Langmuir-monolayer methodologies for characterizing protein-lipid interactions

Advantages of the classical thermodynamic analysis of single-and multi-component Langmuir monolayers from molecules of biomedical importance-theory and applications

The Langmuir monolayer technique has been successfully used for decades to model biological membranes and processes occurring at their interfaces. Classically, this method involves surface pressure measurements to study interactions within membrane components as well as between external bioactive molecules (e.g. drugs) and the membrane. In recent years, surface-sensitive techniques were developed to investigate monolayers in situ; however, the obtained results are in many cases insufficient for a full characterization of biomolecule-membrane interactions. As result, description of systems using parameters such as mixing or excess thermodynamic functions is still relevant, valuable and irreplaceable in biophysical research. This review article summarizes the theory of thermodynamics of single- and multi-component Langmuir monolayers. In addition, recent applications of this approach to characterize surface behaviour and interactions (e.g. orientation of bipolar molecules, drug-membrane affinity, lateral membrane heterogeneity) are presented.

Dynamic conformational changes of a tardigrade group-3 late embryogenesis abundant protein modulate membrane biophysical properties

A number of intrinsically disordered proteins (IDPs) encoded in stress-tolerant organisms, such as tardigrade, can confer fitness advantage and abiotic stress tolerance when heterologously expressed. Tardigrade-specific disordered proteins including the cytosolic-abundant heat-soluble proteins are proposed to confer stress tolerance through vitrification or gelation, whereas evolutionarily conserved IDPs in tardigrades may contribute to stress tolerance through other biophysical mechanisms. In this study, we characterized the mechanism of action of an evolutionarily conserved, tardigrade IDP, HeLEA1, which belongs to the group-3 late embryogenesis abundant (LEA) protein family. HeLEA1 homologs are found across different kingdoms of life. HeLEA1 is intrinsically disordered in solution but shows a propensity for helical structure across its entire sequence. HeLEA1 interacts with negatively charged membranes via dynamic disorder-to-helical transition, mainly driven by electrostatic interactions. Membrane interaction of HeLEA1 is shown to ameliorate excess surface tension and lipid packing defects. HeLEA1 localizes to the mitochondrial matrix when expressed in yeast and interacts with model membranes mimicking inner mitochondrial membrane. Yeast expressing HeLEA1 shows enhanced tolerance to hyperosmotic stress under nonfermentative growth and increased mitochondrial membrane potential. Evolutionary analysis suggests that although HeLEA1 homologs have diverged their sequences to localize to different subcellular organelles, all homologs maintain a weak hydrophobic moment that is characteristic of weak and reversible membrane interaction. We suggest that such dynamic and weak protein-membrane interaction buffering alterations in lipid packing could be a conserved strategy for regulating membrane properties and represent a general biophysical solution for stress tolerance across the domains of life.

Unraveling Complex Hysteresis Phenomenon in 1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine Monolayer: Insight into Factors Influencing Surface Dynamics

This study explores the hysteresis phenomenon in DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) monolayers, considering several variables, including temperature, compression and expansion rates, residence time, and subphase content. The investigation focuses on analyzing the influence of these variables on key indicators such as the π-A isotherm curve, loop area, and compression modulus. By employing the Langmuir-Blodgett technique, the findings reveal that all the examined factors significantly affect the aforementioned parameters. Notably, the hysteresis loop, representing dissipated energy, provides valuable insights into the monolayer's viscoelasticity, molecular packing, phase transition changes, and resistance during the isocycle process. These findings contribute to a comprehensive understanding of the structural and dynamic properties of DPPC monolayers, offering insights into their behavior under varying conditions. Moreover, the knowledge gained from this study can aid in the development of precise models and strategies for controlling and manipulating monolayer properties, with potential applications in drug delivery systems, surface coatings, as well as further investigation into air penetration into alveoli and the blinking mechanism.

Tunable lipid-coated nanoporous silver sheet for characterization of protein-membrane interactions by surface-enhanced Raman scattering (SERS)

Membrane environments affect protein structures and functions through protein-membrane interactions in a wide range of important biological processes. To better study the effects from the lipid's hydrophilic and hydrophobic interaction with protein on different membrane regions, we developed the lipid-coated nanoporous silver sheets to provide tunable supported lipid monolayer/bilayer environments for in situ surface-enhanced Raman vibrational spectroscopy (SERS) characterizations. Under the controllable surface pressure, lipid monolayer/bilayer was coated along the microscopic curved surface of nanoporous silver sheets to serve as a cell membrane mimic as well as a barrier to avoid protein denaturation while empowering the high SERS enhancements from the underlying metallic bases allowing detection sensitivity at low physiological concentrations. Moreover, we fine-tuned the lipid packing density and controlled the orientation of the deposited lipid bilayers and monolayers to directly monitor the protein structures upon interactions with various membrane parts/positions. Our results indicate that lysozyme adopted the α-helical structure in both hydrophilic and hydrophobic interaction with lipid membrane. Interestingly, alpha-synuclein folded into the α-helical structure on the negatively charged lipid heads, whereas the hydrophobic lipid tails induced the β-sheet structural conversion of alpha-synuclein originated from its unstructured monomers. These direct observations on protein hydrophilic and hydrophobic interaction with lipid membrane might provide profound insights into the formation of the β-sheet-containing alpha-synuclein oligomers for further membrane disruptions and amyloid genesis associated with Parkinson's disease. Hence, with the controllability and tunability of lipid environments, our platform holds great promise for more general applications in investigating the influences from membranes and the correlative structures of proteins under both hydrophilic and hydrophobic effects.

HIV-1 Gag specificity for PIP2 is regulated by macromolecular electric properties of both protein and membrane local environments

HIV-1 assembly occurs at the plasma membrane, with the Gag polyprotein playing a crucial role. Gag association with the membrane is directed by the matrix domain (MA), which is myristoylated and has a highly basic region that interacts with anionic lipids. Several pieces of evidence suggest that the presence of phosphatidylinositol-(4,5)-bisphosphate (PIP₂) highly influences this binding. Furthermore, MA also interacts with nucleic acids, which is proposed to be important for the specificity of GAG for PIP₂-containing membranes. It is hypothesized that RNA has a chaperone function by interacting with the MA domain, preventing Gag from associating with unspecific lipid interfaces. Here, we study the interaction of MA with monolayer and bilayer membrane systems, focusing on the specificity for PIP₂ and on the possible effects of a Gag N-terminal peptide on impairing the binding for either RNA or membrane. We found that RNA decreases the kinetics of the protein association with lipid monolayers but has no effect on the selectivity for PIP₂. Interestingly, for bilayer systems, this selectivity increases in presence of both the peptide and RNA, even for highly negatively charged compositions, where MA alone does not discriminate between membranes with or without PIP₂. Therefore, we propose that the specificity of MA for PIP₂-containing membranes might be related to the electrostatic properties of both membrane and protein local environments, rather than a simple difference in molecular affinities. This scenario provides a new understanding of the regulation mechanism, with a macromolecular view, rather than considering molecular interactions within a ligand-receptor model.

Dexamethasone and Dexamethasone Phosphate: Effect on DMPC Membrane Models

Dexamethasone (Dex) and Dexamethasone phosphate (Dex-P) are synthetic glucocorticoids with high anti-inflammatory and immunosuppressive actions that gained visibility because they reduce the mortality in critical patients with COVID-19 connected to assisted breathing. They have been widely used for the treatment of several diseases and in patients under chronic treatments, thus, it is important to understand their interaction with membranes, the first barrier when these drugs get into the body. Here, the effect of Dex and Dex-P on dimyiristoylphophatidylcholine (DMPC) membranes were studied using Langmuir films and vesicles. Our results indicate that the presence of Dex in DMPC monolayers makes them more compressible and less reflective, induces the appearance of aggregates, and suppresses the Liquid Expanded/Liquid Condensed (LE/LC) phase transition. The phosphorylated drug, Dex-P, also induces the formation of aggregates in DMPC/Dex-P films, but without disturbing the LE/LC phase transition and reflectivity. Insertion experiments demonstrate that Dex induces larger changes in surface pressure than Dex-P, due to its higher hydrophobic character. Both drugs can penetrate membranes at high lipid packings. Vesicle shape fluctuation analysis shows that Dex-P adsorption on GUVs of DMPC decreases membrane deformability. In conclusion, both drugs can penetrate and alter the mechanical properties of DMPC membranes.

Regulation of calcium ions on the interaction between amphotericin B and cholesterol-rich phospholipid monolayer in LE phase and LC phase

Amphotericin B, as a "gold standard", is used to treat invasive fungal infections. The AmB molecule can bind easily to cholesterol and damage cell membranes, so it produces the toxicity on cell membrane, which limits its clinical dose. However, the interaction between AmB and cholesterol-rich membrane is unclear now. The phase state of the membrane and the metal cation outside cell membrane may affect the interaction between AmB and the membrane. In this work, the effects of amphotericin B on the mean molecular area, elastic modulus and stability of mammalian cell membrane rich in cholesterol in the presence of Ca²⁺ ions were studied using DPPC/Chol mixed Langmuir monolayer as a model. The Langmuir-Blodgett method and AFM test were used to study the effects of this drug on the morphology and height of cholesterol-rich phospholipid membrane in the presence of Ca²⁺ ions. The influence of calcium ions on the mean molecular area and the limiting molecular area was similar in LE phase and in LC phase. The calcium ions made the monolayer more condensed. However, calcium ions can weaken the shortening effect of AmB on the relaxation time of the DPPC/Chol mixed monolayer in LE phase but enhance it in LC phase. Interestingly, calcium ions caused a LE-LC coexistence phase to occur in the DPPC/Chol/AmB mixed monolayers at 35mN/m, which was confirmed by atomic force microscopy. The results can help to understand the interaction between amphotericin B and cell membrane rich in cholesterol in the calcium ions environment.

Probing the interactions between amyloidogenic proteins and bio-membranes

Protein misfolding diseases (PMDs) in humans are characterized by the deposition of protein aggregates in tissues, including Alzheimer's disease, Parkinson's disease, type 2 diabetes, and amyotrophic lateral sclerosis. Misfolding and aggregation of amyloidogenic proteins play a central role in the onset and progression of PMDs, and these processes are regulated by multiple factors, especially the interaction between proteins and bio-membranes. Bio-membranes induce conformational changes in amyloidogenic proteins and affect their aggregation; on the other hand, the aggregates of amyloidogenic proteins may cause membrane damage or dysfunction leading to cytotoxicity. In this review, we summarize the factors that affect the binding of amyloidogenic proteins and membranes, the effects of bio-membranes on the aggregation of amyloidogenic proteins, mechanisms of membrane disruption by amyloidogenic aggregates, technical approaches for detecting these interactions, and finally therapeutic strategies targeting membrane damage caused by amyloidogenic proteins.

Study of Interactions between Saponin Biosurfactant and Model Biological Membranes: Phospholipid Monolayers and Liposomes

The aim of this study was to determine the effect of saponins-rich plant extract on two model biological membranes: phospholipid monolayers and liposomes. The Langmuir monolayer technique was used to study the interactions of model phospholipid membranes with saponins. The π-A isotherms were determined for DPPE (1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine) monolayer with the addition of various concentrations of licorice saponins extracts and subjected to qualitative as well as quantitative analysis. Additionally, relaxation studies of the obtained monolayers were carried out and morphological changes were examined using Brewster angle microscopy. Moreover, changes in the structure of phospholipid vesicles treated with solutions of saponins-rich plant extracts were assessed using the FTIR technique. The size and zeta potential of the liposomes were estimated based on DLS methods. The obtained results indicated that the saponins interact with the phospholipid membrane formed by DPPE molecules and that the stability of the mixed DPPE/saponins monolayer strongly depends on the presence of impurities in saponins. Furthermore, it was found that the plant extract rich in saponins biosurfactant interacts mainly with the hydrophilic part of liposomes.

Effect of partial O-methylation in dehydrodieugenol on its antitrypanosomal activity - correlation with the toxicity using cell membrane models

Biseugenol (1), a neolignan with antiprotozoal activity against Trypanosoma cruzi, was partially methylated, and the compound obtained - methyl biseugenol (2) - had its activity evaluated against the extracellular (trypomastigotes) and intracellular (amastigotes) forms of T. cruzi. It was observed that both compounds 1 and 2 exhibited similar effects against trypomastigotes (IC₅₀ of 11.7 and 16.2 μM, respectively), whereas compound 2 displayed higher activity against amastigotes (IC₅₀ = 8.2 μM) in comparison with biseugenol (IC₅₀ = 15.4 μM). Additionally, reduced toxicity against NCTC cells for compound 2 was observed (CC₅₀ > 200 μM), differently from compound 1 with CC₅₀ = 58.0 μM. Aiming to understand better the molecular mechanism of the biological action of compound 2, the prodrug was incorporated into cellular membrane models constituted of Langmuir monolayers of the lipids dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylethanolamine (DPPE), dipalmitoylphosphatidylserine (DPPS), and dipalmitoylphosphatidylglycerol (DPPG). The lipid-drug interaction was inferred through tensiometry, surface potential, infrared spectroscopy (PM-IRRAS), and Brewster angle microscopy (BAM). The prodrug expanded DPPC and DPPG monolayers and condensed DPPE ones, as well as presented characteristic behaviors regarding the chemical structure of the lipid considering expansion-compression curves, surface potential-area isotherms, and stability of previously compressed monolayers to relevant-biological surface pressures. PM-IRRAS indicated a molecular disorder for DPPC and DPPS alkyl chains in the presence of the drug. BAM revealed the presence of domains in the DPPG and DPPE monolayers, which was probably induced by the prodrug. These data suggest, in general, that the lipid composition modulates the interaction of compound 2, whose results are expected to correlate to its trypanocidal activity, which involves the plasma membrane of T. cruzi as the primary target, i.e., the first barrier that the compound should encounter to interact with the microorganism.

Towards understanding the binding affinity of lipid drug carriers to serum albumin

In the past several years there has been a rapid rise in the use of lipid-based drug formulations. In the case of intravenous drug administration the interaction of lipid carrier with serum albumin is crucial for the distribution of the bioactive molecules in the bloodstream and reaching the target tissue. In this work, we have explored the interaction of serum albumin with three-component lipid monolayer build of palmitoyloleoylphosphatidylcholine (POPC), sphingomyelin (SM), and cholesterol (Chol). Using wide range of lipid compositions and various concentrations of serum albumin we identified the factors governing the lipid-protein binding. Our study revealed that albumin can penetrate selectively the monolayers of POPC/SM/Chol depending on the lipid composition in the mixture. Moreover, the interaction of albumin with monolayer can be controlled by the molecular density of the film and the concentration of protein. The adsorbed albumin exists in the film on the top of lipid monolayer. This behavior may lead to the increase of the size and charge of the lipid carrier and affect the drug transport throughout the bloodstream. The results of this work provide essential physicochemical data that can be used for predicting the pharmacokinetic profile of lipid-based formulations.

Favourable Interfacial Characteristics of A2 Milk Protein Monolayer

Shielding of the specific body organ using the biocompatible material helps preventing direct exposure of that part to the foreign entities responsible for infections. Here we show the potential of the A2 milk protein recovered from the milk of cow from Indian origin for possible prevention of the direct exposure to other foreign molecules. We measured the surface pressure of the monolayers of different types of protein samples using Langmuir isotherm experiments. The surface pressure measurements for the monolayer of four types of protein macromolecules have been carried out using the Wilhelmy plate micro pressure sensor. We studied the self-organization of different protein macromolecules and their monolayer compression characteristics. The electrochemical behaviour is studied using electrochemical impedance spectroscopy. We found the highest surface pressure for the monolayer of A2 protein. Further, it is also found that A2 protein exhibited the highest surface activity amongst the other proteins. This property can be effectively used for making the envelope of the A2 protein surrounding the targeted entity.

Incorporation of dehydrodieugenol, a neolignan isolated from Nectandra leucantha (Lauraceae), in lipid Langmuir monolayers as biomembrane models

Dehydrodieugenol, a neolignan isolated from the Brazilian plant Nectandra leucantha (Lauraceae) with reported antiprotozoal and anticancer activity, was incorporated in Langmuir monolayers of selected lipids as cell membrane models, aiming to comprehend its action mechanism at the molecular level. The interaction of this compound with the lipids dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylethanolamine (DPPE), dipalmitoylphosphatidylserine (DPPS), and dipalmitoylphosphatidylglycerol (DPPG) was inferred through tensiometry, infrared spectroscopy, and Brewster angle microscopy. The interactions had different effects depending on the chemical nature of the lipid polar head, with expansion for DPPC monolayers, condensation for DPPE, and expansion (at low surface pressures) followed by the overlap of the isotherms (at high surface pressure values) for DPPS and DPPG. Effects caused by dehydrodieugenol in the negatively charged lipids were distinctive, which was also reflected in the hysteresis assays, surface potential-area isotherms, and rheological measurements. Infrared spectroscopy indicated that the drug interaction with the monolayer affects not only the polar groups, but also the acyl lipid chains for all lipids. These results pointed to the fact that the interaction of the drug with lipid monolayers at the air-water interface is modulated by the lipid composition, mainly considering the polar head of the lipids, as well as the hydrophobicity of the lipids and the drug. As negatively charged lipids pointed to distinctive interaction, we believe this can be related to the antiprotozoal and anticancer properties of the compound.

Influence of cytochrome P450 3A4 and membrane lipid composition on doxorubicin activity

Drug resistance is known to depend on the interactions with cell membranes and other molecules such as human cytochromes P450 (CYPs) which are anchored on the endoplasmic reticulum (ER) membrane and involved in the metabolism of anticancer drugs. In this study, we determined the influence from cytochrome P450 3A4 (CYP3A4) on the interaction between the drug doxorubicin (DOX) and Langmuir monolayers mimicking cell membranes. The lipid composition was varied by changing the relative concentrations of cholesterol (Chol), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and L-α-phosphatidylinositol (PI). Three compositions were studied in detail which represented a healthy cell membrane and cancerous cell membranes. DOX induced an expansion in the surface pressure isotherms for all monolayers, with stronger effect for the composition of cancerous cell with a high Chol content, thus confirming the relevance of lipid composition. This effect decreased considerably when CYP3A4 was incorporated with the formation of CYP3A4-DOX complexes, according to results from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) measurements. Taken together, these results support the hypothesis of CYP3A4 being involved in drug resistance, which may be exploited to design strategies to enhance chemotherapy efficacy.

Penicillin-binding proteins (PBPs) determine antibiotic action in Langmuir monolayers as nanoarchitectonics mimetic membranes of methicillin-resistant Staphylococcus aureus

The membrane of methicillin-resistant Staphylococcus aureus (MRSA) contains penicillin-binding proteins (PBPs) in the phospholipidic bilayer, with the protein PBP2a being linked with the resistance mechanism. In this work we confirm the role of PBP2a with molecular-level information obtained with Langmuir monolayers as cell membrane models. The MRSA cell membrane was mimicked with a mixed monolayer of dipalmitoyl phosphatidyl glycerol (DPPG) and cardiolipin (CL), also incorporating PBP2a. The surface pressure-area isotherms and the Brewster angle microscopy (BAM) images for these mixed monolayers were significantly affected by the antibiotic meropenem, which is PBP2a inhibitor. The meropenem effects were associated with the presence of PBP2a, as they were absent in the Langmuir monolayers without PBP2a. The relevance of PBP2a was confirmed with results where the antibiotic methicillin, known to be unsuitable to kill MRSA, had the same effects on mixed DPPG/CL and DPPG/CL-PBP2a monolayers since it prevented PBP2a from incorporating in the monolayer. The biological implication of the findings presented here is that a successful antibiotic against MRSA should be able to interact with PBP2a, but in the membrane.

Spontaneous and Ion-Specific Formation of Inverted Bilayers at Air/Aqueous Interface

Developing better separation technologies for rare earth metals, an important aspect of a sustainable materials economy, is challenging due to their chemical similarities. Identifying molecular-scale interactions that amplify the subtle differences between the rare earths can be useful in developing new separation technologies. Here, we describe the ion-dependent monolayer to inverted bilayer transformation of extractant molecules at the air/aqueous interface. The inverted bilayers form with Lu³⁺ ions but not with Nd³⁺. By introducing Lu³⁺ ions to preformed monolayers, we extract kinetic parameters corresponding to the monolayer to inverted bilayer conversion. Temperature-dependent studies show Arrhenius behavior with an energy barrier of 40 kcal/mol. The kinetics of monolayer to inverted bilayer conversion is also affected by the character of the background anion, although anions are expected to be repelled from the interface. Our results show the outsized importance of ion-specific effects on interfacial structure and kinetics, pointing to their role in chemical separation methods.

1,3 Dialkylated Imidazolium Ionic Liquid Causes Interdigitated Domains in a Phospholipid Membrane

Amphiphilic imidazolium-based ionic liquids (ILs) have proven their efficacy in altering the membrane integrity and dynamics. The present article investigates the phase-separated domains in a 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) membrane induced by 1,3 dialkylated imidazolium IL. Isotherm measurements on DPPC monolayers formed at the air-water interface have shown a decrease in the mean molecular area with the addition of this IL. The positive value of the excess Gibbs free energy of mixing indicates an unfavorable mixing of the IL into the lipid. This leads to IL-induced phase-separated domains in the multilayer of the lipid confirmed by the occurrence of two sets of equidistance peaks in the X-ray reflectivity data. The electron density profile along the surface normal obtained by the swelling method shows the bilayer thickness of the newly formed IL-rich phase to be substantially lower (∼34 Å) than the DPPC phase (∼45.8 Å). This IL-rich phase has been confirmed to be interdigitated, showing an enhanced electron density in the tail region due to the overlapping hydrocarbon chains. Differential scanning calorimetry measurements showed that the incorporation of IL enhances the fluidity of the lipid bilayer. Therefore, the study indicates the formation of an interdigitated phase with a lower order compared to the gel phase in the DPPC membrane supplemented with the IL.

Interaction of cyclotide Kalata B1 protein with model cellular membranes of varied electrostatics

A uni-molecular layer of lipids at air-water interface mimicking one of the leaflets of the cellular membrane provides a simple model to understand the interaction of any foreign molecules with the membrane. Here, the interactions of protein Kalata B1 (KB1) of cyclotide family with the phospholipids 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) sodium salt (DPPG), and 1,2-distearoyl-sn-glycero-3-ethylphosphocholine chloride salt (DSEPC) have been investigated. The addition of KB1 induces a change in pressure of the lipid monolayers. The characteristic time of the change in pressure is found to be dependent on the electrostatic nature of the lipid. Even though the protein is weakly surface active, it is capable of modifying the phase behavior and elastic properties of lipid monolayers with differences in their strength and nature making the layers more floppy. The KB1-lipid interaction has been quantified by calculating the excess Gibb's free energy of interaction and the 1-anilino-8-naphthalenesulfonate (ANS) binding studies. The interaction with zwitterionic DPPC and negatively charged DPPG lipids are found to be thermodynamically favorable whereas the protein shows a weaker response to positively charged DSEPC lipid. Therefore, the long ranged electrostatic is the initial driving force for the KB1 to recognize and subsequently attach to a cellular membrane. Thereafter, the hydrophobic region of the protein may penetrate into the hydrophobic core of the membrane via specific amino acid residues.

Chitosan effects on monolayers of zwitterionic, anionic and a natural lipid extract from E. coli at physiological pH

Langmuir monolayers are used to simulate the biological membrane environment, acting as a mimetic system of the outer or the inner membrane leaflet. Herein, we analyze the interaction of membrane models with a partially N-acetylated chitosan (Ch35%) possessing a quasi-ideal random pattern of acetylation, full water solubility up to pH ≈ 8.5 and unusually high weight average molecular weight. Lipid monolayers containing dipalmitoyl phosphatidyl choline (DPPC), dipalmitoyl phosphatidyl ethalonamine (DPPE), dipalmitoyl phosphatidyl glycerol (DPPG) or E. coli total lipid extract were spread onto subphases buffered at pH 4.5 or 7.4. The incorporation of Ch35% chitosan caused monolayer expansion and a general trend of decreasing monolayer rigidity with Ch35% concentration. Due to its relatively high content of N-acetylglucosamine (GlcNAc) units, Ch35% interactions with negatively charged monolayers and with E. coli extract were weaker than those involving zwitterionic monolayers or lipid rafts. While the smaller interaction with negatively charged lipids was unexpected, this finding can be attributed to the degree of acetylation (35%) which imparts a small number of charged groups for Ch35% to interact. Chitosan properties are therefore determinant for interactions with model cell membranes, which explains the variability in chitosan bactericide activity in the literature. This is the first study on the effects from chitosans on realistic models of bacterial membranes under physiological pH.

Physical behavior of KR-12 peptide on solid surfaces and Langmuir-Blodgett lipid films: Complementary approaches to its antimicrobial mode against S. aureus

Biophysical characterization of antimicrobial peptides helps to understand the mechanistic aspects of their action. The physical behavior of the KR-12 antimicrobial peptide (e.g. orientation and changes in secondary structure), was analyzed after interactions with a Staphylococcus aureus membrane model and solid surfaces. We performed antimicrobial tests using Gram-positive S. aureus (ATCC 25923) bacteria. Moreover, Langmuir-Blodgett experiments showed that the synthetic peptide can disturb the lipidic membrane at a concentration lower than the Minimum Inhibitory Concentration, thus confirming that KR-12/lipid interactions are involved. Partially- and fully-deactivated KR-12 hybrid samples were obtained by physisorption and covalent immobilization in chitosan/silica and glyoxal-rich solid supports. The correlation of Langmuir-Blodgett data with the α-helix formation, followed by FTIR-ATR in a frozen-like state, and the antimicrobial activity showed the importance of these interactions and conformation changes on the first step action mode of this peptide. This is the first time that material science (immobilization in solid surfaces assisted by FTIR-ATR analysis in frozen-like state) and physical (Langmuir-Blodgett/Schaefer) approaches are combined for exploring mechanistic aspects of the primary action mode of the KR-12 antimicrobial peptide against S. aureus.

Langmuir Monolayer Techniques for the Investigation of Model Bacterial Membranes and Antibiotic Biodegradation Mechanisms

The amounts of antibiotics of anthropogenic origin released and accumulated in the environment are known to have a negative impact on local communities of microorganisms, which leads to disturbances in the course of the biodegradation process and to growing antimicrobial resistance. This mini-review covers up-to-date information regarding problems related to the omnipresence of antibiotics and their consequences for the world of bacteria. In order to understand the interaction of antibiotics with bacterial membranes, it is necessary to explain their interaction mechanism at the molecular level. Such molecular-level interactions can be probed with Langmuir monolayers representing the cell membrane. This mini-review describes monolayer experiments undertaken to investigate the impact of selected antibiotics on components of biomembranes, with particular emphasis on the role and content of individual phospholipids and lipopolysaccharides (LPS). It is shown that the Langmuir technique may provide information about the interactions between antibiotics and lipids at the mixed film surface (π–A isotherm) and about the penetration of the active substances into the phospholipid monolayer model membranes (relaxation of the monolayer). Effects induced by antibiotics on the bacterial membrane may be correlated with their bactericidal activity, which may be vital for the selection of appropriate bacterial consortia that would ensure a high degradation efficiency of pharmaceuticals in the environment.

Interactions between the Cell Membrane Repair Protein S100A10 and Phospholipid Monolayers and Bilayers

Protein S100A10 participates in different cellular mechanisms and has different functions, especially at the membrane. Among those, it forms a ternary complex with annexin A2 and the C-terminal of AHNAK and then joins the dysferlin membrane repair complex. Together, they act as a platform enabling membrane repair. Both AHNAK and annexin A2 have been shown to have membrane binding properties. However, the membrane binding abilities of S100A10 are not clear. In this paper, we aimed to study the membrane binding of S100A10 in order to better understand its role in the cell membrane repair process. S100A10 was overexpressed by E. coli and purified by affinity chromatography. Using a Langmuir monolayer as a model membrane, the binding parameters and ellipsometric angles of the purified S100A10 were measured using surface tensiometry and ellipsometry, respectively. Phosphorus-31 solid-state nuclear magnetic resonance spectroscopy was also used to study the interaction of S100A10 with lipid bilayers. In the presence of a lipid monolayer, S100A10 preferentially interacts with unsaturated phospholipids. In addition, its behavior in the presence of a bilayer model suggests that S100A10 interacts more with the negatively charged polar head groups than the zwitterionic ones. This work offers new insights on the binding of S100A10 to different phospholipids and advances our understanding of the parameters influencing its membrane behavior.

Recent Progress of DNA Nanostructures on Amphiphilic Membranes

Employing DNA nanostructures mimicking membrane proteins on artificial amphiphilic membranes have been widely developed to understand the structures and functions of the natural membrane systems. In this review, the recent developments in artificial systems constructed by amphiphilic membranes and DNA nanostructures are summarized. First, the preparations and properties of the amphipathic bilayer models are introduced. Second, the interactions are discussed between the membrane and the DNA nanostructures, as well as their coassembly behaviors. Next, the alternative systems related to membrane protein-mediated signal transmission, selective distribution, transmembrane channels, and membrane fusion are also introduced. Moreover, the constructions of membrane skeleton protein-mimicking DNA nanostructures are also highlighted.

Nanomaterials fusing with the skin: Alpha-tocopherol phosphate delivery into the viable epidermis to protect against ultraviolet radiation damage

Vitamin E (alpha tocopherol, α-T) is an important skin antioxidant, but its penetration into the viable epidermis, where it acts, is very limited. This study investigated if phosphorylating α-tocopherol (α-TP) to form a provitamin, improved its interactions with skin, its passage into the tissue, and thus its ability to protect the skin from ultraviolet radiation (UVR) damage. At pH 7.4, when the α-TPO₄^-1 microspecies predominated in solution, dynamic light scattering measurements showed that α-TP formed nanoaggregates with a median hydrodynamic diameter of 9 nm (Critical aggregation constant, CAC, - 4.2 mM). At 9.0 when the α-TPO₄^-2 microspecies predominated there was no aggregation. The passage of α-TP nanoaggregates through regenerated cellulose membranes was significantly slower than the α-TP monomers (at pH 9) suggesting that aggregation slowed diffusion. However, a lotion formulation containing the nanoaggregates delivered more α-TP into the skin compared to the formulation containing the monomers. In addition, the nanosized α-TP aggregates delivered 8-fold more active into the stratum corneum (SC) (252.2 μg/cm² vs 29.5 μg/cm²) and 4 fold more active into the epidermis (85.1 μg/cm² vs 19 μg/cm², respectively, p < 0.05) compared to α-T. Langmuir subphase injection studies at pH 7.4 (surface pressure 10 mN m^-1) showed that the α-TP nanoaggregates more readily fused with the SC compared to the monomers and the membrane compression studies demonstrated that α-TP fluidised the SC lipids. Together the fusion with the SC and its fluidisation were proposed as the causes of the better α-TP penetration into the skin, which enhanced potential of α-TP to protect from UVR-induced skin damage compared to α-T.

Mimicking the Mammalian Plasma Membrane: An Overview of Lipid Membrane Models for Biophysical Studies

Cell membranes are very complex biological systems including a large variety of lipids and proteins. Therefore, they are difficult to extract and directly investigate with biophysical methods. For many decades, the characterization of simpler biomimetic lipid membranes, which contain only a few lipid species, provided important physico-chemical information on the most abundant lipid species in cell membranes. These studies described physical and chemical properties that are most likely similar to those of real cell membranes. Indeed, biomimetic lipid membranes can be easily prepared in the lab and are compatible with multiple biophysical techniques. Lipid phase transitions, the bilayer structure, the impact of cholesterol on the structure and dynamics of lipid bilayers, and the selective recognition of target lipids by proteins, peptides, and drugs are all examples of the detailed information about cell membranes obtained by the investigation of biomimetic lipid membranes. This review focuses specifically on the advances that were achieved during the last decade in the field of biomimetic lipid membranes mimicking the mammalian plasma membrane. In particular, we provide a description of the most common types of lipid membrane models used for biophysical characterization, i.e., lipid membranes in solution and on surfaces, as well as recent examples of their applications for the investigation of protein-lipid and drug-lipid interactions. Altogether, promising directions for future developments of biomimetic lipid membranes are the further implementation of natural lipid mixtures for the development of more biologically relevant lipid membranes, as well as the development of sample preparation protocols that enable the incorporation of membrane proteins in the biomimetic lipid membranes.

Interactions of anticancer drugs doxorubicin and idarubicin with lipid monolayers: New insight into the composition, structure and morphology

We quantify directly here for the first time the extents of interactions of two different anthracycline drugs with pure and mixed lipid monolayers with respect to the surface pressure and elucidate differences in the resulting interaction mechanisms. The work concerns interactions of doxorubicin (DOx) and idarubicin (IDA) with monolayers of the zwitterionic DMPC (1,2-dimyristoyl-sn-glycero-3-phosphocholine) and negatively charged DMPS (1,2-dimyristoyl-sn-glycero-3-phospho-L-serine (sodium salt)) as well as a 7:3 mixture of the two lipids. These drugs are used in current cancer treatments, while the lipid systems were chosen as phosphocholines are the major lipid component of healthy cell membranes, and phosphoserines are the major lipid component that is externalized into the outer leaflet of cancerous cell membranes. It is shown that DOx interacts with DMPS monolayers to a greater extent than with DMPC monolayers by lower limits of a factor of 5 at a surface pressure of 10 mN/m and a factor of 12 at 30 mN/m. With increasing surface pressure, the small amount of drug (~0.3 µmol/m²) bound to DMPC monolayers is excluded from the interface, yet its interaction with DMPS monolayers is enhanced until there is even more drug (~3.2 µmol/m²) than lipid (~2.6 µmol/m²) at the interface. Direct evidence is presented for all systems studied that upon surface area compression lipid is reproducibly expelled from the monolayer, which we infer to be in the form of drug-lipid aggregates, yet the nature of adsorption of material back to the monolayer upon expansion is system-dependent. At 30 mN/m, most relevant to human physiology, the interactions of DOx and IDA are starkly different. For DOx, there is a conformational change in the interfacial layer driven by aggregation, resulting in the formation of lateral domains that have extended layers of drug. For the more lipophilic IDA, there is penetration of the drug into the hydrophobic acyl chain region of the monolayer and no indication of lateral segregation. In addition to the Langmuir technique, these advances were made as a result of direct measurements of the interfacial composition, structure and morphology using two different implementations of neutron reflectometry and Brewster angle microscopy. The results provide new insight into key processes that determine the uptake of drugs such as limited drug penetration through cell membranes by passive diffusion as well as activation of drug removal mechanisms related to multidrug resistance.

Study of the Mechanism of the Antimicrobial Activity of Novel Water Soluble Ammonium Quaternary Benzanthrone on Model Membranes

The increasing resistance of many pathogens to most of the common antimicrobials requires the development of new substances with more effective antimicrobial properties. In the present work, we investigated the mechanism of the antimicrobial activity of novel water soluble ammonium quaternary benzanthrone (Compound B) on model membranes, composed of dipalmitoylphosphatidylcholine, 1-palmitoyl-2-oleoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, 1-palmitoyl-2-oleoylphosphatidylglycerol, and dipalmitoylphosphatidylethanolamine (DPPE). The lipids were chosen to represent a model of a bacterial membrane. The changes in surface pressure of the model membranes, before and after the addition of Compound B, were studied by the Langmuir's monolayer method, and the compressional modulus for each monolayer was determined. In addition, the surface morphology of the lipid monolayers before and after injection of Compound B was monitored by Brewster Angle Microscopy. The results showed that Compound B penetrated all the monolayers studied. The most noticeable effects were found with the negatively charged phosphatidylglycerols and with DPPE leading to the conclusion that the electrostatic interactions between the compound and the lipid head groups and the possible formation of hydrogen bonds between the amino group of the ethanolamine and the keto groups in the structure of Compound B are of great importance. In addition, the penetration ability of the benzoquinone with all phospholipids studied was stable even at higher values of the surface pressure, i.e. thicker monolayers, due to the hydrophobic interaction, which plays also an important role for the antimicrobial activity of Compound B.

Design and use of model membranes to study biomolecular interactions using complementary surface-sensitive techniques

Cellular membranes are complex structures and simplified analogues in the form of model membranes or biomembranes are used as platforms to understand fundamental properties of the membrane itself as well as interactions with various biomolecules such as drugs, peptides and proteins. Model membranes at the air-liquid and solid-liquid interfaces can be studied using a range of complementary surface-sensitive techniques to give a detailed picture of both the structure and physicochemical properties of the membrane and its resulting interactions. In this review, we will present the main planar model membranes used in the field to date with a focus on monolayers at the air-liquid interface, supported lipid bilayers at the solid-liquid interface and advanced membrane models such as tethered and floating membranes. We will then briefly present the principles as well as the main type of information on molecular interactions at model membranes accessible using a Langmuir trough, quartz crystal microbalance with dissipation monitoring, ellipsometry, atomic force microscopy, Brewster angle microscopy, Infrared spectroscopy, and neutron and X-ray reflectometry. A consistent example for following biomolecular interactions at model membranes is used across many of the techniques in terms of the well-studied antimicrobial peptide Melittin. The overall objective is to establish an understanding of the information accessible from each technique, their respective advantages and limitations, and their complementarity.

Role of Toluidine Blue-O Binding Mechanism for Photooxidation in Bioinspired Bacterial Membranes

The alarming increase in bacterial resistance to antibiotics has demanded new strategies for microbial inactivation, which include photodynamic therapy whose activity relies on the photoreaction damage to the microorganism membrane. Herein, the binding mechanisms of the photosensitizer toluidine blue-O (TBO) on simplified models of bacterial membrane with Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) and 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG) were correlated to the effects of the photoinduced lipid oxidation. Langmuir monolayers of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) were also used as a reference of mammalian membranes. The surface pressure isotherms combined with polarization-modulated infrared reflection absorption spectroscopy revealed that TBO expands DOPC, DOPE, and DOPG monolayers owing to electrostatic interactions with the negatively charged groups in the phospholipids, with a stronger adsorption on DOPG, which has a net surface charge. Light irradiation made the TBO-containing DOPC and DOPE monolayers less unstable as a result of the singlet oxygen (¹O₂) reaction with the chain unsaturation and hydroperoxide formation. In contrast, the decreased stability of the irradiated TBO-containing DOPG monolayer suggests the cleavage of carbon chains. The anionic nature of DOPG allowed a deeper penetration of TBO into the chain region, favoring contact-dependent reactions between the excited triplet state of TBO and lipid unsaturations or/and hydroperoxide groups, which is the key for the cleavage reactions and further membrane permeabilization.

Studies on the Interactions of 2-Hydroxyoleic Acid with Monolayers and Bilayers Containing Cationic Lipid: Searching for the Formulations for More Efficient Drug Delivery to Cancer Cells

Drug delivery in cationic liposomes seems to be a promising therapeutic approach in cancer treatment. The rational design of the positively charged lipid vesicles as anticancer drug carriers should be supported by a detailed analysis of the interactions of the carrier components with anticancer drugs. In the present work, 2-hydroxyoleic acid (2OHOA; Minerval), a membrane lipid therapy drug, was incorporated into positively charged mono- and bilayer membranes containing 1-palmitoyl-2-oleoyl- sn-glycero-3-ethylphosphocholine (EPOPC), the synthetic cationic lipid, and 1,2-dioleoyl- sn-glycero-3-phosphocholine (DOPC). The intermolecular interactions, fluidity, and miscibility of the studied monolayers were analyzed by utilizing Langmuir balance experiments. The morphology of two-dimensional films was inspected using a Brewster angle microscopy technique. The properties of the liposomes were investigated by dynamic light scattering (DLS) and zeta potential measurements, steady-state fluorescence anisotropy experiments, and the spectrofluorimetric titration of calcein-encapsulated vesicles with a lysis-inducing agent. According to the collected results, 2OHOA intercalation into films of pure phospholipids or a binary EPOPC/DOPC film is thermodynamically favorable. Surprisingly, no significant effect of the presence of unsaturated 2OHOA chains on the EPOPC/DOPC monolayer order was observed. The experiments carried out for 2OHOA-inserted cationic EPOPC/DOPC (1:4) liposomes indicate effective incorporation of the drug into the liposome bilayer and the formation of stable vesicles without affecting their properties markedly. On the basis of the obtained results, EPOPC/DOPC/2OHOA cationic liposomes with 15% 2OHOA content in the phospholipid bilayer seem to be the most suitable for potential biomedical applications.

Evaluation of EGCG Loading Capacity in DMPC Membranes

Catechins are molecules with potential use in different pathologies such as diabetes and cancer, but their pharmaceutical applications are often hindered by their instability in the bloodstream. This issue can be circumvented using liposomes as their nanocarriers for in vivo delivery. In this work, we studied the molecular details of (-)-epigallocatechin-3-gallate (EGCG) interacting with 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) monolayer/bilayer systems to understand the catechin loading ability and liposome stability, using experimental and computational techniques. The molecular dynamics simulations show the EGCG molecules deep inside the lipid bilayer, positioned below the lipid ester groups, generating a concentration-dependent lipid condensation. This effect was also inferred from the surface pressure isotherms of DMPC monolayers. In the polarization-modulated infrared reflection absorption spectra assays, the predominant effect at higher concentrations of EGCG (e.g., 20 mol %) was an increase in lipid tail disorder. The steady-state fluorescence data confirmed this disordered state, indicating that the catechin-induced liposome aggregation outweighs the condensation effects. Therefore, by adding more than 10 mol % EGCG to the liposomes, a destabilization of the vesicles occurs with the ensuing release of entrapped catechins. The loading capacity for DMPC seems to be limited by its disordered lipid arrangements, typical of a fluid phase. To further increase the clinical usefulness of liposomes, lipid bilayers with more stable and organized assemblies should be employed to avoid aggregation at large concentrations of catechin.

Endosomal pH favors shedding of membrane-inserted amyloid-β peptide

Amyloid-β peptides (Aβs) are generated in a membrane-embedded state by sequential processing of amyloid precursor protein (APP). Although shedding of membrane-embedded Aβ is essential for its secretion and neurotoxicity, the mechanism behind shedding regulation is not fully elucidated. Thus, we devised a Langmuir film balance-based assay to uncover this mechanism. We found that Aβ shedding was enhanced under acidic pH conditions and in lipid compositions resembling raft microdomains, which are directly related to the microenvironment of Aβ generation. Furthermore, Aβ shedding efficiency was determined by the length of the C-terminal membrane-spanning region, whereas pH responsiveness appears to depend on the N-terminal ectodomain. These findings indicate that Aβ shedding may be directly coupled to its generation and represents an unrecognized control mechanism regulating the fate of membrane-embedded products of APP processing.

Destabilizing effect of perfluorodecanoic acid on simple membrane models

Perfluoroalkyl acids (PFA) are amphiphilic surfactants widely used in industry with several commercial applications. An important feature of these compounds is their non-biodegradability and their tendency to bio-accumulate in the environment, which has led to these compounds being considered among the most persistent pollutants worldwide. Many studies have provided evidence of their toxic effect on humans and wildlife. For this reason, more and more efforts have been made to better understand the effect of these compounds on living organisms. The aim of the present study is to understand how the electrostatic interactions and film compactness of biological membrane models modulate their interaction with PFA, more specifically with perfluorodecanoic acid (PFD). Langmuir isotherms and Brewster angle microscopy (BAM) are used to evaluate the effect of PFD on lipid membrane models (air/water monolayers and vesicles), analyzing the behavior of PFD : lipid mixtures. The lipids used in this study are distearoyl phosphatidic acid (DSPA), dilauroyl phosphatidic acid (DLPA) and distearoyl phosphatidylethanolamine (DSPE). PFD induces an increase in the mean molecular area per lipid in monolayers, mainly at lower surface pressures. BAM images demonstrate that PFD mixes with DLPA, inducing a decrease in gray level, while it forms a non-miscible mixture with DSPA, segregating PFD domains. Insertion studies of PFD within monolayers and dynamic light scattering experiments demonstrate that PFD can penetrate into monolayers and bilayers above 30 mN m-1, which is the lateral pressure value accepted for a cellular bilayer.

Temperature, pH, and Molecular Packing Effects on the Penetration of Oleic Acid Monolayer by α-Lactalbumin

Recently, we reported on the interfacial behavior of mixed oleic acid (OA)-α-lactalbumin monolayer and its relevance in the formation of tumoricidal HAMLET (human α-lactalbumin made lethal to tumor cells)-like complex. This complex is probably formed in the gastrointestinal tract, but it has not been proved so far. The molecular base and the underlying physicochemical forces leading to such complexation remain to be known as well. There are also several other issues related with the complex stoichiometry that need to be fully explained. This study provides insight into the mechanism of temperature, pH, and physical state of monolayer-dependent binding of OA by the milk protein- apo-α-lactalbumin. Using the Langmuir and Langmuir-Blodgett approaches, we investigated the interactions between the OA monolayer and the apo-bovine α-lactalbumin (BLA III) at different pH, temperatures, and molecular packing. We found that the most favorable conditions for the formation of mixed OA-BLA III film are relevant to the gastric environment. The stabilization of OA-BLA III at the interface is associated with the conformational changes of protein in the presence of fatty acids induced by low pH and high temperature in the expanded monolayer. Our approach helps to understand the molecular mechanism of HAMLET/bovine α-lactalbumin made lethal to tumor cells formation in vivo.

Interfacial Activity of Phasin PhaF from Pseudomonas putida KT2440 at Hydrophobic-Hydrophilic Biointerfaces

Phasins, the major proteins coating polyhydroxyalkanoate (PHA) granules, have been proposed as suitable biosurfactants for multiple applications because of their amphiphilic nature. In this work, we analyzed the interfacial activity of the amphiphilic α-helical phasin PhaF from Pseudomonas putida KT2440 at different hydrophobic-hydrophilic interfacial environments. The binding of PhaF to surfaces containing PHA or phospholipids, postulated as structural components of PHA granules, was confirmed in vitro using supported lipid bilayers and confocal microscopy, with polyhydroxyoctanoate- co-hexanoate P(HO- co-HHx) and Escherichia coli lipid extract as model systems. The surfactant-like capabilities of PhaF were determined by measuring changes in surface pressure in Langmuir devices. PhaF spontaneously adsorbed at the air-water interface, reducing the surface tension from 72 mN/m (water surface tension at 25 °C) to 50 mN/m. The differences in the adsorption of the protein in the presence of different phospholipid films showed a marked preference for phosphatidylglycerol species, such as 1-palmitoyl-2-oleoyl- sn-glycero-3-phosphoglycerol. The PHA-binding domain of PhaF (BioF) conserved a similar surface activity to PhaF, suggesting that it is responsible for the surfactant properties of the whole protein. These new findings not only increase our knowledge about the role of phasins in the PHA machinery but also open new outlooks for the application of these proteins as biosurfactants.

Kinetically Stable Triglyceride-Based Nanodroplets and Their Interactions with Lipid-Specific Proteins

Understanding of the interactions between proteins and natural and artificially prepared lipid membrane surfaces and embedded nonpolar cores is important in studies of physiological processes and their pathologies and is applicable to nanotechnologies. In particular, rapidly growing interest in cellular droplets defines the need for simplified biomimetic lipid model systems to overcome in vivo complexity and variability. We present a protocol for the preparation of kinetically stable nanoemulsions with nanodroplets composed of sphingomyelin (SM) and cholesterol (Chol), as amphiphilic surfactants, and trioleoylglycerol (TOG), at various molar ratios. To prepare stable SM/Chol-coated monodisperse lipid nanodroplets, we modified a reverse phase evaporation method and combined it with ultrasonication. Lipid composition, ζ-potential, gyration and hydrodynamic radius, shape, and temporal stability of the lipid nanodroplets were characterized and compared to extruded SM/Chol large unilamellar vesicles. Lipid nanodroplets and large unilamellar vesicles with theoretical SM/Chol/TOG molar ratios of 1/1/4.7 and 4/1/11.7 were further investigated for the orientational order of their interfacial water molecules using a second harmonic scattering technique, and for interactions with the SM-binding and Chol-binding pore-forming toxins equinatoxin II and perfringolysin O, respectively. The surface characteristics (ζ-potential, orientational order of interfacial water molecules) and binding of these proteins to the nanodroplet SM/Chol monolayers were similar to those for the SM/Chol bilayers of the large unilamellar vesicles and SM/Chol Langmuir monolayers, in terms of their surface structures. We propose that such SM/Chol/TOG nanoparticles with the required lipid compositions can serve as experimental models for monolayer membrane to provide a system that imitates the natural lipid droplets.