Energy generation and revenue potential from municipal solid waste using system dynamic approach

Municipal solid waste management challenges in developing regions: A comprehensive review and future perspectives for Asia and Africa

The rapid urbanization witnessed in developing countries in Asia and Africa has led to a substantial increase in municipal solid waste (MSW) generation. However, the corresponding disposal strategies, along with constraints in land resources and finances, compounded by unorganized public behaviour, have resulted in ineffective policy implementation and monitoring. This lack of systematic and targeted orientation, combined with blind mapping, has led to inefficient development in many areas. This review examines the key challenges of MSW management in developing countries in Asia and Africa from 2013 to 2023, drawing insights from 170 academic papers. Rather than solely focusing on recycling, the study proposes waste sorting at the source, optimization of landfill practices, thermal treatment measures, and strategies to capitalize on the value of waste as more pertinent solutions aligned with local realities. Barriers to optimizing management systems arise from socio-economic factors, infrastructural limitations, and cultural considerations. The review emphasizes the importance of integrating the study area into the circular economy framework, with a focus on enhancing citizen participation in solid waste reduction and promoting recycling initiatives, along with seeking economic assistance from international organizations.

Identification of prevalent leachate percolation of municipal solid waste landfill: a case study in India

Landfill leachate forms when waste-inherent water and percolated rainfall transfer are highly toxic, corrosive, acidic, and full of environmental pollutants. The release of leachate from municipal solid waste (MSW) landfill sites poses a severe hazard to human health and aquatic life. This study examined the impact of leachate from Delhi's Ghazipur landfill on the nearby groundwater quality. Analysis of leachate samples was done to determine various parameters such as total dissolved solids (TDS), hardness, alkalinity, electrical conductivity, pH, BOD5, COD, nitrate, sulphate, chloride and iron, and presence of coliform bacteria. Significant dissolved elements (22,690-34,525 mg/L) were observed in the samples, indicated by the high conductivity value (1156-1405 mho/cm). However, a stable pH range (6.90-7.80) of leachate samples was observed due to high alkalinity concentrations between 2123 and 3256 mg/L. The inverse distance weighing (IDW) interpolation tool from QGIS 3.22.7 developed spatial interpolated models for each parameter across the Ghazipur area. The IDW interpolated graphs of various parameters over the whole study area confirmed these contaminations. In addition, leachate and groundwater samples were physio-chemically analyzed, and temporal fluctuation in landfill waste has also been studied. The temporal fluctuation results showed that when heat is produced, transmitted, and lost throughout the waste system, the maximum temperature position fluctuates over time. The findings of this study highlight the critical importance of landfill management in reducing groundwater contamination from MSW leachate.

Sustainable waste management and waste-to-energy in the context of a circular economy through various waste management technologies

Inappropriate waste management is a considerable ecological risk, leading to detrimental effects on the soil, air, and water quality. It is imperative to address these concerns promptly to minimize the repercussions of solid waste on public health and the ecosystem. It is evident that the level of economic growth directly impacts waste generation. This study intends to use the life cycle assessment (LCA) technique to evaluate the environmental impacts of four alternative municipal solid waste (MSW) management scenarios in Peshawar City, Pakistan. The goal is to discover an option that is both sustainable and minimizes environmental damage. The study examined the system boundaries encompassing the collection and transportation of MSW, along with its processing and final disposal, employing composting, anaerobic digestion (AD), material recovery facilities (MRF), and landfill methods. Comprehensive field studies and an in-depth literature review provided the data regarding Peshawar's existing MSW management system and the proposed scenarios, all of which was inventoried in the OpenLCA 1.10.3 database. Following data collection, the CML-IA technique was employed to analyze the data, measuring the environmental footprint in terms of climate change potential, human toxicity, acidification potential, photochemical oxidation, and eutrophication. A sensitivity analysis was also performed to identify the influence of varying recycling rates on the environmental strain correlated with the proposed scenarios. The analysis results indicated that scenario S2, which combined composting, landfilling, and MRF, exhibited the least environmental impact compared to the other considered scenarios. Furthermore, the sensitivity analysis reflected an inverse correlation between alterations in the recycling rate and the total environmental impact. To counter the environmental problems arising from waste generation, it is essential to incorporate principles of the circular economy into the MSW management approach.

Managing the low carbon transition pathways through solid waste electricity

The potential of solid waste as an energy source is clear, owing to its wide availability and renewable properties, which provide a critical answer for energy security. This can be especially effective in reducing the environmental impact of fossil fuels. Countries that rely heavily on coal should examine alternatives such as electricity from solid waste to provide a constant energy supply while also contributing to atmospheric restoration. In this regards, Low Emissions Analysis Platform (LEAP) is used for simulation the entire energy system in Pakistan and forecasted its capital cost and future CO2 emissions in relation to the use of renewable and fossil fuel resources under the different growth rates of solid waste projects like 20%, 30% and 40% for the study period 2023-2053. The results revealed that, 1402.97 TWh units of energy are generated to meet the total energy demand of 1193.93 TWh until 2053. The share of solid waste based electricity in total energy mix is increasing from a mere 0.81% in 2023 to around 9.44% by 2053 under the 20% growth rate, which then increase to 39.67% by 2053 under the 30% growth rate and further increases to 78.33% by 2053 under the 40% growth rate. It is suggested that 40% growth rate for solid waste based electricity projects is suitable for Pakistan until 2053 because under this condition, renewable sources contributes 95.2% and fossil fuels contributed 4.47% in the total energy mix of Pakistan. Hence, CO2 emissions are reduced from 148.26 million metric tons to 35.46 million metric tons until 2053 but capital cost is increased from 13.23 b$ in 2023 to 363.11 b$ by 2053.

New insights in food security and environmental sustainability through waste food management

Food waste has been identified as one of the major factors that constitute numerous anthropogenic activities, especially in developing countries. There is a growing problem with food waste that affects every part of the waste management system, from collection to disposal; finding long-term solutions necessitates involving all participants in the food supply chain, from farmers and manufacturers to distributors and consumers. In addition to food waste management, maintaining food sustainability and security globally is crucial so that every individual, household, and nation can always get food. "End hunger, achieve food security and enhanced nutrition, and promote sustainable agriculture" are among the main challenges of global sustainable development (SDG) goal 2. Therefore, sustainable food waste management technology is needed. Recent attention has been focused on global food loss and waste. One-third of food produced for human use is wasted every year. Source reduction (i.e., limiting food losses and waste) and contemporary treatment technologies appear to be the most promising strategy for converting food waste into safe, nutritious, value-added feed products and achieving sustainability. Food waste is also employed in industrial processes for the production of biofuels or biopolymers. Biofuels mitigate the detrimental effects of fossil fuels. Identifying crop-producing zones, bioenergy cultivars, and management practices will enhance the natural environment and sustainable biochemical process. Traditional food waste reduction strategies are ineffective in lowering GHG emissions and food waste treatment. The main contribution of this study is an inventory of the theoretical and practical methods of prevention and minimization of food waste and losses. It identifies the trade-offs for food safety, sustainability, and security. Moreover, it investigates the impact of COVID-19 on food waste behavior.

Municipal solid waste management instruments that influence the use of the refuse as fuel in developing countries: A critical review

Landfills are the destination of most of the refuse generated whereas composting, material recycling, and Waste-to-Energy (WtE) technologies are not commonly employed in developing countries. However, the destination for energy purposes could be supplied with this refuse, improving the viability of energy use. Thus, this article raises some questions to identify aspects that could encourage its use as refuse-derived fuel (RDF) in these countries. Among them, does environmental education affect the municipal solid waste (MSW) source separation with emphasis on a destination? Can selective collection and extended producer responsibility (EPR) affect the MSW for energy recovery? Is there competition between the recycling market and the energy market for RDF? A systematic review of the literature was conducted to gather data and provide answers to such questions. This enabled to observe that EPR, selective collect expansion and source separation influence the quantity and quality of waste sent for energy use. Both internal and external factors impact on source separation. Additionally, there is evidence to support that despite several studies showing their technical, economic, environmental and social viability, the methods of energy usage of the refuse still need to improve their deployment in developing countries. In addition to identifying the main research gaps to be filled in future studies, the article also identified the instruments of MSW management that are to be applied in developing countries to divert recyclable and organic waste from landfill.

Biodegradable waste to renewable energy conversion under a sustainable energy supply chain management

Effective surveillance during smart cities' sustainable development allows their cleanliness to be maintained by reusing waste to produce renewable energy. This study quantifies the biodegradable waste generated in specific regions of several cities and presents ways to convert it into renewable energy. This energy can then be used to partially support regional energy demands. This study explores ways of reducing carbon emissions for biodegradable waste collection processes in regional centers, ultimately sending the biodegradable waste to the energy conversion center. The smart production system allows for the flexible production and autonomation of rates of conversion; green technology depends on each regional center's research management, which is a decision variable for reducing carbon emissions. The major contribution of this study is to consider an energy supply chain management with flexibility of energy conversion under the reduction of carbon emissions, which leads to a sustainable ESCM with the global maximum profit. This study uses mathematical modeling to decrease biodegradable waste with conversion of energy through a classical optimization technique. The solution to this mathematical model yielded significant results, providing insight into waste reduction, reduced carbon emissions and the conversion of biodegradable waste to energy. The model is examined using numerical experiments, and its conclusion supports the model with the fundamental assumptions. Results of sensitivity analysis provide insight into the reduction and re-utilization of wastes, carbon emission reduction, and the benefits of using renewable energy.

A review on biological methodologies in municipal solid waste management and landfilling: Resource and energy recovery

Rapid industrialization and urbanization growth combined with increased population has aggravated the issue of municipal solid waste generation. MSW has been accounted for contributing tremendously to the improvement of sustainable sources and safe environment. Biological processing of MSW followed by biogas and biomethane generation is one of the innumerable sustainable energy source choices. In the treatment of MSW, biological treatment has some attractive benefits such as reduced volume in the waste material, adjustment of the waste, economic aspects, obliteration of microorganisms in the waste material, and creation of biogas for energy use. In the anaerobic process the utilizable product is energy recovery. The current review discusses about the system for approaching conversion of MSW to energy and waste derived circular bioeconomy to address the zero waste society and sustainable development goals. Biological treatment process adopted with aerobic and anaerobic processes. In the aerobic process the utilizable product is compost. These techniques are used to convert MSW into a reasonable hotspot for resource and energy recovery that produces biogas, biofuel and bioelectricity and different results in without risk and harmless to the ecosystem. This review examines the suitability of biological treatment technologies for energy production, giving modern data about it. It likewise covers difficulties and points of view in this field of exploration.