Carbohydrate amphiphiles for supramolecular biomaterials: Design, self-assembly, and applications

Alkaline Phosphatase-Instructed Peptide Assemblies for Imaging and Therapeutic Applications

Self-assembly, a powerful strategy for constructing highly stable and well-ordered supramolecular structures, widely exists in nature and in living systems. Peptides are frequently used as building blocks in the self-assembly process due to their advantageous characteristics, such as ease of synthesis, tunable mechanical stability, good biosafety, and biodegradability. Among the initiators for peptide self-assembly, enzymes are excellent candidates for guiding this process under mild reaction conditions. As a crucial and commonly used biomarker, alkaline phosphatase (ALP) cleaves phosphate groups, triggering a hydrophilicity-to-hydrophobicity transformation that induces peptide self-assembly. In recent years, ALP-instructed peptide self-assembly has made breakthroughs in biological imaging and therapy, inspiring the development of self-assembly biomaterials for diagnosis and therapeutics. In this review, we highlight the most recent advancements in ALP-instructed peptide assemblies and provide perspectives on their potential impact. Finally, we briefly discuss the ongoing challenges for future research in this field.

Oxidation-Responsive Supramolecular Hydrogels Based on Glucosamine Derivatives with an Aryl Sulfide Group

Supramolecular hydrogels can be obtained via self-assembly of small molecules in aqueous environments. In this study, we describe the development of oxidation-responsive supramolecular hydrogels comprising glucosamine derivatives with an aryl sulfide group. We demonstrate that hydrogen peroxide can induce a gel-sol transition through the oxidation of the sulfide group to the corresponding sulfoxide. Furthermore, we show that this oxidation responsiveness can be extended to photo-responsiveness with the aid of a photosensitizer.

Microwave-Assisted Synthesis of β-N-Aryl Glycoamphiphiles with Diverse Supramolecular Assemblies and Lectin Accessibility

Glycoamphiphiles have attracted considerable interest in a broad range of application fields owing to their solution and bulk-state self-assembly abilities. Despite their importance, the straightforward synthesis of glycoamphiphiles consisting of a hydrophilic carbohydrate linked to a hydrophobic aglycone remains one of the major challenges in glycosciences. Here, a rapid, simple, and efficient synthetic access to chemically stable glycoamphiphiles at physiological pH, namely, N-(β-d-glycosyl)-2-alkylbenzamide, is reported. It leverages the nonreductive amination of unprotected carbohydrates with ortho-substituted aniline derivatives which could be readily obtained by reacting commercially available primary alkylamines with isatoic anhydride. This strategy avoids protection and deprotection of sugar hydroxyl groups and the use of reductive agents, which makes it advantageous in terms of atom and step economy. Moreover, in order to circumvent the cons of classical N-aryl glycosylation, we investigate the use of microwave as a heat source that provides fast, clean, and high-yield β-N-arylation of unprotected carbohydrates. Their self-assembly into water led to multiple morphologies of dynamic supramolecular glycoamphiphiles that were characterized to assess their ability to bind to lectins from pathogenic bacteria. Biophysical interactions probed by isothermal titration microcalorimetry revealed micromolar affinities for most of the synthesized glycoamphiphiles.

Glucopeptide Superstructure Hydrogel Promotes Surgical Wound Healing Following Neoadjuvant Radiotherapy by Producing NO and Anticellular Senescence

Neoadjuvant radiotherapy, a preoperative intervention regimen for reducing the stage of primary tumors and surgical margins, has gained increasing attention in the past decade. However, radiation-induced skin damage during neoadjuvant radiotherapy exacerbates surgical injury, remarkably increasing the risk of refractory wounds and compromising the therapeutic effects. Radiation impedes wound healing by increasing the production of reactive oxygen species and inducing cell apoptosis and senescence. Here, a self-assembling peptide (R-peptide) and hyaluronic-acid (HA)-based and cordycepin-loaded superstructure hydrogel is prepared for surgical incision healing after neoadjuvant radiotherapy. Results show that i) R-peptide coassembles with HA to form biomimetic fiber bundle microstructure, in which R-peptide drives the assembly of single fiber through π-π stacking and other forces and HA, as a single fiber adhesive, facilitates bunching through electrostatic interactions. ii) The biomimetic superstructure contributes to the adhesion and proliferation of cells in the surgical wound. iii) Aldehyde-modified HA provides dynamic covalent binding sites for cordycepin to achieve responsive release, inhibiting radiation-induced cellular senescence. iv) Arginine in the peptides provides antioxidant capacity and a substrate for the endogenous production of nitric oxide to promote wound healing and angiogenesis of surgical wounds after neoadjuvant radiotherapy.

Cooling rate uncovers epimer-dependent supramolecular organization of carbohydrate amphiphiles

We show distinct CH-π interactions and assembly pathways for the amphiphile N-(fluorenylmethoxycarbonyl)-galactosamine and its epimer N-(fluorenylmethoxycarbonyl)-glucosamine. These differences result in the formation of supramolecular nanofibrous systems with opposite chirality. Our results showcase the importance of the carbohydrates structural diversity for their specific biointeractions and the opportunity that their ample interactome offers for synthesis of versatile and tunable supramolecular (bio) materials.

Self-Assembly of Polymers and Their Applications in the Fields of Biomedicine and Materials

Polymer self-assembly can prepare various shapes and sizes of pores, making it widely used. The complexity and diversity of biomolecules make them a unique class of building blocks for precise assembly. They are particularly suitable for the new generation of biomaterials integrated with life systems as they possess inherent characteristics such as accurate identification, self-organization, and adaptability. Therefore, many excellent methods developed have led to various practical results. At the same time, the development of advanced science and technology has also expanded the application scope of self-assembly of synthetic polymers. By utilizing this technology, materials with unique shapes and properties can be prepared and applied in the field of tissue engineering. Nanomaterials with transparent and conductive properties can be prepared and applied in fields such as electronic displays and smart glass. Multi-dimensional, controllable, and multi-level self-assembly between nanostructures has been achieved through quantitative control of polymer dosage and combination, chemical modification, and composite methods. Here, we list the classic applications of natural- and artificially synthesized polymer self-assembly in the fields of biomedicine and materials, introduce the cutting-edge technologies involved in these applications, and discuss in-depth the advantages, disadvantages, and future development directions of each type of polymer self-assembly.

Design and synthesis of a nucleobase functionalized peptide hydrogel: in vitro assessment of anti-inflammatory and wound healing effects

Over the past several years, a significant increase in the expanding field of biomaterial sciences has been observed due to the development of biocompatible materials based on peptide derivatives that have intrinsic therapeutic potential. In this report, we synthesized nucleobase functionalized peptide derivatives (NPs). Hydrogelation in the synthesized NPs was induced by increasing their hydrophobicity with an aromatic moiety. The aggregation behavior of the NPs was analyzed by performing molecular dynamics simulations and DOSY NMR experiments. We performed circular dichroism (CD), thioflavin-T binding and PXRD to characterize the supramolecular aggregation in the NP1 hydrogel. The mechanical strength of the NP1 hydrogel was tested by performing rheological experiments. TEM and SEM experiments were performed to investigate the morphology of the NP1 hydrogel. The biocompatibility of the newly synthesized NP1 hydrogel was investigated using McCoy and A549 cell lines. The hemolytic activity of the NP1 hydrogel was examined in human blood cells. The stability of the newly formed NP1 hydrogel was examined using proteinase K and α-chymotrypsin. The NP1 hydrogel was used for in vitro wound healing. Western blotting, qRT-PCR and DCFDA assay were performed to determine the anti-inflammatory activity of the NP1 hydrogel. The synthesized NP1 hydrogel also exhibits antibacterial efficacy.

Synthetic approaches of carbohydrate based self-assembling systems

Carbohydrate-based self-assembling systems are essential for the formation of advanced biocompatible materials via a bottom-up approach. The self-assembling of sugar-based small molecules has applications encompassing many research fields and has been studied extensively. In this focused review, we will discuss the synthetic approaches for carbohydrate-based self-assembling (SA) systems, the mechanisms of the assembly, as well as the main properties and applications. This review will mainly cover recent publications in the last four years from January 2020 to December 2023. We will essentially focus on small molecule self-assembly, excluding polymer-based systems, which include various derivatives of monosaccharides, disaccharides, and oligosaccharides. Glycolipids, glycopeptides, and some glycoconjugate-based systems are discussed. Typically, in each category of systems, the system that can function as low molecular weight gelators (LMWGs) will be discussed first, followed by self-assembling systems that produce micelles and aggregates. The last section of the review discusses stimulus-responsive self-assembling systems, especially those forming gels, including dynamic covalent assemblies, chemical-triggered systems, and photoresponsive systems. The review will be organized based on the sugar structures, and in each category, the synthesis of representative molecular systems will be discussed next, followed by the properties of the resulting molecular assemblies.

Macronutrient and PFOS bioavailability manipulated by aeration-driven rhizospheric organic nanocapsular assembly

Ubiquitous presence of the extremely persistent pollutants, per- and polyfluoroalkyl substances, is drawing ever-increasing concerns for their high eco-environmental risks which, however, are insufficiently considered based on the assembly characteristics of those amphiphilic molecules in environment. This study investigated the re-organization and self-assembly of perfluorooctane sulfonate (PFOS) and macronutrient molecules from rhizospheric organic (RhO) matter induced with a common operation of aeration. Atomic force microscopy (AFM) with infrared spectroscopy (IR)-mapping clearly showed that, after aeration and stabilization, RhO nanocapsules (∼ 1000 nm or smaller) with a core of PFOS-protein complexes coated by "lipid-carbohydrate" layers were observed whereas the capsule structure with a lipid core surrounded by "protein-carbohydrate-protein" multilayers was obtained in the absence of PFOS. It is aeration that exerted the disassociation of pristine RhO components, after which the environmental concentration PFOS restructured the self-assembly structure in a conspicuous "disorder-to-order" transition. AFM IR-mapping analysis of faeces combined with quantification of component uptake denoted the decreased ingestion and utilization of both PFOS and proteins compared with lipids and carbohydrates when Daphnia magna were fed with RhO nanocapsules. RhO nanocapsules acted as double-edged swords via simultaneously impeding the bioaccessibility of hazardous PFOS molecules and macronutrient proteins; and the latter might be more significant, which caused a malnutrition status within merely 48 h. Elucidating the assembly structure of natural organic matter and environmental concentration PFOS, the finding of this work could be a crucial supplementation to the high-dose-dependent eco-effect investigations on PFOS.

Controlling the Assembly of Cellulose-Based Oligosaccharides through Sequence Modifications

Peptides and nucleic acids with programmable sequences are widely explored for the production of tunable, self-assembling functional materials. Herein we demonstrate that the primary sequence of oligosaccharides can be designed to access materials with tunable shapes and properties. Synthetic cellulose-based oligomers were assembled into 2D or 3D rod-like crystallites. Sequence modifications within the oligosaccharide core influenced the molecular packing and led to the formation of square-like assemblies based on the rare cellulose IVII allomorph. In contrast, modifications at the termini generated elongated aggregates with tunable surfaces, resulting in self-healing supramolecular hydrogels.

Co-assembly-mediated biosupramolecular catalysis: thermodynamic insights into nucleobase specific (oligo)nucleotide attachment and cleavage

Gaining control over the stability and cleavage of phosphoester and phosphodiester remains a matter of interest for their application in biotechnology to oligonucleotide-based therapeutics. Herein, we report an efficient unactivated phosphoester hydrolysis (stable mono/di/tri/cyclic nucleotide to nucleoside conversion) via a biosupramolecular system comprising of a non-covalent complex of enzyme, alkaline phosphatase (ALP), and Zn(II)-metallosurfactant. We also demonstrate the nucleobase selective activation or inhibition of ALP-mediated oligonucleotide digestion process using that complex. The higher binding affinity of Zn(II)-containing headgroup with phosphate-containing substrate enhanced the effective substrate concentration surrounding the enzyme, which, in turn, results in a drastic decrease in the Michaelis constant (KM), along with an increase in the turnover (kcat). The catalytic activation or inhibition of nucleobase-specific oligonucleotide digestion depends on the hydration, localization of the substrates, and viscosity of the resultant co-assembly upon substrate binding with the enzyme-metallosurfactant complex. Additionally, through isothermal titration calorimetry experiment, we demonstrate enthalpy-entropy change during both the supramolecular binding of (oligo)nucleotides and simultaneous activation/inhibition in catalytic cleavage. Overall, it showed the possible modularity of Zn(II)-mediated biosupramolecular interaction, describing intrinsic thermodynamic aspects in developing complex biocatalytic circuits with nucleobase-specific oligonucleotides inputs, which are relevant in designing nucleic acid-based cargo for drug delivery and bioimaging.

Linker length-dependent morphologies in self-assembled structures of anthracene glucosides

Anthracenemethyl glucosides, that possess ethylene glycol linkers connecting the glucoside with anthracene moiety, are studied herein. Koenigs-Knorr glycosylation of ethylene glycol-tethered anthracene with acetobromo glucose, followed by removal of the protecting groups, lead to the facile formation of the target glucosides. Aq. solutions of these anthracene glucosides readily undergo self-assembly, with critical aggregation concentration varying between 0.4 and 1 mM, depending on the linker, being ethylene-, di- and tetraethylene glycol, as assessed by photophysical evaluations. Circular dichroism spectra show chiral self-assembled structures for these glucosides in solution, from which a left-handed chirality is adjudged. Morphologies of the self-assembled structures of these glucosides are controlled by the linker length. With the ethylene glycol linker, vesicles form initially, around which tendrils start to grow as the concentration of the glucoside is increased. Whereas, di- and tetraethylene glycol-spaced glucosides prefer agglomerated fractal-like structures, as assessed by microscopies. The aggregation phenomenon in the latter glucosides appears to be under the non-equilibrium-driven, dissipative control.

Material matters: exploring the interplay between natural biomaterials and host immune system

Biomaterials are widely used for various medical purposes, for instance, implants, tissue engineering, medical devices, and drug delivery systems. Natural biomaterials can be obtained from proteins, carbohydrates, and cell-specific sources. However, when these biomaterials are introduced into the body, they trigger an immune response which may lead to rejection and failure of the implanted device or tissue. The immune system recognizes natural biomaterials as foreign substances and triggers the activation of several immune cells, for instance, macrophages, dendritic cells, and T cells. These cells release pro-inflammatory cytokines and chemokines, which recruit other immune cells to the implantation site. The activation of the immune system can lead to an inflammatory response, which can be beneficial or detrimental, depending on the type of natural biomaterial and the extent of the immune response. These biomaterials can also influence the immune response by modulating the behavior of immune cells. For example, biomaterials with specific surface properties, such as charge and hydrophobicity, can affect the activation and differentiation of immune cells. Additionally, biomaterials can be engineered to release immunomodulatory factors, such as anti-inflammatory cytokines, to promote a tolerogenic immune response. In conclusion, the interaction between biomaterials and the body's immune system is an intricate procedure with potential consequences for the effectiveness of therapeutics and medical devices. A better understanding of this interplay can help to design biomaterials that promote favorable immune responses and minimize adverse reactions.

Tools to enable the study and translation of supramolecular amphiphiles

This tutorial review focuses on providing a summary of the key techniques used for the characterisation of supramolecular amphiphiles and their self-assembled aggregates; from the understanding of low-level molecular interactions, to materials analysis, use of data to support computer-aided molecular design and finally, the translation of this class of compounds for real world application, specifically within the clinical setting. We highlight the common methodologies used for the study of traditional amphiphiles and build to provide specific examples that enable the study of specialist supramolecular systems. This includes the use of nuclear magnetic resonance spectroscopy, mass spectrometry, X-ray scattering techniques (small- and wide-angle X-ray scattering and single crystal X-ray diffraction), critical aggregation (or micelle) concentration determination methodologies, machine learning, and various microscopy techniques. Furthermore, this review provides guidance for working with supramolecular amphiphiles in in vitro and in vivo settings, as well as the use of accessible software programs, to facilitate screening and selection of druggable molecules. Each section provides: a methodology overview - information that may be derived from the use of the methodology described; a case study - examples for the application of these methodologies; and a summary section - providing methodology specific benefits, limitations and future applications.

Doxorubicin covalently conjugated heparin displays anti-cancer activity as a self-assembled nanoparticle with a low-anticoagulant effect

Heparin is a glycosaminoglycans (GAGs) member and well-known FDA-approved anticoagulant that has been widely used in the clinic for 100 years. It has also been evaluated in various fields for further clinical applications, such as in anti-cancer or anti-inflammatory therapy beyond its anticoagulant effect. Here, we sought to utilize heparin molecules as drug carriers by directly conjugating the anticancer drug doxorubicin to the carboxyl group of unfractionated heparin. Given the molecular action of doxorubicin in intercalating DNA, it is expected to be less effective when structurally combined with other molecules. However, by utilizing doxorubicin molecules to produce reactive oxygen species (ROS), we found that the heparin-doxorubicin conjugates have significant cytotoxic ability to kill CT26 tumor cells with low anticoagulant activity. Several doxorubicin molecules were bound to heparin to provide sufficient cytotoxic capability and self-assembly ability due to their amphiphilic properties. The self-assembled formation of these nanoparticles was demonstrated through DLS, SEM and TEM. The cytotoxic ROS-generating doxorubicin-conjugated heparins could inhibit tumor growth and metastasis in CT26-bearing Balb/c animal models. Our results demonstrate that this cytotoxic doxorubicin-based heparin conjugate can significantly inhibit tumor growth and metastasis, thus showing promise as a potential new anti-cancer therapeutic.

Drug-Embedded Nanovesicles Assembled from Peptide-Decorated Hyaluronic Acid for Rheumatoid Arthritis Synergistic Therapy

Rheumatoid arthritis (RA) is a chronic inflammatory autoimmune disease that causes endless pain and poor quality of life in patients. Usage of a lubricant combined with anti-inflammatory therapy is considered a reasonable and effective approach for the treatment of RA. Herein, inspired by glycopeptides, a peptide-decorated hyaluronic acid was synthesized, and the grafted Fmoc-phenylalanine-phenylalanine-COOH (FmocFF) peptide self-assembled with β-sheet conformations could induce the folding of polymer molecular chains to form a vesicle structure in aqueous solution. The hydrophobic anti-inflammatory drug curcumin (Cur) could be embedded in the vesicle walls through π-π interactions with the FmocFF peptide. Furthermore, the inflammation suppression function of the Cur-loaded vesicles both in vitro and in vivo was demonstrated to be an effective treatment for RA therapy. This work proposes new insights into the folding and hierarchical assembly of glycopeptide mimics, providing an efficient approach for constructing intelligent platforms for drug delivery, disease therapy, and diagnostic applications.

Glycopeptide-Based Supramolecular Hydrogels Induce Differentiation of Adipose Stem Cells into Neural Lineages

We applied a bottom-up approach to develop biofunctional supramolecular hydrogels from an aromatic glycodipeptide. The self-assembly of the glycopeptide was induced by either temperature manipulation (heating-cooling cycle) or solvent (DMSO to water) switch. The sol-gel transition was salt-triggered in cell culture media and resulted in gels with the same chemical compositions but different mechanical properties. Human adipose derived stem cells (hASCs) cultured on these gels under basal conditions (i.e., without differentiation factors) overexpressed neural markers, such as GFAP, Nestin, MAP2, and βIII-tubulin, confirming the differentiation into neural lineages. The mechanical properties of the gels influenced the number and distribution of the adhered cells. A comparison with gels obtained from the nonglycosylated peptide showed that glycosylation is crucial for the biofunctionality of the hydrogels by capturing and preserving essential growth factors, e.g., FGF-2.

Para-Methoxybenzylidene Acetal-Protected D-Glucosamine Derivatives as pH-Responsive Gelators and Their Applications for Drug Delivery

Carbohydrate-based low molecular weight gelators (LMWGs) are compounds with the capability to self-assemble into complex molecular networks within a solvent, leading to solvent immobilization. This process of gel formation depends on noncovalent interactions, including Van der Waals, hydrogen bonding, and π-π stacking. Due to their potential applications in environmental remediation, drug delivery, and tissue engineering, these molecules have emerged as an important area of research. In particular, various 4,6-O-benzylidene acetal-protected D-glucosamine derivatives have shown promising gelation abilities. In this study, a series of C-2-carbamate derivatives containing a para-methoxy benzylidene acetal functional group were synthesized and characterized. These compounds exhibited good gelation properties in several organic solvents and aqueous mixtures. Upon removal of the acetal functional group under acidic conditions, a number of deprotected free sugar derivatives were also synthesized. Analysis of these free sugar derivatives revealed two compounds were hydrogelators while their precursors did not form hydrogels. For those protected carbamates that are hydrogelators, removal of the 4,6-protection will result in a more water-soluble compound that produces a transition from gel to solution. Given the ability of these compounds to form gels from solution or solution from gels in situ in response to acidic environments, these compounds may have practical applications as stimuli-responsive gelators in an aqueous medium. In turn, one hydrogelator was studied for the encapsulation and release of naproxen and chloroquine. The hydrogel exhibited sustained drug release over a period of several days, with the release of chloroquine being faster at lower pH due to the acid lability of the gelator molecule. The synthesis, characterization, gelation properties, and studies on drug diffusion are discussed.

Emergence of Cooperative Glucose-Binding Networks in Adaptive Peptide Systems

Minimalistic peptide-based systems that bind sugars in water are challenging to design due to the weakness of interactions and required cooperative contributions from specific amino-acid side chains. Here, we used a bottom-up approach to create peptide-based adaptive glucose-binding networks by mixing glucose with selected sets of input dipeptides (up to 4) in the presence of an amidase to enable in situ reversible peptide elongation, forming mixtures of up to 16 dynamically interacting tetrapeptides. The choice of input dipeptides was based on amino-acid abundance in glucose-binding sites found in the protein data bank, with side chains that can support hydrogen bonding and CH-π interactions. Tetrapeptide sequence amplification patterns, determined through LC-MS analysis, served as a readout for collective interactions and led to the identification of optimized binding networks. Systematic variation of dipeptide input revealed the emergence of two networks of non-covalent hydrogen bonding and CH-π interactions that can co-exist, are cooperative and context-dependent. A cooperative binding mode was determined by studying the binding of the most amplified tetrapeptide (AWAD) with glucose in isolation. Overall, these results demonstrate that the bottom-up design of complex systems can recreate emergent behaviors driven by covalent and non-covalent self-organization that are not observed in reductionist designs and lead to the identification of system-level cooperative binding motifs.

Switching the Mode of Drug Release from a Reaction-Coupled Low-Molecular-Weight Gelator System by Altering Its Reaction Pathway

Low-molecular-weight hydrogels are attractive scaffolds for drug delivery applications because of their modular and facile preparation starting from inexpensive molecular components. The molecular design of the hydrogelator results in a commitment to a particular release strategy, where either noncovalent or covalent bonding of the drug molecule dictates its rate and mechanism. Herein, we demonstrate an alternative approach using a reaction-coupled gelator to tune drug release in a facile and user-defined manner by altering the reaction pathway of the low-molecular-weight gelator (LMWG) and drug components through an acylhydrazone-bond-forming reaction. We show that an off-the-shelf drug with a reactive handle, doxorubicin, can be covalently bound to the gelator through its ketone moiety when the addition of the aldehyde component is delayed from 0 to 24 h, or noncovalently bound with its addition at 0 h. We also examine the use of an l-histidine methyl ester catalyst to prepare the drug-loaded hydrogels under physiological conditions. Fitting of the drug release profiles with the Korsmeyer-Peppas model corroborates a switch in the mode of release consistent with the reaction pathway taken: increased covalent ligation drives a transition from a Fickian to a semi-Fickian mode in the second stage of release with a decreased rate. Sustained release of doxorubicin from the reaction-coupled hydrogel is further confirmed in an MTT toxicity assay with MCF-7 breast cancer cells. We demonstrate the modularity and ease of the reaction-coupled approach to prepare drug-loaded self-assembled hydrogels in situ with tunable mechanics and drug release profiles that may find eventual applications in macroscale drug delivery.

Modular Platform of Carbohydrates-modified Supramolecular Polymers Based on Dendritic Peptide Scaffolds

Glycopeptide supramolecular polymers displaying multivalent carbohydrates are particularly suitable for immune-relevant biomaterials, due to the important functions of carbohydrates in mediating cell-cell communication and modulating immune responses. However, the diversity and complexity of carbohydrates limited the generation of glycopeptide supramolecular monomers. Thereby, a modular platform of presenting various carbohydrates, especially more complex oligosaccharides, is highly desirable but remains underexplored. Here, we first prepared the linear amphiphilic glycopeptides that self-assembled into spherical nanoparticles and worm-like nanoparticles. Furthermore, the dendritic glycopeptides that self-assembled into uniform nanorods were designed to generate modular supramolecular polymers with variable functionality, via redesigning the molecular backbone. With various functional oligosaccharide-modified supramolecular polymers, the in vitro studies further indicated that these polymers were not cytotoxic to macrophages, and significantly modulated the production of proinflammatory cytokines. These findings provide a promising platform to develop supramolecular glycopeptide biomaterials with potential applications in immunomodulation and immunotherapy.

A "Nonsolvent Quenching" Strategy for 3D Printing of Polysaccharide Scaffolds with Immunoregulatory Accuracy

3D printing enables the customized design of implant structures for accurately regulating host responses. However, polysaccharides, as a major biomaterial category with versatile immune activities, are typically "non-printable" due to the collapse of their filaments extruded during printing. This challenge renders their potential as immunomodulatory scaffolds underexploited. Here, inspired by the quench hardening in metal processing, a nonsolvent quenching (NSQ) strategy is innovatively designed for the 3D printing of polysaccharides. Through rapid solvent exchanging, NSQ instantly induces surface hardening to strengthen the polysaccharide filaments upon extrusion, requiring neither chemical modification nor physical blending that alters the material properties. Tested with five polysaccharides with varying physicochemical properties, NSQ prints predesigned structures at organ-relevant scales and a long shelf-life over 3 months. Glucomannan scaffolds, fabricated via NSQ with different grid spacings (1.5 and 2.5 cm), induce distinct host responses upon murine subcutaneous implantation-from specific carbohydrate receptor activation to differential immunocytes accumulation and tissue matrix remodeling-as mechanistically validated in wild-type and Tlr2-/- knockout mice. Overall, NSQ as a facile and generic strategy is demonstrated to fabricate polysaccharide scaffolds with improved shape fidelity, thereby potentially unmasking their accurate immunomodulatory activities for future biomaterials design.

Efficacy of molecular and nano-therapies on brain tumor models in microfluidic devices

The three-dimensional (3D) organization of cells affects their mobility, proliferation, and overall response to treatment. Spheroids, organoids, and microfluidic chips are used in cancer research to reproduce in vitro the complex and dynamic malignant microenvironment. Herein, single- and double-channel microfluidic devices are used to mimic the spatial organization of brain tumors and investigate the therapeutic efficacy of molecular and nano anti-cancer agents. Human glioblastoma multiforme (U87-MG) cells were cultured into a Matrigel matrix embedded within the microfluidic devices and exposed to different doses of free docetaxel (DTXL), docetaxel-loaded spherical polymeric nanoparticles (DTXL-SPN), and the aromatic N-glucoside N-(fluorenylmethoxycarbonyl)-glucosamine-6-phosphate (Fmoc-Glc6P). We observed that in the single-channel microfluidic device, brain tumor cells are more susceptible to DTXL treatment as compared to conventional cell monolayers (50-fold lower IC₅₀ values). In the double-channel device, the cytotoxicity of free DTXL and DTXL-SPN is comparable, but significantly lowered as compared to the single-channel configuration. Finally, the administration of 500 μM Fmoc-Glc6P in the double-channel microfluidic device shows a 50 % U87-MG cell survival after only 24 h, and no deleterious effect on human astrocytes over 72 h. Concluding, the proposed microfluidic chips can be used to reproduce the 3D complex spatial arrangement of solid tumors and to assess the anti-cancer efficacy of therapeutic compounds administrated in situ or systemically.

Polyisobutylene-based glycopolymers as potent inhibitors for in vitro insulin aggregation

A family of amphiphilic diblock copolymers containing a hydrophobic polyisobutylene (PIB, M_n = 1000 g mol^-1) segment and a hydrophilic block with sugar pendants has been synthesized by combining living cationic and reversible addition-fragmentation chain transfer (RAFT) polymerization techniques; to explore their potential in insulin fibrillation inhibition. The glucose content in the hydrophilic segment has been tailor-made from 20 to 57 units to prepare block copolymers. The removal of the acetates from the pendent glucose units resulted in amphiphilic block copolymers that generated micellar aggregates in aqueous media. The treatment of insulin with these block copolymers affected the fibril formation process which was demonstrated using an array of biophysical techniques, namely, thioflavin T (ThT) fluorescence, tyrosine (Tyr) fluorescence, Nile red (NR) fluorescence, isothermal titration calorimetry (ITC), etc. The Tyr fluorescence assay and NR fluorescence study revealed the crucial role of hydrophobic interaction in the inhibition process, whereas ITC measurements confirmed the importance of polar interaction. Thus, the block copolymers exhibit potent inhibition of insulin fibrillation owing to hydrophobic (from PIB segment) and glycosidic cluster effect (from sugar pendant block).

Precise Assembly of Proteins and Carbohydrates for Next-Generation Biomaterials

The complexity and diversity of biomacromolecules make them a unique class of building blocks for generating precise assemblies. They are particularly available to a new generation of biomaterials integrated with living systems due to their intrinsic properties such as accurate recognition, self-organization, and adaptability. Therefore, many excellent approaches have been developed, leading to a variety of quite practical outcomes. Here, we review recent advances in the fabrication and application of artificially precise assemblies by employing proteins and carbohydrates as building blocks, followed by our perspectives on some of new challenges, goals, and opportunities for the future research directions in this field.

Layered supramolecular hydrogels from thioglycosides

Low molecular weight hydrogels are made of small molecules that aggregate via noncovalent interactions. Here, comprehensive characterization of the physical and chemical properties of hydrogels made from thioglycolipids of the disaccharides lactose and cellobiose with simple alkyl chains is reported. While thiolactoside hydrogels are robust, thiocellobioside gels are metastable, precipitating over time into fibrous crystals that can be entangled to create pseudo-hydrogels. Rheology confirms the viscoelastic solid nature of these hydrogels with storage moduli ranging from 10-600 kPa. Additionally, thiolactoside hydrogels are thixotropic which is a desirable property for many potential applications. Freeze-fracture electron microscopy of xerogels shows layers of stacked sheets that are entangled into networks. These structures are unique compared to the fibers or ribbons typically reported for hydrogels. Differential scanning calorimetry provides gel-to-liquid phase transition temperatures ranging from 30 to 80 °C. Prodan fluorescence spectroscopy allows assignment of phase transitions in the gels and other lyotropic phases of high concentration samples. Phase diagrams are estimated for all hydrogels at 1-10 wt% from 5 to ≥ 80 °C. These hydrogels represent a series of interesting materials with unique properties that make them attractive for numerous potential applications.

A generic self-assembly approach towards phototheranostics for NIR-II fluorescence imaging and phototherapy

Controllable self-assembly of photonic molecules for precise biomedicine is highly desirable but challenging to prepare multifunctional nano-phototheranostics. Herein, we developed a generic self-assembly approach to design nano-phototheranostics that provides NIR-II fluorescence imaging and phototherapy. We first designed and synthesized two amphiphilic photonic molecules, PEG₂₀₀₀-IR806 and BODIPY. Then, we prepared the co-self-assembled phototheranostic agents, PEG₂₀₀₀-IR806/BODIPY nanoparticles (PIBY NPs). The morphology of the PIBY NPs is controllable by adjusting the ratio of PEG₂₀₀₀-IR806 and BODIPY during self-assembly. The NIR-II fluorescence properties and phototherapy capability of the PIBY NPs were demonstrated in vitro and in vivo. By tuning the ratio of PEG₂₀₀₀-IR806 and BODIPY, the PIBY NPs showed various morphologies (e.g. spherical nanoparticles, nanovesicles and rod-like nanoparticles). The PEG₂₀₀₀-IR806 plays two roles in the co-self-assemblies, one is second near-infrared (NIR-II, 1000-1700 nm) agent, the other is the surfactant for BODIPY encapsulation. The phototherapeutic PIBY NPs all show bright NIR-II fluorescence and effective phototherapeutic (photothermal and photodynamic) properties, which are attributed to IR806 and BODIPY, respectively. The driving force of the self-assembly can be attributed to the electrostatic interaction between NIR806 and BODIPY and their hydrophobicity. The rod-like PIBY NPs (rPIBY NPs) demonstrated a low half inhibitory concentration (IC₅₀) of 3.96 µg/mL on U87MG cells. The NIR-II imaging showed the accumulation of rPIBY NPs in the tumor region. After systemic injection of rPIBY NPs at low dose (0.5 mg/kg), the tumor growth was greatly inhibited upon laser irradiation without noticeable side effects. This study provides a generic self-assembly approach to fabricate NIR-II imaging and phototherapeutic platform for cancer phototheranostics. STATEMENT OF SIGNIFICANCE: Nanophototheranostics providing NIR-II fluorescence imaging and phototherapy are expected to play a critical role in modern precision medicine. Controllable self-assembly of optical molecules for the fabrication of efficient nanophototheranostics is highly desirable but challenging. This work reports for the first time the co-assembly of a NIR-II imaging contrast agent and a phototherapeutic agent to yield nanophototheranostics with various morphologies. The design of molecular co-assembly with complementary optical functions can be a generic method for future the development of phototheranostics.

Enzymatic noncovalent synthesis of peptide assemblies generates multimolecular crowding in cells for biomedical applications

Enzymatic noncovalent synthesis enables the spatiotemporal control of multimolecular crowding in cells, thus offering a unique opportunity for modulating cellular functions. This article introduces some representative enzymes and molecular building blocks for generating peptide assemblies as multimolecular crowding in cells, highlights the relevant biomedical applications, such as anticancer therapy, molecular imaging, trafficking proteins, genetic engineering, artificial intracellular filaments, cell morphogenesis, and antibacterial, and briefly discusses the promises of ENS as a multistep molecular process in biology and medicine.

Expanding the Conformational Landscape of Minimalistic Tripeptides by Their O-Glycosylation

We report on the supramolecular self-assembly of tripeptides and their O-glycosylated analogues, in which the carbohydrate moiety is coupled to a central serine or threonine flanked by phenylalanine residues. The substitution of serine with threonine introduces differential side-chain interactions, which results in the formation of aggregates with different morphology. O-glycosylation decreases the aggregation propensity because of rebalancing of the π interactions. The glycopeptides form aggregates with reduced stiffness but increased thermal stability. Our results demonstrate that the designed minimalistic glycopeptides retain critical functional features of glycoproteins and therefore are promising tools for elucidation of molecular mechanisms involved in the glycoprotein interactome. They can also serve as an inspiration for the design of functional glycopeptide-based biomaterials.

Biofunctionality with a twist: the importance of molecular organisation, handedness and configuration in synthetic biomaterial design

The building blocks of life - nucleotides, amino acids and saccharides - give rise to a large variety of components and make up the hierarchical structures found in Nature. Driven by chirality and non-covalent interactions, helical and highly organised structures are formed and the way in which they fold correlates with specific recognition and hence function. A great amount of effort is being put into mimicking these highly specialised biosystems as biomaterials for biomedical applications, ranging from drug discovery to regenerative medicine. However, as well as lacking the complexity found in Nature, their bio-activity is sometimes low and hierarchical ordering is missing or underdeveloped. Moreover, small differences in folding in natural biomolecules (e.g., caused by mutations) can have a catastrophic effect on the function they perform. In order to develop biomaterials that are more efficient in interacting with biomolecules, such as proteins, DNA and cells, we speculate that incorporating order and handedness into biomaterial design is necessary. In this review, we first focus on order and handedness found in Nature in peptides, nucleotides and saccharides, followed by selected examples of synthetic biomimetic systems based on these components that aim to capture some aspects of these ordered features. Computational simulations are very helpful in predicting atomic orientation and molecular organisation, and can provide invaluable information on how to further improve on biomaterial designs. In the last part of the review, a critical perspective is provided along with considerations that can be implemented in next-generation biomaterial designs.