Sequential injection extraction based on restricted access material for determination of furosemide in serum

Ferric iron loaded porphyrinic zirconium MOFs on corncob for the enhancement of diuretics extraction

Herein, corncob waste was used as a scaffold for the fabrication of effective adsorbents. Porphyrinic zirconium metal-organic frameworks (MOFs) PCN-223 and PCN-224 constructed by different numbers of Zr6 cluster nodes were grown on the surface of the corncob. Fe (Ш) ions were implanted in the porphyrin ring by post-synthesis modification. The results showed that the extraction capacity of diuretics on PCN-224@corncob containing suitable pore size was larger than that of PCN-223@corncob. The adsorption of diuretics was further enhanced because of the electrostatic effect caused by implantation of Fe (Ш) ions. PCN-224-Fe@corncob was recyclable and selective for the extraction of furosemide (Fur) and bumetanide (Bum). Coupled in-syringe solid phase extraction (IS-SPE) with ultra-performance liquid chromatography (UPLC), an efficient, sensitive, and stable method was established. With a sensitivity between 0.6 and 1.0 μg/L and a recovery between 83.2% and 119.2%, it is used for the analysis of trace amounts of Fur and Bum in weight loss products and environmental water. The functionalized corncob has potential application for the adsorption of diuretics, and the metal ions implantation in MOFs provides a promising strategy for enhancing extraction capacity.

Development and validation of HPTLC and green HPLC methods for determination of furosemide, spironolactone and canrenone, in pure forms, tablets and spiked human plasma

Two selective and accurate chromatographic methods are presented for simultaneous quantitation of spironolactone (SP) and furosemide (FR) and canrenone (CN), the main degradation product and the main active metabolite of SP. Method A was HPTLC, where separation was completed on silica gel HPTLC F₂₅₄ plates using ethyl acetate-triethylamine-acetic acid (9:0.7:0.5, by volume) as a developing system and UV detection at 254 nm. Method B was a green isocratic RP-HPLC utilizing a C₁₈ (4.6 × 100 mm) column, the mobile phase consisting of ethanol-deionized water (45: 55, v/v) and UV estimation at 254 nm. Adjustment of flow rate at 1 mL/min and pH at 3.5 with glacial acetic acid was done. Regarding the greenness profile, the proposed RP-HPLC method is greener than the reported one. ICH guidelines were followed to validate the developed methods. Successful applications of the developed methods were revealed by simultaneous determination of FR, SP and CN in pure forms and plasma samples in the ranges of 0.2-2, 0.05-2.6 and 0.05-2 μg/band for method A and 5-60, 2-60 and 2-60 μg/mL for method B for FR, SP and CN, respectively.

Successive ratio subtraction as a novel manipulation of ratio spectra for quantitative determination of a mixture of furosemide, spironolactone and canrenone

Furosemide and spironolactone are commonly prescribed antihypertensive drugs. Canrenone is the main degradation product and main metabolite of spironolactone. Ratio subtraction and extended ratio subtraction spectrophotometric methods were previously applied for quantitation of only binary mixtures. An extension of the above mentioned methods; successive ratio subtraction, is introduced in the presented work for quantitative determination of ternary mixtures exemplified by furosemide, spironolactone and canrenone. Manipulating the ratio spectra of the ternary mixture allowed their determination at 273.6nm, 285nm and 240nm and in the concentration ranges of (2-16μgmL^-1), (4-32μgmL^-1) and (1-18μgmL^-1) for furosemide, spironolactone and canrenone, respectively. Method specificity was ensured by the application to laboratory prepared mixtures. The introduced method was ensured to be accurate and precise. Validation of the developed method was done with respect to ICH guidelines and its validity was further ensured by the application to the pharmaceutical formulation. Statistical comparison between the obtained results and those obtained from the reported HPLC method was achieved concerning student's t-test and F ratio test where no significant difference was observed.

Fast Determination of Salicylic Acid in Pharmaceuticals by Using a Terbium-Sensitized Luminescent SIA Optosensor

In this article, we report the coupling of sequential injection analysis (SIA) and solid phase lanthanide-sensitized luminescence as a detection technique; in this technique, the energy absorbed by the analyte (retained on a solid support) is transferred to the lanthanide ion, which finally emits the luminescence signal. By using this automatic system, the determination of salicylic acid (SA) is easily, rapidly, and selectively achieved. Microspheres of commercial solid support, Sephadex-QAE A-25, are used to fill the flow-through cell and retain analyte and terbium ions; after the signal from SA-terbium complex is obtained, the solid support is easily regenerated by using an ethylenediaminetetraacetic acid disodium salt 2-hydrate (EDTA) solution. Over 200 determinations can be carried out without replacing the resin microbeads. The proposed method shows a 0.045 microg mL(-1) detection limit, with an R.S.D. lower than 3% and a sampling frequency up to 30 samples per hour. The system has been applied to the determination of SA in pharmaceuticals obtained from the Spanish Pharmacopoeia, with satisfactory results; an additional recovery study has been carried out with recoveries close to 100%.

An overview of sequential injection chromatography

New generation of sequential injection analysis (SIA) called sequential injection chromatography (SIC) has already been consolidated as a good alternative of high performance liquid chromatography (HPLC) for fast analysis of simple samples. Benefits of flow methods are automation, miniaturization and low sample and mobile phase consumption. Implementation of short monolithic chromatographic column into SIA opens new area-on-line chromatographic separation of multi-compound sample in low-pressure flow system, with the advantage of flow programming and possibility of sample manipulation. In the presented review the potential of SIC and its comparison with HPLC for determination of pharmaceutical mixtures is discussed and outlines past and recent trends focused on separation with SIC.

Recent developments in extraction procedures relevant to analytical toxicology

Sample preparation is an important step in the development of an analytical method but is often regarded as time-consuming, laborious work. Optimum sample preparation leads to enhanced selectivity and sensitivity, however, and reduces amounts of interfering matrix compounds, resulting in less signal suppression or enhancement. Recent developments in extraction techniques that could be of interest in clinical and forensic toxicology, for example liquid-liquid, solid-phase, and headspace extraction, are summarized in this review. The advantages and disadvantages of several extraction techniques are discussed, to enable the reader to choose an appropriate method of extraction for his or her application. Attention is paid to current trends in analytical toxicology, for example miniaturization, high throughput, and automation.

Coupling of sequential injection analysis and capillary electrophoresis - Laser-induced fluorescence via a valve interface for on-line derivatization and analysis of amino acids and peptides

The on-line coupling of sequential injection analysis (SIA) and capillary electrophoresis (CE) via an in-line injection valve is presented. The SIA system is used for automated derivatization of amino acids and peptides. Dichlorotriazinylaminofluorescein serves as the derivatization agent, thus enabling sensitive laser-induced fluorescence detection of the derivatized analytes. The SIA procedure includes the following steps: (a) introduction of reagent and sample zones in a holding coil, (b) sample and reagent mixing in a reaction coil, (c) stop-flow step for increase of the reaction time, and (d) delivery of derivatized sample into the loop of the micro-valve interface. A small portion of the analyte zone is introduced electrokinetically in the separation capillary via the valve interface and CE analysis is performed. Factors affecting the CE separation, such as pH, the borate and sodium dodecyl sulphate concentration of the background electrolyte have been optimized. The derivatization conditions have been studied to obtain a high reaction yield in a relative short time. The transfer of a part of the reaction plug into the loop of the valve interface has been optimized. Using des-Tyr(1)-[Met]-enkephalinamide as test compound, it is demonstrated that after automated derivatization, on-line electrophoretic analysis could be achieved. Glycine has been selected as the internal standard in order to correct for variations in reaction time and filling of the injection loop. For the enkephalin, good reproducibility (RSD<4.5% calculated by the ratio of the peak areas) and linearity (0.5-5 microg mL(-1), R(2)>or=0.994) are obtained with a detection limit of 30 ng mL(-1) (S/N=3).

Incorporation of a monolithic column into sequential injection system for drug-protein binding studies

A sequential injection analysis (SIA) manifold was incorporated with a monolithic strong anion-exchanger disk for on-line drug-protein interaction studies. The antibiotic ciprofloxacin (CF) was selected as a model drug compound. The separation principle was based on the strong retention of bovine serum albumin (BSA) on the monolithic strong anion-exchanger and the liberation/release of the free form of the drug. Elution of the retained BSA was easily achieved by delivering a different mobile phase via the SIA manifold. The type of functional group of the monolithic support, the breakthrough volume and the injected volumes of CF and BSA were studied and optimized. The influence of the variation of incubation time was studied in on-line binding assays. Scatchard plot was employed to obtain the number of binding sites and the equilibrium binding constants. For the off-line study of the CF-BSA binding, two binding classes were determined with constants of (3.16+/-0.21)x10(6)M(-1) and (1.27+/-0.48)x10(4)M(-1) and 6.1+/-1.3 and 17.8+/-3.9 binding sites per class, respectively. In non-equilibrium binding experiments the binding rate constant was k(1)=785 M(-1)min(-1). All measurements were monitored with fluorescence (lambda(ext)=300 nm, lambda(em)=460 nm) and spectrophotometric detection (lambda=280 nm). To evaluate the accuracy of the developed method the obtained results were compared versus ultrafiltration experiments and were found in good agreement.