Targeted multidimensional gas chromatography for the quantitative analysis of suspected allergens in fragrance products

Multidimensional Gas Chromatography: Benefits and Considerations for Current and Prospective Users

Two-dimensional gas chromatography (GC×GC) offers improved separation power for complex samples containing hundreds to thousands of analytes. However, several considerations must be made to determine whether multidimensional gas chromatography (MDGC) is the logical instrument choice to answer a particular scientific question, including, but not limited to, whether the analysis is targeted or non-targeted, the number of analytes of interest, and the presence of interferences that are coeluted, as well as any potential regulatory or industrial constraints. Currently, MDGC remains daunting for many users because of data complexity and the limited tools commercially available, which are critical for improving the accessibility of MDGC. Herein, we discuss considerations that may assist analysts, laboratory managers, regulatory agents, instrument and software vendors, and those interested in understanding the applicability of 2D-GC for the scientific question being investigated.

Cryogenic trapping as a versatile approach for sample handling, enrichment and multidimensional analysis in gas chromatography

Cryogenic methods - those that employ cryogenic fluids/gases but also other approaches to generate reduced temperature - are versatile, functional and relatively easily implemented as part of a total gas chromatographic method. The general utility of a cold region is almost invariably as a trapping or focussing step, to collect analyte into a sharp zone. The success in effectively trapping analyte depends on analyte volatility and the temperature of the cold region. Analytes collection into a sorbent phase supported by cryotrapping usually provide a greater capacity trapping for the sorption step. Stripping analyte from a sample into a cryogenic trap, with subsequent introduction to GC as in a purge-and-trap method, sample introduction into an injector with incorporation of a cooling zone, manipulation and management of chromatographic bands during chromatography elution such as employed in multidimensional gas chromatography, and focussing analyte just prior to the detector, all have the same goal of concentrating the band, reducing its dispersion, and maximising response. This review summarises various approaches that demonstrate how cryogenic methods have been incorporated into gas chromatographic analysis.

Techniques and application in comprehensive multidimensional gas chromatography - mass spectrometry

In contrast to the well-known comprehensive two-dimensional gas chromatography (GC×GC) method, it is possible to define comprehensive multidimensional gas chromatography. 'Comprehensiveness' relates to analysis of the whole sample. Two-dimensional and multidimensional here refer to the use of at least two separation stages for analysis, however comprehensive 2DGC now appears to be reserved for the GC×GC method. This may be differentiated from comprehensive MDGC (CMDGC) simply by the analysis time assigned to the second (²D) column, although there does not appear to be a specific definition that relates to this analysis time parameter. A number of different implementation protocols for comprehensive MDGC are described here, that may involve either a single, or multiple, injection(s). In all cases, independent retention must be achieved on each dimension to ensure the probability of enhanced separation. An original application of a crude oil sample is presented to illustrate development of the MDGC approach that incorporates two Deans switches (DS) and a cryogenic trapping approach, performed using a sequential heart-cut (H/C) event method incremented by 0.5 min for each injection; a total of 40 injections is used to analyse the total sample. The higher peak capacity and consequently greater resolution on the long ²D column is illustrated, compared with that expected for conventional GC×GC, with tentative identification in order to classify chemical classes. Incorporating an approach to acquiring retention indices may be implemented, although its utility for petroleum hydrocarbons is limited. Structured groupings of different chemical classes, as exemplified by mono and diaromatics for the crude oil sample, were noted.

The Blossoming of Technology for the Analysis of Complex Aroma Bouquets-A Review on Flavour and Odorant Multidimensional and Comprehensive Gas Chromatography Applications

Multidimensional approaches in gas chromatography have been established as potent tools to (almost) attain fully resolved analyses. Flavours and odours are important application fields for these techniques since they include complex matrices, and are of interest for both scientific study and to consumers. This article is a review of the main research studies in the above theme, discussing the achievements and challenges that demonstrate a maturing of analytical separation technology.

Ultrasound-assisted emulsification microextraction coupled with high-performance liquid chromatography for the simultaneous determination of fragrance allergens in cosmetics and water

A simple, inexpensive, and environmentally friendly method based on ultrasound-assisted emulsification microextraction followed by solidification of floating organic drop and high-performance liquid chromatography coupled to diode array detection was developed for the simultaneous determination of 18 potentially allergenic fragrance substances. Several parameters affecting the microextraction process were investigated in detail by the "one-variable-at-a-time" approach. Optimal conditions were the following: 50 μL of 2-dodecanol as extraction solvent, 10 mL of sample containing 150 g/L of salt, and 5 min of sonication at 35°C. Under the optimized conditions, method showed good linearity in the selected ranges, with squared correlation coefficients ranging from 0.948 to 0.999. Limits of detection ranged from 0.001 to 0.154 μg/mL and enrichment factors from 9 to 237. Precision of the method, expressed as relative standard deviation, was checked at two levels obtaining good results (3.3-14.4%). Recovery studies were made in baby bath water and in eau de cologne showing acceptable accuracy. Finally, the developed method was successfully applied to different commercial cosmetic and water samples. The most commonly found analyte was linalool followed by cinnamal and lilial. Most of the analyzed samples contained at least one of the target compounds.

Recent advances in flow-controlled multidimensional gas chromatography

The continued development of flow-controlled two-dimensional gas chromatography (2-D GC) is reviewed, with a special emphasis on results published from 2001 through 2011. Heart-cutting 2-D GC continues to be used for isolating selected components in complex mixtures. The programmable and highly precise flows and temperatures produced by modern gas chromatographs have made it easier to selectively transfer analytes to the secondary column and to backflush unwanted components from the primary column. Several new Deans switch interfaces for performing heart-cutting 2-D GC have been introduced, with most attention given to devices that integrate the flow connections into a single unit. Heart-cutting 2-D GC has been used to isolate analytes in a wide variety of complex mixtures including fuels, industrial feedstocks, fragrances, and environmental extracts. Valve-based comprehensive 2-D GC (GC×GC) was also actively developed in the past decade. Valve-based modulation is a simple way to generate GC×GC separations without using cryogenic fluids. More than ten new valve-based modulators were introduced. Diaphragm valves fitted with sample loops are the most common low duty cycle modulators, whereas fluidic modulators that employ differential flow conditions are the most common high duty cycle modulators. Applications of valve-based GC×GC include analysis of hydrocarbon mixtures, essential oils, and environmental samples.

Fast screening of terpenes in fragrance-free cosmetics by fluorescence quenching on a fluorescein-bovine serum albumin probe confined in a drop

A headspace single drop microextraction procedure is proposed for terpene screening in fragrance-free cosmetics. The drop is composed by an aqueous solution of a fluorescence probe formed by bovine serum albumin and fluorescein. Extracted volatile terpenes produce a fluorescence quenching that can be monitored by microvolume-fluorospectrometry. This quenching is observed on the fluorescein fluorescence only when it is linked to bovine serum albumin. A mechanism of contact quenching is proposed. Variables related to the terpene microextraction procedure were carefully studied, namely drop composition and volume, microextraction time, sample volume and temperature, stirring rate and salt addition. The only sample treatment is the dilution of cosmetic with 40% (v/v) ethanol. Citronellol was selected as a representative terpene for calibration purposes. According to the European legislation, the probability-concentration graph of the screening system was established using 0.001% (w/w) as the cut-off level. Low limits of detection with simple instrumentation, absence of matrix effects and high sample throughput can be emphasized.

Multicomponent analytical methodology to control phthalates, synthetic musks, fragrance allergens and preservatives in perfumes

A simple, fast, robust and reliable multicomponent analytical method applicable in control laboratories with a high throughput level has been developed to analyze commercial brands of perfumes. Contents of 52 cosmetic ingredients belonging to different chemical families can be determined in a single run. Instrumental linearity, precision of the method and recovery studies in real samples showed excellent results, so that quantification by external calibration can be effectively applied. Relevant limits of detection and quantification were obtained for all the targets considered, far below the legal requirements and amply adequate for its accurate analytical control. A survey of 70 commercial perfumes and colognes has been performed, in order to verify whether these products complied with the recent changes in European legislation: regarding the maxima allowed concentrations of the ingredients and/or ingredient labelling. All samples contained some of the target ingredients. Several samples do not comply with the regulations concerning the presence of phthalates. Musks data confirmed the trend about the replacement of nitromusks by polycyclic musks; as well as the noticeable introduction of macrocyclic musks in the perfumes composition. The prohibited musk moskene has been detected in one sample in an appreciable concentration. The average number of fragrance allergens is twelve per sample; their presence must be indicated in the list of ingredients when its concentration exceeds the 0.001%, but values higher than 1% have been found in some samples. Preservatives data show that parabens, although ubiquitous in other cosmetic products, are not widely used in perfumery. In contrast, the presence of BHT is indeed widespread. The degree of compliance with the European Regulation on the labelling has been evaluated in a subset of samples, and only about the 38% of the perfumes were properly labelled for the allergens tested.

Pressure-adjusted continual flow heart-cutting for the high throughput determination of amphetamine-type stimulant drugs in whole blood by fast multidimensional gas chromatography–mass spectrometry

Innovative features and technical improvements in modern bench-top quadrupole gas chromatograph-mass spectrometer (GC-MS) have prepared the way for faster and more cost-effective applications while still maintaining sufficient chromatographic resolution, speed of MS data acquisition and reliability of analytical methodology. In this paper, a short wide-bore capillary column with low film thickness (5 m x 0.32 mm i.d., 0.1 microm) was used a pre-fractionating column and only chosen heart-cuts were transferred to the second chromatographic dimension (15 m x 0.25 mm i.d., 0.25 microm) by means of a pressure-adjusted continual flow type switching device for quantification of five common amphetamine-type stimulant drugs. The instrumental setting used, in combination with carefully optimized operational fast GC and MS parameters, markedly decreased the retention times of the targeted analytes, e.g., amphetamine 0.891 min and methamphetamine 1.037 min, and the total chromatographic runtime (1.700 min), as well as reducing the need for continuous cleaning of the MS ion source and increasing column life compared with conventional GC-MS approaches. The performance of the instrumental configuration and analytical method was evaluated in validation experiments and the method was also applied to authentic samples. The method demonstrates the potential of fast GC-MS in combination with a gas-phase microfluidic Deans switch device for analysing of (semi)volatile compounds, such as amphetamine-type stimulant (ATS) drugs. This should be particularly useful in modern laboratories aiming at cost-efficient analysis as well as the optimum use of available laboratory capacity and instrumentation.