Application of a novel hybrid MIL-53(Al)@rice husk for the adsorption of glyphosate in water: Characteristics and mechanism of the process

MOF biochar composites for environmental protection and pollution control

Research studies on Metal Organic Frameworks (MOF) based composites and their potential applications in environmental engineering and pollution control have recently emerged. An attractive material to form MOF composites is biochar (BC); a low-cost, highly porous carbonaceous by-product of biomass pyrolysis. This paper presents a critical review on MOF-biochar composites, focusing on fabrication, characterisation, modification, and applications in environmental protection and pollution control. The adsorption mechanisms and influential parameters are systematically examined to develop an insight into interactions between MOF and biochar in remedial process. The adsorption capacity of composites is generally doubled compared to the standalone biochar, while MOFs maintain their crystallinity, even over multiple regeneration cycles, indicating the composites' long-term applicability and sustainability. These findings highlight the potential of MOF-biochar composites for environmental applications and identify key areas for further research to enhance their sustainability in environmental protection and green energy.

Collaboratively removal of phosphate and glyphosate from wastewater by a macroscopic Zr-SA/Ce-UIO-66 adsorbent: Performance, mechanisms and applicability

Dissolved inorganic and organic phosphorus is a major factor in triggering the eutrophication of water bodies. At present, a novel Zr4+ cross-linked sodium alginate encapsulated in Ce-UIO-66 microspheres (Zr-SA/Ce-UIO-66) was prepared and systematically characterized. Its ability for capture of phosphate and glyphosate in their single and binary systems has been investigated comprehensively. Results showed that Zr-SA/Ce-UIO-66 exhibits excellent phosphate adsorption, achieving 92 % removal and a maximum adsorption capacity of 125 mg P/g at 313 K. Diversified mechanisms, including electrostatic attraction, ligand exchange and hydrogen bonding, have cooperatively participated in phosphate removal. Interestingly, in phosphate and glyphosate mixed solutions, the presence of phosphate significantly enhanced the removal of glyphosate for the formation of complexes between phosphate ions and the adsorbent. And that was similar to the presence of glyphosate in phosphate adsorption. Simulated wastewater experiments demonstrated the adsorbent's practical application in water contaminated with both organic phosphorus and glyphosate composites and its potential for recycling and reuse.

Rapid sequential detection of Al3+ and glyphosate using an "Off-On-Off" fluorescent probe based on salicylate modified layered double hydroxides

A fluorescent probe based on salicylate modified layered double hydroxide (LDH-SA) is presented, enabling the swift sequential detection of Al3+, fosetyl-Al and glyphosate in aqueous environment. The probe was synthesized using a simple co-precipitation procedure, and its properties and synthesis conditions were thoroughly characterized and optimized. A unique "off-on-off" fluorescent response was observed when the probe sequentially interacted with Al3+ and glyphosate, and the detection method based on this phenomenon was established. The limits of detection for Al3+ and glyphosate were determined as 0.03 μmol/L and 0.03 mg/L, respectively, with rapid detection periods of one minute and four minutes. The LDH-SA/Al3+ complex requires Al3+ to generate a chelation-gathered fluorescence effect, which is the mechanism by which it quenches LDH-SA. This is possible due to the inhibition of excited-state intramolecular proton transfer and photoinduced electron transfer processes within LDH-SA after incorporating Al3+. Upon interaction with glyphosate, competitive complexation between glyphosate and Al3+ is initiated, which leads to a recovery of the fluorescence spectrum of LDH-SA and demonstrating the "off-on-off" behavior. An "INHIBIT" logic gate system was devised utilizing the response, indicating potential applications in fluorescence-based devices. Such a rapid, sequential detection capacity is impressive. It attests to the utility of LDH-SA as a probe for Al3+ or glyphosate, and suggests promise for applications in pollutant analysis or environmental monitoring applications.

Development of hybrid MIL-53(Al)@CBS for ternary adsorption of tetracyclines antibiotics in water: Physical interpretation of the adsorption mechanism

In this study, a hybrid material, MIL-53(Al)@CBS, was synthesized via the solvothermal method, involving the growth of MIL-53(Al) crystals on cocoa bean shell residues (CBS). Physicochemical characterization techniques, including TGA, BET, FTIR, XRD, and SEM, confirmed successful hybridization. MIL-53(Al)@CBS was employed as an adsorbent for antibiotics (oxytetracycline, tetracycline, chlortetracycline) separation from aqueous solutions. Parameters like pH, adsorbent dose, concentration, time, and temperature were systematically evaluated. FTIR revealed π-π interactions and hydrogen bonds between tetracyclines and the adsorbent. MIL-53(Al)@CBS exhibited adsorption, with removal rates up to 98.92%, 99.04%, and 98.24% for OTC, TC, and CTC, respectively. Kinetics suggested adsorption depends on active site availability, with TC adsorbing fastest. Microscopic models showed adsorption on three distinct active site types with different affinities without competition or adherence to the Langmuir hypothesis. Importantly, MIL-53(Al)@CBS maintained high adsorption capacity even after ten washing cycles, highlighting its potential for water treatment.

Recent technologies for glyphosate removal from aqueous environment: A critical review

The growing demand for food has led to an increase in the use of herbicides and pesticides over the years. One of the most widely used herbicides is glyphosate (GLY). It has been used extensively since 1974 for weed control and is currently classified by the World Health Organization (WHO) as a Group 2A substance, probably carcinogenic to humans. The industry and academia have some disagreements regarding GLY toxicity in humans and its effects on the environment. Even though this herbicide is not mentioned in the WHO water guidelines, some countries have decided to set maximum acceptable concentrations in tap water, while others have decided to ban its use in crop production completely. Researchers around the world have employed different technologies to remove or degrade GLY, mostly at the laboratory scale. Water treatment plants combine different technologies to remove it alongside other water pollutants, in some cases achieving acceptable removal efficiencies. Certainly, there are many challenges in upscaling purification technologies due to the costs and lack of factual information about their adverse effects. This review presents different technologies that have been used to remove GLY from water since 2012 to date, its detection and removal methods, challenges, and future perspectives.

MIL-53(Al)@HC nanohybrid for bicomponent adsorption of ibuprofen and metsulfuron-methyl: Application of macro- and microscopic models and competition between contaminants

In this work, a hybrid was synthesized by hydrothermal treatment, metal-organic framework functionalized with hydrochar (MIL-53(Al)@HC) for the adsorption of two organic molecules Ibuprofen sodium salt and Metsulfuron-methyl, in binary system. The hybrid is composed of 71 wt% biomass and 29 wt% MOF. TGA, BET, FTIR, XRD and XPS characterization techniques were used to verify the hybridization of MIL-53(Al)@HC. The MIL-53(Al)@HC hybrid showed in situ MIL-53(Al) crystal growth capability. Batch adsorption experiments were carried out to study the effect of pH, adsorbent dosage, adsorbate concentration, contact time and temperature effect. The results obtained under extreme conditions demonstrate that MIL-53(Al)@HC is an adsorbent capable of removing >98% of IBU and MTM in mixture at a concentration of 0.3 mM (68 ppm IBU and 115 ppm MTM). The pseudo-second order model adequately described the adsorption kinetics and equilibrium using the Sips and Freundlich models. The physico-statistical microscopic model (2-layer) corroborated the hypothesis of a multilayer adsorption proposed by the macroscopic Freundlich model. In the competition study between IBU and MTM, both antagonistic and synergistic effects were observed. In the thermodynamic study, positive values of (ΔH°) indicate that adsorption is endothermic in nature and that the dominant mechanism is physisorption. A mechanism of adsorption by hydrogen bridging and non-covalent π*-π adsorbate-adsorbate and adsorbate-adsorbate-adsorbate interactions was proposed. The desorption study shows that in 5 washing cycles MIL-53(Al)@HC is a recoverable material.