Titania immobilized polypropylene hollow fiber as a disposable coating for stir bar sorptive extraction–high performance liquid chromatography–inductively coupled plasma mass spectrometry speciation of arsenic in chicken tissues

3D-printed device for the kinetic determination of As(III) in groundwater samples by digital movie analysis

High concentrations of inorganic arsenic in groundwater for human consumption is a worldwide common problem. Particularly, the determination of As(III) becomes important, since this species is more toxic than organic, pentavalent and elemental arsenic forms. In this work, a 3D-printed device that included a 24-well microplate was developed to perform the colourimetric kinetic determination of arsenic (III) by digital movie analysis. A smartphone camera attached to the device was used to take the movie during the process where As(III) inhibited the decolourization of methyl orange. The movie images were subsequently transformed from RGB to YIQ space to obtain a new analytical parameter called "d", which was related to the chrominance of the image. Then, this parameter allowed the determination of the inhibition time of reaction (t_in), which was linearly correlated with the concentration of As(III). A linear calibration curve (R = 0.9995) in the range from 5 μg L^-1 to 200 μg L^-1 was obtained. The method was precise (RSD = 1.2%), and the limits of detection (LOD) and quantification (LOQ) were 1.47 μg L^-1 and 4.44 μg L^-1, respectively. These values were lower than the limit established by the World Health Organization for total arsenic in drinking water (10 μg L^-1). The accuracy of the method was assessed by a recovery study with optimal results (94.3%-104.0%). Additionally, the Analytical GREEnness metric approach was applied, obtaining a score 1.7 times higher than previously published works. The method is simple, portable and low-cost, being in compliance with various principles of green analytical chemistry.

Greenness of lab-on-a-chip devices for analytical processes: Advances & future prospects

Lab-on-a-chip devices have now-a-days become an important aspect of analytical/bioanalytical chemistry having wide range of applications including clinical diagnosis, drug screening, cell biology, environmental monitoring, food safety analysis etc. Conventional lab-on-a-chip devices generally employ chemicals that are not environmentally friendly and were commonly fabricated on hard plastic platform which are non-degradable and hence ignore the importance of green analytical chemistry. In today's scenario, it is highly imperative to protect our environment by using less toxic and environmentally friendly chemicals/solvents and biocompatible platforms. Accordingly, the present article comprehensively reviews on the various green aspects of lab-on-a-chip devices for analytical processes which aim at fabricating environmentally friendly and cost-effective downsized devices so that the risk factor at the user's end upon longer exposure as well as to the environment can be reduced. The decisive factors for the accomplishment of green aspects of lab-on-a-chip devices including sample preparation using lab-on-a-chip systems to minimize the amount of sample/solvents to few microliters only, substitution of harmful solvents with green alternatives, minimal waste generation or proper treatment of waste and biodegradable and biocompatible platforms for fabricating lab-on-a-chip devices have been discussed in details. Additionally, the challenges that may hinder their commercialization are also critically discussed.

The amino - functionalized magnetic graphene oxide combined with graphite furnace atomic absorption spectrometry for determination of trace inorganic arsenic species in water samples

A novel adsorbent of magnetic graphene oxide (GO) chemically modified by cysteamine hydrochloride (Fe₃O₄@SiO₂/GO-NH₂) through thiol-ene click chemistry reaction was synthesized. The prepared Fe₃O₄@SiO₂/GO-NH₂ exhibit selective adsorption to As(V) with high adsorption capacity (52.66 mg g^-1). Taking Fe₃O₄@SiO₂/GO-NH₂ as the adsorbents, a new method of magnetic solid phase extraction (MSPE) combined with graphite furnace atomic absorption spectrometry (GFAAS) was developed in determining trace-level inorganic arsenic species (As(III) and As(V)) in environmental water and bottled water samples. Various experimental parameters affecting the MSPE have been optimized. Under the optimal experimental parameters, the limit of detection of the established method for As(V) was 1.02 ng L^-1, the relative standard deviations were 7.9% (intra-day, c = 50 ng L^-1, n = 5) and 4.6% (inter-day, c = 50 ng L^-1, n = 7), respectively, and the enrichment factor of the method was 392. GBW08666 and GBW08667 (certified reference material) were analyzed to confirm the accuracy of the method, and the results were matched well with the certified values. The established MSPE-GFAAS method was successfully applied in analyzing trace/ultratrace As(III) and As(V) in real water samples.

Ti (IV) modified vinyl phosphate magnetic nanoparticles for simultaneous preconcentration of multiple arsenic species from chicken samples followed by HPLC-ICP-MS analysis

Ti (IV)-modified vinyl phosphate magnetic nanoparticles (Fe₃ O₄ @SiO₂ @KH570-PO₄ -Ti (IV)) was prepared for simultaneous extraction of multiple arsenic species, followed by high performance liquid chromatography (HPLC)- inductively coupled plasma mass spectrometry (ICP-MS) analysis. Inorganic arsenic (iAs), dimethyl arsenic acid (DMA), monomethyl arsenic acid (MMA), p-amino phenyl arsenic acid (p-ASA), 4-hdroxyphenylarsenic acid (4-OH), phenyl arsenic acid (PAA), and 3-nitro-4-hydroxyphenylarsenic acid (ROX) were investigated as interest analytes. It was found that they were quantitatively adsorbed on Fe₃ O₄ @SiO₂ @KH570-PO₄ -Ti (IV) at pH 5, and desorbed completely with 0.1 mol/L sodium hydroxide solution. Enrichment factor of 100-fold was obtained by consuming 100 mL sample solution. Under the optimal conditions, the method combining MSPE with HPLC-ICP-MS presented a linear range of 1-5000 ng/L for seven arsenic species. The limits of detection were 0.39, 0.60, 0.23, 1.85, 0.54, 0.48, and 0.84 ng/L for DMA, MMA, p-ASA, iAs, 4-OH, PAA, ROX, with the relative standard deviations (c = 10 ng/L, n = 7) of 3.6, 3.9, 5.5, 12.4, 6.1, 5.8, 5.0, respectively. The accuracy of the method was validated by analyzing BCR 627 Tuna fish. The application potential of the method was further evaluated by chicken muscle and liver samples. No target arsenic species were detected in these samples, and good recoveries (80.6-123%) were obtained for the spiked samples at low, medium, and high concentration levels.

Enzyme-assisted extraction and liquid chromatography-inductively coupled plasma mass spectrometry for the determination of arsenic species in fish

A sensitive, simple and rapid method for the simultaneous determination of eleven arsenic species has been developed. A high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS) technique was used for the analysis of eleven arsenic species in less than 17 min. Different extraction solutions were explored and the recovery results using water and aqueous acidic solvents, aqueous organic solvents and enzymes showed that 40 mg protease with 0.75 mL 0.5% hydrochloric acid (v/v) as the extraction agent gave the best experimental results. Species separation with ammonium carbonate solution as the mobile phase was conducted on an anion-exchange chromatographic column using gradient elution. The column temperature was 20 °C and kinetic energy discrimination (KED) was employed to eliminate spectral interference. The use of KED mode effectively removed interference from ⁷⁵ArCl. The detection limit (L_D) of the method was in the range of 0.11-0.59 μg kg^-1. Repeatability values obtained for spiked real fish samples were in the range of 1.1%-7.6%. Accuracy was calculated based on the analysis of spiked real fish samples at five concentration levels. Obtained recoveries were 91%-106%. The validated method was used in a pilot study to analyze real samples of fish, the organic arsenic especially AsB was the major arsenic specie present in the analyzed samples, only trace amount of inorganic arsenic were detected. The analytical method should improve the assessment of human exposure associated with arsenic intake from fish.

Speciation analysis of organoarsenic compounds in livestock feed by microwave-assisted extraction and high performance liquid chromatography coupled to atomic fluorescence spectrometry

The development of a new method to determine the presence of the organoarsenic additives p-arsanilic acid (ASA), roxarsone (ROX) and nitarsone (NIT) in livestock feeds by high performance liquid chromatography coupled to ultraviolet oxidation hydride generation atomic fluorescence spectrometry (HPLC-UV/HG-AFS) after microwave assisted extraction (MAE) was proposed. Chromatographic separation was achieved on a C18 column with 2% acetic acid/methanol (96:4, v/v) as the mobile phase. The limits of detection (LODs) were 0.13, 0.09 and 0.08mgL^-1, and the limits of quantification (LOQs) were 0.44, 0.30 and 0.28mgL^-1. The relative standard deviations (RSDs) for ASA, ROX and NIT determined from five measurements of the mixed calibration standard were 3.3, 5.3, and 5.4%, respectively. MAE extraction of phenylated arsenic compounds using 1.5M H₃PO₄ at 120°C for 45min allowed for maximum recoveries (%) of total arsenic (As) and organoarsenic species, with no degradation of these compounds. The extraction of total As was approximately 97%, and the As species recoveries were between 95.2 and 97.0%. The results of the analysis were validated using mass balance by comparing the sum of extracted As with the total concentration of As in the corresponding samples. The method was successfully applied to determine the presence of these compounds in feed samples. ASA was the only As species detected in chicken feed samples, with a concentration between 0.72 and 12.91mgkg^-1.

Inorganic Arsenic Determination in Food: A Review of Analytical Proposals and Quality Assessment Over the Last Six Years

Here we review recent developments in analytical proposals for the assessment of inorganic arsenic (iAs) content in food products. Interest in the determination of iAs in products for human consumption such as food commodities, wine, and seaweed among others is fueled by the wide recognition of its toxic effects on humans, even at low concentrations. Currently, the need for robust and reliable analytical methods is recognized by various international safety and health agencies, and by organizations in charge of establishing acceptable tolerance levels of iAs in food. This review summarizes the state of the art of analytical methods while highlighting tools for the assessment of quality assessment of the results, such as the production and evaluation of certified reference materials (CRMs) and the availability of specific proficiency testing (PT) programmes. Because the number of studies dedicated to the subject of this review has increased considerably over recent years, the sources consulted and cited here are limited to those from 2010 to the end of 2015.

Arsenic Species in Chicken Breast: Temporal Variations of Metabolites, Elimination Kinetics, and Residual Concentrations

BACKGROUND

Chicken meat has the highest per capita consumption among all meat types in North America. The practice of feeding 3-nitro-4-hydroxyphenylarsonic acid (Roxarsone, Rox) to chickens lasted for more than 60 years. However, the fate of Rox and arsenic metabolites remaining in chicken are poorly understood.

OBJECTIVES

We aimed to determine the elimination of Rox and metabolites from chickens and quantify the remaining arsenic species in chicken meat, providing necessary information for meaningful exposure assessment.

METHODS

We have conducted a 35-day feeding experiment involving 1,600 chickens, of which half were control and the other half were fed a Rox-supplemented diet for the first 28 days and then a Rox-free diet for the final 7 days. We quantified the concentrations of individual arsenic species in the breast meat of 229 chickens.

RESULTS

Rox, arsenobetaine, arsenite, monomethylarsonic acid, dimethylarsinic acid, and a new arsenic metabolite, were detected in breast meat from chickens fed Rox. The concentrations of arsenic species, except arsenobetaine, were significantly higher in the Rox-fed than in the control chickens. The half-lives of elimination of these arsenic species were 0.4-1 day. Seven days after termination of Rox feeding, the concentrations of arsenite (3.1 μg/kg), Rox (0.4 μg/kg), and a new arsenic metabolite (0.8 μg/kg) were significantly higher in the Rox-fed chickens than in the control.

CONCLUSION

Feeding of Rox to chickens increased the concentrations of five arsenic species in breast meat. Although most arsenic species were excreted rapidly when the feeding of Rox stopped, arsenic species remaining in the Rox-fed chickens were higher than the background levels.

CITATION

Liu Q, Peng H, Lu X, Zuidhof MJ, Li XF, Le XC. 2016. Arsenic species in chicken breast: temporal variations of metabolites, elimination kinetics, and residual concentrations. Environ Health Perspect 124:1174-1181; http://dx.doi.org/10.1289/ehp.1510530.

Hollow-fiber solvent bar microextraction with gas chromatography and electron capture detection determination of disinfection byproducts in water samples

A liquid-phase microextraction method that uses a hollow-fiber solvent bar microextraction technique was developed by combining gas chromatography with electron capture detection for the analysis of four trihalomethanes (chloroform, dichlorobromomethane, chlorodibromomethane, and bromoform) in drinking water. In the microextraction process, 1-octanol was used as the solvent. The technique operates in a two-phase mode with a 5 min extraction time, a 700 rpm stirring speed, a 30°C extraction temperature, and NaCl concentration of 20%. After microextraction, one edge of the membrane was cut, and 1 μL of solvent was collected from the membrane using a 10 μL syringe. The solvent sample was directly injected into the gas chromatograph. The analytical characteristics of the developed method were as follows: detection limits, 0.017-0.037 ng mL^-1 ; linear working range, 10-900 ng mL^-1 ; recovery, 74 ± 9-91 ± 2; relative standard deviation, 5.7-10.3; and enrichment factor, 330-455. A simple, fast, economic, selective, and efficient method with big possibilities for automation was developed with a potential use to apply with other matrices and analytes.

Selectively adsorptive extraction of phenylarsonic acids in chicken tissue by carboxymethyl α-cyclodextrin immobilized Fe3O4 magnetic nanoparticles followed ultra performance liquid chromatography coupled tandem mass spectrometry detection

Carboxymethyl α-cyclodextrin immobilized Fe₃O₄ magnetic nanoparticles (CM-α-CD-Fe₃O₄) were synthesized for the selectively adsorptive extraction of five phenylarsonic acids including p-amino phenylarsonic acid, p-nitro phenylarsonic acid, p-hydroxy phenylarsonic acid, p-acylamino phenylarsonic acid and p-hydroxy-3-nitro phenylarsonic acid in chicken tissue. Using ultra performance liquid chromatography coupled with tandem mass spectrometry (UPLC-MS/MS), a highly sensitive analytical method was proposed for the determination of five phenylarsonic acids. It was shown that CM-α-CD-Fe₃O₄ could extract the five phenylarsonic acids in complex chicken tissue samples with high extraction efficiency. Under the optimal conditions, a high enrichment factor, ranging from 349 to 606 fold, was obtained. The limits of detection (LODs) (at a signal-to-noise ratio of 3) were in the range of 0.05–0.11 µg/kg for the five phenylarsonic acids. The proposed method was applied for the determination of five target phenylarsonic acids in chicken muscle and liver samples. Recoveries for the spiked samples with 0.2 µg/kg, 2.0 µg/kg and 20 µg/kg of each phenylarsonic acids were in the range of 77.2%–110.2%, with a relative standard deviation (RSD) of less than 12.5%.

Stir bar sorptive extraction: recent applications, limitations and future trends

Stir bar sorptive extraction (SBSE) has generated growing interest due to its high effectiveness for the extraction of non-polar and medium-polarity compounds from liquid samples or liquid extracts. In particular, in recent years, a large amount of new analytical applications of SBSE has been proposed for the extraction of natural compounds, pollutants and other organic compounds in foods, biological samples, environmental matrices and pharmaceutical products. The present review summarizes and discusses the theory behind SBSE and the most recent developments concerning its effectiveness. In addition, the main results of recent analytical approaches and their applications, published in the last three years, are described. The advantages, limitations and disadvantages of SBSE are described and an overview of future trends and novel extraction sorbents and supports is given.

Determination of hyperoside and isoquercitrin in rat plasma by membrane-protected micro-solid-phase extraction with high-performance liquid chromatography

A novel method, micro-solid-phase extraction based on membrane-protected molecularly imprinted polymer, was developed to extract hyperoside and isoquercitrin in rat plasma. Synthesized hyperoside MIPs were packed in a porous polyether sulfone membrane envelope to perform extraction. The parameters sorbent materials, membrane types, extraction time and desorption conditions were optimized for micro-solid-phase extraction. Under the optimal conditions, correlation coefficients, 0.998 and 0.999, were obtained for hyperoside and isoquercitrin, respectively, with the linear range between 1 and 120 μg/mL. The absolute extraction recoveries from 84.5 to 89.3% were found. The method detection limits of hyperoside and isoquercitrin were 0.24 and 0.22 μg/mL, respectively. Compared with traditional methods, solid-phase extraction, liquid-liquid extraction and protein precipitation, the developed method was simple, highly efficient for extraction, environmentally friendly, and particularly suitable for complex biological samples.