Thin-film octadecyl-silica glass coating for automated 96-blade solid-phase microextraction coupled with liquid chromatography-tandem mass spectrometry for analysis of benzodiazepines

Benzodiazepines in complex biological matrices: Recent updates on pretreatment and detection methods

Benzodiazepines (BDZs) are used in clinics for anxiolysis, anticonvulsants, sedative hypnosis, and muscle relaxation. They have high consumptions worldwide because of their easy availability and potential addiction. They are often used for suicide or criminal practices such as abduction and drug-facilitated sexual assault. The pharmacological effects of using small doses of BDZs and their detections from complex biological matrices are challenging. Efficient pretreatment methods followed by accurate and sensitive detections are necessary. Herein, pretreatment methods for the extraction, enrichment, and preconcentration of BDZs as well as the strategies for their screening, identification, and quantitation developed in the past five years have been reviewed. Moreover, recent advances in various methods are summarized. Characteristics and advantages of each method are encompassed. Future directions of the pretreatment and detection methods for BDZs are also reviewed.

Modifying current thin-film microextraction (TFME) solutions for analyzing prohibited substances: Evaluating new coatings using liquid chromatography

For identifying and quantifying prohibited substances, solid-phase microextraction (SPME) continues to arouse interest as a sample preparation method. However, the practical implementation of this method in routine laboratory testing is currently hindered by the limited number of coatings compatible with the ubiquitous high-performance liquid chromatography (HPLC) systems. Only octadecyl (C18) and polydimethylsiloxane/divinylbenzene ligands are currently marketed for this purpose. To address this situation, the present study evaluated 12 HPLC-compatible coatings, including several chemistries not currently used in this application. The stationary phases of SPME devices in the geometry of thin film-coated blades were prepared by applying silica particles bonded with various functional ligands (C18, octyl, phenyl-hexyl, 3-cyanopropyl, benzenesulfonic acid, and selected combinations of these), as well as unbonded silica, to a metal support. Most of these chemistries have not been previously used as microextraction coatings. The 48 most commonly misused substances were selected to assess the extraction efficacy of each coating, and eight desorption solvent compositions were used to optimize the desorption conditions. All samples were analyzed using an HPLC system coupled with triple quadrupole tandem mass spectrometry. This evaluation enables selection of the best-performing coatings for quantifying prohibited substances and investigates the relationship between extraction efficacy and the physicochemical characteristics of the analytes. Ultimately, using the most suitable coatings is essential for trace-level analysis of chemically diverse prohibited substances.

Trace-level monitoring of anti-cancer drug residues in wastewater and biological samples by thin-film solid-phase micro-extraction using electrospun polyfam/Co-MOF-74 composite nanofibers prior to liquid chromatography analysis

Sample preparation methods with high accuracy and matrix resistance will benefit the quick analysis of desired analytes in an intricate matrix, such as the monitoring of drug samples in biofluids. Herein, an electrospun composite, consisting of polyfam and a Co-metal organic framework- 74, was developed as a novel sorbent for the high-throughput solid-phase micro-extraction of certain anti-cancer drugs (sorafenib, dasatinib, and erlotinib hydrochloride) from wastewater and biological samples before high-performance liquid chromatography- ultraviolet analysis (HPLC-UV). The synthesis of the resulting composite nanofibers was confirmed using the techniques of Fourier transform-infrared spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and powder X-ray diffraction (XRD). FESEM images illustrated irregular and bead-free nanofibers with a diameter range of 126.9-269.6 nm. Thanks to the incorporation of Co-MOF-74 into the polyfam network, the electrospun nanofibers displayed a large surface area, high porosity, and significant extraction efficiency toward target analytes. Under optimal experimental conditions, the linearity was achieved in the range of 0.1-1500.0 µg L^-1 for sorafenib and 0.5-1500.0 µg L^-1 for dasatinib and erlotinib hydrochloride, with a coefficient of determination of ≥0.9996. The detection limits (LODs) were calculated within the range of 0.03-0.20 µg L^-1. The relative standard deviation values (RSDs %) were in the range of 3.1%-8.6% (intra-day, n = 6) and 7.0%-10.3% (inter-day, n=3) in the span of three days. Ultimately, the application of the developed method was appraised for the quantification of trace amounts of the intended analytes in various spiked samples.

Benefits of Innovative and Fully Water-Compatible Stationary Phases of Thin-Film Microextraction (TFME) Blades

Octadecyl (C₁₈) groups are arguably the most popular ligands used for preparation of solid phase microextraction (SPME) devices. However, conventional C₁₈-bonded silica particles are not fully compatible with the nearly 100% aqueous composition of typical biological samples (e.g., plasma, saliva, or urine). This study presents the first evaluation of thin-film SPME devices coated with special water-compatible C₁₈-bonded particles. Device performance was assessed by extracting a mixture of 30 model compounds that exhibited various chemical structures and properties, such as hydrophobicity. Additionally, nine unique compositions of desorption solvents were tested. Thin-film SPME devices coated with C₁₈-bonded silica particles with polar end-capping groups (10 µm) were compared with conventional trimethylsilane end-capped C₁₈-bonded silica particles of various sizes (5, 10, and 45 µm) and characteristics. Polar end-capped particles provided the best extraction efficacy and were characterized by the strongest correlations between the efficacy of the extraction process and the hydrophobicity of the analytes. The results suggest that the original features of octadecyl ligands are best preserved in aqueous conditions by polar end-capped particles, unlike with conventional trimethylsilane end-capped particles that are currently used to prepare SPME devices. The benefits associated with this improved type of coating encourage further implementation of microextractraction as greener alternative to the traditional sample preparation methods.

Calcium/Copper Alginate Framework Doped with CuO Nanoparticles as a Novel Adsorbent for Micro-extraction of Benzodiazepines from Human Serum

Background:

Sample preparation is one of the most challenging phases in pharmaceutical analysis, especially in biological matrices, affecting the whole analytical methodology.

Objective:

In this study, a new Ca(II)/Cu(II)/alginate/CuO Nanoparticles Hydrogel Fiber (CCACHF) was synthesized through a simple, green procedure and applied for fiber micro solid-phase extraction (FMSPE) of diazepam (DIZ) and oxazepam (OXZ) as model drugs prior to high-performance liquid chromatography-UV detection (HPLC-UV).

Methods:

Composition and morphology of the prepared fiber were characterized and the effect of main parameters on the fiber fabrication and extraction efficiency have been studied and optimized.

Results:

In optimal conditions, calibration curves were linear, ranging between 0.1–500 μg L−1 with regression coefficients of 0.9938 and 0.9968. Limit of Detection (LOD) (S/N=3) and Limit of Quantification (LOQ) (S/N=10) of the technique for DIZ and OXZ were 0.03 to 0.1 μg L−1. Within-day and between-day Relative Standard Deviations (RSDs) for DIZ and OXZ were 6.0–12.5% and 3.3–9.4%, respectively.

Conclusion:

The fabricated adsorbent has been substantially employed to the extraction of selected benzo-diazepines (BZDs) from human serum real specimens and the obtained recoveries were also satisfactory (82.1-109.7%).

Applications of porous frameworks in solid-phase microextraction

Porous frameworks are a term of attracting solid materials assembled by interconnection of molecules and ions. These trendy materials due to high chemical and thermal stability, well-defined pore size and structure, and high effective surface area gained attention to employ as extraction phase in sample pretreatment methods before analytical analysis. Solid-phase microextraction is an important subclass of sample preparation technique that up to now different configurations of this method have been introduced to get adaptable with different environments and analytical instruments. In this review, theoretical aspect and different modes of solid-phase microextraction method are investigated. Different classes of porous frameworks and their applications as extraction phase in the proposed microextraction method are evaluated. Types and features of supporting substrates and coating procedures of porous frameworks on them are reviewed. At the end, the prospective and the challenges ahead in this field are discussed.

Bract as a novel extraction phase in thin-film SPME combined with 96-well plate system for the high-throughput determination of estrogens in human urine by liquid chromatography coupled to fluorescence detection

In this study, an environmentally friendly and high-throughput method was developed for the determination of estrone (E1), 17β-estradiol (E2), 17α-ethinylestradiol (EE2) and estriol (E3) in human urine by liquid chromatography-fluorescence detector (HPLC-FLD). A biosorbent (bract) was proposed as extraction phase for Thin-Film SPME combined with 96-well system. The characterization of the biosorbent was performed by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The optimizations were carried out through univariate and multivariate approaches with optimal conditions comprised of urine samples diluted 40-fold, liquid desorption performed in methanol and addition of 20% (w/v) of NaCl in the sample. Considering an extraction/desorption cycle using the 96-well plate system, the sample preparation time was 1.7 min per sample, which contributes to the high-throughput of the method proposed. The analytical parameters of merit were determined and satisfactory results were achieved, including limits of detection ranging from 0.3 μg L^-1 for estradiol to 3 μg L^-1 for estrone, while limits of quantification varied from 1 μg L^-1 for estradiol to 10 μg L^-1 for estrone. The correlation coefficients ranged from 0.9947 for estrone to 0.9999 for estriol. The accuracy and intra-assay and intermediate precisions (RSD) were evaluated through extractions in diluted urine samples (40-fold) spiked with each analyte (1, 200 and 400 μg L^-1 for E3; 0.1, 200 and 400 μg L^-1 for E2; 0.5, 200 and 400 μg L^-1 for EE2 and 10, 200 and 400 μg L^-1 for E1). The relative recoveries (n = 3) ranged from 71 to 105%, intra-assay precision (n = 3) varied from 1 to 17% and intermediate precision (n = 9) ranged from 2 to 19%. The method developed can be successfully used for the quantification of estrogens in human urine samples.

A new restricted access molecularly imprinted fiber for direct solid phase microextraction of benzodiazepines from plasma samples

Restricted access molecularly imprinted polymers (RAMIPs) are hybrid materials that present selective binding sites for a template (or similar molecules), and an external hydrophilic layer that avoids the binding of proteins to the material, making them appropriate for the sample preparation of protein fluids.

Microwave-assisted extraction and high-throughput monolithic-polymer-based micro-solid-phase extraction of organophosphorus, triazole, and organochlorine residues in apple

A high-throughput micro-solid-phase extraction device based on a 96-well plate was constructed and applied to the determination of pesticide residues in various apple samples. Butyl methacrylate and ethylene glycol dimethacrylate were copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless-steel meshes of 96-micro-solid-phase extraction device and used as an extracting unit. Before the micro-solid-phase extraction, microwave-assisted extraction was employed to facilitate the transfer of the pesticide residues from the apple matrix to liquid media. Then, 1 mL of the aquatic samples was transferred into the 96-well plate and the 96-micro-solid-phase extraction device was applied for the extraction of the selected pesticides. Influential parameters, such as sorbent-to-sorbent reproducibility, microwave-assisted extraction time, ionic strength and micro-solid-phase extraction time, were optimized. The limits of quantitation were below 120 μg/kg, which are lower than the maximum residue limits. The developed method was successfully implemented for the extraction and determination of the selected pesticides from 20 different apple samples gathered from local markets. Phosalone was identified and quantified at the concentration level of 147 (±16.4) μg/kg in one of the samples.

SPME techniques for biomedical analysis

Biomedical analyses of drugs and their metabolites are important in new drug development, therapeutic drug monitoring and forensic toxicology. In these analyses, sample preparation is very important to isolate target compounds from complex biological matrices and markedly influences the reliability and accuracy of determination. SPME is a simple and convenient sample preparation technique that has enabled automation, miniaturization and high-throughput performance. This article focuses on current developments, their biomedical applications and future trends with emphasis on new extraction devices using selective polymer coating materials in novel SPME techniques, including fiber SPME, in-tube SPME and related techniques.

Sample preparation with solid phase microextraction and exhaustive extraction approaches: Comparison for challenging cases

In chemical analysis, sample preparation is frequently considered the bottleneck of the entire analytical method. The success of the final method strongly depends on understanding the entire process of analysis of a particular type of analyte in a sample, namely: the physicochemical properties of the analytes (solubility, volatility, polarity etc.), the environmental conditions, and the matrix components of the sample. Various sample preparation strategies have been developed based on exhaustive or non-exhaustive extraction of analytes from matrices. Undoubtedly, amongst all sample preparation approaches, liquid extraction, including liquid-liquid (LLE) and solid phase extraction (SPE), are the most well-known, widely used, and commonly accepted methods by many international organizations and accredited laboratories. Both methods are well documented and there are many well defined procedures, which make them, at first sight, the methods of choice. However, many challenging tasks, such as complex matrix applications, on-site and in vivo applications, and determination of matrix-bound and free concentrations of analytes, are not easily attainable with these classical approaches for sample preparation. In the last two decades, the introduction of solid phase microextraction (SPME) has brought significant progress in the sample preparation area by facilitating on-site and in vivo applications, time weighted average (TWA) and instantaneous concentration determinations. Recently introduced matrix compatible coatings for SPME facilitate direct extraction from complex matrices and fill the gap in direct sampling from challenging matrices. Following introduction of SPME, numerous other microextraction approaches evolved to address limitations of the above mentioned techniques. There is not a single method that can be considered as a universal solution for sample preparation. This review aims to show the main advantages and limitations of the above mentioned sample preparation approaches and the applicability and capability of each technique for challenging cases such as complex matrices, on-site applications and automation.

Recent advances in unique sample preparation techniques for bioanalysis

The extraction and/or purification of drugs and medicines from biological matrices are important objectives in investigating their toxicological and pharmaceutical properties. Many widely used methods such as liquid–liquid extraction or SPE, used for extracting, purifying and enriching drugs and medicines found in biological materials, involve laborious, intensive and expensive preparatory procedures, and they require organic solvents that are toxic to both humans and the environment. Recent trends are focused on miniaturization, high-throughput and automation techniques. All the advantages and disadvantages of these techniques and devices in biological analysis are presented, and their applications in the extraction and/or purification of drugs and medicines from biological matrices are discussed in this review.

Stir-membrane liquid microextraction for the determination of paracetamol in human saliva samples

Background: In this article, stir-membrane liquid microextraction is adapted for the analysis of volume-limited biological samples, using as a model analytical problem the determination of paracetamol in human saliva by LC with UV. A three-phase microextraction mode is used for the extraction of the target analyte, taking advantage of its acid–base properties. Results: All the variables involved in the extraction have been studied and optimized in depth. The method has been analytically characterized on the basis of its linearity, sensitivity and precision. The LOD is 0.5 µg/l while the repeatability, expressed as RSD, is better than 14.2 %. A tenfold preconcentration factor was obtained, which involves an absolute recovery value of 25%. Moreover, the relative recovery is very close to the 100%. Conclusion: Finally, the proposed method has been used to perform a PK study of paracetamol.