Pesticide analysis in tomatoes by solid-phase microextraction and micellar electrokinetic chromatography

Rapid multiplug filtration cleanup with multiple-walled carbon nanotubes and gas chromatography-triple-quadruple mass spectrometry detection for 186 pesticide residues in tomato and tomato products

This study reports the development and validation of a novel rapid cleanup method based on multiple-walled carbon nanotubes in a packed column filtration procedure for analysis of pesticide residues followed by gas chromatography-triple-quadruple tandem mass spectrometry detection. The cleanup method was carried out by applying the streamlined procedure on a multiplug filtration cleanup column with syringes. The sorbent used for removing the interferences in the matrices is multiple-walled carbon nanotubes mixed with anhydrous magnesium sulfate. The proposed cleanup method is convenient and time-saving as it does not require any solvent evaporation, vortex, or centrifugation procedures. It was validated on 186 pesticides and 3 tomato product matrices spiked at two concentration levels of 10 and 100 μg kg(-1). Satisfactory recoveries and relative standard deviations are shown for most pesticides using the multiplug filtration cleanup method in tomato product samples. The developed method was successfully applied to the determination of pesticide residues in market samples.

Recent advances in enrichment techniques for trace analysis in capillary electrophoresis

CE is gaining great popularity as a well-established separation technique for many fields such as pharmaceutical research, clinical application, environmental monitoring, and food analysis, owing to its high resolving power, rapidity, and small amount of samples and reagents required. However, the sensitivity in CE analysis is still considered as being inferior to that in HPLC analysis. Diverse enrichment methods and techniques have been increasingly developed for overcoming this issue. In this review, we summarize the recent advances in enrichment techniques containing off-line preconcentration (sample preparation) and on-line concentration (sample stacking) to enhancing sensitivity in CE for trace analysis over the last 5 years. Some relatively new cleanup and preconcentration methods involving the use of dispersive liquid-liquid microextraction, supercritical fluid extraction, matrix solid-phase dispersion, etc., and the continued use and improvement of conventional SPE, have been comprehensively reviewed and proved effective preconcentration alternatives for liquid, semisolid, and solid samples. As for CE on-line stacking, we give an overview of field amplication, sweeping, pH regulation, and transient isotachophoresis, and the coupling of multiple modes. Moreover, some limitations and comparisons related to such methods/techniques are also discussed. Finally, the combined use of various enrichment techniques and some significant attempts are proposed to further promote analytical merits in CE.

Pesticide residues in tomatoes from greenhouses in Souss Massa Valley, Morocco

Eight pesticide residues in tomato samples collected in the area of Souss Massa Valley (Southern Morocco) were analyzed. The detected residue levels ranged from 0.001 to 0.400 mg kg(-1) for dicofol, from 0.003 to 0.170 mg kg(-1) for procymidone, from 0.001 to 0.250 mg kg(-1) for chlorothalonil, from 0.050 to 0.500 mg kg(-1) for bifenthrin, from 0.001 to 0.010 mg kg(-1) for λ-cyhalothrin, from 0.001 to 0.300 mg kg(-1) for cypermethrin, from 0.010 to 1 mg kg(-1) for deltamethrin and from 0.003 to 1.123 mg kg(-1) for endosulfan. European MRL for endosulfan in tomatoes set in 0.500 mg kg(-1), was exceeded in 8 samples, and MRL for deltamethrin set in 0.300 mg kg(-1) for tomatoes was exceeded in 2 samples.

MEKC as a powerful growing analytical technique

This review summarizes the principle and the developments in MEKC in terms of separation power, sensitivity, and detection approaches more than 25 years after its appearance. Newly used surfactants are mentioned. Classical and new sample concentration techniques in MEKC are described. The different detection approaches in MEKC with advantages, limitations, and future prospects are also discussed. This review highlights the wider application of MEKC in different analytical fields. Various recent selected applications of this technique in different analytical fields are reported.

Application of dispersive liquid-liquid microextraction and reversed phase-high performance liquid chromatography for the determination of two fungicides in environmental water samples

Dispersive liquid-liquid microextraction (DLLME) has been developed for the extraction and preconcentration of diethofencarb (DF) and pyrimethanil (PM) in environmental water. In the method, a suitable mixture of extraction solvent (50 μL carbon tetrachloride) and dispersive solvent (0.75 mL acetonitrile) are injected into the aqueous samples (5.00 mL) and the cloudy solution is observed. After centrifugation, the enriched analytes in the sediment phase were determined by HPLC-VWD. Different influencing factors, such as the kind and volume of extraction and dispersive solvent, extraction time and salt effect were investigated. Under the optimum conditions, the enrichment factors for DF and PM were both 108 and the limit of detection were 0.021 ng mL(-1) and 0.015ng mL(-1), respectively. The linear ranges were 0.08-400ng mL(-1) for DF and 0.04-200ng mL(-1) for PM. The relative standard deviation (RSDs) were both almost at 6.0% (n = 6). The relative recoveries from samples of environmental water were from the range of 87.0 to 107.2%. Compared with other methods, DLLME is a very simple, rapid, sensitive (low limit of detection) and economical (only 5 mL volume of sample) method.

Contemporary sample stacking in CE

Sample stacking techniques remain an important tool for enhancement of the selectivity and sensitivity of analyses in contemporary CZE. This contribution reviews new knowledge on this topic published since 2006. It is organized according to the operational principles used, which include concentration adjustment, application of a pH step, MEKC and sweeping, and transient ITP. Techniques combining several of these principles and comparative studies are also included.

Development of an analytical procedure for the determination of emerging and priority organic pollutants in leafy vegetables by pressurized solvent extraction followed by GC-MS determination

A new multiresidue method for the determination of 13 emerging and priority pollutants in lettuce, including pesticides, pharmaceuticals, personal care products, polycyclic aromatic hydrocarbons (PAHs), and phenolic estrogens, has been developed using matrix solid-phase dispersion combined to pressurized fluid extraction (PFE) followed by gas chromatography coupled to mass spectrometry determination. A sequential optimization strategy based on solvent optimization first, followed by experimental design, was performed in order to maximize target analyte extraction with the aid of response surface methodology. Firstly, a full factorial design was applied to choose the significant variables in PFE; extraction time and temperature were found to have the biggest overall effect on response for most of analytes. They were later optimized performing a central composite design and the variable response of these factors was modeled for all analytes. It was found that marked differences in physicochemical nature exerted a strong influence on extraction conditions and yield. Therefore, the effect of parameters on the response was rather different for some compounds. To overcome this conflicting behavior, a multiple response simultaneous optimization was applied using the desirability function to achieve global optimal operating conditions. The optimal conditions were attained at 13.5 min (two extraction cycles) and 104 degrees C in the PFE by using hexane acetone mixture (1:1). Limit of detection and limit of quantitation values were found to be between 6.6 and 58 and 7.6 and 61.7 microg kg(-1), respectively.