Solar-driven semi-conductor photocatalytic water treatment (TiO2, g-C3N4, and TiO2+g-C3N4) of cyanotoxins: Proof-of-concept study with microcystin-LR

Versatile g-C3N4/AlOOH nanocomposites: Efficient photocatalyst for dye removal, algae inactivation, and glucose detection

Visible light photocatalysts hold great promise for water purification, yet research on highly efficient, non-toxic photocatalysts is limited. This study synthesized novel g-C3N4/AlOOH photocatalytic nanocomposites via thermal condensation, enhancing adsorption and visible light degradation by 36-fold and 11-fold, respectively, compared to g-C3N4 alone. The nanocomposites achieved a 98% removal rate of methyl orange under xenon lamp irradiation (>400 nm) for 1 h. This study marked the first demonstration of using a low-power LED (0.6W) for photocatalytic algae inactivation in an aquarium ecosystem. Fluorescence spectroscopy showed a 98.9% removal efficiency of chlorophyll a after 12 h of photocatalyzing by g-C3N4/AlOOH, doubling that of g-C3N4 alone. Algae inactivation was attributed to rupture, dehydration, and changes in dissolved organic matter. Hole (h+) trapping experiments identified them as the primary active species for degrading methyl orange and algae. Materials analyses confirmed the formation of g-C3N4-AlOOH heterostructures, high surface potential, and Type II heterojunctions, which reduce electron-hole pair recombination. Furthermore, g-C3N4/AlOOH demonstrated selective non-enzymatic fluorescence detection of glucose, showing a linear relationship in 0∼4 mM, suitable for tears glucose detection. This study offers crucial insights and strategies for designing novel, non-toxic, high-performance visible light photocatalytic materials, efficient dye degradation, algae inactivation, and selective glucose detection.

Development of a novel LED-IoT photoreactor for enhanced removal of carbamazepine waste driven by solar energy

This study introduces an innovative LED-IoT photoreactor, representing a significant advancement in response to the demand for sustainable water purification. The integration of LED-IoT installations addresses the challenge of intermittent sunlight availability, employing LEDs with a spectrum mimicking natural sunlight. Passive Infra-Red (PIR) sensors and Internet of things (IoT) technology ensure consistent radiation intensity, with the LED deactivating in ample sunlight and activating in its absence. Utilizing a visible light-absorbing photocatalyst developed through sol-gel synthesis and mild-temperature calcination, this research demonstrates a remarkable carbamazepine removal efficiency exceeding 95% under LED-IoT system illumination, compared to less than 90% efficiency with sunlight alone, within a 6-h exposure period. Moreover, the designed photocatalytic system achieves over 60% mineralization of carbamazepine after 12 h. Notably, the photocatalyst demonstrated excellent stability with no performance loss during five further cycles. Furthermore, integration with renewable energy sources facilitated continuous operation beyond daylight hours, enhancing the system's applicability in real-world water treatment scenarios. A notable application of the LED-IoT system at an operating sewage treatment plant showed nearly 80% efficiency in carbamazepine removal from sewage in the secondary settling tank after 6 h of irradiation, coupled with nearly 40% mineralization efficiency. Additionally, physicochemical analyses such as XPS and STA-FTIR confirm that the carbamazepine photooxidation process does not affect the surface of the photocatalyst, showing no adsorption for degradation products.

Nanoparticles for Mitigation of Harmful Cyanobacterial Blooms

With the rapid advancement of nanotechnology and its widespread applications, increasing amounts of manufactured and natural nanoparticles (NPs) have been tested for their potential utilization in treating harmful cyanobacterial blooms (HCBs). NPs can be used as a photocatalyst, algaecide, adsorbent, flocculant, or coagulant. The primary mechanisms explored for NPs to mitigate HCBs include photocatalysis, metal ion-induced cytotoxicity, physical disruption of the cell membrane, light-shielding, flocculation/coagulation/sedimentation of cyanobacterial cells, and the removal of phosphorus (P) and cyanotoxins from bloom water by adsorption. As an emerging and promising chemical/physical approach for HCB mitigation, versatile NP-based technologies offer great advantages, such as being environmentally benign, cost-effective, highly efficient, recyclable, and adaptable. The challenges we face include cost reduction, scalability, and impacts on non-target species co-inhabiting in the same environment. Further efforts are required to scale up to real-world operations through developing more efficient, recoverable, reusable, and deployable NP-based lattices or materials that are adaptable to bloom events in different water bodies of different sizes, such as reservoirs, lakes, rivers, and marine environments.

Capability of TiO2 and Fe3O4 nanoparticles loaded onto Algae (Scendesmus sp.) as a novel bio-magnetic photocatalyst to degration of Red195 dye in the sonophotocatalytic treatment process under ultrasonic/UVA irradiation

In this study, the magnetic photocatalyst Scendesmus/Fe3O4/TiO2 was synthesized, and its sonophotocatalytic properties in relation to the degradation of the Red195 dye were evaluated. Particles were characterized using a scanning electron microscope (SEM), Fourier's transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), and a vibrating-sample magnetometer (VSM). At a pH of 5, a photocatalyst dosage of 100 mg, an initial R195 concentration of 100 mg/l, an ultrasound power of 38W, and an exposure time of 20 min, the maximum Red195 removal efficiency (100%) was achieved. After five cycles of recycling, the composite's sonophotocatalytic degradation stability for R195 remains above 95%. Experiments on scavenging indicate that electrons (h+) and hydroxyls (OH-) are indispensable decomposition agents. The removal of R195 by Scendesmus/Fe3O4/TiO2 is consistent with the pseudo-first-order kinetic, Freundlich, and Henderson's isotherm models, as determined by kinetic and isotherm investigations. The negative activation enthalpy of the standard (ΔH°) illuminates the exothermic adsorption mechanism. The increase in standard Gibbs activation free energy (ΔG°) with increasing temperature reveals the process is not spontaneous. As indicated by the negative value of the standard entropy of activation (ΔS°), activation of the reactants resulted in a loss of freedom.