Gigantic Porphyrinic Cages

Template and Solid-State-Assisted Assembly of an M9L6 Expanded Coordination Cage for Medium-Sized Molecule Encapsulation

The M6L4 cage, self-assembling from six Pd(II) or Pt(II) 90-degree blocks and four triazine-cored triangular ligands, has an effective hydrophobic cavity of about 450 Å3 capable of encapsulating one or more small molecules. Here, from the same components, we successfully constructed an M9L6 cage with an internal volume expanded to 1540 Å3 via the self-assembly of an M8L6 precursor using pillar[5]arene as a template. This cage retains the high molecular recognition ability of the M6L4 cage while recognizing medium-sized guest molecules with molecular weights of up to ∼1600.

Enhancing the Chemical Stability of P12L24 Cage: Transformation of the Chemically Labile Imine Cage into a Robust Carbamate Cage

Herein, we report enhancement in chemical stability of the imine-based porphyrinic cage P12L24 by converting it into a robust carbamate porphyrinic cage, c-P12L24, through a two-step post-synthetic modification process. First, the imine bonds in P12L24 were reduced to form an amine-based cage, r-P12L24, followed by carbamation using N,N'-carbonyldiimidazole (CDI) to yield c-P12L24. The resulting carbamate cage exhibits high stability under acidic and basic conditions (pH 1-13) and in the presence of moisture. 1H NMR, DOSY NMR, and DFT calculations revealed that reducing the imine bonds to amine increases the framework's flexibility, causing partial structural collapse, whereas the carbamate formation restores structural rigidity. The insertion of a 4.0 nm molecular ruler into the cavity of zinc-metallated c-P12L24 via metal-ligand coordination further confirmed restoration of the cavity size and geometry of the original cage. This enhancement of chemical stability through carbamate formation can pave the way to a wide range of potential applications for the gigantic porphyrinic cage.

Porous Molecular Crystals Derived from Cofacial Porphyrin/Phthalocyanine Heterodimers

Porphyrin-based porous materials are of growing interest as heterogeneous catalysts especially for reactions that are of importance to sustainability. Here we demonstrate that porous molecular crystals can be prepared by the simple co-crystallisation of tetraphenylporphyrin (TPP) with octa(2',6'-di-iso-propylphenoxy)phthalocyanine or some of its metal complexes [(dipPhO)8PcM; M=H2, Al-OH, Ti=O, Mn-Cl, Fe-Cl, Co, Ni, Cu, Zn, Ga-Cl, Ag, In-Cl or Au-Cl]. This process is facilitated by the efficient formation of the supramolecular heterodimer between TPP and (dipPhO)8PcM, which is driven by the complementary shape and symmetry of the two macrocycles. The (dipPhO)8PcM component directs the crystal structure of the heterodimers to form Phthalocyanine Nanoporous Crystals (PNCs) of similar structure to those formed by (dipPhO)8PcM alone. The incorporation of TPP appears to partially stabilise the PNCs towards the removal of included solvent and for cocrystals containing (dipPhO)8PcCo stability can be enhanced further by the insitu addition of 4,4-bipyridyl to act as a "molecular wall tie". These stabilised PNC/TPP cocrystals have a Brunauer-Emmett-Teller surface area (SABET) of 454 m2 g-1 and a micropore volume (Vmp) of 0.22 mL g-1. The reactivity of both macrocycles within the PNC/TPP co-crystals is demonstrated by insitu metal insertion.

Self-Assembly of an Unlikely Occurring Quadrangular Tube by Modulating Intramolecular Forces

One of the central focuses in self-assembly is precisely controlling the self-assembly pathway so that the target molecules can be produced exclusively. Trans-1,2-cyclohexanediamine contains two amino units that form a 60° angle when projected on a plane. This angle naturally favors the formation of triangular products in most cases when trans-1,2-cyclohexanediamine is used as a bisamino building block in the synthesis of macrocycles and tubes. Here, we synthesized a slightly bent tetraformyl precursor bearing a central dibenzothiophene moiety, whose 3,7-positions are functionalized with two m-phthalaldehyde units. We observed that combining this tetraformyl building block with trans-1,2-cyclohexanediamine yielded a quadrangular tube when the concentrations of the precursors were relatively high. Both experimental measurements and theoretical calculations indicate that the formation of this unlikely occurring quadrangular product was driven by the intramolecular C-H⋅⋅⋅π interactions between the dibenzothiophene building blocks within the tube framework. This driving force, however, was disturbed in the triangular tube, a smaller counterpart whose formation was considered previously much more thermodynamically favored. These results improved our fundamental understanding on how to create those products whose syntheses are considered difficult or impossible, by modulating the intramolecular driving forces.

Supramolecular and molecular capsules, cages and containers

Stemming from early seminal notions of molecular recognition and encapsulation, three-dimensional, cavity-containing capsular compounds and assemblies have attracted intense interest due to the ability to modulate chemical and physical properties of species encapsulated within these confined spaces compared to bulk environments. With such a diverse range of covalent motifs and non-covalent (supramolecular) interactions available to assemble building blocks, an incredibly wide-range of capsular-type architectures have been developed. Furthermore, synthetic tunability of the internal environments gives chemists the opportunity to engineer systems for uses in sensing, sequestration, catalysis and transport of molecules, just to name a few. In this tutorial review, an overview is provided into the design principles, synthesis, characterisation, structural facets and properties of coordination cages, porous organic cages, supramolecular capsules, foldamers and mechanically interlocked molecules. Using seminal and recent examples, the advantages and limitations of each system are explored, highlighting their application in various tasks and functions.

Recent advances in porous organic cages for energy applications

In recent years, the energy and environmental crises have attracted more and more attention. It is very important to develop new materials and technologies for energy storage and conversion. In particular, it is crucial to develop carriers that store energy or promote mass and electron transport. Emerging porous organic cages (POCs) are very suitable for this purpose because they have inherent advantages including structural designability, porosity, multifunction and post-synthetic modification. POC-based materials, such as pristine POCs, POC composites and POC derivatives also exhibit excellent energy-related properties. This latest perspective provides an overview of the progress of POC-based materials in energy storage and conversion applications, including photocatalysis, electrocatalysis (CO2RR, NO3RR, ORR, HER and OER), separation (gas separation and liquid separation), batteries (lithium-sulfur, lithium-ion and perovskite solar batteries) and proton conductivity, highlighting the unique advantages of POC-based materials in various forms. Finally, we summarize the current advances, challenges and further perspectives of POC-based materials in energy applications. This perspective will promote the design and synthesis of next-generation POC-based materials for energy applications.

Engineering a Surfactant Trap via Postassembly Modification of an Imine Cage

Imine self-assembly stands as a potent strategy for the preparation of molecular organic cages. However, challenges persist, such as water insolubility and limited recognition properties due to constraints in the application of specific components during the self-assembly process. In this study, we addressed these limitations by initially employing a locking strategy, followed by a postassembly modification. This sequential approach enables precise control over both the solubility and host-guest properties of an imine-based cage. The resulting structure demonstrates water solubility and exhibits an exceptional capacity to selectively interact with anionic surfactants, inducing their precipitation. Remarkably, each cage precipitates 24 equiv of anionic surfactants even at concentrations much lower than the surfactant's critical micelle concentration (CMC), ensuring their complete removal. Molecular simulations elucidate how anionic surfactants specifically interact with the cage to facilitate aggregation below the surfactant CMC and induce precipitation as a micellar cross-linker. This innovative class of cages paves the way for the advancement of materials tailored for environmental remediation.

Active Molecular Gripper as a Macrocycle Synthesizer

A confined space preorganizes substrates, which substantially changes their chemical reactivity and selectivity; however, the performance as a reaction vessel is hampered by insensitivity to environmental changes. Here, we show a dynamic confined space formed by substrate grasping of an amphiphilic host with branched aromatic arms as an active molecular gripper capable of performing substrate grasping, macrocyclization, and product release acting as a macrocycle synthesizer. The confined reaction space is formed by the substrate grasping of the molecular gripper, which is further stabilized by gel formation. Confining a linear substrate in the closed form of the gripper triggers a spontaneous ring-forming reaction to release a macrocycle product by opening. The consecutive open-closed switching enables repetitive tasks to be performed with remarkable working efficiency.

Metal Ions Trigger the Gelation of Cysteine-Containing Peptide-Appended Coordination Cages

We report a series of coordination cages that incorporate peptide chains at their vertices, prepared through subcomponent self-assembly. Three distinct heterochiral tripeptide subcomponents were incorporated, each exhibiting an L-D-L stereoconfiguration. Through this approach, we prepared and characterized three tetrahedral metal-peptide cages that incorporate thiol and methylthio groups. The gelation of these cages was probed through the binding of additional metal ions, with the metal-peptide cages acting as junctions, owing to the presence of sulfur atoms on the peripheral peptides. Gels were obtained with cages bearing cysteine at the C-terminus. Our strategy for developing functional metal-coordinated supramolecular gels with a modular design may result in the development of materials useful for chemical separations or drug delivery.

Synthesis of Calix[4]arene-Based Porous Organic Cages and Their Gas Adsorption

Two crystalline large-sized porous organic cages (POCs) based on conical calix[4]arene (C4A) were designed and synthesized. The four-jaw C4A unit tends to follow the face-directed self-assembly law with the planar triangular building blocks such as tris(4-aminophenyl)amine (TAPA) or 1,3,5-tris(4-aminophenyl)benzene (TAPB) to generate a predictable cage with a stoichiometry of [6+8]. The formation of the large cages is confirmed through their relative molecular mass measured using MALDI-TOF/TOF spectra. The protonated molecular ion peaks of C4A-TAPA and C4A-TAPB were observed at m/z 5109.0 (calculated for C336H240O24N32: m/z 5109.7) and m/z 5594.2 (calculated for C384H264O24N24: m/z 5598.4). C4A-POCs exhibit I-type N2 adsorption-desorption isotherms with the BET surface areas of 1444.9 m2 ⋅ g-1 and 1014.6 m2 ⋅ g-1. The CO2 uptakes at 273 K are 62.1 cm3 ⋅ g-1 and 52.4 cm3 ⋅ g-1 at a pressure of 100 KPa. The saturated iodine vapor static uptakes at 348 K are 3.9 g ⋅ g-1 and 3.5 g ⋅ g-1. The adsorption capacity of C4A-TAPA for SO2 reaches to 124.4 cm3 ⋅ g-1 at 298 K and 1.3 bar. Additionally, the adsorption capacities of C4A-TAPA for C2H2, C2H4, and C2H6 were evaluated.

High-order layered self-assembled multicavity metal--organic capsules and anti-cooperative host-multi-guest chemistry

The construction and application of metal-organic cages with accessible internal cavities have witnessed rapid development, however, the precise synthesis of complex metal-organic capsules with multiple cavities and achievement of multi-guest encapsulation, and further in-depth comprehension of host-multi-guest recognition remain a great challenge. Just like building LEGO blocks, herein, we have constructed a series of high-order layered metal-organic architectures of generation n (n = 1/2/3/4 is also the number of cavities) by multi-component coordination-driven self-assembly using porphyrin-containing tetrapodal ligands (like plates), multiple parallel-podal ligands (like clamps) and metal ions (like nodes). Importantly, these high-order assembled structures possessed different numbers of rigid and separate cavities formed by overlapped porphyrin planes with specific gaps. The host-guest experiments and convincing characterization proved that these capsules G2-G4 could serve as host structures to achieve multi-guest recognition and unprecedentedly encapsulate up to four C60 molecules. More interestingly, these capsules revealed negative cooperation behavior in the process of multi-guest recognition, which provides a new platform to further study complicated host-multi-guest interaction in the field of supramolecular chemistry.

Spheroid models to elaborate the broken symmetry and equivalent volume of molecules in crystalline phase

Dense packing of particles has provided powerful models to elaborate the important structural features of matter in various systems such as liquid, glassy, and crystalline phases. The simplest sphere packing models can represent and capture salient properties of the building blocks for covalent, metallic, and ionic crystals; it, however, becomes insufficient to reflect the broken symmetry of the commonly anisotropic molecules in molecular crystals. Here, we develop spheroid models with a minimal degree of anisotropy, which serve as a simple geometrical representation for a rich spectrum of molecules-including both isotropic and anisotropic, convex and concave ones-in crystalline phases. Our models are determined via an inverse packing approach: Given a molecular crystal, an optimal spheroid model is constructed using a contact diagram, which depicts the packing relationship between neighboring molecules within the crystal. The spheroid models are capable of accurately capturing the broken symmetry and characterizing the equivalent volume of molecules in the crystalline phases. Moreover, our model retrieves such molecular information from low-quality x-ray diffraction data with poorly resolved structures, and by using soft spheroids, it can also describe the packing behavior in cocrystals.

Enantioselective Self-Assembly of a Homochiral Tetrahedral Cage Comprising Only Achiral Precursors

How Nature synthesizes enantiomerically pure substances from achiral or racemic resources remains a mystery. In this study, we aimed to emulate this natural phenomenon by constructing chiral tetrahedral cages through self-assembly, achieved by condensing two achiral compounds-a trisamine and a trisaldehyde. The occurrence of intercomponent CH⋅⋅⋅π interactions among the phenyl building blocks within the cage frameworks results in twisted conformations, imparting planar chirality to the tetrahedrons. In instances where the trisaldehyde precursor features electron-withdrawing ester side chains, we observed that the intermolecular CH⋅⋅⋅π forces are strong enough to prevent racemization. To attain enantioselective self-assembly, a chiral amine was introduced during the imine formation process. The addition of three equivalents of chiral amino mediator to one equivalent of the achiral trisaldehyde precursor formed a trisimino intermediate. This chiral compound was subsequently combined with the achiral trisamino precursor, leading to an imine exchange reaction that releasing the chiral amino mediator and formation of the tetrahedral cage with an enantiomeric excess (ee) of up to 75 %, exclusively composed of achiral building blocks. This experimental observation aligns with theoretical calculations based on the free energies of related cage structures. Moreover, since the chiral amine was not consumed during the imine exchange cycle, it enabled the enantioselective self-assembly of the tetrahedral cage for multiple cycles when new batches of the achiral trisaldehyde and trisamino precursors were successively added.

Modular Strategy for Constructing para-Cage[n]arenes, meta-Cage[n]arenes, and meta-Bimacrocyclic-Arenes

Here, we present a versatile modular strategy for crafting novel covalent organic cages (para-cage[n]arenes and meta-cage[n]arenes, n = 3,4) and bimacrocycles (meta-bimacrocyclic-arenes) with stable backbones and modifiable rims. These structures can be synthesized from commercially available aromatic multialdehydes in a three-step process: quantitative bromination, Suzuki-Miyaura reaction (yielding over 60%), and a rapid one-pot Friedel-Crafts reaction with paraformaldehyde. Notably, the cage[n]arenes exhibit a well-defined prismatic shape, and the bimacrocyclic-arenes display both dimeric and monomeric configurations.

Steric and Geometrical Frustration Generate Two Higher-Order CuI12L8 Assemblies from a Triaminotriptycene Subcomponent

The use of copper(I) in metal-organic assemblies leads readily to the formation of simple grids and helicates, whereas higher-order structures require complex ligand designs. Here, we report the clean and selective syntheses of two complex and structurally distinct CuI12L8 frameworks, 1 and 2, which assemble from the same simple triaminotriptycene subcomponent and a formylpyridine around the CuI templates. Both represent new structure types. In T-symmetric 1, the copper(I) centers describe a pair of octahedra with a common center but whose vertices are offset from each other, whereas in D3-symmetric 2, the metal ions form a distorted hexagonal prism. The syntheses of these architectures illustrate how more intricate CuI-based complexes can be prepared via subcomponent self-assembly than has been possible to date through consideration of the interplay between the subcomponent geometry and solvent and electronic effects.

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host-guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R-PAC-2, S-PAC-2 (with Br substituents) and R-PAC-3, S-PAC-3 (with CH3 substituents) enantiomers. PAC-2, rather than PAC-3, achieves fullerene encapsulation and selective binding of C70 over C60 in fullerene carbon soot. More significantly, the occurrence of chiral induction between R-PAC-2, S-PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C70 selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.

Size Determination of Organic Cages by Diffusion NMR Spectroscopy

Reliable structure elucidation of covalent organic cage compounds remains challenging as routine analysis might leave ambiguities. Diffusion-ordered NMR spectroscopy (DOSY) allows insight into the molecular size and mass of the species present in solution, but a systematic evaluation of the diffusion behavior for cage assemblies is rarely considered. Here we report the synthesis of four series of covalent organic cages based on tribenzotriquinacenes and diboronic acids with varying geometry and exohedral substituents. We provide a guideline for the consistent measurement of diffusion coefficients from 1 H-DOSY NMR spectroscopy, which was utilized to study the diffusion behavior for the whole set of cages and selected examples from the literature. For structurally similar cages, a linear correlation between the solvodynamic volume and the molecular mass allows precise size determination. For more complex systems, multiple parameters, such as window size or rigid exohedral functionalization. further modulate cage diffusion in solution.

Recent advances in porous molecular cages for photocatalytic organic conversions

Photocatalytic organic conversion is considered an efficient, environmentally friendly, and energy-saving strategy for organic synthesis. In recent decades, the molecular cage has emerged as a creative functional material with broad applications in host-guest recognition, drug delivery, catalysis, intelligent materials and other fields. Based on the unique properties of porous molecular cage materials, they provide an ideal platform for leveraging pre-structuring in catalytic reactions and show great potential in various photocatalytic organic reactions. As a result, they have emerged as promising alternatives to conventional molecules or inorganic photocatalysts in redox processes. In this Review, the synthesis strategies based on coordination cages and organic cages, as well as their recent progress in photocatalytic organic conversion, are comprehensively summarized. Finally, we deliver the persistent challenges associated with porous molecular cage compounds that need to be overcome for further development in this field.

Porosity as a Design Element for Developing Catalytic Molecular Materials for Electrochemical and Photochemical Carbon Dioxide Reduction

The catalytic reduction of carbon dioxide (CO2 ) using sustainable energy inputs is a promising strategy for upcycling of atmospheric carbon into value-added chemical products. This goal has inspired the development of catalysts for selective and efficient CO2 conversion using electrochemical and photochemical methods. Among the diverse array of catalyst systems designed for this purpose, 2D and 3D platforms that feature porosity offer the potential to combine carbon capture and conversion. Included are covalent organic frameworks (COFs), metal-organic frameworks (MOFs), porous molecular cages, and other hybrid molecular materials developed to increase active site exposure, stability, and water compatibility while maintaining precise molecular tunability. This mini-review showcases catalysts for the CO2 reduction reaction (CO2 RR) that incorporate well-defined molecular elements integrated into porous materials structures. Selected examples provide insights into how different approaches to this overall design strategy can augment their electrocatalytic and/or photocatalytic CO2 reduction activity.

Redox Triggers Guest Release and Uptake Across a Series of Azopyridine-Based Metal-Organic Capsules

Precise control over guest release and recapture using external stimuli is a valuable goal, potentially enabling new modes of chemical purification. Including redox moieties within the ligand cores of molecular capsules to trigger the release and uptake of guests has proved effective, but this technique is limited to certain capsules and guests. Herein, the construction of a series of novel metal-organic capsules from ditopic, tritopic, and tetratopic ligands is demonstrated, all of which contain redox-active azo groups coordinated to FeII centers. Compared to their iminopyridine-based analogs, this new class of azopyridine-based capsules possesses larger cavities, capable of encapsulating more voluminous guests. Upon reduction of the capsules, their guests are released and may then be re-encapsulated when the capsules are regenerated by oxidation. Since the redox centers are on the ligand arms, they are modular and can be attached to a variety of ligand cores to afford varying and predictable architectures. This method thus shows promise as a generalized approach for designing redox-controlled guest release and uptake systems.

Hetero-Diels-Alder Reaction between Singlet Oxygen and Anthracene Drives Integrative Cage Self-Sorting

A ZnII8L6 pseudocube containing anthracene-centered ligands, a ZnII4L'4 tetrahedron with a similar side length as the cube, and a trigonal prism ZnII6L3L'2 were formed in equilibrium from a common set of subcomponents. Hetero-Diels-Alder reaction with photogenerated singlet oxygen transformed the anthracene-containing "L" ligands into endoperoxide "LO" ones and ultimately drove the integrative self-sorting to form the trigonal prismatic cage ZnII6LO3L'2 exclusively. This ZnII6LO3L'2 structure lost dioxygen in a retro-Diels-Alder reaction after heating, which resulted in reversion to the initial ZnII8L6 + ZnII4L'4 ⇌ 2 × ZnII6L3L'2 equilibrating system. Whereas the ZnII8L6 pseudocube had a cavity too small for guest encapsulation, the ZnII6L3L'2 and ZnII6LO3L'2 trigonal prisms possessed peanut-shaped internal cavities with two isolated compartments divided by bulky anthracene panels. Guest binding was also observed to drive the equilibrating system toward exclusive formation of the ZnII6L3L'2 structure, even in the absence of reaction with singlet oxygen.

Triplet-Triplet Annihilation Upconversion in a Porphyrinic Molecular Container

Triplet-triplet annihilation-based molecular photon upconversion (TTA-UC) is a photophysical phenomenon that can yield high-energy emitting photons from low-energy incident light. TTA-UC is believed to fuse two triplet excitons into a singlet exciton through several consecutive energy-conversion processes. When organic aromatic dyes─i.e., sensitizers and annihilators─are used in TTA-UC, intermolecular distances, as well as relative orientations between the two chromophores, are important in an attempt to attain high upconversion efficiencies. Herein, we demonstrate a host-guest strategy─e.g., a cage-like molecular container incorporating two porphyrinic sensitizers and encapsulating two perylene emitters inside its cavity─to harness photon upconversion. Central to this design is tailoring the cavity size (9.6-10.4 Å) of the molecular container so that it can host two annihilators with a suitable [π···π] distance (3.2-3.5 Å). The formation of a complex with a host:guest ratio of 1:2 between a porphyrinic molecular container and perylene was confirmed by NMR spectroscopy, mass spectrometry, and isothermal titration calorimetry (ITC) as well as by DFT calculations. We have obtained TTA-UC yielding blue emission at 470 nm when the complex is excited with low-energy photons. This proof-of-concept demonstrates that TTA-UC can take place in one supermolecule by bringing together the sensitizers and annihilators. Our investigations open up some new opportunities for addressing several issues associated with supramolecular photon upconversion, such as sample concentrations, molecular aggregation, and penetration depths, which have relevance to biological imaging applications.

Porous Organic Cages

Porous organic cages (POCs) are a relatively new class of low-density crystalline materials that have emerged as a versatile platform for investigating molecular recognition, gas storage and separation, and proton conduction, with potential applications in the fields of porous liquids, highly permeable membranes, heterogeneous catalysis, and microreactors. In common with highly extended porous structures, such as metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and porous organic polymers (POPs), POCs possess all of the advantages of highly specific surface areas, porosities, open pore channels, and tunable structures. In addition, they have discrete molecular structures and exhibit good to excellent solubilities in common solvents, enabling their solution dispersibility and processability─properties that are not readily available in the case of the well-established, insoluble, extended porous frameworks. Here, we present a critical review summarizing in detail recent progress and breakthroughs─especially during the past five years─of all the POCs while taking a close look at their strategic design, precise synthesis, including both irreversible bond-forming chemistry and dynamic covalent chemistry, advanced characterization, and diverse applications. We highlight representative POC examples in an attempt to gain some understanding of their structure-function relationships. We also discuss future challenges and opportunities in the design, synthesis, characterization, and application of POCs. We anticipate that this review will be useful to researchers working in this field when it comes to designing and developing new POCs with desired functions.

Encapsulating Semiconductor Quantum Dots in Supramolecular Cages Enables Ultrafast Guest-Host Electron and Vibrational Energy Transfer

In the field of supramolecular chemistry, host-guest systems have been extensively explored to encapsulate a wide range of substrates, owing to emerging functionalities in nanoconfined space that cannot be achieved in dilute solutions. However, host-guest chemistry is still limited to encapsulation of small guests. Herein, we construct a water-soluble metallo-supramolecular hexagonal prism with a large hydrophobic cavity by anchoring multiple polyethylene glycol chains onto the building blocks. Then, assembled prisms are able to encapsulate quantum dots (QDs) with diameters of less than 5.0 nm. Furthermore, we find that the supramolecular cage around each QD strongly modifies the photophysics of the QD by universally increasing the rates of QD relaxation processes via ultrafast electron and vibrational energy transfer. Taken together, these efforts expand the scope of substrates in host-guest systems and provide a new approach to tune the optical properties of QDs.

Aggregation-Induced Emission Metallocuboctahedra for White Light Devices

Materials for organic light-emitting devices which exhibit superior emission properties in both the solution and solid states with a high fluorescence quantum yield have been extensively sought after. Herein, two metallocages, S1 and S2, were constructed, and both showed typical aggregation-induced emission (AIE) features with intense yellow fluorescence. By adding blue-emissive 9,10-dimethylanthracene, pure white light emission can be produced in the solution of S1 and S2. Furthermore, due to the remarkable AIE feature and good fluorescence quantum yield in the solid state, metallocages are highly emissive in the solid state and can be utilized to coat blue LED bulbs or integrate with blue-emitting chips to obtain white light. This study advances the usage of metallocages as practical solid-state fluorescent materials and provides a fresh perspective on highly emissive AIE materials.

Host Spin-Crossover Thermodynamics Indicate Guest Fit

Spin-crossover (SCO) metal-organic cages capable of switching between high-spin and low-spin states have the potential to be used as magnetic sensors and switches. Variation of the donor strength of heterocyclic aldehyde subcomponents in imine-based ligands can tune the ligand field for a FeII center, which results in both homoleptic and heteroleptic cages with diverse SCO behaviors. The tetrahedral SCO cage built from 1-methyl-1H-imidazole-2-carbaldehyde is capable of encapsulating various guests, which stabilize different cage spin states depending on guest size. Conversely, the SCO tetrahedron exhibits different affinities for guests in different spin states, which is inferred to result from subtle structural differences of the cavity caused by the change in metal center spin state. Examination of SCO thermodynamics across a series of host-guest complexes enabled sensitive probing of guest fit to the host cavity, providing information complementary to binding-constant determination.

Purely Covalent Molecular Cages and Containers for Guest Encapsulation

Cage compounds offer unique binding pockets similar to enzyme-binding sites, which can be customized in terms of size, shape, and functional groups to point toward the cavity and many other parameters. Different synthetic strategies have been developed to create a toolkit of methods that allow preparing tailor-made organic cages for a number of distinct applications, such as gas separation, molecular recognition, molecular encapsulation, hosts for catalysis, etc. These examples show the versatility and high selectivity that can be achieved using cages, which is impossible by employing other molecular systems. This review explores the progress made in the field of fully organic molecular cages and containers by focusing on the properties of the cavity and their application to encapsulate guests.

Ultrasmall Nanodiamonds: Perspectives and Questions

Nanodiamonds are at the heart of a plethora of emerging applications in areas ranging from nanocomposites and tribology to nanomedicine and quantum sensing. The development of alternative synthesis methods, a better understanding, and the availability of ultrasmall nanodiamonds of less than 3 nm size with a precisely engineered composition, including the particle surface and atomic defects in the diamond crystal lattice, would mark a leap forward for many existing and future applications. Yet today, we are unable to accurately control nanodiamond composition at the atomic scale, nor can we reliably create and isolate particles in this size range. In this perspective, we discuss recent advances, challenges, and opportunities in the synthesis, characterization, and application of ultrasmall nanodiamonds. We particularly focus on the advantages of bottom-up synthesis of these particles and critically assess the physicochemical properties of ultrasmall nanodiamonds, which significantly differ from those of larger particles and bulk diamond.

Supramolecular cuboctahedra with aggregation-induced emission enhancement and external binding ability

Beyond the AIE (aggregation-induced emission) phenomenon in small molecules, supramolecules with AIE properties have evolved in the AIE family and accelerated the growth of supramolecular application diversity. Inspired by its mechanism, particularly the RIV (restriction of intramolecular vibrations) process, a feasible strategy of constructing an AIE-supramolecular cage based on the oxidation of sulfur atoms and coordination of metals is presented. In contrast to previous strategies that used molecular stacking to limit molecular vibrations, we achieved the desired goal using the synergistic effects of coordination-driven self-assembly and oxidation. Upon assembling with zinc ions, S1 was endowed with a distinct AIE property compared with its ligand L1, while S2 exhibited a remarkable fluorescence enhancement compared to L2. Also, the single cage-sized nanowire structure of supramolecules was obtained via directional electrostatic interactions with multiple anions and rigid-shaped cationic cages. Moreover, the adducts of zinc porphyrin and supramolecules were investigated and characterized by 2D DOSY, ESI-MS, TWIM-MS, UV-vis, and fluorescence spectroscopy. The protocol described here enriches the ongoing research on tunable fluorescence materials and paves the way towards constructing stimuli-responsive luminescent supramolecular cages.

Beyond the AIE (aggregation-induced emission) phenomenon in small molecules, supramolecules with AIE properties have evolved in the AIE family and accelerated the growth of supramolecular application diversity.

Oligopyrrolic Cages: From Classic Molecular Constructs to Chemically Responsive Polytopic Receptors

Conspectus"Functional molecular systems", discrete and self-assembled constructs where control over molecular recognition, structure, bonding, transport, release, catalytic activity, etc., is readily achieved, are a topic of current interest. Within this broad paradigm, oligopyrrolic cages have garnered attention due to their responsive recognition features. Due to the presence of slightly polar pyrrole subunits which can also behave as hydrogen-bonding donors, these oligopyrrolic cages are potential receptors for various polarized species. In this Account, we summarize recent advances involving the syntheses and study of (1) covalent oligopyrrolic macrobicyclic cages, (2) oligopyrrolic metallacages, and (3) oligopyrrolic noncovalently linked cages. Considered in concert, these molecular constructs have allowed advances in applied supramolecular chemistry; to date, they have been exploited for selective guest encapsulation studies, anion binding and ion-channel formation, and gas absorption, among other applications. While key findings from others will be noted, in this Account will focus on our own contributions to the chemistry of discrete oligopyrrolic macrocycles and their use in supramolecular host-guest chemistry and sensing applications. In terms of specifics, we will detail how oligopyrrole cages with well-defined molecular geometries permit reversible guest binding under ambient conditions and how the incorporation of pyrrole subunits within larger superstructures allows effective control over anion/conjugate acid binding activity under ambient conditions. We will also provide examples that show how derivatization of these rudimentary macrocyclic cores with various sterically congested β-substituted oligopyrroles can provide entry into more complex supramolecular architectures. In addition, we will detail how hybrid systems that include heterocycles other than pyrrole, such as pyridine and naphthyridine, can be used to create self-assembled materials that show promise as gas-absorbing materials and colorimetric reversible sensors. Studies involving oligopyrrolic polymetallic cages and oligopyrrolic supramolecular cages will also be reviewed. First, we will discuss all-carbon-linked oligopyrrolic bicycles and continue on to present systems linked via amines and imines linkages. Finally, we will summarize recent work on pyrrolic cages created through the use of metal centers or various noncovalent interactions. We hope that this Account will provide researchers with an initial foundation for understanding oligopyrrolic cage chemistry, thereby allowing for further advances in the area. It is expected that the fundamental design and recognition principles made in the area of oligopyrrole cages, as exemplified by our contributions, will be of general use to researchers targeting the design of functional molecular systems. As such, we have structured this Account so as to summarize the past while setting the stage for the future.

Chiral proline-substituted porous organic cages in asymmetric organocatalysis

The efficient preparation of chiral porous organic cages (POCs) with specific functions is challenging, and their application in asymmetric catalysis has not previously been explored. In this work, we have achieved the construction of chiral POCs based on a supramolecular tetraformyl-resorcin[4]arene scaffold with different chiral proline-modified diamine ligands and utilizing dynamic imine chemistry. The incorporation of V-shaped or linear chiral diamines affords the [4 + 8] square prism and [6 + 12] octahedral POCs respectively. The appended chiral proline moieties in such POCs make them highly active supramolecular nanoreactors for asymmetric aldol reactions, delivering up to 92% ee. The spatial distribution of chiral catalytic sites in these two types of POCs greatly affects their catalytic activities and enantioselectivities. This work not only lays a foundation for the asymmetric catalytic application of chiral POCs, but also contributes to our understanding of the catalytic function of biomimetic supramolecular systems.

Enhanced Biological Imaging via Aggregation-Induced Emission Active Porous Organic Cages

Porous organic cages (POCs) have many advantages, including superior microenvironments, good monodispersity, and shape homogeneity, excellent molecular solubility, high chemical stability, and intriguing host-guest chemistry. These properties enable POCs to overcome the limitations of extended porous networks such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). However, the applications of POCs in bioimaging remain limited due to the problems associated with their rigid and hydrophobic structures, thus leading to strong aggregation-caused quenching (ACQ) in aqueous biological media. To address this challenge, we report the preparation of aggregation-induced emission (AIE)-active POCs capable of stimuli responsiveness for enhanced bioimaging. We rationally design a hydrophilic, structurally flexible tetraphenylethylene (TPE)-based POC that is almost entirely soluble in aqueous solutions. This POC's conformationally flexible superstructure allows the dynamic rotation of the TPE-based phenyl rings, thus endowing impressive AIE characteristics for responses to environmental changes such as temperature and viscosity. We employ these notable features in the bioimaging of living cells and obtain good performance, demonstrating that the present AIE-active POCs are suitable candidates for further biological applications.

Visible Light-Induced Aerobic Oxidative Dehydrogenation of C-N/C-O to C=N/C=O Bonds Using Metal-Free Photocatalysts: Recent Developments

Performing synthetic transformation using visible light as energy source, in the presence of a photocatalyst as a promoter, is currently of high interest, and oxidation reactions carried out under these conditions using oxygen as the final oxidant are particularly convenient from an environmental point of view. This review summarizes the recent developments achieved in the oxidative dehydrogenation of C-N and C-O bonds, leading to C=N and C=O bonds, respectively, using air or pure oxygen as oxidant and metal-free homogeneous or recyclable heterogeneous photocatalysts under visible light irradiation.

Stimuli-Responsive Porous Molecular Crystal with Reversible Modulation of Porosity

Responsive materials have received much attention due to modulated properties under stimuli such as light, heat, and electricity. A photoresponsive porous molecular crystal (1) has been assembled from a racemic dithienylethene-cage (L) by multiple C-F···H-C hydrogen bonds and van der Waals forces according to crystallographic investigation. Electronic absorption spectroscopy reveals reversible photochromic behaviors of the solution and film forms of enantiomeric L upon UV and visible light irradiation due to photoisomerization of dithienylethene units. X-ray photoelectron spectroscopy (XPS), in combination with NMR, discloses the quantitative photoisomerization of photochromic dithienylethene moieties. Moreover, the porosity of 1 is modulated by UV irradiation based on gas sorption data. Interestingly, heating the irradiated sample of 1 in 1,4-dioxane leads to recovered porosity due to the recovered cage molecular structure and maintained periodic frameworks.

Photophysical Behaviors of Shape-persistent Zinc Porphyrin Organic Cage

A pair chiral metallic porphyrin cages, (R)/(S)-PTC-1(Zn), have been afforded by pure chiral cyclohexanediamine reacting with zinc 5,15-di[3',5'-diformyl-(1,1'-biphenyl)]porphyrin. Both their chiral tubular structures have been demonstrated with single crystal diffraction...

Recent advances in the applications of porous organic cages

Porous organic cages (POCs) have emerged as a new sub-class of porous materials that stand out by virtue of their tunability, modularity, and processibility. Similar to other porous materials such...

Structural Chemistry of Giant Metal Based Supramolecules

The review presents a bird-eye view on the state of research in the field of giant nonbiological discrete metal complexes and ions of nanometer size, which are structurally characterized by means of single-crystal X-ray diffraction, using the crystal structure as a common key feature. The discussion is focused on the main structural features of the metal clusters, the clusters containing compact metal oxide/hydroxide/chalcogenide core, ligand-based metal-organic cages, and supramolecules as well as on the aspects related to the packing of the molecules or ions in the crystal and the methodological aspects of the single-crystal neutron and X-ray diffraction of these compounds.

Water-stable hydrazone-linked porous organic cages

Although porous organic cages (POCs), particularly imine-linked (C[double bond, length as m-dash]N) ones, have advanced significantly over the last few decades, the reversible nature of imine linkages makes them prone to hydrolysis and structural collapse, severely limiting their applications under moist or water conditions. Herein, seven water-stable hydrazone-linked (C[double bond, length as m-dash]N-N) POCs are prepared through a simple coupling of the same supramolecular tetraformylresorcin[4]arene cavitand with different dihydrazide linkers. Their structures are all determined by single-crystal X-ray crystallography, demonstrating rich structural diversity from the [2 + 4] lantern, [3 + 6] triangular prism, and unprecedented [4 + 8] square prism to the extra-large [6 + 12] octahedron. In addition, they respectively exhibit tunable window diameters and cavity volumes ranging from about 5.4 to 11.1 nm and 580 to 6800 ų. Moreover, their application in the water environment for pollutant removal was explored, indicating that they can effectively eliminate various types of contaminants from water, including radionuclide waste, toxic heavy metal ions, and organic micropollutants. This work demonstrates a convenient method for rationally constructing versatile robust POCs and presents their great application potentialities in water medium.

One-pot Synthesis of a Truncated Cone-shaped Porphyrin Macrocycle and Its Self-assembly into Permanent Porous Material

Here, we report the synthesis of a truncated cone-shaped triangular porphyrinic macrocycle, P₃ L₃ , via a single step imine condensation of a cis-diaminophenylporphyrin and a bent dialdehyde-based linker as building units. X-ray diffraction analysis reveals that the truncated cone-shaped P₃ L₃ molecules are stacked on top of each other by π⋯π and CH⋯π interactions, to form 1.7 nm wide hollow columns in the solid state. The formation of the triangular macrocycle is corroborated by quantum chemical calculations. The permanent porosity of the P₃ L₃ crystals is demonstrated by several gas sorption experiments and powder X-ray diffraction analysis.

Isoreticular Crystallization of Highly Porous Cubic Covalent Organic Cage Compounds*

Modular frameworks featuring well-defined pore structures in microscale domains establish tailor-made porous materials. For open molecular solids however, maintaining long-range order after desolvation is inherently challenging, since packing is usually governed by only a few supramolecular interactions. Here we report on two series of nanocubes obtained by co-condensation of two different hexahydroxy tribenzotriquinacenes (TBTQs) and benzene-1,4-diboronic acids (BDBAs) with varying linear alkyl chains in 2,5-position. n-Butyl groups at the apical position of the TBTQ vertices yielded soluble model compounds, which were analyzed by mass spectrometry and NMR spectroscopy. In contrast, methyl-substituted cages spontaneously crystallized as isostructural and highly porous solids with BET surface areas and pore volumes of up to 3426 m2  g-1 and 1.84 cm3  g-1 . Single crystal X-ray diffraction and sorption measurements revealed an intricate cubic arrangement of alternating micro- and mesopores in the range of 0.97-2.2 nm that are fine-tuned by the alkyl substituents at the BDBA linker.

Cucurbitimines - imine cages with concave walls

The variety of shape-persistent organic cages by imine bond formation has tremendously enlarged in recent years by using different building blocks (aldehydes and amines) in the condensation reactions. Here, we describe the use of a kinked tetraldehyde to generate pumpkin-shaped cages with concave walls, similar to cucurbiturils.

Kinked tetraaldehyde building blocks lead in condensation reactions with diamines to pumpkin shaped cages – the cucurbitimines.

One-Pot and Shape-Controlled Synthesis of Organic Cages

Organic cages are fascinating because of their well-defined 3D cavities, excellent stability, and accessible post-modification. However, the synthesis is normally realized by fragment coupling approach in low yields. Herein, we report one-pot, gram-scale and shape-controlled synthesis of two covalent organic cages (box-shaped [4]cage and triangular prism-shaped [2]cage) in yields of 46 % and 52 %, involving direct condensation of triangular 1,3,5-tris(2,4-dimethoxyphenyl)benzene monomer with paraformaldehyde and isobutyraldehyde, respectively. The cages can convert into high-yielding per-hydroxylated analogues. The [2]cage can be utilized as gas chromatographic stationary phase for high-resolution separation of benzene/cyclohexane and toluene/methylcyclohexane. By changing the central moiety of the triangular monomer and/or aldehyde, this synthetic method would have the potential to be a general strategy to access diverse cages with tunable shape, size, and electronic properties.

A curved host and second guest cooperatively inhibit the dynamic motion of corannulene

Biomolecular systems show how host-guest binding can induce changes in molecular behavior, which in turn impact the functions of the system. Here we report an artificial host-guest system where dynamic adaptation during guest binding alters both host conformation and guest dynamics. The self-assembled cage host employed here possesses concave walls and a chirotopic cavity. Complementarity between the curved surfaces of fullerenes and the inner surface of the host cavity leads the host to reconfigure stereochemically in order to bind these guests optimally. The curved molecule corannulene undergoes rapid bowl-to-bowl inversion at room temperature. Its inversion barrier is increased upon binding, however, and increased further upon formation of a ternary complex, where corannulene and a cycloalkane are both bound together. The chiral nature of the host also leads to clear differences in the NMR spectra of ternary complexes involving corannulene and one or the other enantiomer of a chiral guest, which enables the determination of enantiomeric excess by NMR.

Hierarchically Porous Organic Cages

Imparting mesopores to organic cages of an intrinsic microporous nature to build up hierarchically porous cage soft materials is a grand challenge and will reshape the property and application scope of traditional organic cage molecules. Herein, we discovered how to engineer mesopores into microporous organic cages via their host-guest interactions with long chain ionic surfactants. Equally important, the ionic head of surfactants equips the supramolecularly assembled porous structures with charge-selective uptake and release function in solution. Interestingly, such hierarchically porous organic cage can serve as a nanoreactor once trapping enzymes within the cavity, which show 5-fold enhanced activity of enzymatic catalysis when compared with the free enzymes.