Development of ultrafiltration membrane via in-situ grafting of nano-GO/PSF with anti-biofouling properties

Membrane Surface Modification via In Situ Grafting of GO/Pt Nanoparticles for Nitrate Removal with Anti-Biofouling Properties

Nanofiltration processes for the removal of emerging contaminants such as nitrate are a focus of attention of research works as an efficient technique for providing drinking water for people. Polysulfone (PSF) nanofiltration membranes containing graphene oxide (GO)/Pt (0, 0.25, 0.5, 0.75, 1 wt%) nanoparticles were generated with the phase inversion pathway. The as-synthesized samples were characterized by FTIR, SEM, AFM, and contact angle tests to study the effect of GO/Pt on hydrophilicity and antibacterial characteristics. The results conveyed that insertion of GO/Pt dramatically improved the biofouling resistance of the membranes. Permeation experiments indicated that PSF membrane embracing 0.75 wt% GO/Pt nanoparticles had the highest nitrate flux and rejection ability. The membrane's configuration was simulated using OPEN-MX simulating software indicating membranes maintaining 0.75 wt% of GO/Pt nanoparticles revealed the highest stability, which is well in accordance with experimental outcomes.

A Literature Review of Modelling and Experimental Studies of Water Treatment by Adsorption Processes on Nanomaterials

A significant growth in the future demand for water resources is expected. Hence researchers have focused on finding new technologies to develop water filtration systems by using experimental and simulation methods. These developments were mainly on membrane-based separation technology, and photocatalytic degradation of organic pollutants which play an important role in wastewater treatment by means of adsorption technology. In this work, we provide valuable critical review of the latest experimental and simulation methods on wastewater treatment by adsorption on nanomaterials for the removal of pollutants. First, we review the wastewater treatment processes that were carried out using membranes and nanoparticles. These processes are highlighted and discussed in detail according to the rate of pollutant expulsion, the adsorption capacity, and the effect of adsorption on nanoscale surfaces. Then we review the role of the adsorption process in the photocatalytic degradation of pollutants in wastewater. We summarise the comparison based on decomposition ratios and degradation efficiency of pollutants. Therefore, the present article gives an evidence-based review of the rapid development of experimental and theoretical studies on wastewater treatment by adsorption processes. Lastly, the future direction of adsorption methods on water filtration processes is indicated.

Adsorption, degradation, and mineralization of emerging pollutants (pharmaceuticals and agrochemicals) by nanostructures: a comprehensive review

This review discusses a fresh pool of research findings reported on the multiple roles played by metal-based, magnetic, graphene-type, chitosan-derived, and sonicated nanoparticles in the treatment of pharmaceutical- and agrochemical-contaminated waters. Some main points from this review are as follows: (i) there is an extensive number of nanoparticles with diverse physicochemical and morphological properties which have been synthesized and then assessed in their respective roles in the degradation and mineralization of many pharmaceuticals and agrochemicals, (ii) the exceptional removal efficiencies of graphene-based nanomaterials for different pharmaceuticals and agrochemicals molecules support arguably well a high potential of these nanomaterials for futuristic applications in remediating water pollution issues, (iii) the need for specific surface modifications and functionalization of parent nanostructures and the design of economically feasible production methods of such tunable nanomaterials tend to hinder their widespread applicability at this stage, (iv) supplementary research is also required to comprehensively elucidate the life cycle ecotoxicity characteristics and behaviors of each type of engineered nanostructures seeded for remediation of pharmaceuticals and agrochemicals in real contaminated media, and last but not the least, (v) real wastewaters are extremely complex in composition due to the mix of inorganic and organic species in different concentrations, and the presence of such mixed species have different radical scavenging effects on the sonocatalytic degradation and mineralization of pharmaceuticals and agrochemicals. Moreover, the formulation of viable full-scale implementation strategies and reactor configurations which can use multifunctional nanostructures for the effective remediation of pharmaceuticals and agrochemicals remains a major area of further research.

Zwitterionic Polymer Brush Grafted on Polyvinylidene Difluoride Membrane Promoting Enhanced Ultrafiltration Performance with Augmented Antifouling Property

Superhydrophilic zwitterions on the membrane surface have been widely exploited to improve antifouling properties. However, the problematic formation of a <20 nm zwitterionic layer on the hydrophilic surface remains a challenge in wastewater treatment. In this work, we focused on the energy consumption and time control of polymerization and improved the strong hydrophilicity of the modified polyvinylidene difluoride (PVDF) membrane. The sulfobetaine methacrylate (SBMA) monomer was treated with UV-light through polymerization on the PVDF membrane at a variable time interval of 30 to 300 s to grow a poly-SBMA (PSBMA) chain and improve the membrane hydrophilicity. We examined the physiochemical properties of as-prepared PVDF and PVDF-PSBMA_x using numeric analytical tools. Then, the zwitterionic polymer with controlled performance was grafted onto the SBMA through UV-light treatment to improve its antifouling properties. The PVDF-PSBMA_120s modified membrane exhibited a greater flux rate and indicated bovine serum albumin (BSA) rejection performance. PVDF-PSBMA_120s and unmodified PVDF membranes were examined for their antifouling performance using up to three cycles dynamic test using BSA as foulant. The PVDF-modified PSBMA polymer improved the antifouling properties in this experiment. Overall, the resulting membrane demonstrated an enhancement in the hydrophilicity and permeability of the membrane and simultaneously augmented its antifouling properties.

Two novel drugs as bio-functional inhibitors for copper performing excellent anticorrosion and antibacterial properties

Two drugs (cefpirome, cefixime) as dual-action inhibitors could self-organize on copper surface forming bio-functional protective film, which effectively prevents copper corrosion in the picking process with an excellent performance on the resistance of Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) results showed that studied drugs can self-organize on copper surface successfully forming adsorption film to protect copper. The results also indicated that N/S atoms with the lone pair electrons in the drugs donated electrons to the vacant orbital of Cu occupying the active sites of copper surface. Electrochemistry and surface morphology study revealed that the corrosion inhibition efficiency of cefixime was better than cefpirome. Furthermore, adsorption isotherm study suggested that the adsorption was spontaneous chemical and physical adsorption, obeying Langmuir adsorption.

Preparation and characterization of nano-filtration and its photocatalytic abilities via pre-coated and self-forming dynamic membranes developed by ZnO, PAC and chitosan

In the current work, novel dynamic membranes (DM) were tested and introduced for cheese whey wastewater treatment based on resistant and inexpensive materials, polyesters, and chitosan. For the investigation of dynamic membrane (pre-coated and self-forming) characterizations, polyester as a low-cost and natural material with chitosan were chosen to provide the support of the target membrane. The inherent antifouling character of chitosan accompanied by its high hydrophilicity have made this polymer known as an attractive agent for membrane-based wastewater treatment operations. Zinc oxide (ZnO) and powdered activated carbon (PAC) were employed as the dynamic layer. Neat polyester had a chemical oxygen demand (COD) rejection ratio of about 57.61%, but the flux declined sharply. The higher removal efficiency was for the self-forming type: total phosphate (94%) and citrate (95.5%). Fouled dynamic membranes were backwashed by sodium dodecyl-sulphate (SDS), warm water, and distilled water. Results demonstrated that the pre-coated was reduced and fouling increased the flux recovery rate (FRR) (9.1%) while use of the self-forming DM exhibited an aggravation of fouling by decreasing of support FRR (11.1%). It was found that by substitution of deionized water and hot water with SDS, FRR was enhanced. In the following, the photocatalytic ability of the product was investigated. The UV light source increased the removal ratio and FRR. For example, self-forming COD rejection was enhanced (6.63%).