Breaking the trade-off between selectivity and adsorption capacity for gas separation

Metal-Organic Framework with Space-Partition Pores by Fluorinated Anions for Benchmark C2H2/CO2 Separation

The efficient separation of C2H2 from C2H2/CO2 or C2H2/CO2/CH4 mixtures is crucial for achieving high-purity C2H2 (>99%), essential in producing contemporary commodity chemicals. In this report, we present ZNU-12, a metal-organic framework with space-partitioned pores formed by inorganic fluorinated anions, for highly efficient C2H2/CO2 and C2H2/CO2/CH4 separation. The framework, partitioned by fluorinated SiF62- anions into three distinct cages, enables both a high C2H2 capacity (176.5 cm3/g at 298 K and 1.0 bar) and outstanding C2H2 selectivity over CO2 (13.4) and CH4 (233.5) simultaneously. Notably, we achieve a record-high C2H2 productivity (132.7, 105.9, 98.8, and 80.0 L/kg with 99.5% purity) from C2H2/CO2 (v/v = 50/50) and C2H2/CO2/CH4 (v/v = 1/1/1, 1/1/2, or 1/1/8) mixtures through a cycle of adsorption-desorption breakthrough experiments with high recovery rates. Theoretical calculations suggest the presence of potent "2 + 2" collaborative hydrogen bonds between C2H2 and two hexafluorosilicate (SiF62-) anions in the confined cavities.

Gate-opening Induced by C8 Aromatics in a Double Diamondoid Coordination Network

Coordination networks (CNs) that undergo guest-induced structural transformations are of topical interest thanks to their potential utility in separations and storage applications. Herein, we report a double diamondoid (ddi) topology CN, [Ni2(bimpz)2(bdc)2(H2O)] n or X-ddi-2-Ni (H2bdc = 1,4-benzenedicarboxylic acid, bimpz = 3,6-bis(imidazol-1-yl)pyridazine), that undergoes structural transformations induced by C8 isomers, i.e., xylenes (o-xylene, OX; m-xylene, MX; p-xylene, PX) and ethylbenzene (EB). X-ddi-2-Ni was characterized by single-crystal to single-crystal transformations from a nonporous phase, X-ddi-2-Ni-β, to isostructural C8-loaded phases, namely X-ddi-2-Ni-OX, X-ddi-2-Ni-MX, X-ddi-2-Ni-PX and X-ddi-2-Ni-EB. X-ddi-2-Ni accommodates two C8 isomers per Ni unit, resulting in relatively high uptake (ca. 50 wt %), but with low selectivity toward C8 isomers as found using nuclear magnetic resonance (NMR) and gas chromatography (GC). In addition, a narrow range of gate-opening pressures for each isomer was determined from dynamic vapor sorption, consistent with the nonadaptable nature of the C8-loaded phase determined crystallographically, also supported by modeling.

Integrating Multiscale Simulation with Machine Learning to Screen and Design FIL@COFs for Ethane-Selective Separation

Efficient and economical separation of C2H6/C2H4 is an imperative and extremely challenging process in the petrochemical industry. The C2H6-selective adsorbents with high working capacity and high selectivity are highly desirable from a practical application standpoint. In this study, we constructed a database of fluorinated ionic liquid@covalent organic frameworks (FIL@COFs) and screened out the high-performing FIL@COFs for C2H6-selective separation. Utilizing the optimal machine learning (ML) algorithm (XGBoost) and hyperparameters, we further revealed the key factors influencing the separation performance. The multiscale simulation not only validated the prediction accuracy of ML but also demonstrated that adjusting the largest cavity diameter of COFs with FILs could yield FIL@COFs with high performance for C2H6-selective separation. Our work provides essential guidance for designing new FIL@COF adsorbents for value-added gas purification.

Reverse Separation of Carbon Dioxide and Acetylene in Two Isostructural Copper Pyridine-Carboxylate Frameworks

Separating acetylene from carbon dioxide is important but highly challenging due to their similar molecular shapes and physical properties. Adsorptive separation of carbon dioxide from acetylene can directly produce pure acetylene but is hardly realized because of relatively polarizable acetylene binds more strongly. Here, we reverse the CO2 and C2H2 separation by adjusting the pore structures in two isoreticular ultramicroporous metal-organic frameworks (MOFs). Under ambient conditions, copper isonicotinate (Cu(ina)2), with relatively large pore channels shows C2H2-selective adsorption with a C2H2/CO2 selectivity of 3.4, whereas its smaller-pore analogue, copper quinoline-5-carboxylate (Cu(Qc)2) shows an inverse CO2/C2H2 selectivity of 5.6. Cu(Qc)2 shows compact pore space that well matches the optimal orientation of CO2 but is not compatible for C2H2. Neutron powder diffraction experiments confirmed that CO2 molecules adopt preferential orientation along the pore channels during adsorption binding, whereas C2H2 molecules bind in an opposite fashion with distorted configurations due to their opposite quadrupole moments. Dynamic breakthrough experiments have validated the separation performance of Cu(Qc)2 for CO2/C2H2 separation.

Isoreticular Contraction of Cage-like Metal-Organic Frameworks with Optimized Pore Space for Enhanced C2H2/CO2 and C2H2/C2H4 Separations

The C2H2 separation from CO2 and C2H4 is of great importance yet highly challenging in the petrochemical industry, owing to their similar physical and chemical properties. Herein, the pore nanospace engineering of cage-like mixed-ligand MFOF-1 has been accomplished via contracting the size of the pyridine- and carboxylic acid-functionalized linkers and introducing a fluoride- and sulfate-bridging cobalt cluster, based on a reticular chemistry strategy. Compared with the prototypical MFOF-1, the constructed FJUT-1 with the same topology presents significantly improved C2H2 adsorption capacity, and selective C2H2 separation performance due to the reduced cage cavity size, functionalized pore surface, and appropriate pore volume. The introduction of fluoride- and sulfate-bridging cubane-type tetranuclear cobalt clusters bestows FJUT-1 with exceptional chemical stability under harsh conditions while providing multiple potential C2H2 binding sites, thus rendering the adequate ability for practical C2H2 separation application as confirmed by the dynamic breakthrough experiments under dry and humid conditions. Additionally, the distinct binding mechanism is suggested by theoretical calculations in which the multiple supramolecular interactions involving C-H···O, C-H···F, and other van der Waals forces play a critical role in the selective C2H2 separation.

Crystal Engineering of a New Hexafluorogermanate Pillared Hybrid Ultramicroporous Material Delivers Enhanced Acetylene Selectivity

Hybrid ultramicroporous materials (HUMs), metal-organic platforms that incorporate inorganic pillars, are a promising class of porous solids. A key area of interest for such materials is gas separation, where HUMs have already established benchmark performances. Thanks to their ready compositional modularity, we report the design and synthesis of a new HUM, GEFSIX-21-Cu, incorporating the ligand pypz (4-(3,5-dimethyl-1H-pyrazol-4-yl)pyridine, 21) and GeF62- pillaring anions. GEFSIX-21-Cu delivers on two fronts: first, it displays an exceptionally high C2H2 adsorption capacity (≥5 mmol g-1) which is paired with low uptake of CO2 (<2 mmol g-1), and, second, a low enthalpy of adsorption for C2H2 (ca. 32 kJ mol-1). This combination is rarely seen in the C2H2 selective physisorbents reported thus far, and not observed in related isostructural HUMs featuring pypz and other pillaring anions. Dynamic column breakthrough experiments for 1:1 and 2:1 C2H2/CO2 mixtures revealed GEFSIX-21-Cu to selectively separate C2H2 from CO2, yielding ≥99.99% CO2 effluent purities. Temperature-programmed desorption experiments revealed full sorbent regeneration in <35 min at 60 °C, reinforcing HUMs as potentially technologically relevant materials for strategic gas separations.

Construction of Negative Electrostatic Pore Environments in a Scalable, Stable and Low-Cost Metal-organic Framework for One-Step Ethylene Purification from Ternary Mixtures

One-step separation of C2 H4 from ternary C2 mixtures by physisorbents remains a challenge to combine excellent separation performance with high stability, low cost, and easy scalability for industrial applications. Herein, we report a strategy of constructing negative electrostatic pore environments in a stable, low-cost, and easily scaled-up aluminum MOF (MOF-303) for efficient one-step C2 H2 /C2 H6 /C2 H4 separation. This material exhibits not only record high C2 H2 and C2 H6 uptakes, but also top-tier C2 H2 /C2 H4 and C2 H6 /C2 H4 selectivities at ambient conditions. Theoretical calculations combined with in situ infrared spectroscopy indicate that multiple N/O sites on pore channels can build a negative electro-environment to provide stronger interactions with C2 H2 and C2 H6 over C2 H4 . Breakthrough experiments confirm its exceptional separation performance for ternary mixtures, affording one of the highest C2 H4 productivity of 1.35 mmol g-1 . This material is highly stable and can be easily synthesized at kilogram-scale from cheap raw materials using a water-based green synthesis. The benchmark combination of excellent separation properties with high stability and low cost in scalable MOF-303 has unlocked its great potential in this challenging industrial separation.

Interlayer Symmetry Control in Flexible-Robust Layered Metal-Organic Frameworks for Highly Efficient C2H2/CO2 Separation

Removal of the CO2 impurities from C2H2/CO2 mixtures is an essential process to produce high-purity C2H2. Fabricating an adsorbent capable of discriminating these species, which have close kinetic diameters, is critical for developing advanced adsorption processes. Herein, we demonstrate a strategy to exploit the tunability of interlayer and intralayer spaces of two-dimensional (2D) layered metal-organic frameworks to achieve high performance for C2H2/CO2 separation. This indicates that interlayer symmetrical control can achieve more efficient packing of C2H2 into Ni(4-DPDS)2CrO4, with a high C2H2 capacity of 45.7 cm3·g-1 at 0.01 bar and a selectivity of 67.7 (298 K, 1 bar), which strikes a good balance between working capacity and separation selectivity compared to other isostructural Ni(4-DPDS)2MO4 (M = Mo, W). Crystallographic studies and DFT-D calculations reveal that such a C2H2-selective adsorbent possesses strong binding interactions due to the tailored pore confinement provided by the angular anions and rich electronic environment. Experimental breakthrough results comprehensively demonstrate the efficient C2H2/CO2 separation performance of this unique material.

Inverse CO2/C2H2 separation assisted by coordinated water in a dysprosium(III) metal-organic framework

An ultramicroporous metal-organic framework (MOF) constructed from dysprosium(III) and oxalate, termed Dy-F-oxa, is carefully studied for inverse separation of CO2 from C2H2. Adsorption experiments and modeling studies reveal that the high CO2 adsorption is attributed to the preferential sites for CO2 by coordinated water. After the equimolar gas mixture breakthrough experiment, C2H2 can be directly produced as a pure effluent.

Advancing CH4/H2 separation with covalent organic frameworks by combining molecular simulations and machine learning

A high-throughput computational screening approach combined with machine learning (ML) was introduced to unlock the potential of both synthesized and hypothetical COFs (hypoCOFs) for adsorption-based CH₄/H₂ separation. We studied 597 synthesized COFs for adsorption of a CH₄/H₂ mixture using Grand Canonical Monte Carlo (GCMC) simulations under pressure-swing adsorption (PSA) and vacuum-swing adsorption (VSA) conditions. Based on the simulation results, the CH₄/H₂ selectivities, CH₄ working capacities, adsorbent performance scores, and regenerabilities of the synthesized COFs were assessed and the structural properties of the top-performing COFs were identified. The hypoCOF database composed of 69 840 materials was then filtered to identify 7737 hypothetical materials having similar structural properties to the top synthesized COFs. These hypothetical COFs were then examined for CH₄/H₂ separation using molecular simulations and the results showed that the top hypoCOFs have CH₄ selectivities and working capacities in the ranges of 21.9-28.7 (64.7-128.6) and 5.8-7.6 (1.3-3.1) mol kg^-1 under PSA (VSA) conditions, respectively, outperforming the synthesized COFs and metal-organic frameworks (MOFs). ML models were then developed based on the hypoCOF simulation results to accurately predict the CH₄/H₂ mixture adsorption properties of all remaining hypothetical materials when their structural and chemical properties are fed into the models. These models accurately assessed the CH₄/H₂ mixture separation performances of any hypoCOF within seconds without performing computationally demanding molecular simulations. The computational approach that we have proposed in this study will provide an accurate and efficient assessment of COF materials for CH₄/H₂ separation and significantly accelerate the experimental efforts towards the design and discovery of new high-performing COF adsorbents.

Vertex Strategy in Layered 2D MOFs: Simultaneous Improvement of Thermodynamics and Kinetics for Record C2H2/CO2 Separation Performance

Developing adsorbents with multiple merits in capacity, selectivity, mass transfer, and stability toward C₂H₂/CO₂ separation is crucial and challenging for producing high-purity C₂H₂ for advanced polymers and the electronic industry. Here, we demonstrate a vertex strategy to create adsorbents combining these merits through rationally designing the vertex groups of a wavy-shaped framework in layered 2D metal-organic frameworks (MOFs) to finely regulate the local conformation and stacking interactions, which creates the optimal inter- and intralayer space to realize simultaneous improvement of adsorption thermodynamics and kinetics. Two new hydrolytically stable MOFs, ZUL-330 and ZUL-430, were prepared, and diverse experiments and modeling on both adsorption equilibrium and diffusion were performed. Record separation selectivities coupled with extraordinary dynamic C₂H₂ capacities were achieved for C₂H₂/CO₂ mixtures with different proportions (50/50 or 10/5, v/v), along with a small diffusion barrier and fast mass transfer. Consequently, polymer-grade (99.9%) and electronic-grade (99.99%) C₂H₂ were obtained with excellent productivities of up to ∼6 mmol cm^-3.

Stepwise Engineering the Pore Aperture of a Cage-like MOF for the Efficient Separation of Isomeric C4 Paraffins under Humid Conditions

The separation of isomeric C4 paraffins is an important task in the petrochemical industry, while current adsorbents undergo a trade-off relationship between selectivity and adsorption capacity. In this work, the pore aperture of a cage-like Zn-bzc (bzc=pyrazole-4-carboxylic acid) is tuned by the stepwise installation methyl groups on its narrow aperture to achieve both molecular-sieving separation and high n-C₄ H₁₀ uptake. Notably, the resulting Zn-bzc-2CH₃ (bzc-2CH₃ =3,5-dimethylpyrazole-4-carboxylic acid) can sensitively capture n-C₄ H₁₀ and exclude iso-C₄ H₁₀ , affording molecular-sieving for n-C₄ H₁₀ /iso-C₄ H₁₀ separation and high n-C₄ H₁₀ adsorption capacity (54.3 cm³  g^-1 ). Breakthrough tests prove n-C₄ H₁₀ /iso-C₄ H₁₀ can be efficiently separated and high-purity iso-C₄ H₁₀ (99.99 %) can be collected. Importantly, the hydrophobic microenvironment created by the introduced methyl groups greatly improves the stability of Zn-bzc and significantly eliminates the negative effect of water vapor on gas separation under humid conditions, indicating Zn-bzc-2CH₃ is a new benchmark adsorbent for n-C₄ H₁₀ /iso-C₄ H₁₀ separation.

Highly Selective Separation of C2H2/CO2 and C2H2/C2H4 in an N-Rich Cage-Based Microporous Metal-Organic Framework

The separation of acetylene (C2H2) from carbon dioxide (CO2) and the purification of ethylene (C2H4) from C2H2 are quite essential processes for the chemical industry. However, these processes are challenging due to their similar physical properties, including molecule sizes and boiling points. Herein, we report an N-rich cage-based microporous metal-organic framework (MOF), [Cd5(Tz)9](NO3) (termed as Cd-TZ, TZ stands for tetrazole), and its highly efficient separation of C2H2/CO2 and C2H2/C2H4. Single-component gas adsorption isotherms reveal that Cd-TZ exhibits high C2H2 adsorption capacity (3.10 mmol g-1 at 298 K and 1 bar). The N-rich cages in Cd-TZ can trap C2H2 with a higher isosteric heat of adsorption (40.8 kJ mol-1) than CO2 and C2H4 owing to the robust host-guest interactions between the noncoordinated N atoms and C2H2, which has been verified by molecular modeling studies. Cd-TZ shows a high IAST selectivity for C2H2/CO2 (8.3) and C2H2/C2H4 (13.3). The breakthrough simulations confirm the potential for separating C2H2/CO2 and the purification of C2H4 from C2H2.

Concurrent Enhancement of Acetylene Uptake Capacity and Selectivity by Progressive Core Expansion and Extra-Framework Anions in Pore-Space-Partitioned Metal-Organic Frameworks

A multi-stage core-expansion method is proposed here as one component of the integrative binding-site/extender/core-expansion (BEC) strategy. The conceptual deconstruction of the partitioning ligand into three editable parts draws our focus onto progressive core expansion and allows the optimization of both acetylene uptake and selectivity. The effectiveness of this strategy is shown through a family of eight cationic pore-partitioned materials containing three different partitioning ligands and various counter anions. The optimized structure, Co₃ -cpt-tph-Cl (Hcpt=4-(p-carboxyphenyl)-1,2,4-triazole, H-tph=(2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene) with the largest surface area and highest C₂ H₂ uptake capacity (200 cm³ /g at 298 K), also exhibits (desirably) the lowest CO₂ uptake and hence the highest C₂ H₂ /CO₂ selectivity. The successful boost in both C₂ H₂ capacity and IAST selectivity allows Co₃ -cpt-tph-Cl to rank among the best crystalline porous materials, ionic MOFs in particular, for C₂ H₂ uptake and C₂ H₂ /CO₂ experimental breakthrough separation.

Strengthening Intraframework Interaction within Flexible MOFs Demonstrates Simultaneous Sieving Acetylene from Ethylene and Carbon Dioxide

Efficient separation of acetylene (C₂ H₂ )/ethylene (C₂ H₄ ) and acetylene/carbon dioxide (CO₂ ) by adsorption is an industrially promising process, but adsorbents capable of simultaneously capturing trace acetylene from ethylene and carbon dioxide are scarce. Herein, a gate-opening effect on three isomorphous flexible metal-organic frameworks (MOFs) named Co(4-DPDS)₂ MO₄ (M = Cr, Mo, W; 4-DPDS = 4,4-dipyridyldisulfide) is modulated by anion pillars substitution. The shortest CrO₄ ^2- strengthens intraframework hydrogen bonding and thus blocks structural transformation after activation, striking a good balance among working capacity, separation selectivity, and trace impurity removal of flexible MOFs out of nearly C₂ H₂ /C₂ H₄ and C₂ H₂ /CO₂ molecular sieving. The exceptional separation performance of Co(4-DPDS)₂ CrO₄ is confirmed by dynamic breakthrough experiments. It reveals the specific threshold pressures control in anion-pillared flexible materials enabled elimination of the impurity leakage to realize high purity products through precise control of the intraframework interaction. The adsorption mechanism and multimode structural transformation property are revealed by both calculations and crystallography studies. This work demonstrates the feasibility of modulating flexibility for controlling gate-opening effect, especially for some cases of significant aperture shrinkage after activation.

Study of the Counter Cation Effects on the Supramolecular Structure and Electronic Properties of a Dianionic Oxamate-Based {NiII2} Helicate

Herein, we describe the synthesis, crystal structure, and electronic properties of {[K₂(dmso)(H₂O)₅][Ni₂(H₂mpba)₃]·dmso·2H₂O}_n (1) and [Ni(H₂O)₆][Ni₂(H₂mpba)₃]·3CH₃OH·4H₂O (2) [dmso = dimethyl sulfoxide; CH₃OH = methanol; and H₄mpba = 1,3-phenylenebis(oxamic acid)] bearing the [Ni₂(H₂mpba)₃]^2- helicate, hereafter referred to as {Ni^II₂}. SHAPE software calculations indicate that the coordination geometry of all the Ni^II atoms in 1 and 2 is a distorted octahedron (O_h) whereas the coordination environments for K1 and K2 atoms in 1 are Snub disphenoid J84 (D_2d) and distorted octahedron (O_h), respectively. The {Ni^II₂} helicate in 1 is connected by K⁺ counter cations yielding a 2D coordination network with sql topology. In contrast to 1, the electroneutrality of the triple-stranded [Ni₂(H₂mpba)₃] ^2- dinuclear motif in 2 is achieved by a [Ni(H₂O)₆]²⁺ complex cation, where the three neighboring {Ni^II₂} units interact in a supramolecular fashion through four R₂²(10) homosynthons yielding a 2D array. Voltammetric measurements reveal that both compounds are redox active (with the Ni^II/Ni^I pair being mediated by OH^- ions) but with differences in formal potentials that reflect changes in the energy levels of molecular orbitals. The Ni^II ions from the helicate and the counter-ion (complex cation) in 2 can be reversibly reduced, resulting in the highest faradaic current intensities. The redox reactions in 1 also occur in an alkaline medium but at higher formal potentials. The connection of the helicate with the K⁺ counter cation has an impact on the energy levels of the molecular orbitals; this experimental behavior was further supported by X-ray absorption near-edge spectroscopy (XANES) experiments and computational calculations.

Optimizing Acetylene Sorption through Induced-fit Transformations in a Chemically Stable Microporous Framework

Developing practical storage technologies for acetylene (C₂ H₂ ) is important but challenging because C₂ H₂ is useful but explosive. Here, a novel metal-organic framework (MOF) (FJI-H36) with adaptive channels was prepared. It can effectively capture C₂ H₂ (159.9 cm³  cm^-3 ) at 1 atm and 298 K, possessing a record-high storage density (561 g L^-1 ) but a very low adsorption enthalpy (28 kJ mol^-1 ) among all the reported MOFs. Structural analyses show that such excellent adsorption performance comes from the synergism of active sites, flexible framework, and matched pores; where the adsorbed-C₂ H₂ can drive FJI-H36 to undergo induced-fit transformations step by step, including deformation/reconstruction of channels, contraction of pores, and transformation of active sites, finally leading to dense packing of C₂ H₂ . Moreover, FJI-H36 has excellent chemical stability and recyclability, and can be prepared on a large scale, enabling it as a practical adsorbent for C₂ H₂ . This will provide a useful strategy for developing practical and efficient adsorbents for C₂ H₂ storage.

Pore Environment Optimization of Microporous Metal-Organic Frameworks with Huddled Pyrazine Pillars for C2H2/CO2 Separation

Metal-organic frameworks (MOFs) have been proven promising in addressing many critical issues related to gas separation and purification. However, it remains a great challenge to optimize the pore environment of MOFs for purification of specific gas mixtures. Herein, we report the rational construction of three isostructural microporous MOFs with the 4,4',4"-tricarboxyltriphenylamine (H₃TCA) ligand, unusual hexaprismane Ni₆O₆ cluster, and functionalized pyrazine pillars [PYZ-x, x = -H (DZU-10), -NH₂ (DZU-11), and -OH (DZU-12)], where the building blocks of Ni₆O₆ clusters and huddled pyrazine pillars are reported in porous MOFs for the first time. These building blocks have enabled the resulting materials to exhibit good chemical stability and variable pore chemistry, which thus contribute to distinct performances toward C₂H₂/CO₂ separation. Both single-component isotherms and dynamic column breakthrough experiments demonstrate that DZU-11 with the PYZ-NH₂ pillar outperforms its hydrogen and hydroxy analogues. Density functional theory calculations reveal that the higher C₂H₂ affinity of DZU-11 over CO₂ is attributed to multiple electrostatic interactions between C₂H₂ and the framework, including strong C≡C···H-N (2.80 Å) interactions. This work highlights the potential of pore environment optimization to construct smart MOF adsorbents for some challenging gas separations.

Rational regulation of acetylene adsorption and separation for ultra-microporous copper-1,2,4-triazolate frameworks by halogen hydrogen bonds

It is well known that the introduction of exposed fluorine (F) sites into metal-organic frameworks (MOFs) can effectively promote acetylene (C₂H₂) adsorption via C-H⋯F hydrogen bonds. However, such super strong hydrogen bonding interactions usually lead to very high acetylene adsorption enthalpy and thus require more energy during the adsorbent regeneration process. As the same group elements, chlorine (Cl), bromine (Br) and iodine (I) also can act as hydrogen bond acceptors but with relatively weak forces. So, it is speculated that the decoration of Cl, Br or I sites on the pore surface of MOF adsorbents may enhance acetylene adsorption but with lower energy consumption. Herein, ultra-microporous MOFs constructed by Cu₄X₄ (X = Cl, Br, I) motifs and 1,2,4-triazolate linkers, namely, [Cu₈X₄(TRZ)₄]_n (TRZ = 3,5-diethyl-1,2,4-triazole or detrz for SNNU-313-X, and 3,5-dipropyl-1,2,4-triazole or dptrz for SNNU-314-X), provide an ideal platform to investigate the effect of C-H⋯X (X = Cl, Br, I) hydrogen bonding on C₂H₂ adsorption and purification performance. Benefiting from the small pore size and pore environment, the C₂H₂ uptake and separation properties of this series of MOFs are systematically regulated. Detailed gas adsorption results show that with the same organic linker, the C₂H₂ uptake and separation (C₂H₂/C₂H₄ and C₂H₂/CO₂) performance decrease clearly with the electronegativity of halogen ions (SNNU-313-Cl > SNNU-313-Br > SNNU-313-I). With the same halogen ion, the gas adsorption decreases with the bulk of decorated alkyl groups (SNNU-313-Cl > SNNU-314-Cl). Remarkably, SNNU-313/314 series MOF adsorbents exhibit moderate C₂H₂ uptake capacity and high separation ability, but the C₂H₂ adsorption enthalpies are much lower than those of MOF materials with exposed F sites. Dynamic fixed-bed column breakthrough experiments and Grand Canonical Monte Carlo (GCMC) simulations further indicate the critical effects of halogen hydrogen bonds on acetylene adsorption and separation. Overall, this work demonstrated an effective regulation of acetylene adsorption and separation by rational C-H⋯X hydrogen bonding, which may provide a new route for the exploration of energy-efficient acetylene adsorbent materials.

Spatial disposition of square-planar mononuclear nodes in metal-organic frameworks for C2H2/CO2 separation

The efficient separation of acetylene (C2H2) from its mixture with carbon dioxide (CO2) remains a challenging industrial process due to their close molecular sizes/shapes and similar physical properties. Herein, we report a microporous metal-organic framework (JNU-4) with square-planar mononuclear copper(ii) centers as nodes and tetrahedral organic linkers as spacers, allowing for two accessible binding sites per metal center for C2H2 molecules. Consequently, JNU-4 exhibits excellent C2H2 adsorption capacity, particularly at 298 K and 0.5 bar (200 cm3 g-1). Detailed computational studies confirm that C2H2 molecules are indeed predominantly located in close proximity to the square-planar copper centers on both sides. Breakthrough experiments demonstrate that JNU-4 is capable of efficiently separating C2H2 from a 50 : 50 C2H2/CO2 mixture over a broad range of flow rates, affording by far the largest C2H2 capture capacity (160 cm3 g-1) and fuel-grade C2H2 production (105 cm3 g-1, ≥98% purity) upon desorption. Simply by maximizing accessible open metal sites on mononuclear metal centers, this work presents a promising strategy to improve the C2H2 adsorption capacity and address the challenging C2H2/CO2 separation.

Reduction of sulphur dioxide emission into the environment by adsorption on enhanced α-hematite surface

The top priority of the sustainable development goals is to improve the quality of the environment for better living. Sulphur dioxide is considered more hazardous than any other gases that pollute the environment and harm the well-being of organisms. In 2019, India alone accounted for 21% of the world's SO₂ emissions. Strict action is required to reduce maximum levels of SO₂ emission to the atmosphere to improve the total air quality. To reduce SO₂ emissions more effectively, in this study, α-hematite was chemically activated by using 5% NaOH and C₂H₅OH with the help of a double bed adsorption column. The adsorbent properties of α-hematite were studied by Brunauer-Emmett-Teller isotherm, which revealed a high surface area (539 m² g^-1), and pore size (2.3125 nm) and high volume in the pore (0.0293432 cm³ mg^-1). FTIR confirmed that the SO₂ particulate on the surface of the adsorbent with an adsorption capacity of 95%. The operating temperature of 40-50 °C was optimal for the chemical adsorption. It was found that the inlet concentration (64 mg m^-3) of SO₂ decreases as the adsorption of SO₂ increases. Trace SO₂ was well-adsorbed by the adsorbent, which resulted in a mass transfer zone. Freundlich's adsorption spectrum was more fit for low concentrated SO₂ than Langmuir isotherm. The results indicate that the environmental emission of SO₂ can be reduced with chemically enhanced α-hematite.

Fluorinated metal-organic frameworks for gas separation

Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.

Isotope-selective pore opening in a flexible metal-organic framework

Flexible metal-organic frameworks that show reversible guest-induced phase transitions between closed and open pore phases have enormous potential for highly selective, energy-efficient gas separations. Here, we present the gate-opening process of DUT-8(Ni) that selectively responds to D₂, whereas no response is observed for H₂ and HD. In situ neutron diffraction directly reveals this pressure-dependent phase transition. Low-temperature thermal desorption spectroscopy measurements indicate an outstanding D₂-over-H₂ selectivity of 11.6 at 23.3 K, with high D₂ uptake. First-principles calculations coupled with statistical thermodynamics predict the isotope-selective gate opening, rationalized by pronounced nuclear quantum effects. Simulations suggest DUT-8(Ni) to remain closed in the presence of HT, while it also opens for DT and T₂, demonstrating gate opening as a highly effective approach for isotopolog separation.

Identifying the Gate-Opening Mechanism in the Flexible Metal-Organic Framework UTSA-300

Atomic-level understanding of the gate-opening phenomenon in flexible porous materials is an important step toward learning how to control, design, and engineer them for applications such as the separation of gases from complex mixtures. Here, we report such mechanistic insight through an in-depth study of the pressure-induced gate-opening phenomenon in our earlier reported metal-organic framework (MOF) Zn(dps)₂(SiF₆) (dps = 4,4'-dipyridylsulfide), also called UTSA-300, using isotherm and calorimetry measurements, in situ infrared spectroscopy, and ab initio simulations. UTSA-300 is shown to selectively adsorb acetylene (C₂H₂) over ethylene (C₂H₄) and ethane (C₂H₆) and undergoes an abrupt gate-opening phenomenon, making this framework a highly selective gas separator of this complex mixture. The selective adsorption is confirmed by pressure-dependent in situ infrared spectroscopy, which, for the first time, shows the presence of multiple C₂H₂ species with varying strengths of bonding. A rare energetic feature at the gate-opening condition of the flexible MOF is observed in our differential heat energies, directly measured by calorimetry, showcasing the importance of this tool in adsorption property exploration of flexible frameworks and offering an energetic benchmark for further energy-based fundamental studies. Based on the agreement of this feature with ab initio-based adsorption energies of C₂H₂ in the closed-pore structure UTSA-300a ("a" refers to the activated form), this feature is assigned to the weakening of the H-bond C-H···F formed between C₂H₂ and fluorine of the MOF. Our analysis identifies the weakening of this H-bond, the expansion of the closed-pore MOF upon successive C₂H₂ coadsorption until its volume is close to that of the open-pore MOF, and the spontaneous gate opening to energetically favor C₂H₂ adsorption in the open-pore structure as crucial steps in the gate-opening mechanism in this system.

Immobilization of Lewis Basic Sites into a Stable Ethane-Selective MOF Enabling One-Step Separation of Ethylene from a Ternary Mixture

Purification of C₂H₄ from a ternary C₂H₂/C₂H₆/C₂H₄ mixture by one-step adsorption separation is of prime importance but challenging in the petrochemical industry; however, effective strategies to design high-performance adsorbents are lacking. We herein report for the first time the incorporation of Lewis basic sites into a C₂H₆-selective MOF, enabling efficient one-step production of polymer-grade C₂H₄ from ternary mixtures. Introduction of amino groups into highly stable C₂H₆-selective UiO-67 can not only partition large pores into smaller cagelike pockets to provide suitable pore confinement but also offer additional binding sites to simultaneously enhance C₂H₂ and C₂H₆ adsorption capacities over C₂H₄. The amino-functionalized UiO-67-(NH₂)₂ thus exhibits exceptionally high C₂H₂ and C₂H₆ uptakes as well as benchmark C₂H₂/C₂H₄ and C₂H₆/C₂H₄ selectivities, surpassing all of the C₂H₂/C₂H₆-selective materials reported so far. Theoretical calculations combined with in situ infrared spectroscopy indicate that the synergetic effect of suitable pore confinement and functional surfaces decorated with amino groups provides overall stronger multipoint van der Waals interactions with C₂H₂ and C₂H₆ over C₂H₄. The exceptional performance of UiO-67-(NH₂)₂ was evidenced by breakthrough experiments for C₂H₂/C₂H₆/C₂H₄ mixtures under dry and wet conditions, providing a remarkable C₂H₄ productivity of 0.55 mmol g^-1 at ambient conditions.

A new boron cluster anion pillared metal organic framework with ligand inclusion and its selective acetylene capture properties

A novel microporous boron cluster pillared metal–organic framework BSF-10 was synthesized with ligand inclusion for efficient C2H2/CO2 and C2H2/C2H4 adsorption separation.

Fecht's acid revisited: a spirocyclic dicarboxylate for non-aromatic MOFs

The first of a new class of spiroalkane-derived MOF linkers shows aromaticity is not a prerequisite for ligand design in porous materials.

Metal-Organic Framework Based Hydrogen-Bonding Nanotrap for Efficient Acetylene Storage and Separation

The removal of carbon dioxide (CO₂) from acetylene (C₂H₂) is a critical industrial process for manufacturing high-purity C₂H₂. However, it remains challenging to address the tradeoff between adsorption capacity and selectivity, on account of their similar physical properties and molecular sizes. To overcome this difficulty, here we report a novel strategy involving the regulation of a hydrogen-bonding nanotrap on the pore surface to promote the separation of C₂H₂/CO₂ mixtures in three isostructural metal-organic frameworks (MOFs, named MIL-160, CAU-10H, and CAU-23, respectively). Among them, MIL-160, which has abundant hydrogen-bonding acceptors as nanotraps, can selectively capture acetylene molecules and demonstrates an ultrahigh C₂H₂ storage capacity (191 cm³ g^-1, or 213 cm³ cm^-3) but much less CO₂ uptake (90 cm³ g^-1) under ambient conditions. The C₂H₂ adsorption amount of MIL-160 is remarkably higher than those for the other two isostructural MOFs (86 and 119 cm³ g^-1 for CAU-10H and CAU-23, respectively) under the same conditions. More importantly, both simulation and experimental breakthrough results show that MIL-160 sets a new benchmark for equimolar C₂H₂/CO₂ separation in terms of the separation potential (Δq_break = 5.02 mol/kg) and C₂H₂ productivity (6.8 mol/kg). In addition, in situ FT-IR experiments and computational modeling further reveal that the unique host-guest multiple hydrogen-bonding interaction between the nanotrap and C₂H₂ is the key factor for achieving the extraordinary acetylene storage capacity and superior C₂H₂/CO₂ selectivity. This work provides a novel and powerful approach to address the tradeoff of this extremely challenging gas separation.

The First Sulfate-Pillared Hybrid Ultramicroporous Material, SOFOUR-1-Zn, and its Acetylene Capture Properties

Hybrid ultramicroporous materials, HUMs, are comprised of metal cations linked by combinations of inorganic and organic ligands. Their modular nature makes them amenable to crystal engineering studies, which have thus far afforded four HUM platforms (as classified by the inorganic linkers). HUMs are of practical interest because of their benchmark gas separation performance for several industrial gas mixtures. We report herein design and gram‐scale synthesis of the prototypal sulfate‐linked HUM, the fsc topology coordination network ([Zn(tepb)(SO₄)]_n), SOFOUR‐1‐Zn, tepb=(tetra(4‐pyridyl)benzene). Alignment of the sulfate anions enables strong binding to C₂H₂ via O⋅⋅⋅HC interactions but weak CO₂ binding, affording a new benchmark for the difference between C₂H₂ and CO₂ heats of sorption at low loading (ΔQ_st=24 kJ mol⁻¹). Dynamic column breakthrough studies afforded fuel‐grade C₂H₂ from trace (1 : 99) or 1 : 1 C₂H₂/CO₂ mixtures, outperforming its SiF₆²⁻ analogue, SIFSIX‐22‐Zn.

Three-in-One C2 H2 -Selectivity-Guided Adsorptive Separation across an Isoreticular Family of Cationic Square-Lattice MOFs

Energy-efficient selective physisorption driven C₂ H₂ separation from industrial C2-C1 impurities such as C₂ H₄ , CO₂ and CH₄ is of great importance in the purification of downstream commodity chemicals. We address this challenge employing a series of isoreticular cationic metal-organic frameworks, namely iMOF-nC (n=5, 6, 7). All three square lattice topology MOFs registered higher C₂ H₂ uptakes versus the competing C2-C1 gases (C₂ H₄ , CO₂ and CH₄ ). Dynamic column breakthrough experiments on the best-performing iMOF-6C revealed the first three-in-one C₂ H₂ adsorption selectivity guided separation of C₂ H₂ from 1:1 C₂ H₂ /CO₂ , C₂ H₂ /C₂ H₄ and C₂ H₂ /CH₄ mixtures. Density functional theory calculations critically examined the C₂ H₂ selective interactions in iMOF-6C. Thanks to the abundance of square lattice topology MOFs, this study introduces a crystal engineering blueprint for designing C₂ H₂ -selective layered metal-organic physisorbents, previously unreported in cationic frameworks.