Enhanced remediation of surface-bound hexavalent chromium in soils using the acidic and alkaline fronts of electrokinetic technology

Iodide- and electrochemical assisted removal of mercury by Cirsium arvense from gold tailings in the Amansie West District, Ghana

Mercury (Hg) pollution in Ghana through mining has become a serious environmental challenge. This study investigates the potential of Cirsium arvense to photostabilize Hg using electrokinetic current with or without an iodide solution in gold mine tailings heavily contaminated through mining activities in southern Ghana. An initial Hg concentration of 9.60 mg/kg using cold vapor atomic absorption spectrometry (CVAAS) was determined. The biological absorption coefficient, bioconcentration factor, and translocation factor of Hg have been presented. Cirsium arvense therefore had a higher bioconcentration factor (BCF) of 2.6-5.15 mg/kg, and a transfer factor (TF) of 0.24-0.36 indicating a higher efficiency for phytostabilization. Both the rate and time of extractions of Hg from the tailings by Cirsium arvense are efficiently improved in the combined electric current and iodide treatment. Plant and electric current combined treatment and plant and iodide combined treatment had only 60 and 50% phytostabilization rates, respectively. The combined plant, iodide, and electric current treatment has proven to be superior with about >90% Hg removal rate. Therefore, the combined plant, iodide, and electric current treatment resulted in a higher Hg removal efficiency by Cirsium arvense in a shorter period due to higher solubilization rate and electromigration effects on Hg species.

Highly alkaline electrokinetic extraction: Characteristics of chromium mobilization, conversion and transport in high alkalinity soil

In site chromium (Cr) contaminated soil characterized by high alkalinity and carbonate content, protons are not effectively targeted for Cr(III) mobilization but rather accelerate the reduction of easily transportable Cr(VI) within the acidification electrokinetic (EK) system. As an alternative, the highly alkaline extraction conditions (HAECs) maintained by anolyte regulation are explored owing to the ability to desorb strong binding Cr(VI) and form anionic Cr(III)-hydroxides (Cr(OH)4-, Cr(OH)52-). The results demonstrate that HAECs were more efficient in mobilizing ions in severe alkalinity and electrical conductivity soil compared to organic acid acidifying extraction conditions (OAECs). Simultaneously, a limited amount of soluble Cr(III) was produced; however, its transportation was hindered and more noticeable in the case of Cr(VI), displaying a distinct retention phase within the intermediate soil chamber. The antagonistic interplay between electromigration and electroosmotic flow was considered the main responsible factor. The conversion intensity of Cr(VI) to Cr(III) was inhibited at HAECs. The promising mobilization and low conversion intensity contributed to total Cr removal. At HAECs, enhanced electromigration and electroosmotic flow combined with a favorable oxidation environment may facilitate in situ delivery of oxidants, offering practical implications for the EK detoxification of high alkalinity site soil contaminated with Cr. The practicability of HAECs is likely to be enhanced when the cost-benefit balance of providing a simultaneous energy supply during site treatment is resolved.

Nonlinearly coupled electro-osmotic flow in variable charge soils

Electro-osmosis has been valued as a promising technology to enhance the dewatering of waste sludge, stabilization and environmental remediation of soils with low permeability. However, the coefficient of electro-osmotic permeability (keo) is commonly taken as constant value which is particularly not the case in variable charge soil. As a result, the nonlinearity of the electro-osmotic flow (EOF) and the direction reverse could not be interpreted. Herein, the electro-chemical parameters were monitored in electro-osmotic experiment with natural variable charge soil. It was observed that the evolutions showed significant nonlinear behavior and were correlated. The comprehensive Zeta potential model proposed by the authors was applied to simulate the nonlinear keo induced by the variable pH and electrolyte concentration. The agreement between tested and simulated flow rate variation and excess pore water pressure distribution demonstrated the reliability of the theory. The error rate of the simulations through coupling nonlinear keo and voltage gradient Ex was reduced to 29.4% from 381.9% of calculations with constant parameters. The direction reverse of EOF was innovatively interpreted. Hence, the numerical model would act as a useful tool to connect these electro-chemical parameters and provide guidance to evaluate contributions of commonly used pH conditioning measurements.

Effect of electrokinetic process on in situ stabilization and detoxification of arsenic-contaminated soil with high content of calcium

Owing to the high risk of human exposure to arsenic-contaminated soil, reducing its toxicity is essential. This study used the electrokinetic (EK) process with iron-rich electrodes to synchronously achieve the accumulate, stabilize and detoxify soil arsenic. Changes in arsenic valence, leaching toxicity, and microbial communities related to toxicity were comprehensively considered. The results demonstrated that arsenic was mainly transported toward the anode and accumulated by electromigration owing to the negatively charged arsenic anions under EK conditions. The cathode approaching effectively promote arsenic movement to the anode; the largest As(T) transportation rate of 30.61% was achieved near the cathode (S4). The transportation ratio of As(III) was 1.84 times more than that of As(V). The As(III) content and leaching toxicity of soil arsenic in all treatments decreased after applying the EK process. In particular, the anode approaching effectively elevated the average ratios of soil As(III) oxidation and stabilization to 37.88% and 61.73%, respectively. Correspondingly, the total phospholipid fatty acid content increased substantially after EK treatment and showed a pollution stress elimination effect. The electrokinetic effect can essentially cause highly active and easily migrated arsenic to accumulate near the anode and middle sections. The electric field mediated iron mineralization and stabilized arsenic by oxidizing As(III) and reacting with newly formed iron-rich phases (S). Meanwhile, the electric field regulated the form of soil calcium from CaCO3 to CaSO4 and caused calcium-bound arsenic to change to a more stable form. According to these results, in situ stabilization and detoxification of arsenic-contaminated soil can be realized by the EK process, avoiding stabilizer addition and excavation.

Mechanism and application of modified bioelectrochemical system anodes made of carbon nanomaterial for the removal of heavy metals from soil

Bioelectrochemical techniques are quick, efficient, and sustainable alternatives for treating heavy metal soils. The use of carbon nanomaterials in combination with electroactive microorganisms can create a conductive network that mediates long-distance electron transfer in an electrode system, thereby resolving the issue of low electron transfer efficiency in soil remediation. As a multifunctional soil heavy metal remediation technology, its application in organic remediation has matured, and numerous studies have demonstrated its potential for soil heavy metal remediation. This is a ground-breaking method for remediating soils polluted with high concentrations of heavy metals using soil microbial electrochemistry. This review summarizes the use of bioelectrochemical systems with modified anode materials for the remediation of soils with high heavy metal concentrations by discussing the mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems, focusing on the suitability of carbon nanomaterials and acidophilic bacteria. Finally, we discuss the emerging limitations of bioelectrochemical systems, and future research efforts to improve their performance and facilitate practical applications. The mass-transfer mechanism of electrochemically active microorganisms in bioelectrochemical systems emphasizes the suitability of carbon nanomaterials and acidophilic bacteria for remediating soils polluted with high concentrations of heavy metals. We conclude by discussing present and future research initiatives for bioelectrochemical systems to enhance their performance and facilitate practical applications. As a result, this study can close any gaps in the development of bioelectrochemical systems and guide their practical application in remediating heavy-metal-contaminated soils.