Preparation of Fe3O4@C@PANI magnetic microspheres for the extraction and analysis of phenolic compounds in water samples by gas chromatography–mass spectrometry

A Luminescent Cd-MOF Used as a Chemosensor for High-Efficiency Sensing of Fe3+, Cr(IV), Trinitrophenol, and Colchicine

A Cd-MOF was constructed based on 3,5-bis(4-carboxyphenyl) pyridine under solvothermal conditions. Its structure and phase purity were verified by single-crystal X-ray diffraction. Thereafter, some studies on the morphology, structure, and luminescent properties of the compound were carried out. The compound exhibited a highly sensitive response to Fe3+, Cr(IV), trinitrophenol (TNP), and colchicine based on the fluorescence-quenching mechanism. The possible mechanism of luminescence quenching was discussed in detail.

A Review on Recent Trends and Future Developments in Electrochemical Sensing

Electrochemical methods and devices have ignited prodigious interest for sensing and monitoring. The greatest challenge for science is far from meeting the expectations of consumers. Electrodes made of two-dimensional (2D) materials such as graphene, metal-organic frameworks, MXene, and transition metal dichalcogenides as well as alternative electrochemical sensing methods offer potential to improve selectivity, sensitivity, detection limit, and response time. Moreover, these advancements have accelerated the development of wearable and point-of-care electrochemical sensors, opening new possibilities and pathways for their applications. This Review presents a critical discussion of the recent developments and trends in electrochemical sensing.

Colorimetric sensor array for discriminating and determinating phenolic pollutants basing on different ratio of ligands in Cu/MOFs

The high toxicity and low biodegradability of the phenolic pollutants destroyed the balance of the environment and influenced human health seriously. Here, we developed a three-dimensional coloremetric sensor array for discriminating and determinating phenolic pollutants basing on the distinct Cu/nucleotides MOFs. Firstly, three laccase-mimic Cu/MOFs (Cu/AMP, Cu/CMP, and Cu/GMP) were obtained by regulating the molar ratio of Cu2+ and nucleotides. Then the Cu/MOFs as the recognition elements of the sensor array catalyzed the pollutants-4-AAP-H2O2 system, obtaining the colored benzoquinone products. Subsequently, the data array obtaining from the combined training matrix (3 Cu/MOFs × 6 pollutants × 5 replicates) was projected into a new dimensional space to obtain the 3D canonical scores, and classified into individual clusters by introducing LDA method. No overlap in their respective LDA plots for the six phenolic pollutants with different concentrations suggested the prominent discriminating performance of the sensor array. Furthermore, the sensor array exhibited high selectivity compared to the "lock-and-key" sensors even other active matrices coexisting in water samples. Importantly, the most influential discrimination factor was used to monitor the levels of the six targets, evidencing the potential application in assessing water pollution and maintaining human health.

Polyaniline and Polyaniline-Based Materials as Sorbents in Solid-Phase Extraction Techniques

Polyaniline (PANI) is one of the best known and widely studied conducting polymers with multiple applications and unique physicochemical properties. Due to its porous structure and relatively high surface area as well as the affinity toward many analytes related to the ability to establish different types of interactions, PANI has a great potential as a sorbent in sample pretreatment before instrumental analyses. This study provides an overview of the applications of polyaniline and polyaniline composites as sorbents in sample preparation techniques based on solid-phase extraction, including conventional solid-phase extraction (SPE) and its modifications, solid-phase microextraction (SPME), dispersive solid-phase extraction (dSPE), magnetic solid-phase extraction (MSPE) and stir-bar sorptive extraction (SBSE). The utility of PANI-based sorbents in chromatography was also summarized. It has been shown that polyaniline is willingly combined with other components and PANI-based materials may be formed in a variety of shapes. Polyaniline alone and PANI-based composites were successfully applied for sample preparation before determination of various analytes, both metal ions and organic compounds, in different matrices such as environmental samples, food, human plasma, urine, and blood.

An efficient differential sensing strategy for phenolic pollutants based on the nanozyme with polyphenol oxidase activity

To realize the efficient differential sensing of phenolic pollutants in sewage, a novel sensing strategy was successfully developed based on one nanozyme (GMP-Cu) with polyphenol oxidase activity. Phenolic pollutants can be oxidized by GMP-Cu, and the oxidation products reacts subsequently with 4-aminoantipyrine to produce a quinone-imine compound. The absorption spectra of final quinone-imine products resulted from different phenolic pollutants showed obvious differences, which were due to the interaction difference between GMP-Cu and phenolic pollutants, as well as the different molecular structures of the quinone-imine products from different phenolic pollutants. Based on the difference of absorption spectra, a novel differential sensing strategy was developed. The genetic algorithm was used to select the characteristic wavelengths at different enzymatic reaction times, HCA and PLS-DA algorithms were utilized for the discriminant sensing of seven representative phenolic pollutants, including hydroquinone, resorcinol, catechol, resorcinol, phenol, p-chlorophenol, and 2,4-dichlorophenol. Scientific wavelength selection algorithm and recognition algorithm resulted in the successful identification of phenolic pollutants in sewage with a discriminant accuracy of 100%, and differentiation of the phenolic pollutants regardless of their concentration. These results indicate that sensing strategy can be used as an effective tool for the efficient identification and differentiation of phenolic pollutants in sewage.

Sensing Methods for Hazardous Phenolic Compounds Based on Graphene and Conducting Polymers-Based Materials

It has been known for years that the phenolic compounds are able to exert harmful effects toward living organisms including humans due to their high toxicity. Living organisms were exposed to these phenolic compounds as they were released into the environment as waste products from several fast-growing industries. In this regard, tremendous efforts have been made by researchers to develop sensing methods for the detection of these phenolic compounds. Graphene and conducting polymers-based materials have arisen as a high potential sensing layer to improve the performance of the developed sensors. Henceforth, this paper reviews the existing investigations on graphene and conducting polymer-based materials incorporated with various sensors that aimed to detect hazardous phenolic compounds, i.e., phenol, 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol, 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol, and 2,4-dimethylphenol. The whole picture and up-to-date information on the graphene and conducting polymers-based sensors are arranged in systematic chronological order to provide a clearer insight in this research area. The future perspectives of this study are also included, and the development of sensing methods for hazardous phenolic compounds using graphene and conducting polymers-based materials is expected to grow more in the future.

Determination of phenols in natural and waste waters by capillary electrophoresis after preconcentration on magnetic nanoparticles coated with aminated hypercrosslinked polystyrene

An efficient sorbent for magnetic solid-phase extraction was developed from Fe₃ O₄ nanoparticles covered with aminated hypercrosslinked polystyrene. The sorbent has a saturation magnetization of 47 emu/g and a surface area of 509 mg/g and was tested for the extraction of 11 phenols from aqueous media. The optimum conditions were as follows: pH 3; adsorbent mass, 20.0 mg; adsorption time, 30 min; eluent (acetone) volume, 0.5 mL; and desorption time, 5 min. The enrichment factor after desorption reached 1595-1716 and the maximum adsorption capacity was 501-909 mg/g. Capillary electrophoresis was applied successively to separate 11 phenols after solid-phase extraction. The best separation was achieved using a fused silica capillary and borate buffer (pH 10.7) as a supporting electrolyte. After optimization, the linearity range was from 0.2 to 950 μg/L, and the limits of detection were 0.05-0.2 μg/L. The relative standard deviation varied from 6.1 to 8.7% (C = 1 μg/L) and from 2.9 to 3.5% (C = 500 μg/L). The determination of phenols is complicated in eutrophic water and spring water with a high content of humic and fulvic acids.

Recent Developments in Polymer Nanocomposite-Based Electrochemical Sensors for Detecting Environmental Pollutants

The human population is generally subjected to diverse pollutants and contaminants in the environment like those in the air, soil, foodstuffs, and drinking water. Therefore, the development of novel purification techniques and efficient detection devices for pollutants is an important challenge. To date, experts in the field have designed distinctive analytical procedures for the detection of pollutants including gas chromatography/mass spectrometry and atomic absorption spectroscopy. While the mentioned procedures enjoy high sensitivity, they suffer from being laborious, expensive, require advanced skills for operation, and are inconvenient to deploy as a result of their massive size. Therefore, in response to the above-mentioned limitations, electrochemical sensors are being developed that enjoy robustness, selectivity, sensitivity, and real-time measurements. Considerable advancements in nanomaterials-based electrochemical sensor platforms have helped to generate new technologies to ensure environmental and human safety. Recently, investigators have expanded considerable effort to utilize polymer nanocomposites for building the electrochemical sensors in view of their promising features such as very good electrocatalytic activities, higher electrical conductivity, and effective surface area in comparison to the traditional polymers. Herein, the first section of this review briefly discusses the most important methods for polymer nanocomposites synthesis, such as in situ polymerization, direct mixing of polymer and nanofillers (melt-mixing and solution-mixing), sol-gel, and electrochemical methods. It then summarizes the current utilization of polymer nanocomposites for the preparation of electrochemical sensors as a novel approach for monitoring and detecting environmental pollutants which include heavy metal ions, pesticides, phenolic compounds, nitroaromatic compounds, nitrite, and hydrazine in different mediums. Finally, the current challenges and future directions for the polymer nanocomposites-based electrochemical sensing of environmental pollutants are outlined.

Gallic acid nanoflower immobilized membrane with peroxidase-like activity for m-cresol detection

We report fabrication of new generation nanoflowers (NFs) using gallic acid (GA) and copper (II) ions (Cu2+) acted as an organic and inorganic component, respectively with effective peroxidase mimic activities in solution and on filter membrane. Unlike the typical protein NFs synthesis mechanism, gallic acid NFs (GA-NFs) was formed via coordination reaction between carboxyl groups of GA and Cu2+. The different morphologies of the GA-NFs were acquired based upon whether the carboxyl groups in gallic acid are active or not. The peroxidase mimic activity of the GA-NFs relied on the Fenton reaction in the presence of hydrogen peroxide (H2O2) was tested towards m-cresol as a function of concentration of the GA-NFs, m-cresol, H2O2 and reaction time. Under the optimized conditions, the oxidative coupling of m-cresol with 4-aminoantipyrine (4-AAP) was catalyzed by the GA-NFs dispersed in solution and adsorbed on filter paper to form an antipyrine dye and it was visually and spectrophotometrically recorded. The m-cresol with range of 0.05-0.5 mM was detected in 10 min and 15 min by using the GA-NFs in solution and on filter paper, respectively. We demonstrated that the NFs can be produced from non-protein molecules and GA-NFs can be used as a promising nanocatalyst for a variety of applications.

Preparation and characterization of magnetic nanomaterial and its application for removal of polycyclic aromatic hydrocarbons

Fe₃O₄@polyaniline, a Fe₃O₄-based magnetic core-shell material, was synthesized and its morphology and microstructure were characterized with transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and vibrating sample magnetometry. Polyaniline was modified onto the surface of Fe₃O₄ nanoparticles by a self-assembly method based on a two-step oxidative polymerization method. The new materials exhibited good adsorption to polycyclic aromatic hydrocarbons such as fluoranthene, pyrene and benzo[a]pyrene from environmental water samples due to the high affinities of polyaromatic hydrocarbons to polyaniline via π-π and van der Waals interactions. The experimental results indicate that the adsorption of polyaromatic hydrocarbons follows pseudo-second order kinetics and the adsorption isotherms conform to a Langmuir isotherm model. The thermodynamic parameters for polyaromatic hydrocarbons indicate that the adsorption process is spontaneous and endothermic in nature, but adsorption occurs via non-covalent interactions. This study indicated that the Fe₃O₄@polyaniline hybrid core-shell structure was proved to be a good adsorbent for polyaromatic hydrocarbons while exhibiting simple preparation, easy separation, low cost, high reusability and great potential applicability for removal of polyaromatic hydrocarbons from water.

Acetylacetone functionalized magnetic carbon microspheres for the highly-efficient adsorption of heavy metal ions from aqueous solutions

Herein, Acac-C@Fe₃O₄, a magnetic carbon (C@Fe₃O₄) modified with acetylacetone (Acac), was first prepared and used as a solid-phase adsorbent for adsorbing some heavy metal ions from aqueous solution. The adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), vibrating sample magnetometry (VSM) and BET studies. Some parameters affecting the adsorption and desorption processes were studied in Pb²⁺ solution, including sample pH, contact time, initial concentration, type and connection of the desorption solution. Absorption results showed that removal of Pb²⁺ was 100% under optimal conditions at an initial concentration of 10.0 mg L⁻¹. The adsorption mechanism conformed well to a pseudo-second order kinetic model. The adsorption capacity of the sorbent also showed promising results with Hg²⁺, Cr³⁺, Fe²⁺, Cd²⁺, Mn²⁺, Zn²⁺, Cu²⁺ and Pb²⁺, where maximum adsorption capacities reached 98.0, 151.2, 188.9, 202.2, 286.3, 297.2, 305.1 and 345.3 mg g⁻¹, respectively. The Acac-C@Fe₃O₄ microsphere material was successfully applied to the adsorption of heavy metal ions in aqueous solution.

Herein, Acac-C@Fe₃O₄, a magnetic carbon (C@Fe₃O₄) modified with acetylacetone (Acac), was first prepared and used as a solid-phase adsorbent for adsorbing some heavy metal ions from aqueous solution.

Current advancements of magnetic nanoparticles in adsorption and degradation of organic pollutants

Nanotechnology is a fast-emerging field and has received applications in almost every field of life. Exploration of new synthetic technologies for size and shape control of nanomaterials is getting immense consideration owing to their exceptional properties and applications. Magnetic nanoparticles (MNPs) are among the most important group of nanoparticles thanks to their diverse applications in medical, electronic, environmental, and industrial sectors. There have been numerous synthetic routes of MNPs including thermal decomposition, co-precipitation, microemulsion, microwave assisted, chemical vapor deposition, combustion synthesis, and laser pyrolysis synthesis. The synthesized MNPs have been successfully applied in medical fields for therapy, bioimaging, drug delivery, and so on. Among environmental aspects, there has been great intimidation of organic pollutants in air and water. Utilization of various wastes as adsorbents has removed 80 to 99.9% of pollutants from contaminated water. MNPs as adsorbents compared to coarse-grained counterparts have seven times higher capacity in removing water pollutants and degrading organic contaminants. This study is focused to introduce and compile various routes of MNP synthesis together with their significant role in water purifications and degradation of organic compounds. The review has compiled recent investigation, and we hope it will find the interest of researchers dealing with nanoparticles and environmental research. Graphical abstract Synthesis and applications of magnetic nanoparticles.

Preparation of magnetic mesoporous carbon from polystyrene-grafted magnetic nanoparticles for rapid extraction of chlorophenols from water samples

A magnetic mesoporous carbon material (Fe₃O₄@C) was fabricated by carbonizing polystyrene grafted polydopamine-coated magnetic nanoparticles.

Enrichment of serum biomarkers by magnetic metal-organic framework composites

Highly efficient extraction of peptides from serum is critical for finding serum biomarkers using mass spectrometry, which still remains a great challenge. Currently, a bottom-up proteomics approach has been applied to discover serum biomarkers. However, the approach was labor intensive, time and cost consuming, and cannot meet the requirements for clinical application. In this work, Fe₃O₄/C@MIL-100 composites were synthesized to efficiently capture peptides from microwave-assisted formic acid digests of BSA and human serum prior to MALDI-TOF MS analysis. Fe₃O₄/C@MIL-100 composites exhibited size-selective adsorption performance, thus providing a rapid and convenient approach to enrich low-abundance peptides. Notably, the peptides' mass fingerprinting of serum digestions between type 2 diabetes mellitus (T2DM) and healthy persons were distinguishable, which indicated the potential ability of this technique for T2DM diagnosis and rapid biomarker discovery. Graphical Abstract Efficient extraction and identification of serum biomarkers using Fe₃O₄/C@MIL-100 composites from acid hydrolysate.

Polythiophene-Chitosan Magnetic Nanocomposite as a Highly Efficient Medium for Isolation of Fluoxetine from Aqueous and Biological Samples

Polythiophene/chitosan magnetic nanocomposite as an adsorbent of magnetic solid phase extraction was proposed for the isolation of fluoxetine in aqueous and biological samples prior to fluorescence detection at 246 nm. The synthesized nanoparticles, chitosan and polythiophene magnetic nanocomposite, were characterized by scanning electron microscopy, FT-IR, TGA, and EDAX. The separation of the target analyte from the aqueous solution containing the fluoxetine and polythiophene/chitosan magnetic nanocomposite was simply achieved by applying external magnetic field. The main factors affecting the extraction efficiency including desorption conditions, extraction time, ionic strength, and sample solution pH were optimized. The optimum extraction conditions were obtained as 10 min for extraction time, 25 mg for sorbent amount, 50 mL for initial sample volume, methanol as desorption solvent, 1.5 mL for desorption solvent volume, 3 min for desorption time, and being without salt addition. Under the optimum conditions, good linearity was obtained within the range of 15-1000 μg L(-1) for fluoxetine, with correlation coefficients 0.9994. Furthermore, the method was successfully applied to the determination of fluoxetine in urine and human blood plasma samples. Compared with other methods, the current method is characterized with highly easy, fast separation and low detection limits.

Extraction of phenolic compounds from water samples by dispersive micro-solid-phase extraction

In this article, the use of magnetically separable sorbent polyaniline/silica-coated nickel nanoparticles is evaluated under a dispersive micro-solid-phase extraction approach for the extraction of phenolic compounds from water samples. The sorbent was prepared by in situ chemical polymerization of aniline on the surface of silica-modified nickel nanoparticles and was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectrometry, and vibrating sample magnetometry. Effective variables such as amount of sorbent (milligrams), pH and ionic strength of sample solution, volume of eluent solvent (microliters), vortex, and ultrasonic times (minutes) were investigated by fractional factorial design. The significant variables optimized by a Box-Behnken design were combined by a desirability function. Under the optimized conditions, the calibration graphs of analytes were linear in a concentration range of 0.02-100 μg/mL, and with correlation coefficients more than 0.999. The limits of detection and quantification were in the ranges of 10-23 and 33-77 μg/L, respectively. This procedure was successfully employed in the determination of target analytes in spiked water samples; the relative mean recoveries ranged from 96 to 105%.

Superhydrophobic magnetic nanoparticle-free fatty acid regenerated from waste cooking oil for the enrichment of carcinogenic polycyclic aromatic hydrocarbons in sewage sludges and landfill leachates

In this study, Fe₃O₄ nanoparticles grafted with superhydrophobic free fatty acids from waste cooking oil (FFA@MNP) were successfully fabricated as an adsorbent for the magnetic solid phase extraction (MSPE) technique.

A novel ratiometric dual-emission fluorescence magnetic nanohybrid for HIgG immunoassay

The proposed ratiometric dual-emission (carbon dots and QDs) fluorescence magnetic nanohybrid displayed excellent analytical performance for the detection of HIgG.

Ionic liquid-coated Fe3O4/APTES/graphene oxide nanocomposites: synthesis, characterization and evaluation in protein extraction processes

A magnetic solid-phase extraction (MSPE) procedure with ionic liquid (IL) coated 3-aminopropyltriethoxysilane (APTES)-Fe₃O₄ grafted graphene oxide (GO) nanocomposite (Fe₃O₄/APTES/GO/IL) as adsorbent has been developed for protein extraction.

Magnetic solid-phase extraction based on modified ferum oxides for enrichment, preconcentration, and isolation of pesticides and selected pollutants

Recently, a simple, rapid, high-efficiency, selective, and sensitive method for isolation, preconcentration, and enrichment of analytes has been developed. This new method of sample handling is based on ferum oxides as magnetic nanoparticles (MNPs) and has been used for magnetic solid-phase extraction (MSPE) of various analytes from various matrices. This review focuses on the applications of modified ferum oxides, especially modified Fe3O4 MNPs, as MSPE adsorbent for pesticide isolation from various matrices. Further perspectives on MSPE based on modified Fe3O4 for inorganic metal ions, organic compounds, and biological species from water samples are also presented. Ferum(III) oxide MNPs (Fe2O3) are also highlighted.

Formation of An Ionic PTCA-β-CDNH2 Complex and Its Application for Phenol Sensing in Aqueous Phase

On the basis of proton transfer in aqueous phase, we prepared a water-soluble and highly fluorescent ionic complex of 3,4,9,10-perylene tetracarboxylic acid (PTCA) and 6-deoxy-6-amino-β-CD (β-CDNH2) and studied its fluorescence behavior. It was found that the fluorescence emission of the complex is sensitive and selective to the presence of trace amount of toxic phenolic compounds, in particular phenol, which is crucial for water quality control. The detection limit (DL) of the method to the analyte is ~0.03 μM, a lowest value reported in literatures for similar techniques. Interestingly, the detection at an unprecedented subnanogram (DL, ~0.12 ng/cm(2)) level can also be conducted in a visualized manner, which may provide a simple and low-cost protocol for on-site and real-time detection of the analyte. Moreover, the complex is humidity sensitive in dry state, and its color changes from bright yellow to bright green when exposed to wet vapor. Unlike other PTCA bisimide derivatives, preparation of the ionic complex of PTCA/β-CDNH2 is simple and avoids complicated synthetic burden. Furthermore, introduction of methanol into the aqueous solution of the complex resulted in aggregation as indicated by solution color change and proved by transmission electron microscopy and dynamic light scattering studies, which explains why the compound in dry state is sensitive to the presence of water and water vapor. X-ray diffraction, UV-vis, and fluorescence studies uncovered the H-packing nature of the structure of the aggregate.

Coextraction of acidic, basic and amphiprotic pollutants using multiwalled carbon nanotubes/magnetite nanoparticles@polypyrrole composite

The simultaneous extraction of acidic, basic and amphiprotic pollutants from various samples is a considerable and disputable concept in sample preparation strategies. In this study, for the first time, coextraction of acidic, basic and amphiprotic pollutants (polar and apolar) with multiwalled carbon nanotubes/Fe3O4@polypyrrole (MWCNTs/Fe3O4@PPy) composite based dispersive micro-solid phase extraction followed by high performance liquid chromatography-photo diode array detection was introduced. Firstly, the extraction efficiency of various magnetic nanosorbents including Fe3O4, MWCNTs/Fe3O4, graphene oxide/Fe3O4 (GO/Fe3O4), Fe3O4@PPy, MWCNTs/Fe3O4@PPy and GO/Fe3O4@PPy were compared. The results revealed that MWCNTs/Fe3O4@PPy nanocomposite has higher extraction efficiency for five selected model analytes (4-nitrophenol, 3-nitroaniline, 2,4-dichloroaniline, 3,4-dichloroaniline and 1-amino-2-naphthol). Box-Behnken design methodology combined with desirability function approach was applied to find out the optimal experimental conditions. The opted conditions were: pH of the sample, 8.2; sorbent amount, 12 mg; sorption time, 5.5 min; salt concentration, 14% w/w; type and volume of the eluent, 120 μL acetonitrile; elution time; 2 min. Under the optimum conditions detection limits and linear dynamic ranges were achieved in the range of 0.1-0.25 μg L(-1) and 0.5-600 μg L(-1), respectively. The percent of extraction recovery and relative standard deviations (n=5) were in the range of 45.6-82.2 and 4.0-8.5, respectively. Ultimately, the applicability of this method was successfully confirmed by analyzing rain, snow and river water samples and satisfactory results were obtained.