructure, which limits the deliquescence at a proper level and provided good accommodation for salt solution. The inner solution absorption presents positive thermal effect that add to total heat storage capacity, making actual heat sorption of CMK-3/CaCl2 much higher than pure chemical reaction heat. A 25-cycle sorption-desorption experiment shows excellent cycling stability of CMK-3/CaCl2. This study proves CMK-3/CaCl2 to be a promising composite for low-grade TES system below 120 °C, and provides new insights for improving energy density of the heat storage materials.

Understanding the Principles and Applications of Dual Z-Scheme Heterojunctions: How Far Can We Go?

In the past seven years, dual Z-scheme heterojunctions evolved as favorable approaches for enhanced charge carrier separation through direct or indirect charge transfer transportation mechanisms. The dynamics of the charge transfer is the major strategy for understanding their photoactivity and stability through the formation of distinctive redox centers. The understanding of currently recognized principles for successful fabrication and classification in different energy and pollution remediation strategies is discussed, and a universal charge transfer-type-based classification of dual Z-schemes that can be adopted for Z-scheme and S-scheme heterojunctions is proposed. Methods used for determining the charge transfer as proof of dual Z-scheme existence are outlined. Most importantly, a new macroscopic N-scheme and a triple Z-scheme that can also be adopted as triple S-scheme heterostructures composed of four semiconductors are proposed for generating both oxidatively and reductively empowered systems. The proposed systems are expected to possess properties that enable them to harvest solar light to drive important chemical reactions for different applications.

Facile synthesis of triazine-based microporous organic network for high-efficient adsorption of flumequine and nadifloxacin: A comprehensive study on adsorption mechanisms and practical application potentials

Flumequine (FLU) and nadifloxacin (NAD), as emerging contaminants, have received extensive attention recently. In this study, a triazine-based microporous organic network (TMON) was synthetized and developed as an excellent adsorbent for FLU and NAD. The adsorption behavior and influence factors were investigated in both single and binary systems. Insight into the adsorption mechanisms were conducted through experiments, models, and computational studies, from macro and micro perspectives including functional groups, adsorption sites, adsorption energy and frontier molecular orbital. The results showed that the maximum adsorption capacities of TMON for FLU and NAD are 325.27 and 302.28 mg/g under 30 °C higher than records reported before. TMON exhibits the better adaptability and anti-interference ability for influence factors, leading to the preferable application effect in kinds of real water samples. TMON also shows the application potentials for the adsorption of other quinolone antibiotics and CO₂ capture. Hydrogen-bonding interaction played the most critical role compared to π-π stacking effect, π-π electron-donor-acceptor interaction, CH-π interaction, and hydrophobic interaction during the adsorption. TMON could be regarded as a promising environmental adsorbent for its large surface area, stable physical and chemical properties, excellent recyclability, and wide range of applications.

Selective adsorption of antibiotics on manganese oxide-loaded biochar and mechanism based on quantitative structure-property relationship model

In this study, MnCl₂-impregnated biomass was oxygen-limited pyrolyzed to produce manganese oxide-loaded biochar (MBC), its adsorption behaviors and influencing factors on tetracycline (TTC), norfloxacin (NOR), and sulfamethoxazole (SMX) were systematically investigated. Three antibiotics exhibited enhanced adsorption behavior on MBC, with maximum adsorption capacity as accurately described by Sips isotherm: TTC (534 mg/g) > NOR (67 mg/g) > SMX (28 mg/g). Hydrogen bonding, n/π-π interactions, electrostatic interaction, surface coordination, and hydrophobic interaction are the major mechanisms for the improved adsorption. Manganese oxide particles on MBC promoted surface coordination and hydrogen bonding. Antibiotic molecules with more hydroxyl oxygen-containing functional groups are more susceptible to migrate to biochar surfaces and to be adhered. Moreover, the quantitative structure-property relationship (QSPR) model was constructed and revealed that hydrogen bonding and π-π interactions were crucial for tetracycline antibiotics selective adsorption. Hence, MBC was a prospective adsorbent with promising applications for antibiotic removal in sewage processing.

Biochar composite derived from cellulase hydrolysis apple branch for quinolone antibiotics enhanced removal: Precursor pyrolysis performance, functional group introduction and adsorption mechanisms

In this study, magnetic biochar (MAB) and humic acid (HA)-coated magnetic biochar produced from apple branches without and after cellulase hydrolysis (HMAB and CHMAB, respectively) were prepared and tested as adsorbents of enrofloxacin (ENR) and moxifloxacin (MFX) in aqueous solution. Compared with MAB and HMAB, novel adsorbent CHMAB possessed a superior mesoporous structure, greater graphitization degree and abundant functional groups. When antibiotic solutions ranged from 2 to 20 mg L^-1, the theoretical maximum adsorption capacities of CHMAB for ENR and MFX were 48.3 and 61.5 mg g^-1 at 35 °C with adsorbent dosage of 0.4 g L^-1, respectively, while those of MAB and HMAB were 39.6 and 54.4 mg g^-1, and 44.7 and 59.0 mg g^-1, respectively. The pseudo-second-order kinetic model and Langmuir model presented a better fitting to the spontaneous and endothermic adsorption process. The maximum adsorption capacity of ENR and MFX onto CHMAB was achieved at initial pH values of 5 and 8, respectively. Additionally, the adsorption capacity of ENR and MFX decreased with increasing concentrations of K⁺ and Ca²⁺ (0.02-0.1 mol L^-1). Synergism between the pore-filling effect, π-π electron-donor-acceptor interactions, regular and negative charge-assisted H-bonding, surface complexation, electrostatic interactions and hydrophobic interactions may dominate the adsorption process. This study demonstrated that a novel magnetic biochar composite prepared through pyrolysis of agricultural waste lignocellulose hydrolyzed by cellulase in combination with HA coating was a promising adsorbent for eliminating quinolone antibiotics from aqueous media.

A novel conductive nanocomposite-based biosensor for ultrasensitive detection of microRNA-21 in serum, using methylene blue as mediator

MicroRNA-21 (miRNA-21) is a common biomarker with high expression in breast tumors. Therefore, sensitive detection of miRNA-21 is of great significance for clinical breast tumor diagnosis. A TH/rGO/CMK-3/AuNPs nanocomposite is composed of thionine (TH), reduced graphene oxide (rGO), ordered mesoporous carbon (CMK-3), and gold nanoparticles (AuNPs), which help to increase the specific surface area of a glassy carbon electrode (GCE) and to amplify the DPV signal. Meanwhile, methylene blue (MB) was combined with the capture probe guanine and absorbed by the composite material to mediate the differential pulse voltammetry (DPV) of the obtained miRNA biosensor. The current response decreased with increasing miRNA-21 concentration under optimal conditions. The biosensor responds to miRNA-21 in the 0.1fM-1 pM concentration range, and the detection limit (LOD) was 0.046 fM. Moreover, human serum samples were effectively detected utilizing the miRNA-21 biosensor with satisfactory results.