Effect of steel slag on ammonia removal and ammonia-oxidizing microorganisms in zeolite-based tidal flow constructed wetlands

Insight into the microbial community of denitrification process using different solid carbon sources: Not only bacteria

There is a lack of understanding about the bacterial, fungal and archaeal communities' composition of solid-phase denitrification (SPD) systems. We investigated four SPD systems with different carbon sources by analyzing microbial gene sequences based on operational taxonomic unit (OTU) and amplicon sequence variant (ASV). The results showed that the corncob-polyvinyl alcohol sodium alginate-polycaprolactone (CPSP, 0.86±0.04 mg NO3--N/(g·day)) and corncob (0.85±0.06 mg NO3--N/(g·day)) had better denitrification efficiency than polycaprolactone (PCL, 0.29±0.11 mg NO3--N/(g·day)) and polyvinyl alcohol-sodium alginate (PVA-SA, 0.24±0.07 mg NO3--N/(g·day)). The bacterial, fungal and archaeal microbial composition was significantly different among carbon source types such as Proteobacteria in PCL (OTU: 83.72%, ASV: 82.49%) and Rozellomycota in PVA-SA (OTU: 71.99%, ASV: 81.30%). ASV methods can read more microbial units than that of OTU and exhibit higher alpha diversity and classify some species that had not been identified by OTU such as Nanoarchaeota phylum, unclassified_ f_ Xanthobacteraceae genus, etc., indicating ASV may be more conducive to understand SPD microbial communities. The co-occurring network showed some correlation between the bacteria fungi and archaea species, indicating different species may collaborate in SPD systems. Similar KEGG function prediction results were obtained in two bioinformatic methods generally and some fungi and archaea functions should not be ignored in SPD systems. These results may be beneficial for understanding microbial communities in SPD systems.

Norfloxacin affects inorganic nitrogen compound transformation in tailwater containing Corbicula fluminea

The Asian clam, Corbicula fluminea, commonly used in engineered wetlands receiving tailwater, affects nitrogen compound transformation in water. This study investigates how a commonly observed antibiotic in tailwater, norfloxacin, impact nitrogen compound transformation in tailwater containing C. fluminea. The clam was exposed to artificial tailwater with norfloxacin (0, 0.2, 20, and 2000 μg/L) for 15 days. Water properties, C. fluminea ecotoxicity responses, microorganism composition and nitrification- or denitrification-related enzyme activities were measured. Results revealed norfloxacin-induced increases and reductions in tailwater NH4+ and NO2- concentrations, respectively, along with antioxidant system inhibition, organ histopathological damage and disruption of water filtering and digestion system. Microorganism composition, especially biodiversity indices, varied with medium (clam organs and exposure water) and norfloxacin concentrations. Norfloxacin reduced NO2- content by lowering the ratio between microbial nitrifying enzyme (decreased hydroxylamine oxidoreductase and nitrite oxidoreductase activity) and denitrifying enzyme (increased nitrate reductase and nitrite reductase activity) in tailwater. Elevated NH4+ content resulted from upregulated ammonification and inhibited nitrification of microorganisms in tailwater, as well as increased ammonia emission from C. fluminea due to organ damage and metabolic disruption of the digestion system. Overall, this study offers insights into using benthic organisms to treat tailwater with antibiotic residues, especially regarding nitrogen treatment.

Augmentation of saline wastewater treatment via functional enrichment of bacteria and optimized distribution in constructed wetlands combined with slag-sponges at different temperatures

China's aquatic environment continues to face several difficulties. Ecological constructed wetland systems (CWs) can be used to treat polluted saline water to alleviate water shortages regionally and globally. However, the performance is limited by low temperatures. To expand the use of CWs, we introduced a slag-sponge, a flaky material derived from alkaline waste slag, to create a newly constructed wetland system that can operate at both low and high temperatures. We evaluated its effectiveness by placing it at different heights in our devices. The results showed that the treatment was effective for saline wastewater with multiple contaminants. The efficiency was 20% higher than that of traditional CWs. Slag-sponges were found to carry pore structures and exhibit thermal insulation, which led to the enrichment of functional microbial communities (Chryseobacterium and Exiguerium) at low temperatures according to the microbial species analysis. The enhanced CWs offer another option for the treatment of polluted saline water in the environment and provide promising strategies for the utilization of waste slag.

Removal efficiency and abundance of nitrogen cycling microorganism in three bio-matrix materials to treat swine wastewater

A bio-matrix material (BMM) system is used to pretreat swine wastewater and reduce the nitrogen (N) concentration to the tolerance range of plants in constructed wetlands. In this study, rice straw (RS), wheat straw (WS), and corn stalk (CS) were applied to treat pollutants from swine wastewater, respectively. This one year-long field experiment make up for the lack of long-term experiments and mechanistic investigations of BMM. The pollutant removal efficiency, degradation process of crop straw, and the abundance of nitrogen cycling genes were determined in different BMM systems. The results showed that the removal efficiency of COD, TN, NH4+, and NO3- was the best in the initial 6 months. Furthermore, RS and WS exhibited favorable annual removal efficiency of TN and NH4+, which were 32.81% and 32.99%, 35.3% and 34.97%, respectively. Moreover, the removal efficiency of COD was 30.81% in three BMM systems. Meanwhile, it was found that the dry matter (DM) degradation of crop straws was fast in the first 4-5 months. The degradation rates of cellulose, hemicellulose, and lignin were 94.19%, 94.36%, and 87.32%, respectively, in 1 year. The abundance of nitrogen cycling genes significantly increased by adding BMM, compared with CK (P < 0.05). This showed the abundance of the hzsB gene in RS was the highest, while nirK, nirS, AOA, and AOB were the highest in WS. The addition of RS and WS was better than that of CS in promoting the abundance of nitrogen cycling microorganisms. The results indicated that adding BMM could enhance the anaerobic ammonia oxidation, nitrification, and denitrification. This study not only extends our comprehension of BMM mechanisms in swine wastewater treatment but also serves as a guiding light for numerous farms in similar climate regions.

Enhanced ammonia removal in tidal flow constructed wetland by incorporating steel slag: Performance, microbial community, and heavy metal release

Utilizing alkaline solid wastes, such as steel slag, as substrates in tidal flow constructed wetlands (TFCWs) can effectively neutralize the acidity generated by nitrification. However, the impacts of steel slag on microbial communities and the potential risk of heavy metal release remain poorly understood. To address these knowledge gaps, this study compared the performance and microbial community structure of TFCWs filled with a mixture of steel slag and zeolite (TFCW-S) to those filled with zeolite alone (TFCW-Z). TFCW-S exhibited a much higher NH4+-N removal efficiency (98.35 %) than TFCW-Z (55.26 %). Additionally, TFCW-S also achieved better TN and TP removal. The steel slag addition helped maintain the TFCW-S effluent pH at around 7.5, while the TFCW-Z effluent pH varied from 3.74 to 6.25. The nitrification and denitrification intensities in TFCW-S substrates were significantly higher than those in TFCW-Z, consistent with the observed removal performance. Moreover, steel slag did not cause excessive heavy metal release, as the effluent concentrations were below the standard limits. Microbial community analysis revealed that ammonia-oxidizing bacteria, ammonia-oxidizing archaea, and complete ammonia-oxidizing bacteria coexisted in both TFCWs, albeit with different compositions. Furthermore, the enrichment of heterotrophic nitrification-aerobic denitrification bacteria in TFCW-S likely contributed to the high NH4+-N removal. In summary, these findings demonstrate that the combined use of steel slag and zeolite in TFCWs creates favorable pH conditions for ammonia-oxidizing microorganisms, leading to efficient ammonia removal in an environmentally friendly manner.

Development and trends of constructed wetland substrates over the past 30 years: a literature visualization analysis based on CiteSpace

Constructed wetland substrates (CWSs) have received considerable attention owing to their importance in adsorbing and degrading pollutants, providing growth attachment points for microorganisms, and supporting wetland plants. There are differences in the configurations and functions of constructed wetlands (CWs) for treating different water bodies and sewage, resulting in a wide variety of substrates. Research on the application and mechanism of CWSs is not sufficiently systematic. Therefore, the current research advancements and hotspots must be identified. Hence, we used CiteSpace to analyze 1955 English publications from the core collection database of the Web of Science to assess the current state of the CWS research field. Based on the cooperative network analysis, the roles of various countries, institutions, and authors in research on CWSs were reviewed. Keyword co-occurrence and cluster analyses were used to discuss the transformation of CWSs from removing traditional pollutants to emerging pollutants and the transition from incorporating natural substrates to artificial substrates. Finally, we underscored the need for more emphasis to be placed on the collocation and application of the CWSs at different latitudes. Furthermore, the substrate micro-interface process and its effects on the interaction patterns of pollutants and microorganisms should be thoroughly investigated to provide theoretical guidance for the development of wetland applications and mechanisms.

Effects of different aeration strategies and ammonia-nitrogen loads on nitrification performance and microbial community succession of mangrove constructed wetlands for saline wastewater treatment

In highly salinized environments, nitrification is the process that limits the rate of nitrogen transformation and removal. Therefore, this study concentrated on the impacts of different aeration strategies and NH4+-N loads on the nitrification performance of mangrove constructed wetlands (CWs), as well as investigating the succession mechanism of ammonia-oxidizing microorganisms (AOMs). The results showed that both the CW with continuous aeration (CA-CW) and intermittent aeration (IA-CW) achieved a nitrification efficiency of more than 98% under an NH4+-N loading of 1.25-4.7 g/(m2·d). However, the total nitrogen removal rates of IA-CW under low and high ammonia-nitrogen loads (LAL, 20.09 ± 4.4% and HAL, 8.77 ± 1.35%, respectively) were higher than those of CA-CW (16.11 ± 4.7% and 3.32 ± 2.3%, respectively), especially under HAL (p < 0.05). Pearson correlation analysis showed that under different operating conditions, the differential secretion of Kandelia candel rhizosphere organic matter had a certain regulatory effect on nitrification and denitrification groups such as Candidatus Nitrocosmicus, Nitrancea, Truepera, Pontibacter, Halomonas, and Sulfurovum in the wetland root layer. The quantitative polymerase chain reaction revealed that the NH4+-N load rate was the primary factor driving the succession of the AOMs, with different aeration strategies exacerbating this process. Overall, this study revealed that the dominant AOMs in mangrove CWs could be significantly altered by regulating the aeration modes and pollution loads to adjust the rhizosphere organic matter in situ, thereby resulting in more efficient nitrification.