Determination of histamine and histidine by capillary zone electrophoresis with pre-column naphthalene-2,3-dicarboxaldehyde derivatization and fluorescence detection

Highly sensitive biosensors for real-time monitoring of histamine at acupoint PC6 in rats based on graphene-modified acupuncture needles

Acupoints are the local initial response sites of acupuncture therapeutic effects. As a biomarker, histamine is released into the acupoint region and plays its role concurrently as acupuncture needles are inserted into acupoints. Hence, real-time monitoring of histamine at acupoints is important to elucidate the effectiveness of the acupoint-activation process in acupuncture. Therefore, we developed highly sensitive acupuncture/Au particles/graphene biosensors by electrodeposition, brushing, and annealing methods based on bare acupuncture needles. We achieved a histamine detection limit of approximately 4.352 (±3.419) × 10-12 mol L-1 and good sensitivity of approximately 6.296 (±3.873) μA μM-1, with satisfactory specificity, repeatability, and stability in vitro, rendering them more competitive and suitable for real-time monitoring in vivo without causing additional damage. Subsequently, we conducted real-time histamine monitoring at non-acupoint and acupoint PC6 in rats, respectively. Our results showed minimal changes at the non-acupoint, whereas a trend of initial increase followed by a decrease was observed at acupoint PC6. The change in histamine concentration at acupoint PC6 reflected its involvement in the acupoint-activation procedure. Moreover, its peak position at ∼18 min could provide guidance for optimizing needle retaining time for maximum therapeutic effect. This work presents the first real-time in vivo monitoring of histamine at acupoints with high sensitivity and underscores the specificity of histamine release between non-acupoint and acupoint PC6, demonstrating great potential for elucidating the acupoint-activation mechanisms in acupuncture. Additionally, this work expands the application of nanomaterials in the integration of medicine and engineering, which is an important aspect of the future development of materials science.

Aggregation-induced emission enhancement of gold nanoclusters triggered by sodium heparin and its application in the detection of sodium heparin and alkaline amino acids

This work first reported that sodium heparin could cause the aggregation-induced emission enhancement (AIEE) effect of GSH-AuNCs (Glutathione functionalized gold nanoclusters). While it was interestingly found that the addition of alkaline amino acids would greatly weaken this effect. Thus, fluorescent system was designed for the quantitative detection of sodium heparin and alkaline amino acids. Negatively charged sodium heparin would connect with GSH-AuNCs through electrostatic attraction, leading to a significant AIEE effect. Then alkaline amino acids would competitively bind with sodium heparin, causing this effect to almost disappear. The reasons were as follows: (I) The hydrogen bonding between sodium heparin and alkaline amino acids was much stronger than electrostatic force, causing GSH-AuNCs to be competitively replaced. (II) Alkaline amino acids and GSH-AuNCs were both positively charged and repelled each other. The presence of alkaline amino acids would hinder the AIEE effect. (III) AIEE effect was confirmed to have a close relationship with the pH value which could be greatly affected by alkaline amino acids. (Ⅳ) Not only the hydrogen bonding, the electrostatic force also existed between the alkaline amino acids and sodium heparin. All the above reasons worked together to weaken the AIEE effect of GSH-AuNCs triggered by sodium heparin. Finally, both sodium heparin and alkaline amino acids were accurately detected, showing good correlation coefficients of 0.99 with the LODs of 0.0100 mg/mL (sodium heparin), 1.05 μM (histidine), 3.38 μM (arginine) and 6.16 μM (lysine), respectively.

Phase transferred and non-coated, water soluble perovskite quantum dots for biocompatibility and sensing

Despite the excellent optoelectronic properties exhibited by CsPbBr₃ QDs (PQDs) for sensing applications, their poor resistance to water does not allow their utilization as probes to detect analytes in aqueous media. The present work provides water soluble PQDs (dispersed in water) prepared by an appropriate phase engineering of the ligand. The dicarboxylate functional ligands at a particular pH allow the protonated state to form solvated carboxyl dimers, which interconnects PQDs, thus avoiding Ostwald ripening and enhancing the photoluminescence quantum yield (PLQY). As a proof of concept, this probe was applied to detect bioamines in water, namely histamine, hexamethylenediamine, phenethylamine, dopamine and thiamine. The probe is highly selective to histamine at concentrations below 500 nM and this selectivity of histamine over dopamine is very interesting and rarely reported. More importantly, this work offers a standard protocol for transferring PQDs from the organic to aqueous phase, for the detection of such biomolecules in water.

Positional Isomeric Symmetric Dipodal Receptors Dangled with Rotatable Binding Scaffolds: Fluorescent Sensing of Silver Ions and Sequential Detection of l-Histidine and Their Multifarious Applications

Three simple dipodal artificial acyclic symmetric receptors, SDO, SDM, and SDP, driven by positional isomerism based on xylelene scaffolds were designed, synthesized, and characterized by ¹H NMR, ¹³C NMR, and mass spectroscopy techniques. Probes SDO, SDM, and SDP demonstrated selective detection of Ag⁺ metal ions and amino acid l-histidine in a DMSO-H₂O solution (1:1 v/v, HEPES 50 mM, pH = 7.4). The detection of Ag⁺ metal ions occurred in three ways: (i) inhibition of the photoinduced electron-transfer (PET) process, (ii) blueshifted fluorescence enhancement via the intramolecular charge-transfer (ICT) process, and (iii) restricted rotation of the dangling benzylic scaffold following coordination with a Ag⁺ metal ion. Job's plot analysis and quantum yields confirm the binding of probes to Ag⁺ in 1:1, 1:2, and 1:2 ratios with LODs and LOQs found to be 1.3 μM and 3.19 × 10^-7 M, 6.40 × 10^-7 and 2.44 × 10 ^-6 M, and 9.76 × 10^-7 and 21.01 × 10^-7 M, respectively. ¹H NMR titration, HRMS, ESI-TOF, IR analysis, and theoretical DFT investigations were also used to establish the binding stoichiometry. Furthermore, the probes were utilized for the detection of Ag⁺ ions in water samples, food samples, soil analysis, and bacterial imaging in Escherichia coli cells and a molecular logic gate was constructed.

Pollution, Exposure and Risk of Biogenic Amines in Canned Sea Fish: Classification of Analytical Methods Based on Carbon Spheres QuEChERS Extraction Combined with HPLC

This study investigated the pollution characteristics, exposure levels and health risk assessments of seven kinds of biogenic amines (BAs) in eight varieties of canned sea fish products (n = 131) on the Chinese market. Carbon spheres QuEChERS mixed dispersion solid phase extraction combined with HPLC was used for the classification and analysis of batch samples. The average recovery of single BAs obtained by this method is 92.3~97.7%, and the relative standard deviation is 1.9~4.8%. Different varieties of samples have different degrees of pollution, the mass concentration of single BAs range 0.45~27.74 mg/kg, and the total concentration of ΣBAs range 18.77~368.50 mg/kg, of which the concentration of Σ4BAs range 11.53~368.50 mg/kg. The composition of four BAs is mainly putrescine, cadaverine, histamine and tyramine, which always play an important role in the exposure level and risk assessment of samples. The exposure level of BAs in the human body ranges 67.03~209.52 μg∙kg−1∙d−1. The health risk assessment shows that the gender trend of exposure risk level of BAs is male > female (young age), female > male (middle and old age), the age trend is young age > old age > middle age, and the regional trend is city > countryside. The food safety index of BAs in samples is 0.0062~0.0195, which is far less than 1, so the risk is within the controllable range.

Development and Validation of a Simple, Selective, and Accurate Reversed-Phase Liquid Chromatographic Method with Diode Array Detection (RP-HPLC/DAD) for the Simultaneous Analysis of 18 Free Amino Acids in Topical Formulations

Even though there are reported methods for the quantification of free amino acids (FAAs) in biological products, no work has been done on the analysis of these substances in formulations. Moreover, further research is required as the reported methods do not fulfill analytical method requirements. The objective of this study was, therefore, to develop and validate a rapid, reliable, and appropriate RP-HPLC/DAD method for the simultaneous determination of 18 FAAs (l-Ala, l-Arg, l-Asn, l-Asp, l-Gln, l-Glu, l-Gly, l-His, l-Ile, l-Lue, l-Lys, l-Met, l-Orn, l-Phe, l-Pro, l-Ser, l-Thr, and l-Val) in topical formulations. After appropriate method development, the technique was validated for selectivity, linearity and range, limit of detection, limit of quantification, precision, and accuracy. The samples were derivatized with 9-fluorenylmethyl chloroformate (Fmoc-Cl). Chromatographic separation was performed on InfinityLab Poroshell 120 E.C 18 (3 × 50) mm, 2.7 μm column at 25 °C. The mobile phase consisting of water and acetonitrile adjusted to appropriate pH was pumped in gradient mode at a flow rate of 0.7 mL/min. Ten microliters were injected and analyte detection was conducted using a DAD. The results indicate that the method was selective for these FAAs. It was linear over the concentration range of 5–80 µM with a correlation coefficient greater than 0.995. Moreover, it was sensitive, precise, accurate, and robust. All the reported drawbacks of RP-HPLC-based analysis of FAAs were resolved, and hence, this new method can be considered appropriate for the analysis of these FAAs in topical formulations.

Interfacial Super-Assembly of Nanofluidic Heterochannels from Layered Graphene and Alumina Oxide Arrays for Label-Free Histamine-Specific Detection

Nanofluidic devices with well-defined channels have shown great potential for biosensing, separation and, energy conversion. Recently, two-dimensional (2D) materials have been widely used for constructing novel nanofluidic devices owing to their high specific surface, abundant surface charge, and low cost. However, 2D-based nanofluidic devices for highly sensitive biosensing have drawn little attention. Herein, we developed a 2D material-based nanofluidic heterochannel with an asymmetric T-mode nanochannel structure and surface charge polarization distribution. This heterochannel was composed of layered graphene oxide modified with Nα, Nα-bis(carboxymethyl)-l-lysine (containing metal-nitrilotriacetic chelates, NTA) and an oxide array (NTA-GO/AAO), which can achieve remarkable selectivity, specificity, and label-free detection of the neurotransmitter histamine based on a metal ion displacement mechanism. A detection limit of 1 nM can be obtained using the NTA-GO/AAO heterochannel. This study provides a simple and label-free platform for developing a 2D-based nanofluidic heterochannel for specific molecular detection.

Histidine-triggered turning-on of gold/copper nanocluster fluorescence for the sensitive and selective detection of histidine

Gold/copper nanoclusters with histidine-triggered turn-on fluorescence for sensing histidine sensitively and selectively.

Spiropyran-modified upconversion nanocomposite as a fluorescent sensor for diagnosis of histidinemia

Histidinemia is a congenital metabolic disorder where the histidine (His) metabolism is blocked, resulting in increased concentrations of His in blood and urine. The disease causes an abnormal development of the patient's nervous system, which leads to many serious illnesses. Therefore, it is very important to diagnose early. In this study, we developed a novel fluorescent nanosensor NaGdF₄:Yb³⁺, Er³⁺@SiO₂–spiropyran (UCNP@SiO₂–SP). The nanosensor displayed a “turn-off” fluorescence response towards His. When His was mixed with UCNP@SiO₂–SP, His could specifically bind to SP, which could cause the isomerization of SP. The structure of SP was changed from spiroform into merocyanine form. The luminescence of the sensor was overlapped with the absorption of the merocyanine form. As a result, His will lead to fluorescence quenching of the sensor based on inner filter effects (IFE), which can be used to detect His. Importantly, as the first report of a UCNP@SiO₂–SP nanosensor for detecting His, this method exhibits good selectivity and anti-interference capability. The detection limit is 4.4 μM. In addition, the amount of His in urine was also measured, suggesting the applicability of this sensor for histidinemia diagnosis.

A novel sensor based on upconversion fluorescent nanoparticles was developed and used to diagnose histidinemia.

A sensitive and selective electroanalysis strategy for histidine using the wettable well electrodes modified with graphene quantum dot-scaffolded melamine and copper nanocomposites

A wettable well was fabricated on an electrode, which was further modified with carbon quantum dot-scaffolded nanocomposites of melamine and copper for probing histidine through a unique displacement reaction route. The developed electrode with wettable well enables the condensing enrichment of analytes from the sample droplets, improving the electroanalytical sensitivity.

Current Trends in Detection of Histamine in Food and Beverages

Histamine is a heterocyclic amine formed by decarboxylation of the amino acid l-histidine. It is involved in the local regulation of physiological processes but also can occur exogenously in the food supply. Histamine is toxic at high intakes; therefore, determination of the histamine level in food is an important aspect of food safety. This article will review the current understanding of physiological functions of endogenous and ingested histamine with a particular focus placed on existing and emerging technologies for histamine quantification in food. Methods reported in this article are sequentially arranged and provide a brief overview of analytical methods reported, including those based on nanotechnologies.

Bright Yellow Fluorescent Carbon Dots as a Multifunctional Sensing Platform for the Label-Free Detection of Fluoroquinolones and Histidine

Owing to their diverse properties, fluorescent carbon dots (CDs) have attracted more attention and present enormous potential in development of sensors, bioimaging, drug delivery, microfluidics, photodynamic therapy, light emitting diode, and so forth. Herein, a multifunctional sensing platform based on bright yellow fluorescent CDs (Y-CDs) was designed for the label-free detection of fluoroquinolones (FQs) and histidine (His). The Y-CDs with superior optical and biological merits including high chemical stability, good biocompatibility, and low cytotoxicity were simply synthesized via one-step hydrothermal treatment of o-phenylenediamine ( o-PD) and 4-aminobutyric acid (GABA). The Y-CDs can be utilized to directly monitor the amount of FQs based on fluorescence static quenching owing to the specific interaction between FQs and Y-CDs. Then, the fluorescence of this system can be effectively recovered upon addition of His. The multifunctional sensing platform exhibited high sensitivity and selectivity toward three kinds of FQs and His with low detection limits of 17-67 and 35 nM, respectively. Benefiting from these outstanding characters, the Y-CDs were successfully employed for trace detection of FQs in real samples such as antibiotic tablets and milk products. Furthermore, the probe was also extended to cellular imaging. All of the above prove that this multifunctional sensing platform presents great prospect in multiple applications such as biosensing, biomedicine, disease diagnosis, and environmental monitoring.

A novel label-free colorimetric detection of l-histidine using Cu2+-modulated G-quadruplex-based DNAzymes

We proposed a colorimetric method for l-histidine detection based on Cu²⁺-mediated DNAzyme and G-quadruplex-hemin complex catalyzed oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS). In this system, after the addition of l-histidine, the formation of G-quadruplex-hemin complex will be disturbed, thus the colorimetric signal intensity conversely corresponds to the concentration of histidine. In this assay, a lower detection limit of l-histidine (50 nM) is addressed comparing to previously reported colorimetric methods. The cost is extremely low as the proposed design is both label-free and enzyme-free. All the more vitally, the colorimetric detection procedure is substantially straightforward with no further modification processes. By and large, the sensor can provide a promising plan for the detection of l-histidine.

A facile molecularly imprinted polymer-based fluorometric assay for detection of histamine

Histamine is a biogenic amine naturally present in many body cells. It is also a contaminant that is mostly found in spoiled food. The consumption of foods containing high levels of histamine may lead to an allergy-like food poisoning. Analytical methods that can routinely screen histamine are thus urgently needed. In this paper, we developed a facile and cost-effective molecularly imprinted polymer (MIP)-based fluorometric assay to directly quantify histamine. Histamine-specific MIP nanoparticles (nanoMIPs) were synthesized using a modified solid-phase synthesis method. They were then immobilized in the wells of a microplate to bind the histamine in aqueous samples. After binding, o-phthaldialdehyde (OPA) was used to label the bound histamine, which converted the binding events into fluorescent signals. The obtained calibration curve of histamine showed a linear correlation ranging from 1.80 to 44.98 μM with the limit of detection of 1.80 μM. This method was successfully used to detect histamine in spiked diary milk with a recovery rate of more than 85%.

Highly sensitive fluorescent detection of glutathione and histidine based on the Cu(ii)-thiamine system

A novel fluorescence method for the simultaneous detection of glutathione and histidine based on their inhibitory effects on the oxidation of thiamine by Cu(ii) is proposed.

Ultratrace Detection of Histamine Using a Molecularly-Imprinted Polymer-Based Voltammetric Sensor

Rapid and cost-effective analysis of histamine, in food, environmental, and diagnostics research has been of interest recently. However, for certain applications, the already-existing biological receptor-based sensing methods have usage limits in terms of stability and costs. As a result, robust and cost-effective imprinted polymeric receptors can be the best alternative. In the present work, molecularly-imprinted polymers (MIPs) for histamine were synthesized using methacrylic acid in chloroform and acetonitrile as two different porogens. The binding affinity of the MIPs with histamine was evaluated in aqueous media. MIPs synthesized in chloroform displayed better imprinting properties for histamine. We demonstrate here histamine MIPs incorporated into a carbon paste (CP) electrode as a MIP-CP electrode sensor platforms for detection of histamine. This simple sensor format allows accurate determination of histamine in the sub-nanomolar range using an electrochemical method. The sensor exhibited two distinct linear response ranges of 1 × 10^-10-7 × 10^-9 M and 7 × 10^-9-4 × 10^-7 M. The detection limit of the sensor was calculated equal to 7.4 × 10^-11 M. The specificity of the proposed electrode for histamine is demonstrated by using the analogous molecules and other neurotransmitters such as serotonin, dopamine, etc. The MIP sensor was investigated with success on spiked serum samples. The easy preparation, simple procedure, and low production cost make the MIP sensor attractive for selective and sensitive detection of analytes, even in less-equipped laboratories with minimal training.

A genetically encoded toolkit for tracking live-cell histidine dynamics in space and time

High-resolution spatiotemporal imaging of histidine in single living mammalian cells faces technical challenges. Here, we developed a series of ratiometric, highly responsive, and single fluorescent protein-based histidine sensors of wide dynamic range. We used these sensors to quantify subcellular free-histidine concentrations in glucose-deprived cells and glucose-fed cells. Results showed that cytosolic free-histidine concentration was higher and more sensitive to the environment than free histidine in the mitochondria. Moreover, histidine was readily transported across the plasma membrane and mitochondrial inner membrane, which had almost similar transport rates and transport constants, and histidine transport was not influenced by cellular metabolic state. These sensors are potential tools for tracking histidine dynamics inside subcellular organelles, and they will open an avenue to explore complex histidine signaling.

Bimodal counterpropagating-responsive sensing material for the detection of histamine

A dual-mode system for simultaneous fluorescence and SERS sensing of histamine.

Inhibition of double-stranded DNA templated copper nanoparticles as label-free fluorescent sensors for l-histidine detection

A label-free fluorescent sensing strategy was reported for l-histidine detection by the inhibition of double-stranded DNA templated copper nanoparticles.

A highly selective phosphorescence probe for histidine in living bodies

A heterobimetallic ruthenium(ii)–nickel(ii) complex has been developed for phosphorescence imaging of histidine in live cells and bodies.

Tyrosine-functionalized CuInS2 quantum dots as a fluorescence probe for the determination of biothiols, histidine and threonine

A novel, rapid and highly sensitive fluorescence turn-on assay for the detection of biothiols (glutathione, and L-cysteine), histidine and threonine was developed. Water-soluble CuInS2 ternary quantum dots (QDs) capped by mercaptopropionic acid (MPA) were directly synthesized in aqueous solution, and then functionalized using tyrosine molecules to form tyrosine-functionalized CuInS2 QDs (T-CuInS2 QDs). The fluorescence of T-CuInS2 QDs would decrease in the presence of Cu(2+) due to the coordination effect of phenolic hydroxyls of the tyrosine molecules. Subsequently, the addition of biothiols (glutathione and L-cysteine), histidine or threonine could turn on the fluorescence of the T-CuInS2 QDs-Cu(2+) system due to their strong affinity for Cu(2+). The proposed method was simple in design and fast in operation, and it was applied for the detection of glutathione, L-cysteine, histidine, and threonine in human serum samples with satisfactory results.

Detection and quantification of neurotransmitters in dialysates

Sensitive analytical methods are needed for the separation and quantification of neurotransmitters obtained in microdialysate studies. This unit describes methods that permit quantification of nanomolar concentrations of monoamines and their metabolites (high-performance liquid chromatography [HPLC] electrochemical detection), acetylcholine (HPLC-coupled to an enzyme reactor), and amino acids (HPLC-fluorescence detection, capillary electrophoresis with laser-induced fluorescence detection).

A portable chemical sensor for histidine based on the strategy of click chemistry

A novel portable chemical sensor is developed in combination of the personal glucose meters (PGM) with click chemistry for sensitive and selective determination of histidine. Invertase-labeled alkynyl-DNA can be modified onto the surfaces of Streptavidin Magnespheres Paramagnetic Particles (PMPs) through copper(I) catalyzed azide-alkyne cycloaddition (CuAAC) reaction and formed invertase-functionalized PMPs, which can be separated easily. The presence of invertase can convert sucrose to glucose and can be monitored by the PGM easily. The presence of histidine can inhibit the CuAAC, so the read-out signal of PGM decreased. The difference in signals from the PGM before and after addition of histidine has a good linear correlation with the logarithm of the histidine concentrations in the range of 0.01~100 μM with a detection limit of 3.4 nM, which is lower than those of many other chemical sensors. Moreover, the assay of histidine in milk samples is demonstrated with satisfactory results.

A label-free G-quadruplex-based luminescent switch-on assay for the selective detection of histidine

A label-free G-quadruplex-based luminescent switch-on assay has been developed for the selective detection of micromolar histidine in aqueous solution. In this study, an iridium(III) complex was employed as a G-quadruplex-specific luminescent probe while a guanine-rich oligonucleotide (Pu27, 5'-TG4AG3TG4AG3TG4A2G2-3')/cupric ion (Cu(2+)) ensemble was employed as a recognition unit for histidine. The initial luminescence of the iridium(III) complex in the presence of G-quadruplex DNA is effectively quenched by Cu(2+) ions due to the Cu(2+)-mediated unfolding of the G-quadruplex motif. The addition of histidine sequesters Cu(2+) ions from the ensemble, thereby restoring the luminescence of the system. The assay could detect down to 1 μM of histidine in aqueous media, and also exhibited good selectivity for histidine over other amino acids with the use of the cysteine, masking agent N-ethylmaleimide. Furthermore, the application of the assay for the detection of histidine in diluted urine samples was demonstrated.