The Raman spectroscopy and SEM/EDS investigation of the primary sources of microplastics from cosmetics available in Poland

Beyond microbeads: Examining the role of cosmetics in microplastic pollution and spotlighting unanswered questions

The presence of microplastics in cosmetics and personal care products (C&PCPs) has been increasingly in the public eye since the early 2010s. Despite increasing research into the potential environmental and health effects of microplastics, most research to date on microplastics in C&PCPs has investigated "rinse-off" products, while the potential impacts of "leave-on" C&PCPs have been largely neglected, despite these products being purchased in greater volumes and often having two or more microplastic ingredients in their formulations(CosmeticsEurope, 2018b). This review aims to synthesize the current knowledge of microplastic in C&PCPs, assessing the potential environmental and human health impacts of C&PCPs and discussing the regulatory implications. The lack of studies on leave-on C&PCPs is significant, suggesting a severe knowledge gap regarding microplastic presence in, and emissions from, C&PCPs. There is a noticeable lack of studies on the (eco)toxicological consequences of microplastic exposure from C&PCPs. As a result, significant aspects of microplastic contamination may be overlooked in the microplastic legislations emerging globally (including from the European Commission), which intend to restrict microplastic use in C&PCPs but focus on rinse-off C&PCPs only. This review highlights the potential consequences of microplastics in leave-on C&PCPs for regulatory decision-making, particularly as alternatives to microplastics are considered during the phase-out periods and spotlights the need for sufficient monitoring and research on these alternatives, to avoid unforeseen consequences.

Microbial Succession on Microplastics in Wastewater Treatment Plants: Exploring the Complexities of Microplastic-Microbiome Interactions

Despite some effectiveness of wastewater treatment processes, microplastics accumulate in sewage sludge and their further use may contribute to the release of plastic microplastics into the environment. There is an urgent need to reduce the amount of microplastics in sewage sludge. Plastic particles serve as solid substrates for various microorganisms, promoting the formation of microbial biofilms with different metabolic activities. The biofilm environment associated with microplastics will determine the efficiency of treatment processes, especially biological methods, and the mechanisms of organic compound conversion. A significant source of microplastics is the land application of sewage sludge from wastewater treatment plants. The detrimental impact of microplastics affects soil enzymatic activity, soil microorganisms, flora, fauna, and plant production. This review article summarizes the development of research related to microplastics and discusses the issue of microplastic introduction from sewage sludge. Given that microplastics can contain complex composite polymers and form a plastisphere, further research is needed to understand their potential environmental impact, pathogenicity, and the characteristics of biofilms in wastewater treatment systems. The article also discusses the physicochemical properties of microplastics in wastewater treatment plants and their role in biofilm formation. Then, the article explained the impact of these properties on the possibility of the formation of biofilms on their surface due to the peculiar structure of microorganisms and also characterized what factors enable the formation of specific plastisphere in wastewater treatment plants. It highlights the urgent need to understand the basic information about microplastics to assess environmental toxicity more rationally, enabling better pollution control and the development of regulatory standards to manage microplastics entering the environment.

Metabolomic and biochemical disorders reveal the toxicity of environmental microplastics and benzo[a]pyrene in the marine polychaete Hediste diversicolor

Recently, the abundance of environmental microplastics (MPs) has become a global paramount concern. Besides the danger of MPs for biota due to their tiny size, these minute particles may act as vectors of other pollutants. This study focused on evaluating the toxicity of environmentally relevant concentrations of MPs (10 and 50 mg/kg sediment) and benzo[a]pyrene (B[a]P, 1 µg/kg sediment), alone and in mixture, for 3 and 7 days in marine polychaete Hediste diversicolor, selected as a benthic bioindicator model. The exposure period was sufficient to confirm the bioaccumulation of both contaminants in seaworms, as well as the potential capacity of plastic particles to adsorb and vehiculate the B[a]P. Interestingly, increase of acidic mucus production was observed in seaworm tissues, indicative of a defense response. The activation of oxidative system pathways was demonstrated as a strategy to prevent lipid peroxidation. Furthermore, the comprehensive Nuclear Magnetic Resonance (NMR)-based metabolomics revealed significant disorders in amino acids metabolism, osmoregulatory process, energetic components, and oxidative stress related elements. Overall, these findings proved the possible synergic harmful effect of MPs and B[a]P even in small concentrations, which increases the concern about their long-term presence in marine ecosystems, and consequently their transfer and repercussions on marine fauna.

Occurrence and analysis of microplastics in municipal wastewater, Poland

Microplastics are a growing environmental threat and wastewater treatment plants have been identified as significant conduits for these pollutants. This study addresses microplastic loading in the influent of a large urban wastewater treatment plant, presenting a detailed analysis of their prevalence and characteristics. Our findings reveal a concentration of 4.09 microplastic particles per litre in the tributary. We performed a detailed statistical comparison of the microplastic particles, categorising them by shape, size, colour, and polymer type. Using Fourier transform total reflectance infrared spectroscopy, we identified 13 different polymer types, with polyethylene terephthalate, rubber, and polyethylene predominating. The analysis showed that textile fibres, mainly from clothing, are the most prevalent form of microplastic in wastewater, followed by fragments from the breakdown of larger plastic objects and films. This research highlights the critical need for strategic interventions to mitigate microplastic pollution at municipal sources.

Microplastics in multi-environmental compartments: Research advances, media, and global management scenarios

During the past decades, microplastics (MPs) have become an emerging concern due to their persistence and potential environmental threat. MP pollution has become so drastic that it has been found in the human food chain, breast milk, polar regions, and even the Himalayan basin, lake, etc. Inflammation, pulmonary hypertension, vascular occlusions, increased coagulability and blood cell cytotoxicity, disruption of immune function, neurotoxicity, and neurodegenerative diseases can all be brought on by severe microplastic exposure. Although many MPs studies have been performed on single environmental compartments, MPs in multi-environmental compartments have yet to be explored fully. This review aims to summarize the muti-environmental media, detection tools, and global management scenarios of MPs. The study revealed that MPs could significantly alter C flow through the soil-plant system, the structure and metabolic status of the microbial community, soil pH value, biomass of plant shoots and roots, chlorophyll, leaf C and N contents, and root N contents. This review reveals that MPs may negatively affect many C-dependent soil functions. Different methods have been developed to detect the MPs from these various environmental sources, including microscopic observation, density separation, Raman, and FT-IR analysis. Several articles have focused on MPs in individual environmental sources with a developed evaluation technique. This review revealed the extensive impacts of MPs on soil-plant systems, microbial communities, and soil functions, especially on water, suggesting possible disturbances to vital ecological processes. Furthermore, the broad range of detection methods explored emphasizes the significance of reliable analytical techniques in precisely evaluating levels of MP contamination in various environmental media. This paper critically discusses MPs' sources, occurrences, and global management scenarios in all possible environmental media and ecological health impacts. Future research opportunities and required sustainable strategies have also been suggested from Bangladesh and international perspectives based on challenges faced due to MP's pollution.

Identification and morphological characterization of different types of plastic microparticles

The knowledge of the polymeric composition of microplastics (MPs) is interesting because offers useful information on the resistance, durability, and degradability of these materials, also allowing progress in the control of this contamination. However, there is currently a lack of reliable standardized methods for the identification, and characterization of the plastic microparticles. This work uses different techniques in a complementary manner for the identification, and characterization of MPs that more frequently are found in the environment. A total of 10 types of plastics were collected (polystyrene (PS), polyethylene terephthalate (PETE), polyethylene (PE), high- and low-density polyethylene (HDPE and LDPE, respectively), polyvinyl chloride (PVC), polypropylene (PP), polytetrafluoroethylene (PTFE), Polyamide (PA, Nylon 6,6) and poly-carbonate (PC)) and their chemical identification were analyzed by reflectance-attenuated infrared (FTIR-ATR). Furthermore, the samples were observed using light microscopy, and scan-ning electron microscopy (SEM). Also, staining with 12 different dyes was performed to improve the identification of microplastics. The results of this study revealed that PETE, PE, HDPE and LDPE, whose SEM images exhibited smoothness and flat uniformity of their surface, were not (or less) susceptible to adsorb staining solutions while PP, PA, PVC, and PTFE, were capable of adsorbing the dye solutions.

Potential Effects of Environmental and Occupational Exposure to Microplastics: An Overview of Air Contamination

Microplastics (MPs) are now ubiquitous environmental contaminants that lead to unavoidable human exposure; they have received increasing attention in recent years and have become an emerging area of research. The greatest concern is the negative impacts of MPs on marine, fresh-water, and terrestrial ecosystems, as well as human health, to the extent that the World Health Organization (WHO) calls for increased research and standardized methods to assess exposure to MPs. Many countries and international organizations are implementing or proposing legislation in this regard. This review aims to summarize the current state of legislation, indoor and outdoor contamination, and potential human health risk due to exposure to airborne MPs, considering that occupational exposure to MPs is also becoming a growing area of concern. Even though research regarding MPs has continuously increased in the last twenty years, the effects of MPs on human health have been scarcely investigated, and toxicity studies are still limited and not directly comparable, due to the lack of standardized studies in this field.

Deciphering the seasonal dynamics of microplastic morphotypes and associated co-contaminants along the northwest coast of India

In the present study, the northwest coast of India, bordering the Arabian Sea, was selected to evaluate the microplastic (MP) abundance. This is the first study to emphasize the effects of different seasons on MP distribution. The collected MPs were dried, segregated, and evaluated based on their morphotype, size, color, and polymer type. A total of 1756.6, 7326.6, and 202 particles/kg of sand were estimated in the pre-monsoon, monsoon and post-monsoon seasons, respectively, with a dominance of polypropylene (PP) type of plastic in the pre-monsoon and high-density polyethylene (HDPE) in monsoon and post-monsoon seasons. HDPE and PP collected MPs during the monsoon season were further characterized for associated contaminants. Metal absorbance was detected using SEM-EDX mapping and ICP-MS. The presence of organic compounds (OCs) was analyzed using GC-MS. MPs exhibit distinct associations with metals, among which the HDPE pellet morphotype exhibits a higher range of metal adsorption. Total 61 different OCs were associated with MPs. The HDPE pellets contained the highest amounts of hydrophobic organic compounds. PP pellets were found to contain triglycerides, fatty aldehydes, and alkaloids, along with HOCs. Among morphotypes, pellet forms of MPs were found to adsorb more contaminants. These co-contaminants infiltrate the study area through sewage runoff and shoreline debris deposition, subsequently interacting with MPs. Furthermore, the MP diversity was studied by employing the MP diversity integrated index, which suggests that most of the MP diversity was observed in the pre-monsoon period. The pollution load index employed an MP risk assessment, which presented a low degree of MP contamination. In contrast, the polymer hazard index was calculated as 21650.3 in post-monsoon, placing the area under the extreme danger category. It is evident from the data that the types of MP is more important than their number. Thus, MP morphotypes have importance in the adsorption of co-contaminants.

Evaluation of particle generation due to deterioration of flooring in schools

Particulate matter is harmful to humans. An important indoor source of such particles is the deterioration of floor materials brought about by occupants walking. Accordingly, an experiment was conducted to simulate the deterioration of floor material spacing. Considering a school schedule with repeated semesters and vacations, the experiment was conducted by repeating heat-and-rest cycles. Similar results were obtained for particle emission rates under each condition during the first and second deterioration periods. The PVC tiles generated more particles under aged conditions than under non-aged conditions, whereas the wood generated fewer particles under aged conditions. In addition to the quantitative results, a study was conducted on the characteristics of the generated particles, and the particulate matter found in plastic was confirmed in the PVC tiles. Schools where children are present for more than 6 h a day may be exposed to more particulate matter. Therefore, replacing plastic-based materials with eco-friendly building materials is expected to have long-term health benefits for children.

Characteristics and removal efficiency of microplastics at secondary wastewater treatment plant in Lithuania

Wastewater treatment plants (WWTPs) are the most significant barrier between anthropogenic microplastics and environmental ecosystems. The distribution and characteristics of microplastics in WWTPs remain uncertain and incompletely understood, particularly in northeastern Europe (Baltic States), where there is a lack of data on microplastic pollution and distribution. This study presents the removal efficiency and variation in characteristics of microplastics in different stages of the secondary WWTP during a 3-month sampling campaign in Lithuania. The abundance, size, shape, color, and chemical composition of microplastics in the wastewater at different treatment stages were thoroughly examined, in a size range from 20 to 1000 μm. On average, 2962 ± 25 particles/L of microplastic enter the studied WWTP. The obtained microplastic removal efficiency was 55.4% ± 3.9%, highlighting the necessity to enhance wastewater treatment strategies focusing on microplastic removal. Fragment-type microplastics smaller than 100 μm were removed from wastewater samples with the highest removal efficiency. Furthermore, our study includes recommendations to improve microplastic removal efficiency and contribute to mitigating microplastic pollution. PRACTITIONER POINTS: A large number of MPs in the size range of 20-1000 μm enter Lithuanian WWTP. Small-sized MPs within a range of 20-50 μm and 50-100 μm were removed with the highest efficiency of 54.07 ± 1.68% and 56.4 ± 2.43%, respectively. The shape and size of MPs have a major impact on the efficiency of their removal. Future research should prioritize the development of economical and energy-efficient systems, specifically designed for the removal of MPs in WWTPs.

Approach to an answer to "How dangerous microplastics are to the human body": A systematic review of the quantification of MPs and simultaneously exposed chemicals

This review aims to facilitate future research on microplastics (MPs) in the environment using systematic and analytical protocols, ultimately contributing to assessment of the risk to human health due to continuous daily exposure to MPs. Despite extensive studies on MP abundance in environment, identification, and treatment, their negative effects on human health remain unknown due to the lack of proof from clinical studies and limited technology on the MP identification. To assess the risk of MPs to human health, the first step is to estimate MP intake via ingestion, inhalation, and dermal contact under standardized exposure conditions in daily life. Furthermore, rather than focusing on the sole MPs, migrating chemicals from plastic products should be quantified and their health risk be assessed concurrently with MP release. The critical factors influencing MP release and simultaneously exposed chemicals (SECs) must be investigated using a standardized identification method. This review summarises release sources, factors, and possible routes of MPs from the environment to the human body, and the quantification methods used in risk assessment. We also discussed the issues encountered in MP release and SEC migration. Consequently, this review provides directions for future MP studies that can answer questions about MP toxicity to human health.

Evaluation of microplastic pollution in a lotic ecosystem and its ecological risk

This study investigates the microplastics (MPs) pollution in Tigris River, assessing spatial and temporal variations in water and sediment. MPs presence was high during both seasons 3429.2 MPs/m3 (dry season) and 3363.2 MPs/m3 (wet season) in water, and 121.2 MPs/kg (wet season) and 123.2 MPs/kg (dry season) in sediment. MPs morphology mostly consisted of fibers and fragments, with sizes below 0.5 mm. Transparent and white were the most common colors, and they were primarily composed of polyethylene (PE) and polypropylene (PP). Ecological risk assessment, using the plastic hazard index (PHI), pollution load index (PLI), and potential ecological risk index (PERI), categorized the risk from danger to extreme danger based on PHI, while PLI and PERI indicated a minor risk. These findings provide initial evidence of microplastics pollution in the Tigris River's water and sediment, emphasizing the need for action by decision-makers to mitigate these risks.

A Complete Guide to Extraction Methods of Microplastics from Complex Environmental Matrices

Sustainable development is a big global challenge for the 21st century. In recent years, a class of emerging contaminants known as microplastics (MPs) has been identified as a significant pollutant with the potential to harm ecosystems. These small plastic particles have been found in every compartment of the planet, with aquatic habitats serving as the ultimate sink. The challenge to extract MPs from different environmental matrices is a tangible and imperative issue. One of the primary specialties of research in environmental chemistry is the development of simple, rapid, low-cost, sensitive, and selective analytical methods for the extraction and identification of MPs in the environment. The present review describes the developments in MP extraction methods from complex environmental matrices. All existing methodologies (new, old, and proof-of-concept) are discussed and evaluated for their potential usefulness to extract MPs from various biotic and abiotic matrices for the sake of progress and innovation. This study concludes by addressing the current challenges and outlining future research objectives aimed at combating MP pollution. Additionally, a set of recommendations is provided to assist researchers in selecting appropriate analytical techniques for obtaining accurate results. To facilitate this process, a proposed roadmap for MP extraction is presented, considering the specific environmental compartments under investigation. By following this roadmap, researchers can enhance their understanding of MP pollution and contribute to effective mitigation strategies.

Kıyı Lagün Sedimentlerinde Mikroplastiklerin Oluşumları ve Mekansal Dağılımları: Küçükçekmece Lagünü Örneği

Nehir, haliç ve lagünler, karasal ve deniz ekosistemleri arasında bağlantıyı sağlarken, tıpkı diğer kirleticilerde olduğu gibi sediment yapılarında da mikroplastik kirliliği hakkında kapsamlı bir profil ortaya koymaktadır. Bu çalışmada, Küçükçekmece Lagünü’nün üç farklı sucul alanından (deniz, kanal ve göl) alınan sediment örneklerinde mikroplastik bolluğu ve karakterizasyonunun belirlenmesi amaçlanmıştır. Bu kapsamda, lagünde belirlenen 5 istasyondan 12 aylık (Mart 2019 – Şubat 2020) sediment örnekleri alınmıştır. Mikroplastik ön işlemlerine tabi tutulan sediment örneklerinde, stereomikroskop ile mikroplastik bolluğu sayımı ve kategorizasyonu (boyut, tip ve renk) yapılmıştır. Ortalama mikroplastik bolluğu 2922,32±517,35 MP/kg olarak belirlenmiş olup, tespit edilen ortalama mikroplastik bolluğu değeri, ülkemizde daha önce yapılmış benzer çalışmalara kıyasla 2,4 kat daha yüksek bulunmuştur. Liflerin (%59) baskın mikroplastik tipi olduğu, baskın mikroplastik renginin siyah (%42) olduğu ve MP boyutlarının %50’sinin 1-100 μm arasında olduğu belirlenmiştir. Mevsimsel mikroplastik dağılımı irdelendiğinde ise, en yüksek bolluk değerlerinin yağışlı sezon olan kış aylarında olduğu tespit edilmiştir. Çalışma alanında en yüksek ortalama mikroplastik bolluğuna sahip L1 istasyonu, Küçükçekmece Lagünü Bağlantı Alanı temsil etmekte olup, lagündeki tüm antropojenik baskıların hissedildiği istasyon olarak ortaya çıkmaktadır. Bu çalışma, dünyanın diğer bölgelerindeki benzer sediment alanları için mikroplastik bolluğu ve dağılımı hakkında temsili veriler sağlamayı amaçlamaktadır.

Quantitative analysis of polystyrene microplastic and styrene monomer released from plastic food containers

Since the COVID-19 outbreak, the use of disposable plastics has rapidly increased along with the amount of plastic waste. During fragmentation, microplastics and other chemical substances contained in plastics are released. These then enter humans through food which could be problematic considering their hazardous potential. Polystyrene (PS), which is widely used in disposable containers, releases large amounts of microplastics (MPs), but no studies have investigated the release mechanisms of PS-MPs and simultaneously exposed contaminants. Therefore, in this study, the effects of pH (3, 5, 7, and 9), temperature (20, 50, 80, and 100 °C), and exposure time (2, 4, 6, and 8 h) on MPs release were systematically examined. A quantitative/qualitative study of MPs and styrene monomers was performed using microscopy-equipped Fourier-transformed infrared spectroscopy and gas chromatography-mass spectrometry. The release of PS-MPs (36 items/container) and simultaneously exposed pollutants (SEP), such as ethylene glycol monooleate (EGM), was highest at pH 9, 100 °C, and 6 h, which was proportional to the test temperature and time. Under the same conditions, 2.58 μg/L of styrene monomer migrated to the liquid food simulants. The fragmentation was proceeded by oxidation/hydrolysis and accelerated by increased temperature and exposure time. The strong positive correlation between PS-MPs and SEPs releases at pH and temperature indicates that PS-MPs and SEPs follow the same release process. However, a strongly negative correlation between PS-MPs and styrene monomers at the exposed time shows that styrene migration does not follow the same release process, but does its partition coefficient.

Controllable preparation of mesoporous spike gold nanocrystals for surface-enhanced Raman spectroscopy detection of micro/nanoplastics in water

Microplastics and nanoplastics are emerging classes of environmental contaminants that pose significant threats to human health. In particular, small nanoplastics (<1 μm) have drawn considerable attention owing to their adverse effects on human health; for example, nanoplastics have been found in the placenta and blood. However, reliable detection techniques are lacking. In this study, we developed a fast detection method that combines membrane filtration technology and surface-enhanced Raman spectroscopy (SERS), which can simultaneously enrich and detect nanoplastics with sizes as small as 20 nm. First, we synthesized spiked gold nanocrystals (Au NCs), achieving a controlled preparation of thorns ranging from 25 nm to 200 nm and regulating the number of thorns. Subsequently, mesoporous spiked Au NCs were homogeneously deposited on a glass fiber filter membrane to form an Au film as a SERS sensor. The Au-film SERS sensor achieved in-situ enrichment and sensitive SERS detection of micro/nanoplastics in water. Additionally, it eliminated sample transfer and prevented the loss of small nanoplastics. Using the Au-film SERS sensor, we detected 20 nm to 10 μm standard polystyrene (PS) microspheres with a detection limit of 0.1 mg/L. We also realized the detection of 100 nm PS nanoplastics at the 0.1 mg/L level in tap water and rainwater. This sensor provides a potential tool for rapid and susceptible on-site detection of micro/nanoplastics, especially small-sized nanoplastics.

Current research trends on cosmetic microplastic pollution and its impacts on the ecosystem: A review

Since the advent of microplastics, it has become a vital component, directly or indirectly, in our daily lives. With advancements in their use, microplastics have become an integral part of personal care, cosmetics, and cleaning products (PCCPs) and emerged as a domestic source of environmental pollution. Over the years, researchers have ascertained the harmful effects of microplastics on the environment. In this context, the assessment and monitoring of microplastics in PCCPs require considerable attention. In addition, it raises concern regarding the need to develop innovative, sustainable, and environmentally safe technologies to combat microplastic pollution. Therefore, this review is an endeavor to uncover the fate, route and degradation mechanism of cosmetic microplastics. In addition, the major technological advancement in cosmetic microplastic removal and the steps directed toward mitigating cosmetic microplastic pollution are also discussed.