Enhancement of nitrogen removal and energy recovery from low C/N ratio sewage by multi-electrode electrochemical technology and tidal flow via siphon aeration

Towards bio-utilization and energy recovery potential exploration of membrane foulant from membrane bioreactor by using microbial fuel cell-centered technology

The utilization of membrane foulant is expected to push forward the developments of membrane bioreactor (MBR). In this study, the combination of microbial fuel cell (MFC) with bio-electrochemical enhanced hydrolysis process was proposed, and three systems were conducted to utilize the membrane foulant and simultaneously harvest electricity. Polysaccharides (PS), proteins (PN) and humic acid (HA) concentration variations and the fluorescent compound changes in different chambers revealed the biodegradability of membrane foulant. Optimized HRT improved the hydrolysis of membrane foulant while allowing MFC to utilize the biodegradable components efficiently. MFC-MFC system had the highest voltage and satisfactory effluent quality at HRT of 1 d. Microbial community structure analysis indicated that Proteobacteria, Planctomycetes and Bacteroidetes were the majority phyla and network analysis further revealed that Proteobacteria played a key role in membrane foulant utilization. This study suggests that MFC hybrid systems has potential application for synchronous membrane foulant reuse and energy recovery.

Enhanced nitrogen removal via biochar-mediated nitrification, denitrification, and electron transfer in constructed wetland microcosms

This study investigated the effect of biochar on real domestic wastewater treatment by constructed wetlands (CWs). To evaluate the role of biochar as a substrate and electron transfer medium on nitrogen transformation, three treatments of CW microcosms were established: conventional substrate (T1), biochar substrate (T2), and biochar-mediated electron transfer (T3). Nitrogen removal increased from 74% in T1 to 77.4% in T2 and 82.1% in T3. Nitrate generation increased in T2 (up to 2 mg/L) but decreased in T3 (lower than 0.8 mg/L), and the nitrification genes (amoA, Hao, and nxrA) in T2 and T3 increased by 132-164% and 129-217%, respectively, compared with T1 (1.56 × 10⁴- 2.34 × 10⁷ copies/g). The nitrifying Nitrosomonas, denitrifying Dechloromonas, and denitrification genes (narL, nirK, norC, and nosZ) in the anode and cathode of T3 were significantly higher than those of the other treatments (increased by 60-fold, 35-fold, and 19-38%). The genus Geobacter, related to electron transfer, increased in T3 (by 48-fold), and stable voltage (~150 mV) and power density (~9 uW/m²) were achieved. These results highlight the biochar-mediated enhancement of nitrogen removal in constructed wetlands via nitrification, denitrification, and electron transfer, and provide a promising approach for enhanced nitrogen removal by constructed wetland technology.

Performance optimization of two-stage constructed wetland-microbial fuel cell system for the treatment of high-concentration wastewater

Constructed wetland-microbial fuel cell (CW-MFC) has attracted much attention because of its dual functions of wastewater treatment and energy recovery. However, its performance in treating high-concentration wastewater is degraded by the decreased dissolved oxygen at the cathode and insufficient electron acceptors. In this study, two CW-MFC systems with cathodic aeration were connected in series to investigate the effects of aeration rate and hydraulic retention time (HRT) on the removal of pollutants and the performance of electricity production in high-concentration wastewater. Results showed that aeration enhanced NH₄⁺-N and TP removal by 45.0-49.8% and 11.5-18.0%, compared with the unaerated condition, respectively. Meanwhile, no significant change regarding COD removal was observed. Aeration enhances the output voltage and power density of the system, especially the first stage CW-MFC, which improved the power production performance by 1 to 2 orders-of-magnitude. Increasing HRT improves the system's pollutant treatment efficiency and power generation performance for high-concentration wastewater. Still, the extension of HRT to 2 days will not contribute much to improving the removal efficiency. Under optimized conditions, the maximum total removal rates of COD, NH₄⁺-N, and TP for the two-stage tandem CW-MFC system were 99.3 ± 0.2%, 92.4 ± 1.6%, and 79.5 ± 3.4%, respectively. Meanwhile, the maximum output voltage and maximum power density of the first-stage CW-MFC were 405 mV and 138.0 mW/m³, respectively. In contrast, the maximum output voltage and maximum power density of the second stage are 105 mV and 14.7 mW/m³, respectively.

Bioelectrochemical systems for enhanced nitrogen removal with minimal greenhouse gas emission from carbon-deficient wastewater: A review

Nitrogen pollution and the rising amount of wastewater generation are calling for advanced wastewater treatments, which is particularly necessary for carbon-deficient wastewater that contains multi-species inorganic nitrogen, since conventional heterotrophic denitrification processes cannot remove nitrogen completely when carbon sources are insufficient. For that, bioelectrochemical systems (BES) have been recently developed because they can simultaneously produce electricity and remove resistant nitrogen from the carbon-deficient wastewater. However, the simultaneous removal of multi-species inorganic nitrogen cannot be achieved by electroautotrophic denitrification using BES alone. Moreover, the efficiency of nitrogen removal and power generation has been thwarted by the low energy output, high internal resistance of the device, and electron competition in non-denitrification pathways. This review article discusses the latest developments for nitrogen removal through BES-enhanced denitrification and elucidates multiple coupled BES-based denitrification pathways to remove multi-species inorganic nitrogen simultaneously. Focus points of the research area include coupling BES technologies with emerged methods, electron transfer enhancement, and avoiding electron competition that improves performance with less cost. The prospect of reducing emissions of greenhouse gases is also critically reviewed, in the hope of reducing potential intermediate products of denitrification, such as nitrous oxide (a potent greenhouse gas), through multi-factor regulation. We imply that BES is a good choice for future scale-up applications of MFC coupled with MEC to treat carbon-deficient wastewater. Overall, this review will provide useful information for the development of advanced technologies to treat carbon-deficient wastewater with less emission of greenhouse gases.

Improving the removal efficiency of nitrogen and organics in vertical-flow constructed wetlands: the correlation of substrate, aeration and microbial activity

Four vertical-flow CWs (VFCWs) with different substrates and aeration conditions were studied on nutrient-removal capacity from synthetic wastewater. Zeolite substrate VFCWs (none-aerated: VFCW-1, aerated: VFCW-3) paralleled with ceramsite (none-aerated:VFCW-2, aerated: VFCW-4) were used to study the removal efficiencies of N and organics, the bacterial community, and the related functional genes. The results indicated that the pollutant removal efficiency was significantly enhanced by intermittent aeration. VFCW-4 (ceramsite with aeration) demonstrated a significant potential to remove NH₄⁺-N (89%), NO₃^--N (78%), TN (71%), and COD (65%). VFCW-3 and VFCW-4 had high abundances of Amx, amoA, and nirK genes, which was related to NH₄⁺-N and NO₂^--N removal. The microbial diversity and structure varied with aeration and substrate conditions. Proteobacteria, Actinobacteria, Candidatus, and Acidobacteria were the main bacteria phyla, with the average proportion of 38%, 21%, 19%, and 7% in the VFCWs. Intermittent aeration increased the abundance of Acidobacteria, which was conducive to the removal of organic matters. Overall, ceramsite substrate combined with intermittent aeration has a great potential in removing pollutants in VFCWs.

Effects of multiple key factors on the performance of petroleum coke-based constructed wetland-microbial fuel cell

In this study, two constructed wetland-microbial fuel cells (CW-MFC), including a closed-circuit system (CCW-MFC) and an open-circuit system (OCW-MFC) with petroleum coke as electrode and substrate, were constructed to explore the effect of multiple key factors on their operation performances. Compared to a traditional CW, the CCW-MFC system showed better performance, achieving an average removal efficiency of COD, NH₄⁺-N, and TN of 94.49 ± 1.81%, 94.99 ± 4.81%, and 84.67 ± 5.6%, respectively, when the aeration rate, COD concentration, and hydraulic retention time were 0.4 L/min, 300 mg/L, and 3 days. The maximum output voltage (425.2 mV) of the CCW-MFC system was achieved when the aeration rate was 0.2 L/min. In addition, the CCW-MFC system showed a greater denitrification ability due to the higher abundance of Thiothrix that might attract other denitrifying bacteria, such as Methylotenera and Hyphomicrobium, to participate in the denitrifying process, indicating the quorum sensing could be stimulated within the denitrifying microbial community.

Ecological restoration performance enhanced by nano zero valent iron treatment in constructed wetlands under perfluorooctanoic acid stress

Perfluorooctanoic acid (PFOA) of widespread use can enter constructed wetlands (CWs) via migration, and inevitably causes negative impacts on removal efficiencies of conventional pollutants due to its ecotoxicity. However, little attention has been paid to strengthen performance of CWs under PFOA stress. In this study, influences of nano zero valent iron (nZVI), which has been demonstrated to improve nutrients removal, were explored after exemplifying threats of PFOA to operation performance in CWs. The results revealed that 1 mg/L PFOA suppressed the nitrification capacity and phosphorus removal, and nZVI distinctly improved the removal efficiency of ammonia and total phosphorus in CWs compared to PFOA exposure group without nZVI, with the maximum increases of 3.65 % and 16.76 %. Furthermore, nZVI significantly stimulated dehydrogenase (390.64 % and 884.54 %) and urease (118.15 % and 246.92 %) activities during 0-30 d and 30-60 d in comparison to PFOA group. On the other hand, nitrifying enzymes were also promoted, in which ammonia monooxygenase increased by 30.90 % during 0-30 d, and nitrite oxidoreductase was raised by 117.91 % and 232.10 % in two stages. Besides, the content of extracellular polymeric substances (EPS) under nZVI treatment was 72.98 % higher than PFOA group. Analyses of Illumina Miseq sequencing further certified that nZVI effectively improved the community richness and caused the enrichment of microorganisms related to nitrogen and phosphorus removal and EPS secreting. These results could provide valuable information for ecological restoration and decontamination performance enhancement of CWs exposed to PFOA.