Ruggedness and robustness testing

Advanced Computational Techniques for Plasmonic Metasurfaces in the Detection of Neglected Infectious Diseases

This tutorial delves into the integration of plasmonic metasurfaces as cutting-edge tools for creating highly sensitive diagnostic assays tailored to neglected infectious diseases. Plasmonic metasurfaces provide a transformative approach to diagnostics by addressing common limitations of traditional methods, including slow results and high costs. This tutorial explores their application in advancing sensitive and cost-effective solutions for neglected infectious diseases. This manuscript covers the complete cycle of developing optimized, AI-driven plasmonic metasurfaces, from biofunctionalization strategies and advanced fabrication techniques to addressing scalability, regulatory challenges, and point-of-care accessibility in resource-limited settings.

Modified Nucleosides as Potential Biomarkers of Prostate Cancer: Targeted Metabolomics of In Vitro Cell Samples by MEKC-UV

Prostate cancer is the second most common cancer among men globally, with over 1.4 million new cases and nearly 400000 deaths reported in 2022. Despite the availability of diagnostic tools such as the Prostate Specific Antigen (PSA) test, its low sensitivity reinforces the need for the exploration of more reliable biomarkers. In this context, metabolomics offers a promising approach for identifying sensitive biomarkers to improve cancer diagnosis and treatment. Therefore, this study aimed to conduct a targeted metabolomic analysis of the extracellular environment of In Vitro non-tumoral and cancer prostate cells to compare the levels of eight nucleosides using micellar electrokinetic capillary chromatography with UV detection (MEKC-UV). The method was adapted from a previously optimized protocol for blood serum, with minor adjustments to meet the Brazilian National Health Surveillance Agency (ANVISA) standards. Nucleosides were extracted via solid-phase extraction (SPE), and cell cultures were maintained under controlled conditions at 37°C with 5% CO2 until reaching 80% confluence. The optimized MEKC-UV method demonstrated precision and accuracy, although the Youden test indicated some lack of robustness. Statistical analysis using a two-tailed t-test revealed significantly higher adenosine levels in non-tumoral cells, whereas uridine and 5-methyluridine concentrations were elevated in cancer cells. Inosine was detected exclusively in the non-tumoral cell line. Nevertheless, the method's innovative and cost-effective nature underscores its potential as a tool for cancer biomarker identification, with distinct nucleoside patterns in cancer cells offering valuable insights for disease recognition.

ICH Q14-inspired novel approach to establish an SFC-based purity method for carbamazepine

The proposed ICH Q14 guideline "Analytical procedure development" describes science and risk-based approaches for development and maintenance of analytical procedures suitable for the assessment of the quality of drug substances and drug products. As a case study, the systematic development and validation of a supercritical fluid chromatography (SFC)-based purity method for carbamazepine is presented. Systematic analytical quality by design (AQbD) principles were applied using the software package Fusion QbD to the method development approach. The relationship between chromatographic parameters and the responses of interest were examined to improve the reliability of the method by understanding, reducing, and controlling sources of variability. Method performance qualification in terms of method robustness was finally carried out with the parameters that were classified as critical after method development and a validation study met previously set acceptance criteria. The developed SFC purity method for carbamazepine demonstrated readiness as a viable alternative to the official HPLC method published in the Ph.Eur. with improved peak resolution, improved peak symmetry, and faster analysis times (3 min vs. 80 min for the official method). Its inherent reliability illustrates the superiority of AQbD in method development and application for drug quality assurance.

Development and validation of high-performance liquid chromatography method for determination of clarithromycin in pharmaceutical tablets

Clarithromycin is a very important macrolide antibiotic used to treat bacterial infections in human and veterinary medicine. This study reports the development and validation of cost-effective, simple, precise, accurate, and robust high-performance liquid chromatography (HPLC) for the determination of clarithromycin (CLA) in tablets. Reversed-phase chromatography was conducted using a standard column at 55°C with ultraviolet detection at 215 nm. A mobile phase consisting of acetonitrile -2-methyl-2-propanol -potassium phosphate buffer was used at a flow rate of 1.0 mL/min. The proposed method displayed good linearity, precision, accuracy, robustness, and specificity. The present HPLC was compared with capillary electrophoresis and bioassay methods and the results indicated that there was no significant difference between these methods. Moreover, the obtained results demonstrated the validity of the isocratic HPLC, which allows reliable quantitation of CLA in pharmaceutical samples. Thus, it can be used as a substitute alternative methodology for the routine quality control of this medicine, in situations where other methods are less accessible in the laboratory.

Simultaneous Determination of Posaconazole and Hemp Seed Oil in Nanomicelles through RP-HPLC via a Quality-by-Design Approach

The present study involves the development of a reverse-phase HPLC method employing the quality-by-design methodology for the estimation of posaconazole and hemp seed oil simultaneously in nanomicelles formulation. The successful separation of posaconazole and hemp seed oil was achieved together, and this is the first study to develop and quantify posaconazole and hemp seed oil nanomicelles with linoleic acid as the internal standard and developed a dual drug analytical method employing a quality-by-design approach. The study was performed on a Shimadzu Prominence-I LC-2030C 3D Plus HPLC system with a PDA detector and the Shim-pack Solar C8 column (250 mm × 4.6 mm × 5 μm) for analysis with a mobile phase ratio of methanol:water (80:20% v/v) maintaining the flow rate of 1.0 mL/min. The final wavelength was selected as 240 nm and the elution of hemp seed oil and posaconazole was obtained at 2.7 and 4.6 min, respectively, with a maximum run time of 8.0 min. Box Behnken design was employed to optimize the method, keeping the retention time, peak area, and theoretical plates as dependent variables, while the mobile phase composition, flow rate, and wavelengths were chosen as independent variables. Parameters such as specificity, accuracy, robustness, linearity, sensitivity, precision, ruggedness, and forced degradation study were performed to validate the method. The calibration curves of posaconazole and hemp seed oil were determined to be linear throughout the range for concentration. The suggested approach can be effectively utilized for estimating the content of drugs from their nanoformulation and proved suitable for both in vivo and in vitro research.

A one-step solid-phase extraction with UHPLC-MS/MS for fast and accurate determination of multi-class veterinary drugs in animal muscles

Excessive use of veterinary drugs in livestock growth poses a threat to food safety. It is, however, challenging to quantify these multi-class veterinary drugs within animal muscles, because of their varied physicochemical properties. In this work, we presented a simple, efficient and sensitive method for the simultaneous determination of multi-class veterinary drugs with ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). The method involves a highly efficient extraction using a EDTA (pH 7)-ACN (30:70, v/v) solvent system, followed by a one-step solid-phase extraction cleanup approach with PRiME HLB sorbent (Reversed-phase N-vinylpyrrolidone and divinylbenzene copolymer). For all the analytes, over a wide range of polarity, satisfactory recoveries were obtained between 70% and 120%, with relative standard deviations <15%. Excellent sensitivities were achieved with the limits of quantification ranging from 0.2 μg/kg to 3.0 μg/kg. This developed method provides a new targeted strategy for the analysis of multi-class veterinary drugs in muscle matrices.

Residual behavior and dietary risk assessment of albendazole as fungicide in citrus orchards

Albendazole is a broad-spectrum fungicide that shows great potential in controlling fungal diseases in citrus. To quantify the dissipation behavior, residue distribution, and dietary risk of albendazole in citrus, we developed an UPLC-MS/MS analysis protocol. The average recovery rate of albendazole in whole citrus and citrus pulp ranged from 74 to 105% with an RSD of 3 to 8%, and a limit of quantification of 0.01 mg kg^-1. The degradation half-lives were 2.8-3.0 and 5.7-17.0 days in whole citrus and citrus pulp, respectively, and the final residues of albendazole were <0.059 mg kg^-1 with a risk quotient of <1. This study not only demonstrates that the dietary risk of albendazole in citrus is negligible, but also provides empirical data to establish the maximum residual limit (MRL) for the safe application of albendazole in citrus orchards to meet the requirements for food safety as well as international trade.

Quality by Design (QbD) Based Method for Estimation of Xanthohumol in Bulk and Solid Lipid Nanoparticles and Validation

The analytical quality by design (AQbD) approach is utilized for developing and validating the simple, sensitive, cost-effective reverse-phase high performance liquid chromatographic method for the estimation of xanthohumol (XH) in bulk and nanoformulations. The Box-Behnken design (BBD) is applied for method optimization. The mobile phase ratio, pH and flow rate were selected as independent variables, whereas retention time, peak area, peak height, tailing factor, and theoretical plates were selected as dependent variables. The chromatogram of XH obtained under optimized conditions has given optimum conditions such as retention time (5.392 min), peak area (1,226,737 mAU), peak height (90,121 AU), tailing factor (0.991) and theoretical plates (4446.667), which are contoured in the predicted values shown by BBD. Validation of the method has been performed according to ICH Q2(R1) recommendations, using optimized conditions for linearity, limit of detection (LOD) and limit of quantification (LOQ), accuracy, precision, robustness and system suitability. All the values of validation parameters lie within the acceptable limits prescribed by ICH. Therefore, the developed and validated method of XH by the AQbD approach can be applied for the estimation of XH in bulk and various nanoformulations.

Quality by Design Based Formulation of Xanthohumol Loaded Solid Lipid Nanoparticles with Improved Bioavailability and Anticancer Effect against PC-3 Cells

Many natural products with greater therapeutic efficacy are limited to target several chronic diseases such as cancer, diabetes, and neurodegenerative diseases. Among the natural products from hops, i.e., Xanthohumol (XH), is a prenylated chalcone. The present research work focuses on the enhancement of the poor oral bioavailability and weak pharmacokinetic profile of XH. We exemplified the development of a Xanthohumol-loaded solid lipid nanoparticles (XH-SLNs) cargo system to overcome the limitations associated with its bioavailability. The XH-SLNs were prepared by a high-shear homogenization/ultrasonication method and graphical, numerical optimization was performed by using Box-Behnken Design. Optimized XH-SLNs showed PS (108.60 nm), PDI (0.22), ZP (-12.70 mV), %EE (80.20%) and an amorphous nature that was confirmed by DSC and PXRD. FE-SEM and HRTEM revealed the spherical morphology of XH-SLNs. The results of release studies were found to be 9.40% in 12 h for naive XH, whereas only 28.42% of XH was released from XH-SLNs. The slow release of drugs may be due to immobilization of XH in the lipid matrix. In vivo pharmacokinetic study was performed for the developed XH-SLNs to verify the enhancement in the bioavailability of XH than naive XH. The enhancement in the bioavailability of the XH was confirmed from an increase in Cmax (1.07-folds), AUC0-t (4.70-folds), t1/2 (6.47-folds) and MRT (6.13-folds) after loading into SLNs. The relative bioavailability of XH loaded in SLNs and naive XH was found to be 4791% and 20.80%, respectively. The cytotoxicity study of naive XH, XH-SLNs were performed using PC-3 cell lines by taking camptothecin as positive control. The results of cytotoxicity study revealed that XH-SLNs showed good cell inhibition in a sustained pattern. This work successfully demonstrated formulation of XH-SLNs with sustained release profile and improved oral bioavailability of XH with good anticancer properties against PC-3 cells.

Analytical Quality by Design (AQbD) Approach to the Development of Analytical Procedures for Medicinal Plants

Scientific regulatory systems with suitable analytical methods for monitoring quality, safety, and efficacy are essential in medicinal plant drug discovery. There have been only few attempts to adopt the analytical quality by design (AQbD) strategy in medicinal plants analysis over the last few years. AQbD is a holistic method and development approach that understands analytical procedure, from risk assessment to lifecycle management. The enhanced AQbD approach reduces the time and effort necessary to develop reliable analytical methods, leads to flexible change control through the method operable design region (MODR), and lowers the out-of-specification (OOS) results. However, it is difficult to follow all the AQbD workflow steps in the field of medicinal plants analysis, such as defining the analytical target profiles (ATPs), identifying critical analytical procedure parameters (CAPPs), among others, because the complexity of chemical and biological properties in medicinal plants acts as a barrier. In this review, various applications of AQbD to medicinal plant analytical procedures are discussed. Unlike the analysis of a single compound, medicinal plant analysis is characterized by analyzing multiple components contained in biological materials, so it will be summarized by focusing on the following points: Analytical methods showing correlations within analysis parameters for the specific medicinal plant analysis, plant raw material diversity, one or more analysis targets defined for multiple phytochemicals, key analysis attributes, and analysis control strategies. In addition, the opportunities available through the use of design-based quality management techniques and the challenges that coexist are also discussed.

Development and Validation of a Simple, Selective, and Accurate Reversed-Phase Liquid Chromatographic Method with Diode Array Detection (RP-HPLC/DAD) for the Simultaneous Analysis of 18 Free Amino Acids in Topical Formulations

Even though there are reported methods for the quantification of free amino acids (FAAs) in biological products, no work has been done on the analysis of these substances in formulations. Moreover, further research is required as the reported methods do not fulfill analytical method requirements. The objective of this study was, therefore, to develop and validate a rapid, reliable, and appropriate RP-HPLC/DAD method for the simultaneous determination of 18 FAAs (l-Ala, l-Arg, l-Asn, l-Asp, l-Gln, l-Glu, l-Gly, l-His, l-Ile, l-Lue, l-Lys, l-Met, l-Orn, l-Phe, l-Pro, l-Ser, l-Thr, and l-Val) in topical formulations. After appropriate method development, the technique was validated for selectivity, linearity and range, limit of detection, limit of quantification, precision, and accuracy. The samples were derivatized with 9-fluorenylmethyl chloroformate (Fmoc-Cl). Chromatographic separation was performed on InfinityLab Poroshell 120 E.C 18 (3 × 50) mm, 2.7 μm column at 25 °C. The mobile phase consisting of water and acetonitrile adjusted to appropriate pH was pumped in gradient mode at a flow rate of 0.7 mL/min. Ten microliters were injected and analyte detection was conducted using a DAD. The results indicate that the method was selective for these FAAs. It was linear over the concentration range of 5–80 µM with a correlation coefficient greater than 0.995. Moreover, it was sensitive, precise, accurate, and robust. All the reported drawbacks of RP-HPLC-based analysis of FAAs were resolved, and hence, this new method can be considered appropriate for the analysis of these FAAs in topical formulations.

A validated new RP-HPLC method for simultaneous determination of amoxicillin, ampicillin and cloxacillin in pharmaceutical formulations

As per the World Health Organization, 10% of medicines in low- and middle-income nations are of poor quality and pose a huge public health risk. The development and implementation of cost-effective, efficient and quick analytical methods to control the quality of these medicines is one of the immediate strategies to avoid such a situation. Hence, the main goal of this study was to develop and validate a simple, specific and precise new RP–HPLC method for simultaneous analysis of amoxicillin, ampicillin and cloxacillin in pharmaceutical formulations. The chromatographic analysis was achieved using Shodex C18 (250 × 4.6 mm, 5 μm) column with UV detection at 225 nm. The mobile phase was a gradient mixture of 30 mM phosphate buffer, pH 4.0 (mobile phase A) and acetonitrile (mobile phase B). Efficient separation of the three drugs was obtained using the final optimized chromatographic conditions. The developed method was validated for its specificity, linearity, precision, accuracy and robustness as per the ICH guidelines. The validation results showed that the method was specific, linear, precise, accurate and robust for the simultaneous determination of the three drugs. The developed method was applied to determine the content of the three drugs in pharmaceutical formulations. The assay results of the preparations showed that their drug content was within the pharmacopeial limit stipulated for each drug product. It can be concluded that the proposed method is suitable for simultaneous determination of amoxicillin, ampicillin and cloxacillin in pharmaceutical formulations in industries and regulatory laboratories.

Rapid analytical method development and validation for the simultaneous estimation of 5-Fluorouracil and Cannabidiol in plasma and lipid-based nanoformulations

Background:

5-Fluorouracil (5-FU) is a well-established anticancer drug. Several studies have also demonstrated the anticancer potential of Cannabidiol (CBD) against various malignancies, including skin cancer. Reported synergistic effects of this combination fascinate researchers to consider this for the management of skin cancer.

Methods:

A simple and robust HPLC method for simultaneous estimation of 5-FU and CBD at its single wavelength (237 nm) was developed and validated. The separation of these compounds was performed on Waters® HPLC system with Hypersil™ C18 RP-column using methanol and water in gradient flow as mobile phase. The method could effectively quantify the nanogram levels of both analytes simultaneously in plasma spiked samples and various nanoformulations. The analytical performance of the proposed method was validated in terms of various parameters, such as linearity, ruggedness, specificity, and few others.

Results:

5-FU as well as CBD were successfully detected at 237 nm with retention time 1.4 and 1.84 minutes respectively. Calibration curves were found to be linear with R2 values of 0.985 and 0.984 for 5-FU and CBD respectively. The method was linear, precise, specific and robust. Additionally, prepared method successfully employed in determining concentration of both drugs in combitorial nanoformulations.

Conclusion:

The findings show that the developed method was simple, reliable, sensitive and economical. It could be employed for the simultaneous estimation of 5-FU and CBD in various in vitro and in vivo studies.

Development and validation of liquid chromatography method for simultaneous determination of multiclass seven antibiotic residues in chicken tissues

BACKGROUND

Antibiotics are routinely used on poultry for therapy and prevention of diseases and to enhance animal growth. The objective of this study was to develop and validate a sensitive and reliable liquid chromatography with UV detection (LC-UV) method for the simultaneous determination of seven multiclass antibiotic residues (amoxicillin, ampicillin, penicillin, sulfamethoxazole, gentamicin, ciprofloxacin, and erythromycin) in chicken tissues.

METHODS

The liquid chromatography method with UV detection was optimized for complete separation of the seven selected antibiotic compounds with reversed phase and isocratic elution using Hypersil BDS-C18 (3 µm, 100 mm × 4 mm) column. The mobile phase consisted a ratio of 0.05 M Na2HPO4, acetonitrile and methanol (70:10:20), at UV absorption wavelength of 230 nm. The column thermostat was set at 40 °C, the mobile phase flow rate was 1 mL min-1, and the injection volume was 20 μL.

RESULTS

All the seven standard compounds were eluted within 14 min. The results for: linearity, precision, sensitivity, accuracy, specificity, decision limit (CCα), detection capability (CCβ), suitability and method robustness were validated according to the criteria of Commission Decision 2002/657/EC guidelines. Calibration plot correlation coefficients ranged from 0.9983 to 0.9998 and the percent relative standard deviations for repeated analysis were below 5% indicating acceptable method precision. The limits of detection (LODs) and quantification (LOQs) ranged from 0.098-0.255 μg kg-1 to 0.297-0.574 μg kg-1, respectively. The accuracy study yielded recoveries in the ranges 98.1-107% for the pure compounds and 94.0-102% for the spiked drug free chicken tissue samples.

CONCLUSIONS

The method was found to be appropriate for simultaneous determination of five different classes of seven antibiotic residues in chicken tissues. Furthermore, this is the first instance for the simultaneous determination of seven multiclass, multi-residues analysis using LC-UV from chicken tissue samples. This is a cost-effective and alternative method with simple instrumentation approach for laboratories that lack highly specialized state-of-the-art instrumentation.

Reverse phase-liquid chromatography assisted protocol for simultaneous determination of lamivudine and tenofovir disoproxil fumarate in combined medication used to control HIV infection: an investigative approach

Background

Human immunodeficiency virus (HIV) causes severe life-threatening condition, i.e., AIDS. HIV destabilises an individual’s ability to prevent infection. Therefore, the combine medication lamivudine (LVD) and tenofovir disoproxil fumarate (TDF) are prescribed to suppress the amount of HIV infection in individual’s body; thus, the individual’s immune system could function properly. Consequently, the objective of present research work was to investigate robust and sensitive liquid chromatography avenue for simultaneous determination of lamivudine and tenofovir disoproxil fumarate in pure material and combined dosage form.

Results

The reversed-phase chromatographic separation has been performed through Hypersil BDS C18 column using solvent system composed of 10 mM potassium dihydrogen phosphate (pH 4.0): acetonitrile (60:40% v/v). The determination was executed at 30 oC at 1 mL/min rate for flow of solvent system through column. The eluents of column were monitored at 265 nm using Photodiode Array detector has revealed admirable retention times, i.e., 4.67 and 8.78 min for both drugs, respectively. The calibration curve demonstrated excellent linearity in the range of 10–50 μg/mL for lamivudine and tenofovir disoproxil fumarate with better determination coefficients was more than (r2 0.999).

Conclusion

The estimable method was effectively validated with respect to accuracy, precision, sensitive (limit of detection and limit of quantitation), robustness, ruggedness, and for selectivity and specificity. The value less than 2 for percentage relative standard deviation for accuracy, precision, robustness, and ruggedness satisfying the acceptance criteria as per procedure of International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use.

ROTADIAL: The first nanobody-based immunoassay to detect Group A Rotavirus

ROTADIAL is a rapid nanobody (Nb)-based ELISA assay able to identify Rotavirus group A (RVA) in feces from pediatric patients. The assay is based on a sandwich of two patented llama-derived Nbs directed to the inner capsid viral protein VP6 from RVA. Nbs are directed to conformational epitopes of VP6 and recognized all human RVA strains tested, representing ideal reagents for their use in immunodiagnostic tests for RVA detection. All the steps are carried out at room temperature, bringing results in less than two hours. This assay, named ROTADIAL, was validated with a reference panel of feces from pediatric patients from Argentina. The overall sensitivity and specificity of the ROTADIAL test, when compared to a commercial test, was 100 % (100/100) and 99 % (99/100) respectively. ROTADIAL presented optimal analytical performance, being capable of detecting RVA regardless of the presence of other common human enteric infectious agents and is the first RVA-diagnostic assay developed using Nbs, worldwide.

Developing a Validated HPLC Method for Quantification of Ceftazidime Employing Analytical Quality by Design and Monte Carlo Simulations

BACKGROUND

Ceftazidime, a third-generation cephalosporin, is widely used in the treatment of lung infections, often given as "off-label" nebulization. There is a need to develop a sensitive and robust analytical method to compute aerodynamic properties of ceftazidime following nebulization.

OBJECTIVE

The current study entails development of a simple, accurate, and sensitive HPLC method for ceftazidime estimation, employing the principles of analytical quality-by-design (AQbD) and Monte Carlo simulations.

METHOD

Selection of critical material attributes (CMAs) affecting method performance was accomplished by factor screening exercises. Subsequently, the influential CMAs, i.e., mobile phase ratio and flow rate, were systemically optimized using a face-centered cubic design for the chosen critical analytical attributes (CAAs). The factor relationship(s) between CMAs and CAAs was explored employing a 3 D-response surface and 2 D-contour plots, followed by numerical as well as graphical optimization, for establishing the optimal chromatographic conditions. The obtained method operable design region was validated by Monte Carlo simulations for defect rate analysis.

RESULTS

The optimized HPLC conditions for estimating ceftazidime were acetonitrile to acetic acid solution (75:25) as mobile phase at a flow rate of 0.7 mL/min, leading to Rt of 4.5 min and peak tailing ≤2. Validation studies, as per International Conference on Harmonization Q2(R1) guidance, demonstrated high sensitivity, accuracy, and efficiency of the developed analytical method with an LOD of 0.075 and LOQ of 0.227 µg/mL. Application of this chromatographic method was extrapolated for determining aerodynamic performance by nebulizing ceftazidime at a flow rate of 15 L/min using a next-generation impactor. The study indicated superior performance, sensitivity, and specificity of the developed analytical system for quantifying ceftazidime.

CONCLUSIONS

Application of an AQbD approach, coupled with Monte Carlo simulations, aided in developing a robust HPLC method for estimationof ceftazidime per se and on various stages of impactor.

HIGHLIGHTS

(i) QbD-enabled development of robust RP-HPLC method for ceftazidime quantification, (ii) Analytical method optimization employing Risk Assessment and Design of Experiments, (iii) Design space verification and defect rate analysis using Monte Carlo simulations, (iv) Chromatographic method validation as per ICH Q2 R1 guidelines and (v) Quantitative estimation of ceftazidime on various stages of impactor.

Essential oil-based dispersive liquid-liquid microextraction for the determination of N,N-dimethyltryptamine and β-carbolines in human plasma: A novel solvent-free alternative

The present study describes the development of a novel solvent-free vortex-assisted dispersive liquid-liquid microextraction alternative based on a natural essential oil as extracting solvent (VA-EO-DLLME) for the determination of N,N-dimethyltryptamine (DMT), harmine (HRM), harmaline (HRL) and tetrahydroarmine (THH) (compounds found in the ayahuasca tea, a psychedelic plant preparation) in human plasma. After optimization through full factorial and Box-Behnken experimental designs, this VA-EO-DLLME followed by ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) was completely validated and applied to authentic plasma specimens. Sample preparation consisted in the addition of 60 mg of NaCl, 100 μL of borate buffer and 100 μL of Eucalyptus globulus essential oil to a 200 μL aliquot of human plasma. After 30 s of vortex agitation followed by 5 min of centrifugation (10,000 rpm), 80 μL of the oil supernatant was dried and resuspended in mobile phase prior to injection into the UHPLC-MS/MS system. Once optimized, the validated method yielded LoDs ≤1.0 ng mL^-1 for all analytes. LoQ was 1.0 ng mL^-1 for DMT, HRL and HRM and 2.0 ng mL^-1 for THH. The method has shown to be linear over the range of LoQ up to 150 ng mL^-1 (r² ≥ 0.9926). Intra/inter-day precision and accuracy met the acceptance criteria at three quality control (QC) levels. An additional intermediate precision study demonstrated that, except for THH and HRL at low and medium QCs, the overall method performance was similar for the three different oil sources. Matrix effect evaluation showed predominant ion suppression, ranging from 56% to 83%. Recovery varied from 33 up to 101% with an average of 50 ± 15.8%. Selectivity studies showed no interferences. Analysis of 13 authentic samples proved method feasibility. Finally, we believe that our novel VA-EO-DLLME approach offers a very simple, fast, cost-effective and eco-friendly alternative based on the use of an easily accessible and entirely green material as an extracting solvent. This may represent an incentive for researchers to investigate novel and creative alternatives, such as essential oils, as substitutes of organic solvents for microextraction methods in forensic and clinical contexts.

Experimental design in HPLC separation of pharmaceuticals

Design of Experiments (DoE) is an indispensable tool in contemporary drug analysis as it simultaneously balances a number of chromatographic parameters to ensure optimal separation in High Pressure Liquid Chromatography (HPLC). This manuscript briefly outlines the theoretical background of the DOE and provides step-by-step instruction for its implementation in HPLC pharmaceutical practice. It particularly discusses the classification of various design types and their possibilities to rationalize the different stages of HPLC method development workflow, such as the selection of the most influential factors, factors optimization and assessment of the method robustness. Additionally, the application of the DOE-based Analytical Quality by Design (AQbD) concept in the LC method development has been summarized. Recent achievements in the use of DOE in the development of stability-indicating LC and hyphenated LC-MS methods have also been briefly reported. Performing of Quantitative structure retention relationship (QSRR) study enhanced with DOE-based data collection was recomended as a future perspective in description of retention in HPLC system.

Column Classification/Characterisation of Strong Cation Exchange Phases for the Liquid Chromatographic Analysis of Small Molecular Weight Bases

A simple, rapid and robust protocol for the characterisation of strong cation exchange columns for the analysis of small molecular weight bases is described. A range of ten different phases were characterised, and the resultant selectivity and retention factors analysed using Principal Component Analysis. The score plots for the first and second principal components described 83% of the variability within the dataset. Score plots highlighted the large chromatographic differences observed between the phases, the validity of which was established using a larger range of bases. All the strong cation exchange materials demonstrated a synergistic mixed mode (i.e. ion exchange and hydrophobic) retention mechanism. Principal Component Analysis also highlighted the potential difficulty in locating suitable strong cation exchange “back-up” columns for the analysis of small molecular weight bases in that the characterised columns all displayed very different selectivities. The robustness of the protocol was confirmed by a factorial design experiment.

An ultra-robust fingerprinting method for quality assessment of traditional Chinese medicine using multiple reaction monitoring mass spectrometry

Chromatographic fingerprinting has been perceived as an essential tool for assessing quality and chemical equivalence of traditional Chinese medicine. However, this pattern-oriented approach still has some weak points in terms of chemical coverage and robustness. In this work, we proposed a multiple reaction monitoring (MRM)-based fingerprinting method in which approximately 100 constituents were simultaneously detected for quality assessment. The derivative MRM approach was employed to rapidly design MRM transitions independent of chemical standards, based on which the large-scale fingerprinting method was efficiently established. This approach was exemplified on QiShenYiQi Pill (QSYQ), a traditional Chinese medicine-derived drug product, and its robustness was systematically evaluated by four indices: clustering analysis by principal component analysis, similarity analysis by the congruence coefficient, the number of separated peaks, and the peak area proportion of separated peaks. Compared with conventional ultraviolet-based fingerprints, the MRM fingerprints provided not only better discriminatory capacity for the tested normal/abnormal QSYQ samples, but also higher robustness under different chromatographic conditions (i.e., flow rate, apparent pH, column temperature, and column). The result also showed for such large-scale fingerprints including a large number of peaks, the angle cosine measure after min-max normalization was more suitable for setting a decision criterion than the unnormalized algorithm. This proof-of-concept application gives evidence that combining MRM technique with proper similarity analysis metrices can provide a highly sensitive, robust and comprehensive analytical approach for quality assessment of traditional Chinese medicine.

•

MRM fingerprints are proposed for quality assessment of traditional medicine.

•

MRM fingerprints show favorable robustness, coverage and discriminatory capacity.

•

Similarity analysis methods for such large-scale fingerprints are proposed.

An Unbiased Lipid Phenotyping Approach To Study the Genetic Determinants of Lipids and Their Association with Coronary Heart Disease Risk Factors

Direct infusion high-resolution mass spectrometry (DIHRMS) is a novel, high-throughput approach to rapidly and accurately profile hundreds of lipids in human serum without prior chromatography, facilitating in-depth lipid phenotyping for large epidemiological studies to reveal the detailed associations of individual lipids with coronary heart disease (CHD) risk factors. Intact lipid profiling by DIHRMS was performed on 5662 serum samples from healthy participants in the Pakistan Risk of Myocardial Infarction Study (PROMIS). We developed a novel semi-targeted peak-picking algorithm to detect mass-to-charge ratios in positive and negative ionization modes. We analyzed lipid partial correlations, assessed the association of lipid principal components with established CHD risk factors and genetic variants, and examined differences between lipids for a common genetic polymorphism. The DIHRMS method provided information on 360 lipids (including fatty acyls, glycerolipids, glycerophospholipids, sphingolipids, and sterol lipids), with a median coefficient of variation of 11.6% (range: 5.4-51.9). The lipids were highly correlated and exhibited a range of associations with clinical chemistry biomarkers and lifestyle factors. This platform can provide many novel insights into the effects of physiology and lifestyle on lipid metabolism, genetic determinants of lipids, and the relationship between individual lipids and CHD risk factors.

Aptamers as quality control tool for production, storage and biosimilarity of the anti-CD20 biopharmaceutical rituximab

Detailed analysis of biopharmaceuticals is crucial for safety, efficacy and stability. Aptamers, which are folded, single-stranded oligonucleotides, can be used as surrogate antibodies to detect subtle conformational changes. We aimed to generate and assess DNA aptamers against the therapeutic anti-CD20 antibody rituximab. Six rituximab-specific aptamers with Kd = 354-887 nM were obtained using the magnetic bead-based systematic evolution of ligands by exponential enrichment (SELEX) technology. Aptamer folds were analysed by online prediction tools and circular dichroism spectroscopy suggesting quadruplex structures for two aptamers while others present B-DNA helices. Aptamer binding and robustness with respect to minor differences in buffer composition or aptamer folding were verified in the enzyme-linked apta-sorbent assay. Five aptamers showed exclusive specificity to the Fab-fragment of rituximab while one aptamer revealed a broader recognition pattern to other monoclonal antibodies. Structural differences upon incubation at 40 °C for 72 h or UV exposure of rituximab were uncovered by four aptamers. High similarity between rituximab originator and biosimilar lots was demonstrated. The most sensitive aptamer (RA2) detected signal changes for all lots of a copy product suggesting conformational differences. For the first time, a panel of rituximab-specific aptamers was generated allowing the assessment of conformational coherence during production, storage, and biosimilarity of different products.

An overview of experimental designs in HPLC method development and validation

Chemometric approaches have been increasingly viewed as precious complements to high performance liquid chromatographic practices, since a large number of variables can be simultaneously controlled to achieve the desired separations. Moreover, their applications may efficiently identify and optimize the significant factors to accomplish competent results through limited experimental trials. The present manuscript discusses usefulness of various chemometric approaches in high and ultra performance liquid chromatography for (i) methods development from dissolution studies and sample preparation to detection, considering the progressive substitution of traditional detectors with tandem mass spectrometry instruments and the importance of stability indicating assays (ii) method validation through screening and optimization designs. Choice of appropriate types of experimental designs so as to either screen the most influential factors or optimize the selected factors' combination and the mathematical models in chemometry have been briefly recalled and the advantages of chemometric approaches have been emphasized. The evolution of the design of experiments to the Quality by Design paradigm for method development has been reviewed and the Six Sigma practice as a quality indicator in chromatography has been explained. Chemometric applications and various strategies in chromatographic separations have been described.

Simultaneous determination of selected veterinary antibiotics in Nile tilapia (Orechromis niloticus) and water samples by HPLC/UV and LC-MS/MS

A method was optimized and validated for simultaneous estimation of some antibiotics such as CTC, DOX, FF, FLU, NAL, SDI, STZ and TMP in fish muscle and water samples.

Computer assisted liquid chromatographic method development for the separation of therapeutic proteins

This review summarizes the use of computer assisted liquid chromatographic method development for the analytical characterization of protein biopharmaceuticals.

Development of an optimized HPLC method for the simultaneous determination of six compounds containing β-lactam ring in human plasma and urine using experimental design methodology

β-Lactam antibiotics are commonly prescribed with β-lactamase inhibitors to patients, for that it is necessary to develop an optimized chromatographic method which determine them simultaneously in biological fluids.