Polypyrrole-based nanomaterials: A novel strategy for reducing toxic chemicals and others related to environmental sustainability applications

Investigation of TiO2/PPy nanocomposite for photocatalytic applications; synthesis, characterization, and combination with various substrates: a review

The use of photocatalysis technology, specifically visible light photocatalysis that relies on sustainable solar energy, is the most promising for the degradation of contaminants. The interaction of conducting polymer and titanium dioxide (TiO2) leads to the exchange that enhances the alteration of the semiconductor's surface and subsequently decreases the bandgap energy. Polypyrrole (PPy) and TiO2 nanocomposites have promising potential for photocatalytic degradation. Chemically and electrochemical polymerization are two predominant methods for adding inorganic nanoparticles to a conducting polymer host matrix. The most commonly utilized method for producing PPy/TiO2 nanocomposites is the in-situ chemical oxidative polymerization technique. Immobilizing PPy/TiO2 on substrates causes more charge carriers (electron/hole pairs) to be produced on the surface of TiO2 and enhances the rate of photocatalytic degradation compared to pure TiO2. The increased surface charge affects how electron/hole pairs are formed when visible light is used. This study provides a comprehensive investigation into the synthesis, characterization, application, efficiency, and mechanism of PPy/TiO2 nanocomposites in the photocatalytic degradation process of various pollutants. Furthermore, the effect of stabilizing the TiO2/PPy nanocomposite on various substrates will be investigated. In conclusion, the review outlines the ongoing challenges in utilizing these photocatalysts and highlights the essential concerns that require attention in future research. Its objective is to help researchers better understand photocatalysts and encourage their use in wastewater treatment.

Transfer-Printing of Insoluble Conducting Polymer for Soft 3D Conformal All-Organic Transistors

The development of high-precision insoluble conducting polymer patterns for soft electronics is extremely challenging, mainly because of the incompatibility of the synthesis process with the underlying layers. In this study, a novel transfer-printing method is designed that enables the fabrication of photolithographic insoluble conducting polypyrrole (PPy) electrode patterns on soft substrates with high precision, demonstrating compatibility with various soft organic functional layers. Excellent mechanical stability, good biocompatibility, ultra-smooth surface, and outstanding conformability are observed. The photolithographic PPy electrode patterns, combined with an elastic organic semiconductor and dielectric, produce conformal all-organic transistors with mobility of 1.8 cm2 V-1 s-1 . This study paves the way to use insoluble conducting polymers to develop complex, high-density flexible patterns and offers a promising organic electrode for the new-generation soft all-organic electronics.

New insight into ZnO@ZIFs composite: an efficient photocatalyst with boosted light response ability and stability for CO2 reduction

One of the main causes of climate change and energy exhaustion is the excessive use of fossil fuels. Photocatalytic carbon dioxide (CO₂) reduction technology uses inexhaustible sunlight to directly convert CO₂ into value-added chemicals or fuels not only solving the problem of greenhouse effect but also alleviating the shortage of fossil energy. In this work, a well-integrated photocatalyst is synthesized through growing zeolitic imidazolate frameworks (ZIFs) with different metal nodes on ZnO nanofiber (NFs) for CO₂ reduction. One-dimensional (1D) ZnO NFs have better CO₂ conversion efficiency due to the high surface-to-volume ratio and low light reflectivity. 1D nanomaterials with superior aspect ratios can be assembled into free-standing flexible membranes. In addition, it has been found that ZIFs nanomaterials with bimetallic nodes not only have better CO₂ reduction capabilities but also exhibit superior thermal and water stability. The photocatalytic CO₂ conversion efficiency and selectivity of ZnO@ZCZIF are shown to be significantly enhanced which can be attribute to the strong CO₂ adsorption/activation, efficient light capture, excellent electron-hole pair separation efficiency, and specific metal Lewis sites. This work provides insights into the rational construction of well-integrated composite materials to improve the photocatalytic carbon dioxide reduction performance.

One-pot solvothermal synthesis of Bi/Bi2S3/Bi2WO6 S-scheme heterojunction with enhanced photoactivity towards antibiotic oxytetracycline degradation under visible light

A novel noble-metal-free ternary Bi/Bi₂S₃/Bi₂WO₆ S-scheme heterojunction and Schottky junction was successfully synthesized by one-pot solvothermal method. UV-Vis spectroscopy showed improved light absorption in the ternary composite structure. Electrochemical impedance spectroscopy and photoluminescence spectroscopy confirmed the reduced interfacial resistivity and photogenerated charge recombination rate of the composites. Using oxytetracycline (OTC) as model pollutant, Bi/Bi₂S₃/Bi₂WO₆ presented high photocatalytic activity towards OTC degradation, where the removal rate of Bi/Bi₂S₃/Bi₂WO₆ was 1.3 and 4.1 times higher than that of Bi₂WO₆ and Bi₂S₃ under visible light irradiation in 15 min, respectively. The excellent visible photocatalysis activity was attributed to the SPR effect of metal Bi and the direct S-scheme heterojunction of Bi₂S₃ and Bi₂WO₆ with the matched energy band structure, which led to the increased electron transfer rate and high separation efficiency of the photogenerated election-hole pairs. After seven cycles, the degradation efficiency for 30 ppm OTC with Bi/Bi₂S₃/Bi₂WO₆ only decreased 20.4%. In the degradation solution, the composite photocatalyst leached only 16 ng/L Bi and 26 ng/L W of metal with high photocatalytic stability. Moreover, free radical quenching experiment and electron spin-resonance spectroscopy experiment revealed that ·O₂^-, ¹O₂, h⁺ and ·OH played crucial roles in the photocatalytic degradation of OTC. Based on the analysis of high performance liquid chromatography-mass spectrometry for the intermediates in the degradation process, the degradation pathway was provided. Finally, combined with ecotoxicological effect analysis, the decreased toxicity of OTC after degradation towards rice seedlings was confirmed.

Simultaneous S-scheme promoted Ag@AgVO3/g-C3N4/CeVO4 heterojunction with enhanced charge separation and photo redox ability towards solar photocatalysis

Photocatalytic removal of toxic contaminants is one of the emerging techniques for water remediation, but it suffers from low redox ability, charge recombination and poor light harvesting efficiency. The present work reports a simultaneous S-scheme promoted by CeVO₄/g-C₃N₄/Ag@AgVO₃. The formation of the S-scheme mechanism enhanced the generation of photogenerated carriers and also improved the redox ability of the electrons and holes in the reduction and oxidation photocatalysts. The ternary demonstrated remarkable photo switching properties along with efficient charge separation which was achieved through dual interfacial interaction within the ternary (Ag@AgVO₃/g-C₃N₄ and CeVO₄/g-C₃N₄). The heterojunction formation was verified through the shift in binding energy spectra in the X-ray Photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy analysis (HR-TEM). The ternary demonstrated reduced PL intensity, width of space charge region and an upsurge in photogenerated current density in the order of 93 μA/cm2 (∼6X higher than all the pristine). This resulted in efficient removal of methyl orange, methylene blue and endocrine disruptive bisphenol-A with a removal rate of 0.02 min^-1, 0.03 min^-1 and 0.0087 min^-1 and an apparent quantum yield of 4.6 × 10^-9 (Methylene Orange), 6.89 × 10^-9 (Methylene Blue) and 2 × 10^-9 (Bisphenol A/H₂O₂).

Removal of low-concentration tetracycline from water by a two-step process of adsorption enrichment and photocatalytic regeneration

Developing a high-performance method that can effectively control pollution caused by low concentrations of antibiotics is urgently needed. Herein, a novel three-dimensional PPy/Zn₃In₂S₆ nanoflower composites were prepared for the comprehensive treatment of low-concentration tetracycline (Tc) hydrochloride in wastewater based on the adsorption/photocatalysis of Zn₃In₂S₆ and the conductivity of PPy. In this preparation method, adsorption enrichment and photocatalytic regeneration were conducted in two steps, eliminating the dilution and dispersion effects of aqueous solvents on photocatalytic species and antibiotics. Results showed that Zn₃In₂S₆ could effectively adsorb 87.85% of Tc at pH of 4.5 and photocatalytically degrade Tc at pH of 10.5. Although the adsorption capacity of Zn₃In₂S₆ was slightly reduced after being combined with PPy, its photocatalytic efficiency was substantially enhanced. Specifically, 0.5%PPy/Zn₃In₂S₆ could degrade 99.92% of the surface-enriched Tc in 1 h and induce the regeneration of the adsorption sites. Furthermore, the adsorption capacity remained above 85% even after recycling PPy/Zn₃In₂S₆ ten times. The photocatalytic degradation mechanism analysis revealed that the enrichment of Tc on 0.5%PPy/Zn₃In₂S₆ negatively impacts the photocatalytic efficiency, while •O₂^- and •OH radicals were the main oxidative species that played an important role in the photoregeneration process.

A superior ternary Z-scheme photocatalyst of Bi/Black Phosphorus nanosheets/P-doped BiOCl containing interfacial P-P bond and metallic mediator for H2O2 production and RhB degradation

Photocatalytic performance is significantly influenced by the efficiency of photogenerated electron-hole pairs separation and transfer. In this paper, rational designed Z-scheme Bi/Black Phosphorus Nanosheets/P-doped BiOCl (Bi/BPNs/P-BiOCl) nanoflower photocatalyst was synthesized by a facile in-situ reduction process. The interfacial P-P bond between Black phosphorus nanosheets (BPNs) and P-doped BiOCl (P-BiOCl) was investigated by the XPS spectrum. The Bi/BPNs/P-BiOCl photocatalysts exhibited enhanced photocatalytic performance for H₂O₂ production and RhB degradation. The optimally modified photocatalyst (Bi/BPNs/P-BiOCl-20) showed an excellent photocatalytic H₂O₂ generation rate of 4.92 mM/h and RhB degradation rate of 0.1169 min^-1 under simulated sunlight irradiation, which was 1.79 times and 1.25 times greater than the P-P bond free Bi/BPNs/BiOCl-20. The mechanism was investigated through charge transfer route, radical capture experiments, and band gap structure analysis, indicating that the formation of Z-scheme heterojunctions and interfacial P-P bond not only enhances the redox potential of the photocatalyst but also facilitates the separation and migration of photogenerated electrons-holes. This work might provide a promising strategy for constructing Z-scheme 2D composite photocatalysts combining interfacial heterojunction and elemental doping engineering for efficient photocatalytic H₂O₂ production and organic dye pollutant degradation.

SnS2/polypyrrole for high-efficiency photocatalytic oxidation of benzylamine

Here, SnS2/polypyrrole (PPy) was synthesized, which shows high catalytic activity for the photocatalytic oxidation of benzylamine under mild conditions (at 25 oC, in air and without adding additional sacrificial reagent,...