An integrated high-performance liquid chromatography-mass spectrometry system for the activity-dependent analysis of matrix metalloproteases

Tutorial review for peptide assays: An ounce of pre-analytics is worth a pound of cure

The recent increase in peptidomimetic-based medications and the growing interest in peptide hormones has brought new attention to the quantification of peptides for diagnostic purposes. Indeed, the circulating concentrations of peptide hormones in the blood provide a snapshot of the state of the body and could eventually lead to detecting a particular health condition. Although extremely useful, the quantification of such molecules, preferably by liquid chromatography coupled to mass spectrometry, might be quite tricky. First, peptides are subjected to hydrolysis, oxidation, and other post-translational modifications, and, most importantly, they are substrates of specific and nonspecific proteases in biological matrixes. All these events might continue after sampling, changing the peptide hormone concentrations. Second, because they include positively and negatively charged groups and hydrophilic and hydrophobic residues, they interact with their environment; these interactions might lead to a local change in the measured concentrations. A phenomenon such as nonspecific adsorption to lab glassware or materials has often a tremendous effect on the concentration and needs to be controlled with particular care. Finally, the circulating levels of peptides might be low (pico- or femtomolar range), increasing the impact of the aforementioned effects and inducing the need for highly sensitive instruments and well-optimized methods. Thus, despite the extreme diversity of these peptides and their matrixes, there is a common challenge for all the assays: the need to keep concentrations unchanged from sampling to analysis. While significant efforts are often placed on optimizing the analysis, few studies consider in depth the impact of pre-analytical steps on the results. By working through practical examples, this solution-oriented tutorial review addresses typical pre-analytical challenges encountered during the development of a peptide assay from the standpoint of a clinical laboratory. We provide tips and tricks to avoid pitfalls as well as strategies to guide all new developments. Our ultimate goal is to increase pre-analytical awareness to ensure that newly developed peptide assays produce robust and accurate results.

Immunoaffinity extraction followed by enzymatic digestion for the isolation and identification of proteins employing automated μSPE reactors and mass spectrometry

This work describes a novel automated and rapid method for bottom-up proteomics combining protein isolation with a micro-immobilised enzyme reactor (IMER). Crosslinking chemistry based on 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) coupling was exploited to immobilise trypsin and antibodies onto customisable silica particles coated with carboxymethylated dextran (CMD). This novel silica–CMD solid-phase extraction material was characterised using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), conductometric titrations and enzymatic colorimetric assays. Micro-solid-phase extraction (μSPE) cartridges equipped with the modified CMD material were employed and integrated into an automated and repeatable workflow using a sample preparation workstation to achieve rapid and repeatable protein isolation and pre-concentration, followed by tryptic digestion producing peptide fragments that were identified by liquid chromatography mass spectrometry (LC-MS).

Graphical abstract

Detecting the PEX Like Domain of Matrix Metalloproteinase-14 (MMP-14) with Therapeutic Conjugated CNTs

Matrix metalloproteinases (MMPs) are essential proteins acting directly in the breakdown of the extra cellular matrix and so in cancer invasion and metastasis. Given its impact on tumor angiogenesis, monitoring MMP-14 provides strategic insights on cancer severity and treatment. In this work, we report a new approach to improve the electrochemical interaction of the MMP-14 with the electrode surface while preserving high specificity. This is based on the detection of the hemopexin (PEX) domain of MMP-14, which has a greater availability with a stable and low-cost commercial molecule, as a recognition element. This molecule, called NSC-405020, is specific of the PEX domain of MMP-14 within the binding pocket. Through the covalent grafting of the NSC-405020 molecule on carbon nanotubes (CNTs), we were able to detect and quantify MMP-14 using electrochemical impedance spectroscopy with a linear range of detection of 10 ng⋅mL^-1 to 100 ng⋅mL^-1, and LOD of 7.5 ng⋅mL^-1. The specificity of the inhibitory small molecule was validated against the PEX domain of MMP-1. The inhibitor loaded CNTs system showed as a desirable candidate to become an alternative to the conventional recognition bioelements for the detection of MMP-14.

Proteolytic Cleavage-Mechanisms, Function, and "Omic" Approaches for a Near-Ubiquitous Posttranslational Modification

Proteases enzymatically hydrolyze peptide bonds in substrate proteins, resulting in a widespread, irreversible posttranslational modification of the protein's structure and biological function. Often regarded as a mere degradative mechanism in destruction of proteins or turnover in maintaining physiological homeostasis, recent research in the field of degradomics has led to the recognition of two main yet unexpected concepts. First, that targeted, limited proteolytic cleavage events by a wide repertoire of proteases are pivotal regulators of most, if not all, physiological and pathological processes. Second, an unexpected in vivo abundance of stable cleaved proteins revealed pervasive, functionally relevant protein processing in normal and diseased tissue-from 40 to 70% of proteins also occur in vivo as distinct stable proteoforms with undocumented N- or C-termini, meaning these proteoforms are stable functional cleavage products, most with unknown functional implications. In this Review, we discuss the structural biology aspects and mechanisms of catalysis by different protease classes. We also provide an overview of biological pathways that utilize specific proteolytic cleavage as a precision control mechanism in protein quality control, stability, localization, and maturation, as well as proteolytic cleavage as a mediator in signaling pathways. Lastly, we provide a comprehensive overview of analytical methods and approaches to study activity and substrates of proteolytic enzymes in relevant biological models, both historical and focusing on state of the art proteomics techniques in the field of degradomics research.

A chemical biological strategy to facilitate diabetic wound healing

A complication of diabetes is the inability of wounds to heal in diabetic patients. Diabetic wounds are refractory to healing due to the involvement of activated matrix metalloproteinases (MMPs), which remodel the tissue resulting in apoptosis. There are no readily available methods that identify active unregulated MMPs. With the use of a novel inhibitor-tethered resin that binds exclusively to the active forms of MMPs, coupled with proteomics, we quantified MMP-8 and MMP-9 in a mouse model of diabetic wounds. Topical treatment with a selective MMP-9 inhibitor led to acceleration of wound healing, re-epithelialization, and significantly attenuated apoptosis. In contrast, selective pharmacological inhibition of MMP-8 delayed wound healing, decreased re-epithelialization, and exhibited high apoptosis. The MMP-9 activity makes the wounds refractory to healing, whereas that of MMP-8 is beneficial. The treatment of diabetic wounds with a selective MMP-9 inhibitor holds great promise in providing heretofore-unavailable opportunities for intervention of this disease.

A simplified method for peptide de novo sequencing using (18)O labeling

Incorporation of an (18)O atom into a peptide C-terminus by proteolytic cleavage in the presence of H2(18)O is one of the most effective ways of enhancing tandem mass spectrometry (MS/MS)-based de novo sequencing. Incorporation is usually accomplished by procedures including vacuum-assisted drying of tryptic peptides extracted from gels, their subsequent reconstitution in a H2(16)O/H2(18)O mixture and re-treatment with trypsin. In the present work, we propose a simplified procedure for (18)O incorporation into tryptic peptides by adding H2(18)O and trypsin to the original digest solution. In comparison to published methods, the proposed protocol for peptide de novo sequencing brings significant advantages in analysis and workflow with no deterioration in method performance. We show that labeling by this simplified method leads to a highlighting of the y-ion fragment series in the peptide matrix-assisted laser desorption/ionization (MALDI)- MS/MS data, which facilitates MS/MS data interpretation. We also prove that eliminating acid extraction of peptides from gels does not result in a decrease in sequence coverage or a qualitative loss of particular peptides detectable by MALDI-MS. The method was examined by MALDI-MS/MS on bovine serum albumin and recombinant histidine kinase CKI1 from Arabidopsis thaliana, and was verified by de novo sequencing of tryptic peptides originating from Apodemus sylvaticus salivary proteins.

Detection of endogenous matrix metalloprotease-12 active form with a novel broad spectrum activity-based probe

Matrix metalloproteases (MMPs) have attracted considerable attention as critical mediators of pathological tissue remodeling processes. However it remains an unresolved challenge to detect their active forms in biological samples. To prove the efficacy of a recently developed MMP activity-based probe, we examined the content in MMP active forms of bronchoalveolar lavage fluids (BALf) from male C57BL/6 mice exposed to ultrafine carbon black nanoparticles, a model of chronic obstructive pulmonary disease. This probe was shown to label proteins, mostly expressed in BALf of mice exposed to nanoparticles. Using competition assays with a selective MMP-12 inhibitor as well as MMP-12 knock-out mice, one of these proteins was identified as the active form of the catalytic domain of MMP-12. This new probe can detect the active form of MMP-12 down to a threshold of 1 fmol. Radioactive counting showed the concentration of the active form of MMP-12 to be around 1 fmol/μl in BALf from nanoparticle-treated mice. A less sensitive probe would therefore not have detected MMP-12. As the probe can detect other MMPs in the femtomolar range, it is a potentially powerful tool for monitoring the levels of MMP active forms in various diseases.

Immobilized enzyme reactors in HPLC and its application in inhibitor screening: A review

This paper sets out to summarize the literatures based on immobilized enzyme bio-chromatography and its application in inhibitors screening in the last decade. In order to screen enzyme inhibitors from a mass of compounds in preliminary screening, multi-pore materials with good biocompatibility are used for the supports of immobilizing enzymes, and then the immobilized enzyme reactor applied as the immobilized enzyme stationary phase in HPLC. Therefore, a technology platform of high throughput screening is gradually established to screen the enzyme inhibitors as new anti-tumor drugs. Here, we briefly summarize the selective methods of supports, immobilization techniques, co-immobilized enzymes system and the screening model.

Studying protein-protein affinity and immobilized ligand-protein affinity interactions using MS-based methods

This review discusses the most important current methods employing mass spectrometry (MS) analysis for the study of protein affinity interactions. The methods are discussed in depth with particular reference to MS-based approaches for analyzing protein-protein and protein-immobilized ligand interactions, analyzed either directly or indirectly. First, we introduce MS methods for the study of intact protein complexes in the gas phase. Next, pull-down methods for affinity-based analysis of protein-protein and protein-immobilized ligand interactions are discussed. Presently, this field of research is often called interactomics or interaction proteomics. A slightly different approach that will be discussed, chemical proteomics, allows one to analyze selectivity profiles of ligands for multiple drug targets and off-targets. Additionally, of particular interest is the use of surface plasmon resonance technologies coupled with MS for the study of protein interactions. The review addresses the principle of each of the methods with a focus on recent developments and the applicability to lead compound generation in drug discovery as well as the elucidation of protein interactions involved in cellular processes. The review focuses on the analysis of bioaffinity interactions of proteins with other proteins and with ligands, where the proteins are considered as the bioactives analyzed by MS.

Comparison of metalloproteinase protein and activity profiling

Proteolytic enzymes play fundamental roles in many biological processes. Members of the matrix metalloproteinase (MMP) family have been shown to take part in processes crucial in disease progression. The current study used the ExcelArray Human MMP/TIMP Array to quantify MMP and tissue inhibitor of metalloproteinase (TIMP) production in the lysates and media of 14 cancer cell lines and 1 normal cell line. The overall patterns were very similar in terms of which MMPs and TIMPs were secreted in the media versus associated with the cells in the individual samples. However, more MMP was found in the media (in both amount and variety). TIMP-1 was produced in all cell lines. MMP activity assays with three different fluorescence resonance energy transfer (FRET) substrates were then used to determine whether protein production correlated with function for the WM-266-4 and BJ cell lines. Metalloproteinase activity was observed for both cell lines with a general MMP substrate (Knight SSP), consistent with protein production data. However, although both cell lines promoted the hydrolysis of a more selective MMP substrate (NFF-3), metalloproteinase activity was confirmed only in the BJ cell line. The use of inhibitors to confirm metalloproteinase activities pointed to the strengths and weaknesses of in situ FRET substrate assays.

Current technological challenges in biomarker discovery and validation

In this review we will give an overview of the issues related to biomarker discovery studies with a focus on liquid chromatography-mass spectrometry (LC-MS) methods. Biomarker discovery is based on a close collaboration between clinicians, analytical scientists and chemometritians/statisticians. It is critical to define the final purpose of a biomarker or biomarker pattern at the onset of the study and to select case and control samples accordingly. This is followed by designing the experiment, starting with the sampling strategy, sample collection, storage and separation protocols, choice and validation of the quantitative profiling platform followed by data processing, statistical analysis and validation workflows. Biomarker candidates that result after statistical validation should be submitted for further validation and, ideally, be connected to the disease mechanism after their identification. Since most discovery studies work with a relatively small number of samples, it is necessary to assess the specificity and sensitivity of a given biomarker-based assay in a larger set of independent samples, preferably analyzed at another clinical center. Targeted analytical methods of higher throughput than the original discovery method are needed at this point and LC-tandem mass spectrometry is gaining acceptance in this field. Throughout this review, we will focus on possible sources of variance and how they can be assessed and reduced in order to avoid false positives and to reduce the number of false negatives in biomarker discovery research.

Mechanism-based profiling of MMPs

The recognition that the successful clinical use of MMP inhibitors will require quantitative correlation of MMP activity with disease type, and to disease progression, has stimulated intensive effort toward the development of sensitive assay methods, improved analytical methods for the determination of the structural profile for MMP-sub-type inhibition, and the development of new methods for the determination - in both quantitative and qualitative terms - of MMP activity. This chapter reviews recent progress toward these objectives, with particular emphasis on the quantitative and qualitative profiling of MMP activity in cells and tissues. Quantitative determination of MMP activity is made from the concentration of the MMP from the tissue, using immobilization of a broad-spectrum MMP inhibitor on a chromatography resin. Active MMP, to the exclusion of MMP zymogens and endogenous TIMP-inhibited MMPs, is retained on the column. Characterization of the MMP sub-type(s) follows from appropriate analysis of the active MMP eluted from the resin. Qualitative determination of MMP involvement in disease can be made using an MMP sub-type-selective inhibitor. The proof of principle, with respect to this qualitative determination of the disease involvement of the gelatinase MMP-2 and MMP-9 sub-types, is provided by the class of thiirane-based MMP mechanism-based inhibitors (SB-3CT as the prototype). Positive outcomes in animal models of disease having MMP-2 and/or -9 dependency follow administration of this MMP inhibitor, whereas this inhibitor is inactive in disease models where other MMPs (such as MMP-14) are involved.

Detection of matrix metalloproteinase active forms in complex proteomes: evaluation of affinity versus photoaffinity capture

Various attempts to detect matrix metalloproteinase (MMP) active forms from complex proteomes, based on the use of specific photoactivatable affinity probes, have up to now failed. To overcome this failure, an affinity approach has been evaluated as an alternative to the photoaffinity one. For this purpose, two probes were synthesized to interact specifically with the active site of MMPs and allow isolation of MMP/probe complexes on magnetic beads through a biotin linker. Using phosphinic peptide chemistry, we prepared an affinity probe displaying picomolar potency toward several MMPs, and a related photoaffinity probe incorporating a photoactivatable azido group exhibiting subnanomolar affinity toward these targets. By a combination of silver-staining detection and MALDI peptide mass fingerprints, a systematic comparison was made of both strategies in terms of hMMP-12 and hMMP-8 recovery and identification when present in mixtures of different complexity. The results obtained show that the affinity protocol is superior to the photoaffinity strategy in terms of quantity of captured MMPs and number of MMP tryptic fragments detected in MALDI-MS. The specificity and efficiency of the affinity capture protocol developed in this study allowed easy, fast, and unambiguous detection by MALDI-MS of three hMMPs (2, 8, and 12), from a single affinity capture experiment, when added (10-36 ng of MMPs) to a tumor extract (10 microg). Thus, the tools and approaches reported should enable us to progress in the detection of endogenous active forms of MMPs in complex proteomes, an important objective with many diagnostic applications.

Functional proteomics on zinc-dependent metalloproteinases using inhibitor probes

Metzincins are a family of zinc(II)-dependent metalloproteinases with well known members such as the matrix metalloproteinases (MMPs) and A disintegrin and metalloproteinases (ADAMs). Metzincins are largely responsible for the modulation and regulation of the extracellular matrix by proteolytic degradation of extracellular matrix (ECM) proteins, and by liberation or production of biologically active proteins from their pro-forms. Since metzincin activity is strictly regulated in vivo, novel analysis methods are necessary to elucidate the role of the active enzymes in health and disease. This concept gives an overview of available methods, and describes an approach to use synthetic metzincin inhibitors as affinity probes for selective determination of active metzincins in biological and clinical samples.