Temperature-Controlled Evolution of Nanoporous MOF Crystallites into Hierarchically Porous Superstructures

Streamlined synthesis of superstructure Ni-benzimidazole MOFs: Glucose electrochemical analysis

The design and synthesis of efficient electrochemical sensors are crucial transformation technologies in electrochemistry. We successfully synthesize a three-dimensional Ni-metal-organic framework (MOF) nanostructured material with a superior architecture using benzimidazole and nickel nitrate as precursors at room temperature which is being applied in glucose electrochemical sensors. The reaction mechanism of M-6 during glucose detection is thoroughly studied using various characterization techniques, such as in situ Raman spectroscopy, in situ ultraviolet-visible spectrophotometry, synchrotron radiography, X-ray diffraction, X-ray photoelectron spectroscopy, and scanning electron microscopy. The research findings demonstrate that the M-6 material exhibits high sensitivity for glucose detection, with a sensitivity of 2199.88 mA M-1 cm-2. This study provides an important reference for designing more efficient electrochemical reaction systems and optimizing material performance. Furthermore, the superstructural design offers new ideas and possibilities for the development and application of similar materials.

Recent Advances in Hierarchical Porous Engineering of MOFs and Their Derived Materials for Catalytic and Battery: Methods and Application

Hierarchical porous materials have attracted the attention of researchers due to their enormous specific surface area, maximized active site utilization efficiency, and unique structure and properties. In this context, metal-organic frameworks (MOFs) offer a unique mix of properties that make them particularly appealing as tunable porous substrates containing highly active sites. This review focuses on recent advances in the types and synthetic strategies of hierarchical porous MOFs and their derived materials. Furthermore, it highlights the relationship between the mass diffusion and transport of hierarchical porous structures and the pore size with examples and simulations, while identifying their potential and limitations. On this basis, how the synthesis conditions affect the structure and electrochemical properties of MOFs based hierarchical porous materials with different structures is discussed, highlighting the prospects and challenges for the synthetization, as well as further scientific research and practical applications. Finally, some insights into current research and future design ideas for advanced MOFs based hierarchical porous materials are presented.

Hierarchical Nano-Electrocatalytic Reactor for High Performance Polysulfides Redox Flow Batteries

The aqueous polysulfides is an important Earth-abundant and multielectron redox couple to construct high capacity density and low-cost aqueous redox flow batteries (RFB) ; nevertheless, the sluggish conversion and kinetic behavior of S2-/Sx2- result in a low power density output and poor active material utilizations. Herein, we present nanoconfined self-assembled ordered hierarchical porous Co and N codoped carbon (OHP-Co/NC) as an electrocatalytic reactor to enhance the mass transfer and redox activity of aqueous polysulfides. Finite element method simulation proves that the OHP-Co/NC with interconnected macropores and mesopores exhibits an enhanced mass transfer and delivers a larger redox electrolyte utilization of 50.1% compared to 23.3% of conventional Co/NC. Notably, the OHP-Co/NC obtained at 850 °C delivers the smallest redox peak potential difference (ΔE = 99 mV). Comparison studies of in operando Raman for aqueous polysulfides in the redox electrolyte and in situ electrochemical Raman on the single OHP-Co/NC particle for the adsorbed polysulfides were carried out. And it confirms that the OHP-Co/NC-850 catalyst has a strong adsorption of S42- and can retard the strong disproportionation and hydrolysis behavior of polysulfides on the electrocatalyst interface. Therefore, the polysulfide/ferrocyanide RFB with an OHP-Co/NC-850 based membrane-electrode assembly (MEA) exhibited a high power density of 110 mW cm-2, as well as a steady capacity retention over 99.7% in 300 cycles.

Novel design constructed In2S3@SnO2 hollow heterojunctions by insufficiently etched MOFs as framework for photoelectrochemical bioanalysis

Compared to sufficiently etched MOFs materials, insufficiently etched MOFs materials tend to display unsatisfactory performance due to their immature structure and have been eliminated from scientific research. Herein, this work reported a novel In₂S₃@SnO₂ heterojunction (In₂S₃@SnO₂-HSHT) materials, which were stably synthesized in high temperature aqueous environment and equipped extraordinary photoelectrochemical (PEC) properties, fabricated by a succinct hydrothermal synthesis method using insufficiently etched MIL-68 as a self-sacrificing template. Compared with the control groups and In₂S₃@SnO₂ heterojunctions with collapse morphology synthesized by sufficiently etched MIL-68 in high temperature aqueous environment, In₂S₃@SnO₂-HSHT synthesized from insufficiently etched MIL-68 as a template had a massively enhanced light-harvesting capability and generated more photoinduced charge carriers due to its well-preserved hollow structure. Therefore, based on outstanding PEC performance of In₂S₃@SnO₂-HSHT, the established PEC label-free signal-off immunosensor to detect CYFRA 21-1, revealing vivid selectivity, stability, and reproducibility. This novel strategy adopted the insufficient chemical etching method neglected by the mainstream chemical etching approaches, which solved the challenge that the stability of the sufficient etched MOFs with hollow structure cannot be maintained under the subsequent high temperature aqueous reaction conditions, and was further applied to the design of hollow heterojunction materials for photoelectrochemical fields.

Self-Assembly of Helical Nanofibrous Chiral Covalent Organic Frameworks

Despite significant progress on the design and synthesis of covalent organic frameworks (COFs), precise control over microstructures of such materials remains challenging. Herein, two chiral COFs with well-defined one-handed double-helical nanofibrous morphologies were constructed via an unprecedented template-free method, capitalizing on the diastereoselective formation of aminal linkages. Detailed time-dependent experiments reveal the spontaneous transformation of initial rod-like aggregates into the double-helical microstructures. We have further demonstrated that the helical chirality and circular dichroism signal can be facilely inversed by simply adjusting the amount of acetic acid during synthesis. Moreover, by transferring chirality to achiral fluorescent molecular adsorbents, the helical COF nanostructures can effectively induce circularly polarized luminescence with the highest luminescent asymmetric factor (g_lum ) up to ≈0.01.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.

A Hexagonal Nut-Like Metal-Organic Framework and Its Conformal Transformation

Hollow structured metal-organic frameworks (MOFs) and their derivatives are desired in catalysis, energy storage, etc. However, fabrication of novel hollow MOFs and revelation of their formation mechanisms remain challenging. Herein, open hollow 2D MOFs in the form of hexagonal nut are prepared through self-template method, which can be readily scaled up at gram scale in a one-pot preparation. The evolution from the initial superstructure to the final stable MOFs is tracked by wide-angle X-ray scattering, transforming from solid hexagon to open hollow hexagon. More importantly, this protocol can be extended to synthesizing a series of open hollow structured MOFs with sizes ranging from ≈120 to ≈1200 nm. Further, open hollow structured cobalt/N-doped porous carbon composites are realized through conformal transformation of the as-prepared MOFs, which demonstrates promising applications in sustainable energy conversion technologies. This study sheds light on the kinetically controlled synthesis of novel 2D MOFs for their extended utilizations.

Two-dimensional assembly made up of ZIF-8 particles for the high-efficient capture of the iodine and dyes

The removal of the pollutants from the environment is the need of the environmental protection. ZIF-8 is promising adsorbents, and the construction of ZIF-8 assembly is essential to boost its performance. Here, we showed the easy synthesis of two-dimensional (2D) assembly built by ZIF-8 particles (2D A-ZIF-8) for the high-efficient capture of the iodine (I₂) and dyes. The assembly was synthesized by the controllable reaction of 2-methylimidazole (2-MIM) with 2D Zn-glycerol (Zn-GL) precursor. Time-dependent experiments showed the predominant replacement of GL at outer boundary and then basic plane of the precursor by 2-MIM. The assembly can be synthesized with high output and combined the advantage of large accessible surface of 2D sheets, the plentiful pores of ZIF-8 and enhanced stability of assembly, endowing the large potential as adsorbent. The high adsorption capacity of I₂ (200 wt%) was achieved on A-ZIF-8, while it is about 128 wt% on traditional dodecahedronal ZIF-8. The assembly also showed the excellent adsorption capacity for methyl orange (MO) (46.3 mg g^-1) and methylene blue (MB) (46.5 mg g^-1) at a concentration of 50 mg L^-1. It can be easily separated for reuse benefited from the large size and enhanced stability of assembly.

Fabrication of Hierarchical Quaternary Architectures of Metal-Organic Frameworks through Programmed Transformation

A new method to construct hierarchical architectures has been developed by programmed transformation of metal-organic frameworks (MOFs). A MOF precursor was fabricated by reaction of Cu(OAC)₂ and 2,5-dihydroxyterephthalic acid (H₄DOBDC), which could perform transformation in pure methanol solvent and the sodium dodecyl benzene sulfonate (SDBS) solution of methanol, respectively. Interestingly, two kinds of immersion solutions could induce the transformation of the MOF precursor into MOF-74, which resulted in different morphologies: nanoneedles for the methanol and nanosheets for the SDBS. Herein, nanosheets-mesorods-microcuboid hierarchical quaternary architectures of MOF have been successfully achieved by sequential immersion of the precursor in two kinds of transformation solutions, which demonstrates well-defined hierarchy from the nanoscale to mesoscale to microscale. A unique hierarchical architecture could be recognized as quaternary structures, taking the MOF unit cell as the primary structure, the nanosheets as the secondary structure, the mesorods as the tertiary structure, and the microcuboid as the quaternary structure. Our study indicated the potential of programmed transformation between MOFs in the construction of hierarchical architectures, offering a new approach to sophisticated materials.

Single Crystals Heterogeneity Impacts the Intrinsic and Extrinsic Properties of Metal-Organic Frameworks

At present, an enormous characterization gap exists between the study of the crystal structure of a material and its bulk properties. Individual particles falling within this gap cannot be fully characterized in a correlative manner by current methods. The authors address this problem by exploiting the noninvasive nature of optical microscopy and spectroscopy for the correlative analysis of metal-organic framework particles in situ. They probe the intrinsic as well as extrinsic properties in a correlated manner. The authors show that the crystal shape of MIL-88A strongly impacts its optical absorption. Furthermore, the question of how homogeneously water is distributed and adsorbed within one of the most promising materials for harvesting water from humid air, MOF-801, is addressed. The results demonstrate the considerable importance of the particle level and how it can affect the property of the material.

Prediction of an Al4C4 superatom organic framework (SOF) material based on the superatom network model

Metal organic framework (MOF) materials have attracted significant attention due to their wide potential applications, but it is still a challenge to design MOFs with advanced properties by exploring novel metal nodes. In this study, a kind of superatom organic framework (SOF) material is proposed based on the superatom network (SAN) model. Tetrahedron Al₄ superatom unit is used as nodes in the MOF structure, and linear -CC- ligands are chosen as linkers. Localized chemical bonding analysis and nucleus-independent chemical shift (NICS) scan confirm that the Al₄ core keeps the superatom electronic shell in the SOF structure. Further calculations demonstrate that this Al₄C₄ crystal has high dynamic and thermal stabilities, with an indirect semiconductor band gap of 2.57 eV. Analysis of its optical properties indicates its potential applications as an optoelectronic device. This novel kind of SOF material has both porous framework as traditional MOFs and superatomic character in its nodes, indicating its unique potential properties. Our work would provide a new way for designing functional MOF materials.

The controllable synthesis of urchin-shaped hierarchical superstructure MOFs with high catalytic activity and stability

A novel dissolution-crystallization-attachment strategy was developed to synthesize urchin-shaped superstructure metal-organic frameworks (MOFs) with self-assembled one-dimensional nanorods. The superstructure MOFs not only inherited the high activity of nanosized MOFs but also displayed the high stability of microsized MOFs.

A Metal-Organic Framework Nanorod-Assembled Superstructure and Its Derivative: Unraveling the Fast Potassium Storage Mechanism in Nitrogen-Modified Micropores

3D carbon-based materials with multiscale hierarchy are promising electrode materials for electrochemical energy storage and conversion applications, but the synthesis in an efficient and large-scale way is still a great challenge. Herein, a carbon nanorod-assembled 3D superstructure is facilely fabricated by morphology-preserving conversion of a metal-organic framework (MOF) nanorod-assembled superstructure. The MOF superstructure can be fabricated in one-pot synthesis with high reproducibility and high yield by precise control of the MOF nucleation and growth. Its derived carbon inherits the nanorod-assembled superstructure and possesses abundant micropores and nitrogen doping, which can serve as a high-performance anode material for fast potassium storage. The superiority of the superstructure and the synergism of micropore capturing and nitrogen anchoring are verified both experimentally and theoretically.

Nanoscale Metal-Organic Frameworks That are Both Fluorescent and Hollow for Self-Indicating Drug Delivery

Nanoscale metal-organic frameworks (MOFs) that are both fluorescent and hollow are attracting increasing interest in recent years, but ideal candidates prepared by reliable methods for biomedical applications are still very limited. Herein, we for the first time prepared tetrakis[4-(4-carboxyphenyl)phenyl]ethene (TCBPE)-based MOF nanotubes with hollow nanostructures, which could emit strong fluorescence. It was further discovered that the formation of this hollow hexagonal nanotube underwent a self-templated growth and a subsequent concaving process, which revealed that the synthesis of this MOF was kinetic rather than thermodynamic. This new MOF showed high biocompatibility, optical stability, sensitivity to pH response, and capability for exotic loading. This new MOF was further employed for efficient anti-cancer drug delivery in a self-indicating manner based on these attractive features. Therefore, this work could bring in valuable insights into the exploration of multifunctional MOFs in the field of biomedical applications by providing a new exemplar with high practical utility.

Ti4+-immobilized hierarchically porous zirconium-organic frameworks for highly efficient enrichment of phosphopeptides

Ti⁴⁺-immobilized hierarchically porous zirconium-organic frameworks (denoted as THZr-MOFs) was prepared for phosphopeptide enrichment. The THZr-MOFs showed high specific surface area of 185.28 m² g^-1, wide pore-size distribution of 3 ~ 20 nm, good chemical stability and excellent hydrophilicity. Introduction of hierarchical pores in MOFs not only facilitated the accessibility of phosphopeptides to the internal metal affinity sites and reduce their mass transfer resistance, but also increased the exposure sites of metal affinity interaction and binding energies of Zr and Ti elements. Benefited from these advantages, the THZr-MOFs showed high adsorption capacity (79.8 μg mg^-1) towards standard phosphopeptide. A low detection limit (0.05 fmol μL^-1) and high enrichment selectivity (β-casein/BSA with a molar ratio of 1:5000) were also obtained by MALDI-TOF MS. The THZr-MOFs were applied to analyze complex samples including nonfat milk, human serum, and HeLa cell lysate. In total, 1432 phosphopeptides derived from 762 phosphoproteins were identified from human HeLa cell lysate. Schematic representation of the application of Ti⁴⁺-immobilized hierarchically porous zirconium-organic frameworks (denoted as THZr-MOFs) in high-efficiency and selective enrichment of low-abundance phosphopeptides from the tryptic digest of human HeLa cell lysate.

Controlled Shape Evolution of Pure-MOF 1D Microcrystals towards Efficient Waveguide and Laser Applications

MOF-based one-dimensional materials have received increasing attention in the nanophotonics field, but it is still difficult in the flexible shape evolution of MOF micro/nanocrystals for desired optical functionalities due to the susceptible solvothermal growth process. Herein, we report on the well-controlled shape evolution of pure-MOF microcrystals with optical waveguide and lasing performances based on a bottom-up and top-down synergistic method. The MOF microcrystals from solvothermal synthesis (bottom-up) enable the evolution from microrods via microtubes to nanowires through a chelating agent-assisted etching process (top-down). The three types of MOF 1D-microstructures with high crystallinity and smooth surfaces all exhibit efficient optical waveguide performance. Furthermore, MOF nanowire with lowest propagation loss served as low-threshold pure-MOF nanolasers with Fabry-Pérot resonance. These results advance the fundamental understanding on the controlled MOF evolution mechanism, and offer a valuable route for the development of pure-MOF-based photonic components with desired functionalities.

MOF-74-type frameworks: tunable pore environment and functionality through metal and ligand modification

This highlight demonstrates a comprehensive overview of MOF-74-type frameworks in terms of synthetic approaches and pre- or post-synthetic modification approaches.

Beyond Frameworks: Structuring Reticular Materials across Nano-, Meso-, and Bulk Regimes

Reticular materials are of high interest for diverse applications, ranging from catalysis and separation to gas storage and drug delivery. These open, extended frameworks can be tailored to the intended application through crystal-structure design. Implementing these materials in application settings, however, requires structuring beyond their lattices, to interface the functionality at the molecular level effectively with the macroscopic world. To overcome this barrier, efforts in expressing structural control across molecular, nano-, meso-, and bulk regimes is the essential next step. In this Review, we give an overview of recent advances in using self-assembly as well as externally controlled tools to manufacture reticular materials over all the length scales. We predict that major research advances in deploying these two approaches will facilitate the use of reticular materials in addressing major needs of society.

Fabrication of Magnetic Superstructure NiFe2O4@MOF-74 and Its Derivative for Electrocatalytic Hydrogen Evolution with AC Magnetic Field

As an ideal hydrogen production route, electrolyzed water still faces the challenges of high cost of noble-metal electrocatalysts and low performance of non-noble-metal catalysts in scalable applications. Recently, introduction of external fields (such as magnetic fields, light fields, etc.) to improve the electrocatalytic water splitting performance of non-noble-metal catalysts has attracted great attention due to their simplicity. Here, a simple method for preparing magnetic superstructure (NiFe₂O₄@MOF-74) is described, and the hydrogen evolution reaction (HER) behavior of its carbonized derivative, a ferromagnetic superstructure, is revealed in a wide range of applied voltage under an AC magnetic field. The overpotential (@10 mA cm^-2) required for the HER of the obtained ferromagnetic superstructure in 1 M KOH was reduced by 31 mV (7.7%) when a much small AC magnetic field (only 2.3 mT) is applied. Surprisingly, the promotion effect of the AC magnetic field is not monotonically increasing with the increase of the applied voltage or the strength of AC magnetic field, but increasing first, then weakening. This unusual behavior is believed to be mainly caused by the enhanced induced electromotive force and the additional energy by the applied AC magnetic field. This discovery provides a new idea for adjusting the performance of electrocatalytic reactions.

Destruction of Metal-Organic Frameworks: Positive and Negative Aspects of Stability and Lability

Metal-organic frameworks (MOFs), constructed from organic linkers and inorganic building blocks, are well-known for their high crystallinity, high surface areas, and high component tunability. The stability of MOFs is a key prerequisite for their potential practical applications in areas including storage, separation, catalysis, and biomedicine since it is essential to guarantee the framework integrity during utilization. However, MOFs are prone to destruction under external stimuli, considerably hampering their commercialization. In this Review, we provide an overview of the situations where MOFs undergo destruction due to external stimuli such as chemical, thermal, photolytic, radiolytic, electronic, and mechanical factors and offer guidelines to avoid unwanted degradation happened to the framework. Furthermore, we discuss possible destruction mechanisms and their varying derived products. In particular, we highlight cases that utilize MOF instability to fabricate varying materials including hierarchically porous MOFs, monolayer MOF nanosheets, amorphous MOF liquids and glasses, polymers, metal nanoparticles, metal carbide nanoparticles, and carbon materials. Finally, we provide a perspective on the utilization of MOF destruction to develop advanced materials with a superior hierarchy for various applications.

One-step ultrasonic synthesis of Co/Ni-catecholates for improved performance in oxygen reduction reaction

The inherent periodically arranged M-N_X, M-S_X and M-O_X units (M are usually Fe, Co, Ni, etc.) in metal-organic frameworks (MOFs) can be promising active centers in electrocatalysis. In previous studies, MOFs were usually constructed by energy-consuming hydro- or solvo-thermal reactions. Ultrasonic synthesis is a rapid and environment-friendly technique when envisaging MOFs' industrial applications. In addition, different synthetic pathways for MOFs may lead to difference in their microstructure, resulting in different electrocatalytic performance. Nevertheless, only a handful of MOFs were successfully prepared by ultrasonic synthesis and few were applied in electrochemical catalysis. Herein, we constructed Ni/Co-catecholates (Ni/Co-CATs) synthesized by one-step ultrasonic method (250 W, 40 KHz, 25 W/L, Ultrasonic clearing machine) and compared their performance in oxygen reduction reaction (ORR) with that of Ni/Co-CATs synthesized by hydrothermal method. Ni-CAT and Co-CAT prepared by ultrasonic showed the half-wave potential of -0.196 V and -0.116 V (vs. Ag/AgCl), respectively. The potentials were more positive than those prepared by hydro-thermal method. And they showed excellent electrochemical stability in neutral solution. The latter was only 32 mV lower than that of commercial Pt/C. The improved performance in ORR was attributed to higher specific surface area and mesopore volume as well as more structural defects generated in the ultrasonic synthesis process, which could facilitate their exposure of electrocatalytic active sites and their mass transport. This work gives some perspective into cost-effective synthetic strategies of efficient MOFs-based electrocatalysts.

Surfactant-Mediated Morphological Evolution of MnCo Prussian Blue Structures

In the preparation of nanomaterials, the kinetics and thermodynamics in the reaction can significantly affect the structures and phases of nanocrystals. Therefore, people are keen to adopt various synthetic strategies to accurately assemble the target nanocrystals, and reveal the underlying mechanism of the formation of specific structures. In this work, the total reaction time is adjusted to let the prepared MnCo Prussian blue analogous (MnCoPBA) crystals show four evolving morphological changes at different stages with the assistance of sodium dodecyl sulfate. Furthermore, it is clearly observed that the epitaxial growth along the (100) plane on the shell of MnCoPBA nanocrystals is favored, and the thermodynamics and kinetics in the morphology change process are analyzed in detail. Through the simple pyrolysis, MnCoPBA crystals can be successfully converted into the corresponding carbon composites, of which Mn₂ Co₂ C nanoparticles are evenly distributed in highly graphitized carbon matrix. Among them, PBA-III-700 performs good oxygen reduction reaction performance in alkaline solution with the half-wave potential of 0.801 V and diffusion-limited current density of 5.36 mA cm^-2 , and its zinc-air battery exhibits the peak power density of 103.4 mW cm^-2 competitive with commercial Pt/C.

Hierarchy in Metal-Organic Frameworks

Sequence-defined nucleic acids and proteins with internal monomer sequences and arrangement are vital components in the living world, as a result of billions of years of molecular evolution. These natural hierarchical systems have inspired researchers to develop artificial hierarchical materials that can mimic similar functions such as replication, recognition, and information storage. In this Outlook, we describe the conceptual introduction of hierarchy into the design of metal-organic framework (MOF) materials. Starting with a history and background of hierarchical MOF synthesis and applications, we discuss further mesoscopic assembly strategies of MOF crystallites into hierarchical primary, secondary, tertiary, and quaternary architectures. This is followed by a highlight of the utilization of modular total synthesis for crafting MOFs with hierarchical compositions. The multiscale control over hierarchical MOF architecture formation can be rationally achieved by designing stepwise synthetic routes based on the knowledge from various fields including coordination chemistry, organic chemistry, reticular chemistry, and nanoscience. Altogether, this outlook is expected to shed light on these essential but embryonic materials and might offer inspiration for the development of the next generation of smart MOF materials with controllable heterogeneity and tailorable architectures.

Coordination assembly of 2D ordered organic metal chalcogenides with widely tunable electronic band gaps

Engineering the band gap chemically by organic molecules is a powerful tool with which to optimize the properties of inorganic 2D materials. The obtained materials are however still limited by inhomogeneous compositions and properties at nanoscale and small adjustable band gap ranges. To overcome these problems in the traditional exfoliation and then organic modification strategy, an organic modification and then exfoliation strategy was explored in this work for preparing 2D organic metal chalcogenides (OMCs). Unlike the reported organically modified 2D materials, the inorganic layers of OMCs are fully covered by long-range ordered organic functional groups. By changing the electron-donating ability of the organic functional groups and the electronegativity of the metals, the band gaps of OMCs were varied by 0.83 eV and their conductivities were modulated by 9 orders of magnitude, which are 2 and 107 times higher than the highest values observed in the reported chemical methods, respectively.

Seed-mediated evolution of hierarchical metal-organic framework quaternary superstructures

Varying levels of hierarchy in metal–organic framework (MOF) superstructures are achieved through seed-mediated evolution of multiple MOF modules.

The idea of hierarchy, widely observed in natural and artificial worlds, has been extensively explored in chemistry and materials science. Similar to proteins which contain primary, secondary, tertiary and quaternary structures, varying levels of hierarchy in metal–organic framework (MOF) superstructures can also be achieved. In this work, we initiate a systematic study on the morphological evolution of hierarchical superstructures with the assistance of seeded growth and explore the assembly of multiple modular MOFs into superstructures with enhanced hierarchy and diversity. By utilizing MOF-74-III spherulite superstructures as seeds, multiple quaternary architectures were obtained depending on the lengths of organic linker precursors. The resulting superstructures with superior hierarchy represent a unique porous material which contains multiple modules with diverse morphologies. To the best of our knowledge, this is the first report that utilizes tertiary superstructures as seeds in MOF synthesis, which leads to unusual and diverse behaviors during secondary growth. This synthetic approach not only provides a facile method to establish hierarchy in porous materials, but also enables the fabrication of multiscale heterostructures through secondary growth on MOF seeds.

Synthesis of micro/nanoscaled metal–organic frameworks and their direct electrochemical applications

Developing strategies to control the morphology and size of MOFs is important for their applications in batteries, supercapacitors and electrocatalysis. This review focuses on the design and fabrication of MOFs at the micro/nanoscale.

Uncovering Structural Opportunities for Zirconium Metal-Organic Frameworks via Linker Desymmetrization

The discovery of metal-organic frameworks (MOFs) mimicking inorganic minerals with intricate topologies requires elaborate linker design guidelines. Herein, the concept of linker desymmetrization into the design of tetratopic linker based Zr-MOFs is applied. A series of bent tetratopic linkers with various substituents are utilized to construct Zr-MOFs with distinct cluster connectivities and topologies. For example, the assembly between a bent linker L-SO2 with C 2v symmetry and an 8-connected Zr6 cluster leads to the formation of an scu topology, while another flu topology can be obtained by the combination of a novel 8-connected Zr6 cluster and a bent linker L-O with C 1 symmetry. Further utilization of restricted bent linker [(L-(CH3)6)] gives rise to a fascinating (4, 6)-c cor net, originated from the corundum lattice, with an unprecedented 6-c Zr6 cluster. In addition, the removal of toxic selenite ions in aqueous solution is performed by PCN-903-(CH3)6 which exhibits rapid and efficient detoxification. This work uncovers new structural opportunities for Zr-MOFs via linker desymmetrization and provides novel design strategies for the discovery of sophisticated topologies for practical applications.

Hierarchically porous metal–organic frameworks: synthetic strategies and applications

Despite numerous advantages, applications of conventional microporous metal–organic frameworks (MOFs) are hampered by their limited pore sizes, such as in heterogeneous catalysis and guest delivery, which usually involve large molecules. Construction of hierarchically porous MOFs (HP-MOFs) is vital to achieve the controllable augmentation of MOF pore size to mesopores or even macropores, which can enhance the diffusion kinetics of guests and improve the storage capacity. This review article focuses on recent advances in the methodology of HP-MOF synthesis, covering preparation of HP-MOFs with intrinsic hierarchical pores, and modulated, templated and template-free synthetic strategies for HP-MOFs. The key factors which affect the formation of HP-MOF architectures are summarized and discussed, followed by a brief review of their applications in heterogeneous catalysis and guest encapsulation. Overall, this review presents a roadmap that will guide the future design and development of HP-MOF materials with molecular precision and mesoscopic complexity.

Computer-aided discovery of connected metal-organic frameworks

Composite metal-organic frameworks (MOFs) tend to possess complex interfaces that prevent facile and rational design. Here we present a joint computational/experimental workflow that screens thousands of MOFs and identifies the optimal MOF pairs that can seamlessly connect to one another by taking advantage of the fact that the metal nodes of one MOF can form coordination bonds with the linkers of the second MOF. Six MOF pairs (HKUST-1@MOF-5, HKUST-1@IRMOF-18, UiO-67@HKUST-1, PCN-68@MOF-5, UiO-66@MIL-88B(Fe) and UiO-67@MIL-88C(Fe)) yielded from our theoretical predictions were successfully synthesized, leading to clean single crystalline MOF@MOF, demonstrating the power of our joint workflow. Our work can serve as a starting point to accelerate the discovery of novel MOF composites that can potentially be used for many different applications.