Simultaneous speciation analysis of Sb(III), Sb(V) and (CH3)3SbCl2 by high performance liquid chromatography-hydride generation-atomic fluorescence spectrometry detection (HPLC-HG-AFS): Application to antimony speciation in sea water

A critical review on the organo-metal(loid)s pollution in the environment: Distribution, remediation and risk assessment

Toxic metal(loid)s, e.g., mercury, arsenic, lead, and cadmium are known for several environmental disturbances creating toxicity to humans if accumulated in high quantities. Although not discussed critically, the organo-forms of these inorganic metal(loid)s are considered a greater risk to humans than their elemental forms possibly due to physico-chemical modulation triggering redox alterations or by the involvement of biological metabolism. This extensive review describes the chemical and physical causes of organometals and organometal(loid)s distribution in the environment with ecotoxicity assessment and potential remediation strategies. Organo forms of various metal(loid)s, such as mercury (Hg), arsenic (As), lead (Pb), tin (Sn), antimony (Sb), selenium (Se), and cadmium (Cd) have been discussed in the context of their ecotoxicity. In addition, we elaborated on the transformation, speciation and transformation pathways of these toxic metal(loid)s in soil-water-plant-microbial systems. The present review has pointed out the status of toxic organometal(loid)s, which is required to make the scientific community aware of this pressing condition of organometal(loid)s distribution in the environment. The gradual disposal and piling of organometal(loid)s in the environment demand a thorough revision of the past-present status with possible remediation strategies prescribed as reflected in this review.

Chemistry of Antimony in Radiopharmaceutical Development: Unlocking the Theranostic Potential of Sb Isotopes

Antimony-119 (119Sb) holds promise for radiopharmaceutical therapy (RPT), emitting short-range Auger and conversion electrons that can deliver cytotoxic radiation on a cellular level. While it has high promise theoretically, experimental validation is necessary for 119Sb in vivo applications. Current 119Sb production and separation methods face robustness and compatibility challenges in radiopharmaceutical synthesis. Limited progress in chelator development hampers targeted experiments with 119Sb. This review compiles literature on the toxicological, biodistribution and redox properties of Sb, along with existing Sb complexes, evaluating their suitability for radiopharmaceuticals. Sb(III) is suggested as the preferred oxidation state for radiopharmaceutical elaboration due to its stability in vivo and lack of skeletal uptake. While Sb complexes with both hard and soft donor atoms can be achieved, Sb thiol complexes offer enhanced stability and compatibility with the desired Sb(III) oxidation state. For 119Sb to find application in RPT, scientists need to make discoveries and advancements in the areas of isotope production, and radiometal chelation. This review aims to guide future research towards harnessing the therapeutic potential of 119Sb in RPT.

Extracellular proteins of Desulfovibrio vulgaris as adsorbents and redox shuttles promote biomineralization of antimony

Biomineralization is the key process governing the biogeochemical cycling of multivalent metals in the environment. Although some sulfate-reducing bacteria (SRB) are recently recognized to respire metal ions, the role of their extracellular proteins in the immobilization and redox transformation of antimony (Sb) remains elusive. Here, a model strain Desulfovibrio vulgaris Hildenborough (DvH) was used to study microbial extracellular proteins of functions and possible mechanisms in Sb(V) biomineralization. We found that the functional groups (N-H, CO, O-CO, NH₂-R and RCOH/RCNH₂) of extracellular proteins could adsorb and fix Sb(V) through electrostatic attraction and chelation. DvH could rapidly reduce Sb(V) adsorbed on the cell surface and form amorphous nanometer-sized stibnite and/or antimony trioxide, respectively with sulfur and oxygen. Proteomic analysis indicated that some extracellular proteins involved in electron transfer increased significantly (p < 0.05) at 1.8 mM Sb(V). The upregulated flavoproteins could serve as a redox shuttle to transfer electrons from c-type cytochrome networks to reduce Sb(V). Also, the upregulated extracellular proteins involved in sulfur reduction, amino acid transport and protein synthesis processes, and the downregulated flagellar proteins would contribute to a better adaption under 1.8 mM Sb(V). This study advances our understanding of how microbial extracellular proteins promote Sb biomineralization in DvH.

Fabrication of Sb3+sensor based on 1,1′-(-(naphthalene-2,3-diylbis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol)/nafion/glassy carbon electrode assembly by electrochemical approach

A new Schiff base named 1,1′-(-(naphthalene-2,3-diylbis(azanylylidene))bis(methanylylidene))bis(naphthalen-2-ol) (NDNA) was synthesized by condensation reaction and then characterized by spectroscopic techniques for structure elucidation.

Determination of antimony compounds in waters and juices using ion chromatography-inductively coupled plasma mass spectrometry

A method was developed by coupling ion chromatography (IC) and inductively coupled plasma mass spectrometry (ICP-MS) for the speciation of antimony. In this study, antimony species such as antimonite [Sb(III)], antimonate [Sb(V)] and trimethyl antimony(V) (TMeSb) were separated in less than 8min using anion exchange chromatography with a Hamilton PRP-X100 column as the stationary phase. Mobile phase A was 20mmolL^-1 ethylenediaminetetraacetic acid (EDTA), 2mmolL^-1 potassium hydrogen phthalate (KHP) in 1% v/v methanol (pH 5.5) and 20mmolL^-1 EDTA, 2mmolL^-1 KHP, 40mmolL^-1 (NH₄)₂CO₃ in 1% v/v methanol (pH 9.0) formed mobile phase B. Detection limits and relative standard deviations (RSD) were 0.012-0.032ngmL^-1 and 2.2-2.8% respectively. This method was applied to bottled waters and fruit juices purchased in Kaohsiung, Taiwan. In water samples, Sb(V) was the major species where as in juices organometallic Sb species were also present.

Arsenic Exposure in Children through Drinking Water in Different Districts of Sindh, Pakistan

A cross sectional study has been conducted during 2007-2010 for the assessment of arsenic (As) contamination in drinking water, and its impact on the health of local public belongs to five districts of Sindh, Pakistan. The toxic risk assessment of As in different areas of Sindh province based upon its concentration in drinking water and scalp hair of boys and girls of age group 5-10 and 11-15 years. The total and inorganic As species in drinking water samples of four districts Hyderabad, Sukkur, Naushehro Firoze, Nawab shah, and Dadu were determined by advance pre-concentration methodologies. The resulting data indicated that the dominant inorganic As species in municipal treated (Hyaderabad) and hand pumps (Sukkur, Naushehro Firoze, Nawab shah and Dadu) water samples were arsenate (As(V)) and arsenite (As(III)), respectively. The total As concentrations in hand pumps water samples of Dadu district were 6.0- to 35-fold higher than the World Health Organization permissible limit of (10 μg/L) for drinking water. Whereas, total As in hand pump water samples of Sukkur, Naushehro Firoze, and Nawab shah were found in the range of 26.0-98.2, 18.0-50.6, and 52.3-85.2 μg/L, respectively. However, municipal treated water samples of Hyderabad were within recommended level (As <10 μg/L). The content of total As in children of both genders and age group belonging to Sukkur, Naushehro Firoze, Nawab shah, and Dadu was found to be significantly high as compared to those children residing in Hyderabad district. The Pearson coefficient of correlation r values between As levels in hand pump water and scalp hair samples of children belonging to Sukkur, Naushehro Firoze, Nawab shah, and Dadu were observed in the range of 0.65-0.75, 0.75-0.82, 0.80-0.90, and 0.95-0.98, respectively. The results of As toxicity risk assessment based on hazard quotient indicated that Dadu district has high carcinogenic exposure risk for children. Moreover, it is concluded that the children consuming groundwater of Sukkur, Naushehro Firoze, Nawab shah, and Dadu districts of Sindh, Pakistan were at risk of chronic As toxicity in future.

Simultaneous determination of copper, cobalt, and mercury ions in water samples by solid-phase extraction using carbon nanotube sponges as adsorbent after chelating with sodium diethyldithiocarbamate prior to high performance liquid chromatography

Recently, a sponge-like material called carbon nanotube sponges (CNT sponges) has drawn considerable attention because it can remove large-area oil, nanoparticles, and organic dyes from water. In this paper, the feasibility of CNT sponges as a novel solid-phase extraction (SPE) adsorbent for the enrichment and determination of heavy metal ions (Co(2+), Cu(2+), and Hg(2+)) was investigated for the first time. Sodium diethyldithiocarbamate (DDTC) was used as the chelating agent and high performance liquid chromatography (HPLC) for the final analysis. Important factors which may influence extraction efficiency of SPE were optimized, such as the kind and volume of eluent, volume of DDTC, sample pH, flow rate, etc. Under the optimized conditions, wide range of linearity (0.5-400 μg L(-1)), low limits of detection (0.089~0.690 μg L(-1); 0.018~0.138 μg), and good repeatability (1.27~3.60 %, n = 5) were obtained. The developed method was applied for the analysis of the three metal ions in real water samples, and satisfactory results were achieved. All of these findings demonstrated that CNT sponges will be a good choice for the enrichment and determination of target ions at trace levels in the future.

Arsenic, Antimony, Chromium, and Thallium Speciation in Water and Sediment Samples with the LC-ICP-MS Technique

Chemical speciation is a very important subject in the environmental protection, toxicology, and chemical analytics due to the fact that toxicity, availability, and reactivity of trace elements depend on the chemical forms in which these elements occur. Research on low analyte levels, particularly in complex matrix samples, requires more and more advanced and sophisticated analytical methods and techniques. The latest trends in this field concern the so-called hyphenated techniques. Arsenic, antimony, chromium, and (underestimated) thallium attract the closest attention of toxicologists and analysts. The properties of those elements depend on the oxidation state in which they occur. The aim of the following paper is to answer the question why the speciation analytics is so important. The paper also provides numerous examples of the hyphenated technique usage (e.g., the LC-ICP-MS application in the speciation analysis of chromium, antimony, arsenic, or thallium in water and bottom sediment samples). An important issue addressed is the preparation of environmental samples for speciation analysis.

Concentration and speciation of antimony and arsenic in soil profiles around the world's largest antimony metallurgical area in China

Mining and smelting activities contribute large amounts of heavy metal pollution to the environment. In this study, four 75- or 80-cm-deep soil profiles in the vicinity of the Xikuangshan Sb smelter were sampled and studied by combination of bulk chemical analysis, sequential extraction procedure, and speciation analysis of Sb and As, which are in order to assess the vertical mobility of metal/metalloid contaminants (Sb, As, Cd, and Hg). The heavy contamination in the soil profiles is mostly located in the uppermost soil layers enriched in organic matter (<40 cm) and exhibited downward migration in the soil profiles. Sb and As, being substantially bound in the exchangeable fractions by sequential extraction studies, showed significant mobility in the profiles. Sb(III), Sb(V), As(III), and As(V) were found in all of the soil samples, and certain methylated states of Sb (TMSb) and As (MMA, DMA) were also present in the lower layer soil samples.

Sb(V) reactivity with human blood components: redox effects

We assessed the reactivity of Sb(V) in human blood. Sb(V) reactivity was determined using an HPLC-HG-AFS hyphenated system. Sb(V) was partially reduced to Sb(III) in blood incubation experiments; however, Sb(III) was a highly unstable species. The addition of 0.1 mol L⁻¹ EDTA prevented Sb(III) oxidation, thus enabling the detection of the reduction of Sb(V) to Sb(III). The transformation of Sb(V) to Sb(III) in human whole blood was assessed because the reduction of Sb(V) in human blood may likely generate redox side effects. Our results indicate that glutathione was the reducing agent in this reaction and that Sb(V) significantly decreased the GSH/GSSG ratio from 0.32±0.09 to 0.07±0.03. Moreover, the presence of 200 ng mL⁻¹ of Sb(V) increased the activity of superoxide dismutase from 4.4±0.1 to 7.0±0.4 U mL⁻¹ and decreased the activity of glutathione peroxidase from 62±1 to 34±2 nmol min⁻¹ mL⁻¹.

Vortex-assisted surfactant-enhanced emulsification microextraction based on solidification of floating organic drop followed by electrothermal atomic absorption spectrometry for speciation of antimony (ΙΙΙ, V)

Vortex-assisted surfactant-enhanced emulsification microextraction based on solidification of floating organic drop (VASEME-SFO) was used for preconcentration and speciation of antimony (ΙΙΙ, V) followed by electrothermal atomic absorption spectrometry (ETAAS). In this procedure, Triton X-114 was used as emulsifier and 1-undecanol was used as extraction solvent. This method is based on the complexation of Sb(ΙΙΙ) with dithizone (as complexing agent) at pH 2 and extraction of the resulting hydrophobic complex into the extraction solvent (1-undecanol) with vortex-assisted liquid phase microextraction, whereas Sb(V) remained in solution. Sb(ΙΙΙ) in extraction solvent was directly analyzed by ETAAS after dilution with ethanol, and Sb(V) was calculated by subtracting Sb(ΙΙΙ) from the total antimony after reducing Sb(V) to Sb(ΙΙΙ) by L-cysteine. Under the optimized condition, the calibration curve was linear in the range of 0.4-8 μg L(-1) of Sb(ΙΙΙ) with a correlation coefficient of 0.9995. The detection limit based on three times of the standard deviation of the blank (n = 8) was 0.09 μg L(-1). The validation and the recovery of the proposed method were performed by the analysis of a certified reference material and spike method. The obtained results were in very good agreements with certified values. The proposed method was successfully applied for the determination of antimony species at trace levels in different water samples.

Sb(V) and Sb(III) distribution in human erythrocytes: speciation methodology and the influence of temperature, time and anticoagulants

In this research a new method was developed and optimized for the determination of Sb(V) and Sb(III) in human erythrocytes fractions (plasma and cytoplasm) by high performance liquid chromatography with hydride generation atomic fluorescence spectrometry. The method considers the first step of samples cleaning by protein precipitation by salting out followed by C18 solid phase extraction, EDTA elution, and finally a chromatographic separation by using anion exchange PRPX-100 (100 mm × 4.1mm) and EDTA 20 mmol L(-1) as mobile phase. The method was optimized by experimental design with a recovery of 90% for Sb(V) and 55-75% for Sb(III) approximately. The analytical method was applied to study the distribution of Sb(V) and Sb(III) in human erythrocytes considering temperature and time of incubations and with special attention about the influence of the anticoagulant. Results showed that both Sb(V) and Sb(III) are capable to enter the red blood cell in a proportion of approximately 40-60%. On the other hand, both species are then excreted from the interior of the cell, where the percentage considerably decreased from approximately 60 to less than 30% within the cell. An increase in the culture temperature increases the capacity of Sb(V) and Sb(III) to penetrate the membrane barrier and reach the cytoplasm. In order to preserve the original distribution of Sb in blood, heparin seems to be the best anticoagulant for sample preservation.

Application of hyphenated techniques in speciation analysis of arsenic, antimony, and thallium

Due to the fact that metals and metalloids have a strong impact on the environment, the methods of their determination and speciation have received special attention in recent years. Arsenic, antimony, and thallium are important examples of such toxic elements. Their speciation is especially important in the environmental and biomedical fields because of their toxicity, bioavailability, and reactivity. Recently, speciation analytics has been playing a unique role in the studies of biogeochemical cycles of chemical compounds, determination of toxicity and ecotoxicity of selected elements, quality control of food products, control of medicines and pharmaceutical products, technological process control, research on the impact of technological installation on the environment, examination of occupational exposure, and clinical analysis. Conventional methods are usually labor intensive, time consuming, and susceptible to interferences. The hyphenated techniques, in which separation method is coupled with multidimensional detectors, have become useful alternatives. The main advantages of those techniques consist in extremely low detection and quantification limits, insignificant interference, influence as well as high precision and repeatability of the determinations. In view of their importance, the present work overviews and discusses different hyphenated techniques used for arsenic, antimony, and thallium species analysis, in different clinical, environmental and food matrices.

H-point standard addition method applied to simultaneous kinetic determination of antimony(III) and antimony(V) by adsorptive linear sweep voltammetry

In this work, the applicability of H-point standard addition method (HPSAM) to the kinetic voltammetry data is verified. For this purpose, a procedure is described for the determination of Sb(III) and Sb(V) by adsorptive linear sweep voltammetry using pyrogallol as a complexing agent. The method is based on the differences between the rate of complexation of pyrogallol with Sb(V) and Sb(III) at pH 1.2. The results show that the H-point standard addition method is suitable for the speciation of antimony. Sb(III) and Sb(V) can be determined in the ranges of 0.003-0.120 and 0.010-0.240 microg mL(-1), respectively. Moreover, the solution is analyzed for any possible effects of foreign ions. The obtained results show that the HPSAM in combination to electroanalytical techniques is a powerful method with high sensitivity and selectivity. The procedure is successfully applied to the speciation of antimony in water samples.

Speciation and evaluation of Arsenic in surface water and groundwater samples: a multivariate case study

The principal object of the current study was to estimate total arsenic and its inorganic speciation in different origins of surface water (n=480) and groundwater (n=240) of Sindh, Pakistan. This study provided a description based on the evaluation of physico-chemical parameters of collected water samples and possible distribution of As with respect to its speciation. The concentration of total inorganic As (iAs) and its species (As(3+) and As(5+)) for the surface and underground water was reported in terms of basic statistical parameters, principal component analysis, cluster analysis, metal-to-metal correlations and linear regression analyses. The chemical correlations were observed by PCA, which were used to classify the samples by CA, based on the PCA scores. Standard addition method confirmed the accuracy; the recoveries of As(3+) and iAs were found to be >98%. The concentration of As(5+) in the water samples was calculated by the difference of the total inorganic arsenic and As(3+). The results revealed that the groundwater of the understudied area was more contaminated as compared to the surface water samples. The mean concentration of As(3+) and As(5+) in the surface water and groundwater samples were in the range 3.0 to 18.3 and 8.74-352 microg/L, respectively.

Cloud point extraction combined with electrothermal atomic absorption spectrometry for the speciation of antimony(III) and antimony(V) in food packaging materials

A simple, sensitive method for the speciation of inorganic antimony by cloud point extraction combined with electrothermal atomic absorption spectrometry (ETAAS) is presented and evaluated. The method based on the fact that formation of a hydrophobic complex of antimony(III) with ammonium pyrrolidine dithiocarbamate (APDC) at pH 5.0 and subsequently the hydrophobic complex enter into surfactant-rich phase, whereas antimony(V) remained in aqueous solutions. Antimony(III) in surfactant-rich phase was analyzed by ETAAS after dilution by 0.2 mL nitric acid in methanol (0.1M), and antimony(V) was calculated by subtracting antimony(III) from the total antimony after reducing antimony(V) to antimony(III) by l-cysteine. The main factors affecting the cloud point extraction, such as pH, concentration of APDC and Triton X-114, equilibrium temperature and incubation time, sample volume were investigated in detail. Under the optimum conditions, the detection limit (3 sigma) of the proposed method was 0.02 ng mL(-1) for antimony(III), and the relative standard deviation was 7.8% (c=1.0 ng mL(-1), n=7). The proposed method was successfully applied to speciation of inorganic antimony in the leaching solutions of different food packaging materials with satisfactory results.

Heat-treated Saccharomyces cerevisiae for antimony speciation and antimony(III) preconcentration in water samples

An analytical method was developed for antimony speciation and antimony(III) preconcentration in water samples. The method is based on the selective retention of Sb(III) by modified Saccharomyces cerevisiae in the presence of Sb(V). Heat, caustic and solvent pretreatments of the biomass were investigated to improve the kinetics and thermodynamics of Sb(III) uptake process at room temperature. Heating for 30 min at 80 degrees C was defined as the optimal treatment. Antimony accumulation by the cells was independent of pH (5-10) and ionic strength (0.01-0.1 mol L(-1)). 140 mg of yeast and 2h of contact were necessary to ensure quantitative sequestration of Sb(III) up to 750 microg L(-1). In these conditions, Sb(V) was not retained. Sb(V) was quantified in sorption supernatant by inductively coupled plasma mass spectrometry (ICP-MS) or inductively coupled plasma optical emission spectrometry (ICP-OES). Sb(III) was determined after elution with 40 mmol L(-1) thioglycolic acid at pH 10. A preconcentration factor close to nine was achieved for Sb(III) when 100mL of sample was processed. After preconcentration, the detection limits for Sb(III) and Sb(V) were 2 and 5 ng L(-1), respectively, using ICP-MS, 7 and 0.9 microg L(-1) using ICP-OES. The proposed method was successfully applied to the determination of Sb(III) and Sb(V) in spiked river and mineral water samples. The relative standard deviations (n=3) were in the 2-5% range at the tenth microg L(-1) level and less than 10% at the lowest Sb(III) and Sb(V) tested concentration (0.1 microg L(-1)). Corrected recoveries were in all cases close to 100%.

Optical Nanosensor Design with Uniform Pore Geometry and Large Particle Morphology

Appropriate design of nanosensors for optically selective, sensitive sensing systems is needed for naked-eye detection of pollutants for environmental cleanup of toxic heavy-metal ions. Mesostructured materials with two- or three-dimensional (2D or 3D) geometries and large particle morphologies show promise as probe carriers, and can therefore be used to reproducibly fabricate uniformly packed nanosensors. This is the first report on the effects of significant key properties of the mesostructured carriers, such as morphology, geometry, and pore shape, on the functionality of optical nanosensor designs. Such mesostructured sensors with superior physical characteristics can be used as components in sensing systems with excellent stability and sensitivity, and with rapid detection response. The nanosensor design can enhance the selectivity even at low concentrations of the pollutant target ions (nanomolar level). Among the nanosensors developed here, the large pore-surface grains of highly ordered 3D monoliths (HOM) exhibited a high adsorption capability of the Pyrogallol Red probe and high accessibility to analyte ion transport, leading to possible naked-eye detection of Sb(III) ions at concentrations as low as 10(-9) mol dm(-3) and at a wide detection range of 0.5 ppb to 3 ppm. A key finding in our study was that our mesostructured nanosensor designs retained highly efficient sensitivity without a significant increase in kinetic hindrance, despite the slight decrease of the specific activity of the electron acceptor/donor strength of the probe functional group after several regeneration/reuse cycles. The results, in general, indicate that large-scale reversibility of optical nanosensors is feasible in such metal-ion sensing systems.

A selective optical sensor for antimony based on hexagonal mesoporous structures

Mesostructured materials show promise in fabricating ordered sensing systems in a reproducible manner. Here, the fabrication of optically selective and sensitive sensors up to subnanomolar concentrations of Sb(III) ions was reported via simple and reproducible techniques in which the hexagonal mesoporous silicas in powder and monolith forms were used as probe carriers. Evidence of successful fabrication of the optical sensors was investigated by extensive characterizations using powder X-ray diffraction, nitrogen adsorption/desorption isotherms, 29Si NMR spectroscopy, and transmission electron microscopy. The mesostructured features allowed high adsorption capacity and accessibility of probe molecules and efficient transport of toxic species via much more direct and easier diffusion to the network sites without significant alteration of their physical characteristics, leading to excellent sensing systems in terms of stability and sensitivity with rapid response time of detection. In addition, the high performance of the hexagonal sensors was dependent on key factors such as the number of support-based sensors, the reaction temperature, and the pH value that led to possible naked-eye detection of Sb(III) ion concentration with a detection limit as low as 3x10(-9) mol/dm3 and a wide detection range of 1 ppb-2 ppm. Of particular interest was that our mesostructured sensor design provided control over the retention of the potential functionality of the naked-eye sensing system of Sb(III) ions upon the storage and even after several regeneration and reuse cycles, indicating large-scale reversibility of sensing systems.

Identification of Sb(V) Complexes in Biological and Food Matrixes and Their Stibine Formation Efficiency during Hydride Generation with ICPMS Detection

Several studies have described the synthetic preparation of Sb(V) complexes with organic ligands, but only recently was such a complex identified to exist in beverages stored in PET containers. In the present study, we have investigated by using HPLC-ICPMS and HPLC-ES-MS(/MS), the formation of Sb(V) complexes in various biological (urine) and food matrixes (yoghurt and juice) spiked with noncomplexed inorganic Sb(V). Our results show that Sb(V) complex formation is matrix dependent and that several Sb(V) complexes form to a considerable extent in these matrixes. The results also suggest that the existence of Sb(V) complexes in natural samples may have previously been overlooked due to analytical method limitations, mainly chromatographic, but also detection limitations when hydride generation is used. To overcome some of these limitations, we have developed chromatographic methods suitable for preserving Sb-organic ligand complexes during their separation. When applying this mild nondestructive chromatographic method, we were able to identify novel Sb complexes in yoghurt spiked with inorganic Sb(V), i.e., 1:1 Sb(V)-citrate, 1:1 Sb(V)-lactate, 1:2 Sb(V)-lactate, and other Sb(V)-lactate complexes. This is the first characterization of Sb(V)-lactate complexes. Detailed studies on the hydride generation (HG) efficiency of Sb(V) complexes showed that Sb(V) complexes of high stability, such as Sb(V)-citrate, Sb(V)-(adenosine)n and Sb(V)-(lactate)n (n = 1 or 2), are nondetectable by HG-ICPMS. Furthermore, Sb(V) complexes formed in natural biological and food matrixes were only partly detectable by HG-ICPMS, confirming limitations of analytical methods based on HG volatilization and subsequent stibine detection in natural samples containing complexing ligands with affinity toward Sb(V).