Fiber-in-tube solid-phase microextraction with molecularly imprinted coating for sensitive analysis of antibiotic drugs by high performance liquid chromatography

Developments and Applications of Molecularly Imprinted Polymer-Based In-Tube Solid Phase Microextraction Technique for Efficient Sample Preparation

Despite advancements in the sensitivity and performance of analytical instruments, sample preparation remains a bottleneck in the analytical process. Currently, solid-phase extraction is more widely used than traditional organic solvent extraction due to its ease of use and lower solvent requirements. Moreover, various microextraction techniques such as micro solid-phase extraction, dispersive micro solid-phase extraction, solid-phase microextraction, stir bar sorptive extraction, liquid-phase microextraction, and magnetic bead extraction have been developed to minimize sample size, reduce solvent usage, and enable automation. Among these, in-tube solid-phase microextraction (IT-SPME) using capillaries as extraction devices has gained attention as an advanced "green extraction technique" that combines miniaturization, on-line automation, and reduced solvent consumption. Capillary tubes in IT-SPME are categorized into configurations: inner-wall-coated, particle-packed, fiber-packed, and rod monolith, operating either in a draw/eject system or a flow-through system. Additionally, the developments of novel adsorbents such as monoliths, ionic liquids, restricted-access materials, molecularly imprinted polymers (MIPs), graphene, carbon nanotubes, inorganic nanoparticles, and organometallic frameworks have improved extraction efficiency and selectivity. MIPs, in particular, are stable, custom-made polymers with molecular recognition capabilities formed during synthesis, making them exceptional "smart adsorbents" for selective sample preparation. The MIP fabrication process involves three main stages: pre-arrangement for recognition capability, polymerization, and template removal. After forming the template-monomer complex, polymerization creates a polymer network where the template molecules are anchored, and the final step involves removing the template to produce an MIP with cavities complementary to the template molecules. This review is the first paper to focus on advanced MIP-based IT-SPME, which integrates the selectivity of MIPs into efficient IT-SPME, and summarizes its recent developments and applications.

Flower-like calix[6]arene-based covalent organic framework for membrane extraction of sulfonamides in animal-derived food through host-guest interaction prior to determination with ultra-high performance liquid chromatography-tandem mass spectrometry

Supramolecular macrocycle-based covalent organic frameworks (COFs) are promising adsorbents for adsorption of hazards due to their host-guest recognition property. However, most supramolecular macrocycles are conformationally flexible, making them challenging to introduce into COFs. In this work, a calix[6]arene-based COF (CX6-BD COF) was fabricated with a unique flower-like morphology and high crystallinity. Especially, the cavity of CX6 exhibited host-guest inclusion interaction for sulfonamides (SAs), which was verified by quantum chemistry calculation. The integration of the porosity of COFs with the recognition cavity of CX6 made CX6-BD COF display excellent enrichment performance for SAs, with good enrichment factors (EFs) between 77 and 96. The material was employed as an adsorbent for COF membrane filter extraction, coupled with ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) to simultaneously enrich and determine seven SAs in animal-derived food. The analytical method showed a wide linear range (0.01-100 µg/L and 0.05-100 µg/L) and low detection limits (3-10 ng/L). The established method was successfully applied to sensitively determine SAs in chicken, pork and beef samples, which achieved satisfactory recoveries (73.8-113%). These results demonstrated CX6-BD COF has good application potential in determination of trace and ultra-trace SAs in complex food matrices as an adsorbent.

Bio-Inspired Imprinting Materials for Biomedical Applications

Inspired by the recognition mechanism of biological molecules, molecular imprinting techniques (MITs) are imparted with numerous merits like excellent stability, recognition specificity, adsorption properties, and easy synthesis processes, and thus broaden the avenues for convenient fabrication protocol of bio-inspired molecularly imprinted polymers (MIPs) with desirable functions to satisfy the extensive demands of biomedical applications. Herein, the recent research progress made with respect to bio-inspired imprinting materials is discussed in this review. First, the underlying mechanism and basic components of a typical molecular imprinting procedure are briefly explored. Then, emphasis is put on the introduction of diverse MITs and novel bio-inspired imprinting materials. Following these two sections, practical applications of MIPs in the field of biomedical science are focused on. Last but not least, perspectives on the remaining challenges and future development of bio-inspired imprinting materials are presented.

Dummy template based molecularly imprinted solid-phase microextraction coating for analysis of trace disinfection by-product of 2,6-dichloro-1,4-benzoquinone using high-performance liquid chromatography

Trace disinfection by-products (DBPs) produced during the disinfection of drinking water are potentially carcinogenic, teratogenic and mutagenic, which has aroused much attention recently. In this study, a molecularly imprinted (MIP) solid -phase microextraction (SPME) fiber coating was prepared by an in-situ polymerization method using a dummy template molecule for the analysis of trace 2,6-dichloroindole-1,4-benzoquinone (2,6-DCBQ), a typical DBP. The characterization results suggested that this monolithic SPME fiber under the optimized conditions had the porous structure, large surface area and good thermal stability. Due to the strong structural recognition and molecular interaction between MIP SPME coating and target molecule, it showed good extraction selectivity and capacity to trace 2,6-DCBQ with an imprinting factor of 4.7. Then, coupling with high-performance liquid chromatography (HPLC)-ultraviolet (UV) detection, a sensitive analytical method for trace 2,6-DCBQ in water samples was successfully established with a detection limit down to 2.3 ng/mL. The recoveries of the proposed method were in range of 84.4-122% with the relative standard deviations of 1.0-13% (n = 3). The results showed that this MIP SPME-HPLC-UV method possessed high analytical selectivity and sensitivity for trace 2,6-DCBQ in water, which would benefit the improvement of the practicability of DBPs monitoring and detection methodology.

Innovative extraction materials for fiber-in-tube solid phase microextraction: A review

Fiber-in-tube solid-phase microextraction (fiber-in-tube SPME) with short capillary longitudinally packed with fine fibers as extraction device allows direct coupling to high performance liquid chromatography (HPLC) systems to determine weakly volatile or thermally labile compounds. This technique associates the advantages of miniaturized and analytical on-line systems. Major achievements include the use of different capillaries (fused-silica, copper, stainless steel, polyetheretherketone (PEEK), or poly(tetrafluoroethylene) (PTFE)) that are packed with neat fibers (Zylon®, silk, or Kevlar 29®) or fibers (stainless steel, basalt, or carbon) functionalized with selective coatings (aerogels, ionic liquids (ILs), polymeric ionic liquids (PILs), molecularly imprinted polymers (MIPs), layered double hydroxides (LDHs), or conducting polymer). This review outlines the fundamental theory and the innovative extraction materials for fiber-in-tube SPME-HPLC systems and highlights their main applications in environmental and bioanalyses.

Biomass-derived carbon nanospheres decorated by manganese oxide nanosheets, intercalated into polypyrrole, as an inside-needle capillary adsorption trap sorbent for the analysis of linear alkylbenzenes

Carbon nanospheres (CNSs) were derived hydrothermally from biomass (orange peels) and decorated by manganese dioxide (MnO₂) nanosheets. The MnO₂/CNSs nanocomposite was intercalated into polypyrrole (PPy) during flow-through in-situ electropolymerization of pyrrole on the surface of the inner wall of a stainless-steel needle to prepare an inside-needle capillary adsorption trap (INCAT) device. The surface morphology, thermogravimetric behavior, sorption characteristics, and structure of the MnO₂/CNSs@PPy nanocomposite were characterized using scanning electron microscopy (SEM), thermogravimetric analysis (TGA), energy dispersive X-ray analysis (EDX), nitrogen physisorption by the Brunauer-Emmett-Teller (BET) method, dynamic light scattering (DLS) size distribution, and Fourier-transform infrared spectrometry (FT-IR). The INCAT device was coupled with GC-FID and applied for dynamic headspace analysis of linear alkyl benzenes (LABs) in wastewater samples. The effective experimental variables on the extraction efficiency was optimized using a central composite design (CCD) based on response surface methodology (RSM). Under the optimal conditions, the limits of detection (LODs) were in the range of 0.5-1.0 ng mL^-1. The calibration plots were linear over the range of 0.01-10 μg mL^-1. The relative standard deviations (RSDs%) for intra-day, inter-day, and inter-INCAT precision were calculated 5.3-8.3%, 9.4-13.5%, and 13.6-16.9%, respectively. The developed technique was employed successfully for the analysis of LABs in water and wastewater samples with average recovery values ranging from 92 to 109%. A single INCAT device was used more than 90 times without significant change in its extraction capability.

Carbonized Aramid Fiber as the Adsorbent for In-Tube Solid-Phase Microextraction to Detect Estrogens in Water Samples

Carbonized aramid fiber was prepared as a new type of adsorbent for in-tube solid-phase microextraction. The surface structure, chemical composition, and graphitization degree of the resulted fiber was determined and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and Raman spectrometry. The prepared fiber was packed in a stainless-steel tube instead of the sample loop of a six-port and tested for the extraction of five environmental estrogen hormones coupled with high-performance liquid chromatography. Several parameters affecting the estrogens’ extraction including the sampling volume, sampling rate, NaCl content, and desorption time were investigated in detail. The extraction tube with carbonized aramid fiber exhibited remarkable extraction performance towards five estrogen targets. The analysis method was established, and it exhibited a wide linear range (0.5–10.0 μg/L) with good linearity (correlation coefficient ≥0.9906), low limits of detection (0.011–0.13 μg/L), and high enrichment factors (178–1335) for the five analytes. Relative standard deviations (n = 3) for intraday (≤4.8%) and interday (≤4.0%) tests indicated that the extraction material had satisfactory repeatability. Bisphenol A released from a polycarbonate (PC) bottle was quantitatively detected with a concentration of 8.3 μg/L. The relative recoveries spiked at 5 and 10 μg/L were investigated, and the results were in the range of 74.3–121% for real water samples.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Review: Microextraction Technique Based New Trends in Food Analysis

Food chemistry is the study and classification of the quality and origin of foods. The identification of definite biomarkers and the determination of residue contaminants such as toxins, pesticides, metals, human and veterinary drugs, which are a very common source of food-borne diseases. The food analysis is continuously demanding the improvement of more robust, sensitive, highly efficient, and economically beneficial analytical approaches to promise the traceability, safety, and quality of foods in the acquiescence with the consumers and legislation demands. The traditional methods have been used at the starting of the 20th century based on wet chemical methods. Now it existing the powerful analytical techniques used in food analysis and safety. This development has led to substantial enhancements in the analytical accuracy, precision, sensitivity, selectivity, thereby mounting the applied range of food applications. In the present decade, microextraction (micro-scale extraction) pays more attention due to its futures such as low consumption of solvent and sample, throughput analysis easy to operate, greener, robotics, and miniaturization, different adsorbents have been used in the microextraction process with unique nature recognized with wide range applications.

Sheathed in situ heteroepitaxial growth metal-organic framework probe for detection of polycyclic aromatic hydrocarbons in river water and living fish

Exploring the presence of polycyclic aromatic hydrocarbons (PAHs) in aquatic environment is an important task. Metal-organic frameworks (MOF) are commonly used as sorbents for enriching PAHs but their crystal synthesis, sorbent preparation and robustness remain challenging. In the present study, under mild conditions, a novel sheathed MOF fiber coating was fabricated via in situ heteroepitaxial growth of copper-2,5-diaminoterephthalate (Cu-DAT) crystals and subsequent polyimide (PI) sheath. The copper hydroxide nanotubes were first synthesized on the copper wire to provide a substrate for further in situ heteroepitaxial Cu-DAT growth, and the coating was then sheathed with PI via a simple dip-coating procedure. The well-ranged copper hydroxide nanotubes, the unique adsorption property of Cu-DAT, and the PI sheath, the prepared fiber all contributed to a successful solid-phase microextraction (SPME) device for detecting PAHs. Results demonstrated that the SPME methods using the novel fiber possessed great sensitivity, wide linear range, good reproducibility, and the robustness was significantly improved with PI sheath. The novel SPME material was successfully applied for detection of PAHs in river water samples and in vivo detection of PAHs in fish dorsal muscle. In general, this study explored an effective and convenient method to prepare high-efficient MOF-based SPME fiber for PAHs analysis in complex environmental water samples and living organisms via in situ growth and polymer sheath.

Sample treatment based on molecularly imprinted polymers for the analysis of veterinary drugs in food samples: a review

The use of veterinary drugs in medical treatments and in the livestock industry is a recurrent practice. When applied in subtherapeutic doses over prolonged times, they can also act as growth promoters. However, residues of these substances in foods present a risk to human health. Their analysis is thus important and can help guarantee consumer safety. The critical point in each analytical technique is the sample treatment and the analytical matrix complexity. The present manuscript summarizes the development, type of synthesis, characterization, and application of molecularly imprinted polymers in the separation, identification, and quantification techniques for the determination of veterinary drug residues in food samples in extraction, clean-up, isolation, and pre-concentration systems. Synthesized sorbents with specific recognition properties improve the interactions between the analytes and the polymeric sorbents, providing better analysis conditions and advantages in comparison with commercial sorbents in terms of high selectivity, analytical sensitivity, easy performance, and low cost analysis.

Bioanalytical HPLC Applications of In-Tube Solid Phase Microextraction: A Two-Decade Overview

In-tube solid phase microextraction is a cutting-edge sample treatment technique offering significant advantages in terms of miniaturization, green character, automation, and preconcentration prior to analysis. During the past years, there has been a considerable increase in the reported publications, as well as in the research groups focusing their activities on this technique. In the present review article, HPLC bioanalytical applications of in-tube SPME are discussed, covering a wide time frame of twenty years of research reports. Instrumental aspects towards the coupling of in-tube SPME and HPLC are also discussed, and detailed information on materials/coatings and applications in biological samples are provided.

Developing a novel packed in-tube solid-phase extraction method for determination ∆ 9-tetrahydrocannabinol in biological samples and cannabis leaves

A novel plate-like nano-sorbent based on copper/cobalt/chromium layered double hydroxide was synthesized by a simple coprecipitation method. The synthesized nanoparticels were introduced into a stainless steel cartridge using a dry packing method. Then, the packed cartridge was introduced as a novel on-line "packed in-tube" configuration and followed by high performance liquid chromatography for the determination of trace amounts of ^∆ 9-tetrahydrocannabinol from biological samples and cannabis leaves. The as-prepared sorbent exhibited long lifetime, good chemical stability, and high anion-exchange capacity. Several important factors affecting the extraction efficiency, such as extraction and desorption times, pH of the sample solution and flow rates of the sample and eluent solutions, were investigated and optimized. Under optimized conditions, this method showed good linearity for ^∆ 9-tetrahydrocannabinol in the ranges of 0.09-500, 0.3-500, and 0.4-500 µg/L with coefficients of determination of 0.9999, 0.9991, and 0.9994 in water, serum and plasma samples, respectively. The inter- and intra-assay precisions (n = 3) were respectively in the ranges of 1.8-4.6% and 1.9-4.0% at three concentration levels of 10, 50, and 100 µg/L. The limits of detection were also in the range of 0.02-0.1 µg/L.

Combining microextraction methods with surface-enhanced Raman spectroscopy towards more selective and sensitive analyte detection by plasmonic metal nanoparticles

Raman signals of analytes can be enhanced on the surface of noble nanoparticles by generating SERS signals, which can be further enhanced using microextraction (ME) techniques.

Simultaneous HPLC-MS determination of 8-hydroxy-2'-deoxyguanosine, 3-hydroxyphenanthrene and 1-hydroxypyrene after online in-tube solid phase microextraction using a graphene oxide/poly(3,4-ethylenedioxythiophene)/polypyrrole composite

The exploration of monohydroxy polycyclic aromatic hydrocarbons and 8-hydroxy-2'-deoxyguanosine (8-OHdG) produced by oxidative stress and DNA damage is a powerful and non-invasive tool to study the health risk of exposure to polycyclic aromatic hydrocarbons (PAHs). A nanocomposite prepared from graphene oxide, poly(3,4-ethylenedioxythiophene) and polypyrrole was electrodeposited on the internal surface of a stainless-steel tube for online in-tube solid phase microextraction (IT-SPME) of 8-OHdG, 3-hydroxyphenanthrene and 1-hydroxypyrene from urine. The coating possesses excellent chemical and mechanical stability, high extraction efficiency, good resistance to matrix interference, and a long lifespan. An online IT-SPME-high performance liquid chromatography-mass spectrometry method was developed for the determination of these three metabolite biomarkers in human urine. Figures of merit include (a) enrichment factors of 30-48; (b) low limits of detection (4-41 pg·mL^-1 at S/N = 3); (c) wide linear ranges (0.05-50 ng·mL^-1); (d) good recoveries from spiked samples (71.6-109.5%); and (e) acceptable repeatability (2.3-14.6%). The method offers the advantages of low cost, simplicity, sensitivity, rapidity and automation. Graphical abstract Schematic illustration of online in-tube solid phase microextraction using graphene oxide/poly(3,4-ethylenedioxythiophene)/polypyrrole composites as adsorbent in a stainless-steel (SS) tube for the enrichment and simultaneous determination of 8-hydroxy-2'-deoxyguanosine, 3-hydroxyphenanthrene and 1-hydroxypyrene prior to HPLC-MS analysis.

Preparation and application of chlorpyrifos molecularly imprinted solid-phase microextraction probes for the residual determination of organophosphorous pesticides in fresh and dry foods

A solid-phase microextraction probe was prepared on the surface of a stainless-steel wire through molecular sol-gel imprinting technology using chlorpyrifos as a template molecule, tetraethoxysilane as a sol-gel precursor, and acrylamide and β-cyclodextrin as functional monomers. The polymer was characterized by infrared spectrometry and scanning electron microscopy. Moreover, the selectivity and the parameters including the type and volume of the extraction solvents, ionic strength, pH, temperature, extraction time, stirring speed, and desorption time affecting extraction performance were evaluated. Under the optimum solid-phase microextraction and gas chromatography conditions, the linear ranges were 0.25-25.0 μg/L for chlorpyrifos, quinalphos, triazophos, pirimiphos-methyl, and chlorpyrifos-methyl with the correlation coefficient above 0.99. The detection limits (S/N = 3) were in the range of 0.02-0.07 μg/L and the RSDs were <7.3%. The developed method was successfully used to determine the multi-residues of chlorpyrifos, quinalphos, triazophos, pirimiphos-methyl, and chlorpyrifos-methyl in green peppers and cinnamon with satisfactory recoveries.

Clinical application of microsampling versus conventional sampling techniques in the quantitative bioanalysis of antibiotics: a systematic review

Conventional sampling techniques for clinical pharmacokinetic studies often require the removal of large blood volumes from patients. This can result in a physiological or emotional burden, particularly for neonates or pediatric patients. Antibiotic pharmacokinetic studies are typically performed on healthy adults or general ward patients. These may not account for alterations to a patient’s pathophysiology and can lead to suboptimal treatment. Microsampling offers an important opportunity for clinical pharmacokinetic studies in vulnerable patient populations, where smaller sample volumes can be collected. This systematic review provides a description of currently available microsampling techniques and an overview of studies reporting the quantitation and validation of antibiotics using microsampling. A comparison of microsampling to conventional sampling in clinical studies is included.

Using cobalt/chromium layered double hydroxide nano-sheets as a novel packed in-tube solid phase microextraction sorbent for facile extraction of acidic pesticides from water samples

Cobalt/chromium-layered double hydroxide (Co/Cr (NO₃⁻)-LDH) nano-sheets were employed as a packed in-tube solid phase microextraction sorbent for efficient extraction of acidic pesticides from water samples.

Preparation of novel magnetic molecular imprinted polymers nanospheres via reversible addition - fragmentation chain transfer polymerization for selective and efficient determination of tetrabromobisphenol A

A well-defined molecularly imprinted polymer nanospheres with excellent specific recognition ability was prepared on Fe₃O₄ nanoparticles via the combination of click chemistry and surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization and using Tetrabromobisphenol A as template. Concretely, Fe₃O₄ nanoparticles were prepared by solvothermal method and then modified by 4-vinylbenylchloride through distillation-precipitation, which makes azide groups easily introduced on the surface of magnetic nanoparticles to form the relatively large amount of benzyl chloride groups. With high efficiency, alkyne terminated RAFT chain transfer agent were then immobilized onto the surface of Fe₃O₄ by means of click chemistry, which is Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). The highly uniform imprinted thin film was finally fabricated on the surface of RAFT agent modified Fe₃O₄ nanoparticles. The binding results demonstrated that as-prepared imprinted beads exhibited remarkable molecular imprinting effects to the template molecule, fast rebinding kinetics and an excellent selectivity to compounds with similar configuration.

An overview of multidimensional liquid phase separations in food analysis

Food safety is a priority public health concern that demands analytical methods capable to detect low concentration level of contaminants (e.g. pesticides and antibiotics) in different food matrices. Due to the high complexity of these matrices, a sample preparation step is in most cases mandatory to achieve satisfactory results being usually tedious, lengthy, and prone to the introduction of errors. For this reason, many research groups have focused efforts on the development of online systems capable to do the cleanup, concentration, and separation steps at once through multidimensional separation techniques (MDS). Among several possible setups, the most popular are the multidimensional chromatographic techniques (MDC) that consist in combining more than one mobile and/or stationary phase to provide a satisfactory separation. In the present review, we selected a variety of multidimensional separation systems used for food contaminant analysis in order to discuss the instrumentation aspects, the concept of orthogonality, column approaches used in these systems, and new materials that can be used in these columns. Selected classes of contaminants present in food matrices are introduced and discussed as example of the potential applications of multidimensional liquid phase separation techniques in food safety.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Molecularly imprinted polymers for on-line extraction techniques

Recent years have seen an increasing interest in the use of molecularly imprinted polymers (MIPs) as a sorbent for different extraction methods and this is due to its high selectivity. The MIP is designed to show specificity for the analyte of interest. Moreover, MIPs show physical robustness, resistance to high temperatures and pressures, and stability in the presence of acids, bases and a wide range of organic solvents. In the present article, various novel sample preparation techniques which MIPs applied as sorbent and on-line connected with analytical instruments were highlighted and discussed. The future aspects of MIPs as well were described.