Identification of degradation products in loxoprofen sodium adhesive tapes by liquid chromatography–mass spectrometry and dynamic pressurized liquid extraction–solid-phase extraction coupled to liquid chromatography–nuclear magnetic resonance spectroscopy

Green Extraction Processes for Complex Samples from Vegetable Matrices Coupled with On-Line Detection System: A Critical Review

The detection of analytes in complex organic matrices requires a series of analytical steps to obtain a reliable analysis. Sample preparation can be the most time-consuming, prolonged, and error-prone step, reducing the reliability of the investigation. This review aims to discuss the advantages and limitations of extracting bioactive compounds, sample preparation techniques, automation, and coupling with on-line detection. This review also evaluates all publications on this topic through a longitudinal bibliometric analysis, applying statistical and mathematical methods to analyze the trends, perspectives, and hot topics of this research area. Furthermore, state-of-the-art green extraction techniques for complex samples from vegetable matrices coupled with analysis systems are presented. Among the extraction techniques for liquid samples, solid-phase extraction was the most common for combined systems in the scientific literature. In contrast, for on-line extraction systems applied for solid samples, supercritical fluid extraction, ultrasound-assisted extraction, microwave-assisted extraction, and pressurized liquid extraction were the most frequent green extraction techniques.

High-Pressure Technologies for the Recovery of Bioactive Molecules from Agro-Industrial Waste

Large amounts of food waste are produced each year. These residues require appropriate management to reduce their environmental impact and, at the same time, economic loss. However, this waste is still rich in compounds (e.g., colorants, antioxidants, polyphenols, fatty acids, vitamins, and proteins) that can find potential applications in food, pharmaceutical, and cosmetic industries. Conventional extraction techniques suffer some drawbacks when applied to the exploitation of food residues, including large amounts of polluting solvents, increased time of extraction, possible degradation of the active molecules during extraction, low yields, and reduced extraction selectivity. For these reasons, advanced extraction techniques have emerged in order to obtain efficient residue exploitation using more sustainable processes. In particular, performing extraction under high-pressure conditions, such as supercritical fluids and pressurized liquid extraction, offers several advantages for the extraction of bioactive molecules. These include the reduced use of toxic solvents, reduced extraction time, high selectivity, and the possibility of being applied in combination in a cascade of progressive extractions. In this review, an overview of high-pressure extraction techniques related to the recovery of high added value compounds from waste generated in food industries is presented and a critical discussion of the advantages and disadvantages of each process is reported. Furthermore, the possibility of combined multi-stage extractions, as well as economic and environmental aspects, are discussed in order to provide a complete overview of the topic.

Occurrence, detection and ecotoxicity studies of selected pharmaceuticals in aqueous ecosystems- a systematic appraisal

Pharmaceutical compounds (PCs) have globally emerged as a significant group of environmental contaminants due to the constant detection of their residues in the environment. The main scope of this review is to fill the void of information on the knowledge on the African occurrence of selected PCs in environmental matrices in comparison with those outside Africa and their respective toxic actions on both aquatic and non-aquatic biota through ecotoxicity bioassays. To achieve this objective, the study focused on commonly used and detected pharmaceutical drugs (residues). Based on the conducted literature survey, Africa has the highest levels of ciprofloxacin, sulfamethoxazole, lamivudine, acetaminophen, and diclofenac while Europe has the lowest of all these PC residues in her physical environments. For ecotoxicity bioassays, the few data available are mostly on individual groups of pharmaceuticals whereas there is sparsely available data on their combined forms.

Dereplication Based Strategy for Rapid Identification and Isolation of a Novel Anti-inflammatory Flavonoid by LCMS/MS from Colebrookea oppositifolia

Colebrookea oppositifolia is a folkloric medicinal plant, well known for its tremendous medicinal properties such as curing epilepsy, ulcers, and urinary problems. The aim of the present study was to apply the dereplication strategy on the ethanol extract of C. oppositifolia with potent anti-inflammatory activity for the rapid identification and isolation of novel bioactive molecules to aid the drug discovery process. An integrated approach using liquid chromatography-mass spectrometry (LCMS) followed by preparative high-performance liquid chromatography (HPLC) was used for the isolation of potent molecules from the anti-inflammatory extract of C. oppositifolia . Purity of the compounds (>98.5%) was established by HPLC, and identification was carried out by NMR and ESI-MS. 5,6,7-Trihydroxyflavone-3-O-glucuronide methyl ester (compound III) isolated from C. oppositifolia was extensively studied for anti-inflammatory potential in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells and the mice model. Compound III significantly repressed various proinflammatory mediators and upregulated the release of anti-inflammatory cytokine IL-10. Compound III reduced inflammation when studied for parameters such as the phagocytic index, carrageenan-induced paw edema in mice, and effect on organ weight. It reduced inflammation in a dose-dependent manner both in vitro and in vivo. Further molecular insights into the study revealed that compound III blocks the phosphorylation of I kappa b kinase α/β (IKKα/β), IκBα, and nuclear factor kB p65 (NF-κBp65) which is a key controller of inflammation, thereby showing anti-inflammatory potential. Hence, this study permits further investigation to develop compound III as an anti-inflammatory drug.

Identification and Structure Elucidation of Forced Degradation Products of the Novel Propionic acid Derivative Loxoprofen: Development of Stability-Indicating Chromatographic Methods Validated as per ICH Guidelines

Loxoprofen sodium (LOX) is a recently developed novel propionic acid derivative. Owing to its instability under both hydrolytic and oxidative conditions, the development of simple, rapid and sensitive methods for its determination in the presence of its possible forced degradation products becomes essential. Two simple chromatographic methods, high-performance thin layer chromatography (HPTLC) and high-performance liquid chromatography (HPLC), were developed associated with ultraviolet (UV) detection. In HPTLC-densitometric method, the separation of LOX from its degradation products was achieved using silica gel F254 plates and toluene:acetone:acetic acid (1.8:1.0:0.1, v/v/v) as the developing system followed by densitometric scanning at 220 nm. In the HPLC-UV method, the separation was performed using isocratic elution system with acetonitrile: 0.15% triethylamine (pH 2.2) (50:50, v/v) on C18 analytical column. The flow rate was optimized at 1.0 mL·min-1 and UV detection was achieved at 220 nm. Validation was performed in accordance with the International Conference on Harmonization guidelines and the method was perfectly applied for determination of LOX in its pharmaceutical preparation. The results obtained were statistically compared to those obtained after application of the official HPLC method, where no significant difference was found incompliance with precision and accuracy. Identification and characterization of the possible hydrolytic degradation product under alkaline conditions and that produced during oxidative degradation using hydrogen peroxide were structurally elucidated using infrared and mass spectrometry analyses.

Online Extraction Coupled to Liquid Chromatography Analysis (OLE-LC): Eliminating Traditional Sample Preparation Steps in the Investigation of Solid Complex Matrices

Current methods employed for the analysis of the chemical composition of solid matrices (such as plant, animal, or human tissues; soil; etc.) often require many sample treatment steps, including an extraction step with exclusively dedicated solvents. This work describes an optimized analytical setup in which the extraction of a solid sample is directly coupled to its analysis by high-performance liquid chromatography. This approach avoids (i) the use of pumps and valves other than those comprising the HPLC instrument, (ii) the use of solvents other than those of the mobile phase, and (iii) the need to stop the mobile phase flow at any time during the full analytical procedure. The compatibility of this approach with the direct analysis of fresh tissues (leaves, stems, and seeds of four plant species with dissimilar chemical compositions) was successfully demonstrated, leading to the elimination of sample preparation steps such as drying, grinding, concentration, dilution, and filtration, among others. This work describes a new, simple, and efficient green approach to minimize or eliminate sample treatment procedures. It could be easily applied for quality control of plant materials and their derived products through chromatographic fingerprints and for untargeted metabolomic investigations of solid matrices, among other applications.

Data Mining FAERS to Analyze Molecular Targets of Drugs Highly Associated with Stevens-Johnson Syndrome

Drug features that are associated with Stevens-Johnson syndrome (SJS) have not been fully characterized. A molecular target analysis of the drugs associated with SJS in the FDA Adverse Event Reporting System (FAERS) may contribute to mechanistic insights into SJS pathophysiology. The publicly available version of FAERS was analyzed to identify disproportionality among the molecular targets, metabolizing enzymes, and transporters for drugs associated with SJS. The FAERS in-house version was also analyzed for an internal comparison of the drugs most highly associated with SJS. Cyclooxygenases 1 and 2, carbonic anhydrase 2, and sodium channel 2 alpha were identified as disproportionately associated with SJS. Cytochrome P450 (CYPs) 3A4 and 2C9 are disproportionately represented as metabolizing enzymes of the drugs associated with SJS adverse event reports. Multidrug resistance protein 1 (MRP-1), organic anion transporter 1 (OAT1), and PEPT2 were also identified and are highly associated with the transport of these drugs. A detailed review of the molecular targets identifies important roles for these targets in immune response. The association with CYP metabolizing enzymes suggests that reactive metabolites and oxidative stress may have a contributory role. Drug transporters may enhance intracellular tissue concentrations and also have vital physiologic roles that impact keratinocyte proliferation and survival. Data mining FAERS may be used to hypothesize mechanisms for adverse drug events by identifying molecular targets that are highly associated with drug-induced adverse events. The information gained may contribute to systems biology disease models.

The effect of ion-pair formation combined with penetration enhancers on the skin permeation of loxoprofen

CONTEXT

Loxoprofen (LOXO) is a non-steroidal anti-inflammatory drug. Repeated oral administrations induce gastrointestinal side effects. Patches are a promising alternative.

OBJECTIVE

The aim of this study was to investigate the effects of organic amines on the skin permeation of LOXO and finally design a patch with a comparable permeation profile and pharmacodynamic effects to the commercial LOXONA® plaster.

MATERIALS AND METHODS

The effects of organic amines were assessed by flux values of LOXO from isopropyl myristate (IPM), using horizontal diffusion cell and rabbit skin. FTIR spectroscopy was used to confirm ion-pair formation. Anti-inflammatory and analgesic activity assessments were performed in the adjuvant arthritis rat model and acetic acid-induced writhing syndrome in mouse, separately.

RESULTS AND DISCUSSION

Results showed that triethylamine (TEA) was the most potential candidate in IPM, with the highest flux of 499.75 ± 32.40 µg/cm(2)/h. In patch, the highest flux of 369.37 ± 34.32 µg/cm(2)/h was still obtained by LOXO-TEA. Combined with penetration enhancers, the cumulative amounts were further increased in presence of 5% IPM, which exhibited a flux of 840.04 ± 66.38 µg/cm(2)/h as two times of the commercial one. Ultimately, anti-inflammatory and analgesic activity assessment presented that a comparable pharmacodynamic activity with the commercial one could be obtained by the patch we designed. Additionally, we also found that LOXO patch applied topically exerted a systemic effect, and the effect was dose-dependent.

CONCLUSION

It was feasible for LOXO patch design by combination of ion-pair technology and chemical enhancers.

Identification and characterization of degradation products of irbesartan using LC-MS/TOF, MS(n), on-line H/D exchange and LC-NMR

Irbesartan was subjected to hydrolytic, oxidative, photolytic and thermal stress, according to ICH guideline Q1A (R2). The drug showed degradation only in acidic, basic and photoacidic conditions, while it was stable to other stress conditions. A total of three degradation products were formed, which were separated on a C-8 column employing a gradient HPLC method. Initially, a complete mass fragmentation pathway of the drug was established with the help of MS/TOF, MS(n) and H/D exchange studies. Subsequently, the degradation products were subjected to LC-MS/TOF and on-line H/D exchange mass studies to obtain their accurate mass, fragment pattern and number of labile hydrogens. The MS results helped to assign tentative structures to degradation products, which were verified through (1)H and 2D COSY LC-NMR experiments. The products were identified as (2'-(1H-tetrazol-5-yl)biphenyl-4-yl)methanamine, 1-(1-((2'-(1H-tetrazol-5-yl)biphenyl-4-yl)methylamino)pentylideneamino)cyclopentane carboxylic acid and 2-butyl-3-(tetrazolo[1,5-f]phenanthridin-6-ylmethyl)-1,3-diazaspiro[4.4]non-1-en-4-one. The structures were justified by mechanisms of their formation.