Recent developments on polysaccharide-based chiral stationary phases for liquid-phase separation of enantiomers

Cross-linked polysiloxane-coated stable bond O-9-(2,6-diisopropylphenylcarbamoyl)quinine and quinidine chiral stationary phases as well as application in enantioselective cryo-HPLC

In this work, brush-type chiral stationary phases (CSPs) with O-9-(2,6-diisopropylphenylcarbamoyl)-modified quinidine (DIPPCQD-brush/-SH) and O-9-(2,6-diisopropylphenylcarbamoyl)-modified quinine (DIPPCQN-brush/-SH) were prepared as benchmarks for comparison with new corresponding polymeric CSPs with more stable bonding chemistry. These polymeric CSPs were prepared by coating a thin poly(3-mercaptopropyl)-methylsiloxane film together with the chiral selector onto vinyl-modified silica. In a second step, immobilization of the quinine/quinidine derivatives as well as cross-linking of the polysiloxane film to the vinyl-silica is achieved by a double thiol-ene click reaction. The polymeric CSPs exhibited similar enantioselectivity as the corresponding brush phases, but showed lower chromatographic efficiencies. Chiral acidic substances were separated into enantiomers (e.g., N-protected amino acids, herbicides like dichlorprop) in accordance with an enantioselective anion-exchange process. Oxidation of residual thiol groups of the polymer DIPPCQN-CSP introduced sulfonic acid co-ligands on the silica surface, which resulted in greatly reduced retention times. Acting as immobilized counterions, they allowed to reduce the concentration of counterions in the mobile phase, which is favorable for liquid chromatography (LC)-electrospray ionization-mass spectrometry application. Ibuprofen showed a single peak under ambient column temperature. However, application of cryogenic cooling of the column enabled to achieve baseline separation at -20°C column temperature. It can be explained by an enthalpically dominated separation, which leads to an increase in separation factors when the temperature is reduced. While it is quite uncommon to work at subzero degree column temperature, this work illustrates the potential to exploit such temperature regime for optimization of LC enantiomer separations.

New Levan-Based Chiral Stationary Phases: Synthesis and Comparative HPLC Enantioseparation of (±)-trans-β-Lactam Ureas in the Polar Organic Mode

In this paper, the preparation of three new polysaccharide-type chiral stationary phases (CSPs) based on levan carbamates (3,5-dimethylphenyl, 4-methylphenyl, and 1-naphthyl) is described. The enantioseparation of (±)-trans-β-lactam ureas 1a-h was investigated by high-performance liquid chromatography (HPLC) on six different chiral columns (Chiralpak AD-3, Chiralcel OD-3, Chirallica PST-7, Chirallica PST-8, Chirallica PST-9, and Chirallica PST-10) in the polar organic mode, using pure methanol (MeOH), ethanol (EtOH), and acetonitrile (ACN). Apart from the Chirallica PST-9 column (based on levan tris(1-naphthylcarbamate), the columns exhibited a satisfactory chiral recognition ability for the tested trans-β-lactam ureas 1a-h.

Potential Application Prospects of Biomolecule-Modified Two-Dimensional Chiral Nanomaterials in Biomedicine

Chirality, one of the most fundamental properties of natural molecules, plays a significant role in biochemical reactions. Nanomaterials with chiral characteristics have superior properties, such as catalytic properties, optoelectronic properties, and photothermal properties, which have significant potential for specific applications in nanomedicine. Biomolecular modifications such as nucleic acids, peptides, proteins, and polysaccharides are sources of chirality for nanomaterials with great potential for application in addition to intrinsic chirality, artificial macromolecules, and metals. Two-dimensional (2D) nanomaterials, as opposed to other dimensions, due to proper surface area, extensive modification sites, drug loading potential, and simplicity of preparation, are prepared and utilized in diagnostic applications, drug delivery research, and tumor therapy. Current advanced studies on 2D chiral nanomaterials for biomedicine are focused on novel chiral development, structural control, and materials sustainability applications. However, despite the advances in biomedical research, chiral 2D nanomaterials still confront challenges such as the difficulty of synthesis, quality control, batch preparation, chiral stability, and chiral recognition and selectivity. This review aims to provide a comprehensive overview of the origins, synthesis, applications, and challenges of 2D chiral nanomaterials with biomolecules as cargo and chiral modifications and highlight their potential roles in biomedicine.

High-performance liquid chromatographic enantioseparation of azole analogs of monoterpene lactones and amides focusing on the separation characteristics of polysaccharide-based chiral stationary phases

High-performance liquid chromatography-based enantioseparation of newly prepared azole analogs of monoterpene lactones and amides was studied. Effects of additives and mobile phase composition were evaluated both in normal and polar organic modes. Applying amylose tris-(3,5-dimethylphenylcarbamate) selector in normal and polar organic modes acid and base additives were found to affect the peak profiles, without significantly influencing the enantiorecognition ability of the studied selector. In most cases, differences observed in retention times and enantioselectivities were lower than 10 and 20 % under normal phase and polar organic conditions, respectively. Under normal phase conditions decreased retention was observed for all the studied analytes with increased eluent polarity. Interestingly, enantioselectivity was only slightly (<10 %) influenced by the variation in the n-hexane/2-propanol ratio between 80/20 and 20/80 v/v. In polar organic mode, five different neat solvents (acetonitrile, methanol, ethanol, 1-propanol, and 2-propanol) were tested, and the best results were obtained with acetonitrile and ethanol in the case of Lux Amylose-1 column with enantioresolutions most often above 2. Based on results obtained with amylose and cellulose-based columns the amylose tris-(3,5-dimethylphenylcarbamate) selector is found to offer a superior performance both in normal and polar organic modes. When evaluating the possible effects of the selector immobilization, no striking differences were found in the normal phase. Usually, enantioselectivities and resolutions were higher (10-20 %), while retention factors of the first peaks were lower (20-30 %), on the coated-type column. In contrast, in polar organic mode, the retention characteristics and enantiorecognition ability of the coated and immobilized selectors were heavily affected by the nature of the polar solvent. Special attention has been paid to the history-dependent behavior of polysaccharide-based selectors. A confidence interval-based evaluation is suggested to help comparison of the histereticity observed in different systems. Several examples are shown to confirm that the recently discovered hysteresis is a common characteristic of polysaccharide-based selectors.

Positive Synergy between the Helical Poly(phenylacetylene) Backbones and the Helical L-Proline Oligopeptide Pendants for Enhanced Enantioseparation Properties

A series of optically active helical poly(phenylacetylene)s (PPA-Pro1, PPA-Pro3, PPA-Pro6, PPA-Pro9, and PPA-Pro12) bearing different chain lengths of L-proline oligopeptide in the side chains were obtained by polymerizing the corresponding novel phenylacetylene monomers. The monomer adopted a trans-rich helix structure when the L-proline oligopeptide chain length was longer, according to the optical activities and 2D-NMR analysis. The helical structure could be maintained and significantly influenced the polymers' helical conformation by introducing the L-proline oligopeptide to the pendants. By the way, the morphology of PPA-Pro3 was observed by atomic force microscope (AFM) on highly oriented pyrolytic graphite (HOPG), and the information on the helix direction, pitch, and chain arrangement was obtained. Also, the chiral separation properties of these polymer-based chiral stationary phases (CSPs) were investigated using high-performance liquid chromatography (HPLC). The poly(phenylacetylene)s showed enhanced enantioseparation properties toward various racemates depending on the longer chain length of the L-proline oligopeptide in the pendants and the positive synergy between the helical backbone and helical side chains. Particularly, PPA-Pro9 showed comparable or even superior enantioseparation properties for racemates 2 and 9 to four commercial columns (Daicel Chiralpak or Chiralcel AD, AS, OD, and OT), indicating that these poly(phenylacetylene)-based CSPs have potential practical values. This work presented here provides inspiration for the further development of CSPs based on a new paradigm.

Evaluation of greenness and analytical performances of separative methods for chiral separation of novel lactam-based P2RX7-antagonists

In this work, a preparative supercritical fluid chromatography (SFC) method was first developed to separate a series of chiral compounds evaluated as lactam-based P2RX7 antagonists. Subsequently, high-performance liquid chromatography, SFC, and capillary electrophoresis (CE) were comparatively investigated as QC tools to determine the enantiomeric purity of the separated isomers, including analytical performance and greenness. The screening of the best conditions was carried out in liquid and SFC on the nine derivatives and the amylose tris(3,5-dimethylphenylcarbamate)-based chiral stationary phase was found to be highly efficient. The same screening was carried out in CE and very different conditions, either in acidic or basic background electrolyte and different cyclodextrins used as chiral selectors, allowed the separation of six of the nine derivatives. 1-((3,4-Dichlorophenyl)carbamoyl)-5-oxopyrrolidine-2-carboxylic acid (compound 1) was chosen as a probe, and its semi-preparative separation by SFC and enantiomeric verification using the three techniques are presented. Its limit of detection and limit of quantification are calculated for each method. Finally, the greenness of each quality control method was evaluated.

A liquid chromatography-mass spectrometry method for the enantioselective multiresidue determination of nine chiral agrochemicals in urine using an enrichment procedure based on graphitized carbon black

Many agrochemicals are chiral molecules, and most of them are marketed as racemates or diastereomeric mixtures. Stereoisomers that are not the active enantiomer have little or no pesticidal activity and can exert serious toxic effects towards non-target organisms. Thus, investigating the possible exposure to different isomers of chiral pesticides is an urgent need. The present work was aimed at developing a new enantioselective high-performance liquid chromatography-mass spectrometry method for the simultaneous determination of nine chiral pesticides in urine. Two solid-phase extraction (SPE) procedures, based on different carbon-based sorbents (graphitized carbon black (GCB) and buckypaper (BP)), were developed and compared. By using GCB, all analytes were recovered with yields ranging from 60 to 97%, while BP allowed recoveries greater than 54% for all pesticides except those with acid characteristics. Baseline separation was achieved for the enantiomers of all target agrochemicals on a Lux Cellulose-2 column within 24 min under reversed-phase mode. The developed method was then validated according to the FDA guidelines for bioanalytical methods. Besides recovery, the other evaluated parameters were precision (7-15%), limits of detection (0.26-2.21 µg/L), lower limits of quantitation (0.43-3.68 µg/L), linear dynamic range, and sensitivity. Finally, the validated method was applied to verify the occurrence of the pesticide enantiomers in urine samples from occupationally exposed workers.

Recent developments in molecular modeling tools and applications related to pharmaceutical and biomedical research

In modern pharmaceutical and biomedical research, molecular modeling represents a useful tool to explore processes and their mechanistic bases at the molecular level. Integrating experimental and virtual analysis is a fruitful approach to study ligand-receptor interaction in chemical, biochemical and biological environments. In these fields, molecular docking and molecular dynamics are considered privileged techniques for modeling (bio)macromolecules and related complexes. This review aims to present the current landscape of molecular modeling in pharmaceutical and biomedical research by examining selected representative applications published in the last years and highlighting current topics and trends of this field. Thus, a systematic compilation of all published literature has not been attempted herein. After a brief overview of the main theoretical and computational tools used to investigate mechanisms at molecular level, recent applications of molecular modeling in drug discovery, ligand binding and for studying protein conformation and function will be discussed. Furthermore, specific sections will be devoted to the application of molecular modeling for unravelling enantioselective mechanisms underlying the enantioseparation of chiral compounds of pharmaceutical and biomedical interest as well as for studying new forms of noncovalent interactivity identified in biochemical and biological environments. The general aim of this review is to provide the reader with a modern overview of the topic, highlighting advancements and outlooks as well as drawbacks and pitfalls still affecting the applicability of theoretical and computational methods in the field of pharmaceutical and biomedical research.

High-Enantioselectivity Adsorption Separation of Racemic Mandelic Acid and Methyl Mandelate by Robust Chiral UiO-68-Type Zr-MOFs

Mandelic acid and its analogues are highly valuable medical intermediates and play an important role in the pharmaceutical industry, biochemistry, and life sciences. Therefore, effective enantioselective recognition and separation of mandelic acid are of great significance. In this study, two of our recently reported chiral amine-alcohol-functionalized UiO-68-type Zr-HMOFs 1 and 3 with high chemical stability, abundant binding sites, and large chiral pores were selected as chiral selectors for the enantioselective separation of mandelic acid (MA), methyl mandelate (MM), and other chiral molecules containing only one phenyl. Materials 1 and 3 exhibited excellent enantioselective separation performance for MA and MM. Especially for the separation of racemate MA, the enantiomeric excess values reached 97.3 and 98.9%, which are the highest reported values so far. Experimental and density functional theory (DFT) computational results demonstrated that the introduction of additional phenyls on the chiral amine alcohol pendants in 3 had somewhat impact on the enantioselective adsorption and separation of MA or MM compared with 1, but it was not significant. Further research on the enantioselective separation of those chiral adsorbates containing only one phenyl by material 1 indicated the crucial role of the groups directly bonded to the chiral carbons of the adsorbates in the selective separation of enantiomers, especially showing higher enantioselectivity for the adsorbates with two hydrogen-bonding groups directly bonded to its chiral carbon.

Chiral high-performance liquid chromatography analysis of mono-, di-, and triacylglycerols with amylose- and cellulose-phenylcarbamate-based stationary phases

The ever-increasing technological advancement in the (ultra)high-performance liquid chromatography tandem (high-resolution) mass spectrometry platforms have largely contributed to steeply intensify the interest towards lipidomics research. However, mass spectrometers alone are unable to distinguish between enantiomers. This obstacle is especially evident in the case of glycerolipids analysis due the prochiral nature of glycerol. Until a couple of decades ago, the stereoselective analysis of triacylglycerols (TAGs) was performed on the end products generated either from their enzymatic or chemical hydrolysis, namely on mono- or diacyl-sn-glycerols (MAGs and DAGs, respectively). These were then mostly analyzed with Pirkle-type chiral stationary phases (CSPs) after dedicated multi-step derivatization procedures. One of the most significant drawbacks of these traditional methods for enantioselective TAGs analysis (actually of the produced MAGs and DAGs, often investigated as target species per se) was the difficulty to totally abolish the migration of fatty acyls between glycerol positions. This made difficult to control and keep unaltered the stereochemistry of the original molecules. Over the last two decades, it has been widely demonstrated that the enantioselective analysis of intact TAGs as well as of non-derivatized MAGs and DAGs can be efficiently obtained using polysaccharide-based CSPs incorporating either amylose- or cellulose-phenylcarbamate derivatives chiral selectors. In this paper, the enantioselective methods developed with these CSPs for the enantioselective direct LC analysis of MAGs, DAGs and TAGs embedding different types of fatty acid residues are comprehensively reviewed.

Chromatographic Enantioseparation of Chiral Sulfoximines on Polysaccharide-Based Chiral Stationary Phases

Chiral sulfoximines have significant roles in pharmaceutical industry and agricultural chemicals. Furthermore, chiral structurally related sulfoximines are used for their wide potential applications in some uncharted territory. However, chromatographic study on these compounds has not been systematically performed. Herein, this paper describes the enantioseparation of 12 chiral sulfoximines on polysaccharide-based chiral stationary phases (CSPs). Separation factors of chiral column, high-performance liquid chromatography parameters such as mobile phase composition and column temperature were carefully investigated. Chiralcel OJ-H column can resolve all of the 12 compounds, while Chiralpak AD-H column and Chiralpak AS-H column can separate eight and nine molecules, respectively. The sulfoximines are effectively resolved with Chiralcel OJ-H column with a mixture of n-hexane/2-propanol (80:20) as the mobile phase.

Molecular Dynamics Simulations of Amylose- and Cellulose-Based Selectors and Related Enantioseparations in Liquid Phase Chromatography

In the last few decades, theoretical and technical advancements in computer facilities and computational techniques have made molecular modeling a useful tool in liquid-phase enantioseparation science for exploring enantioselective recognition mechanisms underlying enantioseparations and for identifying selector-analyte noncovalent interactions that contribute to binding and recognition. Because of the dynamic nature of the chromatographic process, molecular dynamics (MD) simulations are particularly versatile in the visualization of the three-dimensional structure of analytes and selectors and in the unravelling of mechanisms at molecular levels. In this context, MD was also used to explore enantioseparation processes promoted by amylose and cellulose-based selectors, the most popular chiral selectors for liquid-phase enantioselective chromatography. This review presents a systematic analysis of the literature published in this field, with the aim of providing the reader with a comprehensive picture about the state of the art and what is still missing for modeling cellulose benzoates and the phenylcarbamates of amylose and cellulose and related enantioseparations with MD. Furthermore, advancements and outlooks, as well as drawbacks and pitfalls still affecting the applicability of MD in this field, are also discussed. The importance of integrating theoretical and experimental approaches is highlighted as an essential strategy for profiling mechanisms and noncovalent interaction patterns.

Unravelling dispersion forces in liquid-phase enantioseparation. Part I: Impact of ferrocenyl versus phenyl groups

BACKGROUND

Highly ordered chiral secondary structures as well as multiple (tunable) recognition sites are the keys to success of polysaccharide carbamate-based chiral selectors in enantioseparation science. Hydrogen bonds (HBs), dipole-dipole, and π-π interactions are classically considered the most frequent noncovalent interactions underlying enantioselective recognition with these chiral selectors. Very recently, halogen, chalcogen and π-hole bonds were also identified as interactions working in polysaccharide carbamate-based selectors to promote enantiomer distinction. On the contrary, the function of dispersion interactions in this field was not explored so far.

RESULTS

The enantioseparation of chiral ferrocenes featuring chiral axis or chiral plane as stereogenic elements was performed by comparing five polysaccharide carbamate-based chiral columns, with the aim to identify enantioseparation outcomes that could be reasonably determined by dispersion forces, making available a reliable experimental data set for future theoretical studies to confirm the heuristic hypothesis. The effects of mobile phase polarity and temperature on the enantioseparation were considered, and potential recognition sites on analytes and selectors were evaluated by electrostatic potential (V) analysis and molecular dynamics (MD). In this first part, the enantioseparation of 3,3'-dibromo-5,5'-bis-ferrocenylethynyl-4,4'-bipyridine bearing two ferrocenylethynyl units linked to an axially chiral core was performed and compared to that of the analyte featuring the same structural motif with two phenyl groups in place of the ferrocenyl moieties. The results of this study showed the superiority of the ferrocenyl compared to the phenyl group, as a structural element favouring enantiodifferentiation.

SIGNIFICANCE AND NOVELTY

Even if dispersion (London) forces have been envisaged acting in liquid-phase enantioseparations, focused studies to explore possible contributions of dispersion forces with polysaccharide carbamate-based selectors are practically missing. This study allowed us to collect experimental information that support the involvement of dispersion forces as contributors to liquid-phase enantioseparation, paving the way to a new picture in this field.

Polymeric Carbon Nitride with Chirality Inherited from Supramolecular Assemblies

The facile synthesis of chiral materials is of paramount importance for various applications. Supramolecular preorganization of monomers for thermal polymerization has been proven as an effective tool to synthesize carbon and carbon nitride-based (CN) materials with ordered morphology and controlled properties. However, the transfer of an intrinsic chemical property, such as chirality from supramolecular assemblies to the final material after thermal condensation, was not shown. Here, we report the large-scale synthesis of chiral CN materials capable of enantioselective recognition. To achieve this, we designed supramolecular assemblies with a chiral center that remains intact at elevated temperatures. The optimized chiral CN demonstrates an enantiomeric preference of ca. 14 %; CN electrodes were also prepared and show stereoselective interactions with enantiomeric probes in electrochemical measurements. By adding chirality to the properties transferrable from monomers to the final product of a thermal polymerization, this study confirms the potential of using supramolecular precursors to produce carbon and CN materials and electrodes with designed chemical properties.

Chiral Materials: Progress, Applications, and Prospects

Chirality is a universal phenomenon in molecular and biological systems, denoting an asymmetric configurational property where an object cannot be superimposed onto its mirror image by any kind of translation or rotation, which is ubiquitous on the scale from neutrinos to spiral galaxies. Chirality plays a very important role in the life system. Many biological molecules in the life body show chirality, such as the "codebook" of the earth's biological diversity-DNA, nucleic acid, etc. Intriguingly, living organisms hierarchically consist of homochiral building blocks, for example, l-amino acids and d-sugars with unknown reason. When molecules with chirality interact with these chiral factors, only one conformation favors the positive development of life, that is, the chiral host environment can only selectively interact with chiral molecules of one of the conformations. The differences in chiral interactions are often manifested by chiral recognition, mutual matching, and interactions with chiral molecules, which means that the stereoselectivity of chiral molecules can produce changes in pharmacodynamics and pathology. Here, the latest investigations are summarized including the construction and applications of chiral materials based on natural small molecules as chiral source, natural biomacromolecules as chiral sources, and the material synthesized by design as a chiral source.

Chiral separation and molecular modeling study of decursinol and its derivatives using polysaccharide-based chiral stationary phases

Plant-based bioactive substances have long been used to treat inflammatory ailments, owing to their low toxicity and cost-effectiveness. To enhance plant treatment by eliminating undesirable isomers, optimizing the chiral separation techniques in pharmaceutical and clinical studies is important. This study reported a simple and effective method for chiral separation of decursinol and its derivatives, which are pyranocoumarin compounds with anti-cancer and anti-inflammatory properties. Baseline separation (Rs >1.5) was achieved using five different polysaccharide-based chiral stationary phases (CSPs) that differed in chiral origin, chiral selector chemistry, and preparation technique. To separate all six enantiomers simultaneously, n-hexane and three alcohol modifiers (ethanol, isopropanol, and n-butanol) were used as mobile phases in the normal-phase mode. The chiral separation ability of each column with various mobile phase compositions was compared and discussed. As a result, amylose-based CSPs with linear alcohol modifiers demonstrated superior resolution. Three cases of elution order reversal caused by modifications of CSPs and alcohol modifiers were observed and thoroughly analyzed. To elucidate the chiral recognition mechanism and enantiomeric elution order (EEO) reversal phenomenon, detailed molecular docking simulations were conducted. The R- and S-enantiomers of decursinol, epoxide, and CGK012 exhibited binding energies of -6.6, -6.3, -6.2, -6.3, -7.3, and -7.5 kcal/mol, respectively. The magnitude of the difference in binding energies was consistent with the elution order and enantioselectivity (α) of the analytes. The molecular simulation results demonstrated that hydrogen bonds, π-π interactions, and hydrophobic interactions have a significant impact on chiral recognition mechanisms. Overall, this study presented a novel and logical approach of optimizing chiral separation techniques in the pharmaceutical and clinical industries. Our findings could be further applied for screening and optimizing enantiomeric separation.

Exploitation of the enantioselectivity space of coated amylose tris(3,5-dimethylphenylcarbamate) in mixtures of 2-propanol and acetonitrile

Chiral stationary phases (CSPs) with coated amylose tris(3,5-dimethylphenylcarbamate) (ADMPC) selector have long been recognized for their excellent chiral recognition ability in liquid chromatography. The conformational versatility behind this feature is the source of their known hysteretic behavior, which has been previously observed in polar organic (PO) mode eluents containing 2-propanol (IPA). Mixtures of IPA and acetonitrile (MeCN), a typical PO mode eluent system, have not been examined in this aspect yet, even though hysteresis is promising for finding unique unexplored enantioselectivities. Not only was the hysteresis detectable on ADMPC using mixtures of IPA and MeCN, but it was the typical behavior in a diverse set of test compounds. The difference in the retention time of the same analyte under conditions which only differed in the eluent history on the column can go up to 20-fold. The assumed hindered conformational changes of the selector were reflected in retention drift at certain eluent compositions. On the two sides of the transitions, distinct, useful states of the selector were detected. A series of IPA - MeCN compositions with defined pretreatment was selected and recommended as an extension of the preliminary, first choice method screening set that used only alcohols. The incorporation of a solvent possessing substantially different characteristics enhances the potential in practical applications, while keeping the technical simplicity. Stability and robustness of the additional states of the CSP were characterized. The examined columns of different brands shared the observed behavior. Kinetic stability of a column state is adequate for successful application. The evaluated states of ADMPC provide multiple enantiorecognition potential by using mixtures of IPA and MeCN also considering the pretreatment of the column. Unprecedented double and triple elution order reversals along the composition range supported the versatility of the available states. Our findings further enhance the usefulness of ADMPC-containing CSPs. We provide instructions for the application of the widespread chiral selector in common eluent mixtures to avoid pitfalls regarding reproducibility and robustness.

Enantiomeric analysis of drugs in water samples by using liquid-liquid microextraction and nano-liquid chromatography

The nano-LC technique is increasingly used for both fast studies on enantiomeric analysis and test beds of novel stationary phases due to the small volumes involved and the short conditioning and analysis times. In this study, the enantioseparation of 10 drugs from different families was carried out by nano-LC, utilizing silica with immobilized amylose tris(3-chloro-5-methylphenylcarbamate) column. The effect on chiral separation caused by the addition of different salts to the mobile phase was evaluated. To simultaneously separate as many enantiomers as possible, the effect of buffer concentration in the mobile phase was studied, and, to increase the sensitivity, a liquid-liquid microextraction based on the use of isoamyl acetate as sustainable extraction solvent was applied to pre-concentrate four chiral drugs from tap and environmental waters, achieving satisfactory recoveries (>70%).

Heterogenous adsorption mechanisms for describing enantioselective retention in normal-phase liquid chromatography

In this study, the enantioselective retention behaviors of methyl mandelate (MM) and benzoin (B) were investigated using Chiralpak IB as a sorbent and ethanol, 1-propanol, and 1-butanol as solvent modifiers in the normal-phase mode. For both MM and B, similar chiral recognition mechanisms were observed, potentially involving at least two types of chiral adsorption sites. With a retention model describing local retention behaviors, an enantioselectivity model based on a three-site model was proposed to describe the data. Fitted parameters were also used to analyze the contributions of each type of adsorption site to the apparent retention behavior. Combining the local retention model with the three-site model provided a qualitative and quantitative explanation for the correlation between modifier concentration and enantioselectivity. Overall, our results indicated that heterogeneous adsorption mechanisms are a key aspect in understanding enantioselective retention behaviors. Distinct local adsorption sites contribute differently to apparent retention behaviors, with these contributions being influenced by the mobile phase composition to varying degrees. Hence, enantioselectivity changes with variations in modifier concentration.

Profiling of branched chain and straight chain saturated fatty acids by ultra-high performance liquid chromatography-mass spectrometry

Branched chain fatty acids (BCFAs) are one of the important sub categories of fatty acids (FAs) which have unique functions in nature. They are commonly analyzed by GC-MS after derivatization to methyl esters (FAMEs). On the other hand, there is a lack of isomer-selective LC-MS methods which allow the distinction of different isomers with wide coverage of carbon chain length. In this work, a systematic retention and isomer selectivity study on seven commercially available UHPLC columns (six polysaccharide columns Chiralpak IA-U, IB-U, IC-U, ID-U, IG-U and IH-U; one Acquity UPLC CSH C18 column) was performed. Various experimental factors were evaluated including column temperatures, gradient profiles and flow rates to elucidate their effects on the separation ability of homologous series of BCFAs with distinct chain lengths, different branching types and branching positions. In general, IG-U outperformed the other columns in terms of isomer selectivity especially for the short and medium-chain BCFA isomers while RP C18 showed good potential in terms of selectivity for long-chain BCFA isomers. Furthermore, after the evaluation of the chromatographic retention pattern on the various columns and method optimization, we report a methodology for untargeted isomer-selective BCFA profiling without precolumn derivatization with UHPLC-ESI-MS/MS by quadrupole-time-of-flight instrument with SWATH acquisition. The best method provides selectivity for constitutional isomers of BCFAs covering distinct chain length (C5-C20) with different branching types (methyl or ethyl) and branching positions (2Me, 3Me, 4Me, 6Me, anteiso and iso-BCFAs) with an optimized LC condition on Acquity UPLC CSH C18 column. Finally, the optimized method was applied for the BCFAs profiling in lipid extracts of Staphylococcus aureus samples. Besides, pooled human platelets and pooled human plasma were evaluated as mammalian samples for presence of BCFAs as well. The new method showed strong potential for BCFA profiling in bacterial samples including different isomers anteiso and iso-BCFAs, which could be a useful tool for related subdisciplines in metabolomics and lipidomics in particular in combination with electron-activated dissociation MS. Compared to GC, the presented isomer selective LC methods can be also of great utility for preparative purposes. Equivalent (carbon) chain length numbers were calculated for RP18 and Chiralpak IG-U and compared to those of FAMEs obtained by GC.

Branched medium-chain fatty acid profiling and enantiomer separation of anteiso-forms of teicoplanin fatty acyl side chain RS3 using UHPLC-MS/MS with polysaccharide columns

This work reports on targeted UHPLC-tandem mass spectrometry methods for the chiral separation of anteiso-methyl branched fatty acids (aiFAs). The methods involve precolumn derivatization with 1-naphthylamine and chiral separation on Chiralpak IG-U. anteiso-Methyl branched fatty acids with up to eight carbons can be separated. A method was used for the assignment of the absolute configuration of an aiFA present as fatty acyl residue of the teicoplanin mixture, namely teicoplanin RS3. Furthermore, the excellent methylene selectivity and improved selectivity for constitutional isomers of the polysaccharide columns was exploited for the elucidation and structural confirmation of previously unknown fatty acyl residues in teicoplanin. This shows the versatility and practical applicability of polysaccharide columns as orthogonal stationary phases to reversed-phase for structural elucidation of natural compounds. The developed methods are useful tools for related subdisciplines such as targeted metabolomics and lipidomics.

Enantioseparation of planar chiral ferrocenes on cellulose-based chiral stationary phases: Benzoate versus carbamate pendant groups

In this study, the enantioseparation of 14 planar chiral ferrocenes containing halogen atoms, and methyl, iodoethynyl, phenyl, and 2-naphthyl groups, as substituents, was explored with a cellulose tris(4-methylbenzoate) (CMB)-based chiral column under multimodal elution conditions. n-Hexane/2-propanol (2-PrOH) 95:5 v/v, pure methanol (MeOH), and MeOH/water 90:10 v/v were used as mobile phases (MPs). With CMB, baseline enantioseparations were achieved for nine analytes with separation factors (α) ranging from 1.24 to 1.77, whereas only three analytes could be enantioseparated with 1.14 ≤ α ≤ 1.51 on a cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC)-based column, used as a reference for comparison, under the same elution conditions. Pendant group-dependent reversal of the enantiomer elution order was observed in several cases by changing CMB to CDMPC. The impact of analyte and chiral stationary phase (CSP) structure, and MP polarity on the enantioseparation, was evaluated. The two cellulose-based CSPs featured by different pendant groups were also compared in terms of thermodynamics. For this purpose, enthalpy (ΔΔH°), entropy (ΔΔS°) and free energy (ΔΔG°) differences, isoenantioselective temperatures (T_iso ), and enthalpy/entropy ratios (Q), associated with the enantioseparations, were derived from van 't Hoff plots by using n-hexane/2-PrOH 95:5 v/v and methanol/water 90:10 v/v as MPs. With the aim to disclose the functions of the different substituents in mechanisms and noncovalent interactions underlying analyte-selector complex formation at molecular level, electrostatic potential (V) analysis and molecular dynamics simulations were used as computational techniques. On this basis, enantioseparations and related mechanisms were investigated by integrating theoretical and experimental data.

Effect of mobile-phase modifiers on the enantioselective retention behavior of methyl mandelate with an amylose 3,5-dimethylphenylcarbamate chiral stationary phase under reversed-phase conditions

In this study, methanol, ethanol, n-propyl alcohol, isopropyl alcohol, acetone, and tert-butanol were used as organic modifiers in reversed-phase mode chiral liquid-chromatography to systematically investigate the effects of mobile phase components on the enantioselective retention behavior of methyl mandelate with immobilized amylose 3,5-dimethylphenylcarbamate-based sorbent called Chiralpak IA. A two-site enantioselective model was used to obtain information on the recognition mechanisms by observing the dependence of the enantioselectivity and retention factor difference on the modifier content. Similar enantioselective retention behaviors were observed for all modifiers, and characteristic modifier concentration points (P_L , P_M , and P_H ) were identified. At modifier concentrations up to P_M , the weakened hydrophobic environment resulted in polymer structural relaxation, which changed the recognition mechanisms. By contrast, at concentrations beyond P_H , considerably different enantioselectivity behaviors were observed, indicating that the existence of dipole-dipole interaction, which was stronger at higher modifier concentrations, contributed to the retention mechanisms. The concentrations at which these characteristic points occurred were dependent on the carbon number of the modifier molecule. Modifiers with more carbon numbers facilitated the transition in the enantioselective behaviors. These results demonstrated that the proposed method can provide a physically consistent quantitative description of enantioselective retention behavior in reversed-phase mode.

Enantioseparation and molecular modeling study of chiral amines as three naphthaldimine derivatives using amylose or cellulose trisphenylcarbamate chiral stationary phases

This study describes the enantioseparation of three chiral amines as naphthaldimine derivatives, using normal phase HPLC with amylose and cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phases (CSPs). Three chiral amines were derivatized using three structurally similar naphthaldehyde derivatizing agents, and the enantioselectivity of the CSPs toward the derivatives was examined. The degree of enantioseparation and resolution was affected by the amylose or cellulose-derived CSPs and aromatic moieties as well as a kind of chiral amine. Especially, efficient enantiomer separation was observed for 2-hydroxynapthaldimine derivatives on cellulose-derived CSPs. Molecular docking studies of three naphthaldimine derivatives of leucinol on cellulose tris(3,5-dimethylphenylcarbamate) were performed to estimate the binding energies and conformations of the CSP-analyte complexes. The obtained binding energies were in good agreement with the experimentally determined enantioseparation and elution order.

Silica Immobilised Chloro- and Amido-Derivatives of Eremomycine as Chiral Stationary Phases for the Enantioseparation of Amino Acids by Reversed-Phase Liquid Chromatography

Macrocyclic glycopeptide antibiotics immobilized on silica are one of the effective classes of stationary phases for chiral recognition and HPLC separation of a wide range of optically active compounds. Enantioselectivity primarily depends on the chemical structure of the chiral ligand, immobilization chemistry, and separation conditions. In the present work, three new chiral stationary phases (CSPs) based on macrocyclic antibiotic eremomycin were prepared and investigated for enantioseparation of amino acids. Two eremomycin derivatives, including simple non-substituted amide and bulky adamantyl amide, provided important information on the role of the carboxylic group in the eremomycin structure in the chiral recognition mechanism concerning amino acid optical isomers. One more CSP having a chlorine atom in the same position elucidates the role of the first aromatic ring in the eremomycin structure as a crucial point for chiral recognition. CSP with immobilized chloreremomycin was the most successful among the phases prepared in this work. It was additionally investigated under various separation conditions, including the type and content of the organic solvent in the eluent, the effects of different additives, and the concentration and pH of the buffer. Importantly, an efficient enantioselective separation of amino acids was achieved with pure water as the eluent.

Recognition in the Domain of Molecular Chirality: From Noncovalent Interactions to Separation of Enantiomers

It is not a coincidence that both chirality and noncovalent interactions are ubiquitous in nature and synthetic molecular systems. Noncovalent interactivity between chiral molecules underlies enantioselective recognition as a fundamental phenomenon regulating life and human activities. Thus, noncovalent interactions represent the narrative thread of a fascinating story which goes across several disciplines of medical, chemical, physical, biological, and other natural sciences. This review has been conceived with the awareness that a modern attitude toward molecular chirality and its consequences needs to be founded on multidisciplinary approaches to disclose the molecular basis of essential enantioselective phenomena in the domain of chemical, physical, and life sciences. With the primary aim of discussing this topic in an integrated way, a comprehensive pool of rational and systematic multidisciplinary information is provided, which concerns the fundamentals of chirality, a description of noncovalent interactions, and their implications in enantioselective processes occurring in different contexts. A specific focus is devoted to enantioselection in chromatography and electromigration techniques because of their unique feature as "multistep" processes. A second motivation for writing this review is to make a clear statement about the state of the art, the tools we have at our disposal, and what is still missing to fully understand the mechanisms underlying enantioselective recognition.

Development and evaluation of Pirkle-type chiral stationary phase for flash chromatography

Liquid chromatography is the most applied methodology for enantioseparation in preparative and semi-preparative scale; however, flash chromatography is seldom the first choice. This work proposes a new sustainable method to achieve pure enantiomers in mg scale. Herein, the functionalization of silica for flash chromatography columns with a suitable chiral selector, for subsequent quantitative enantioseparation of chiral compounds, is described. Accordingly, the Whelk-O®1 chiral selector was bonded to flash silica and packed into a reused solid phase extraction cartridge. For the evaluation of the enantioselective performance of the flash column, the enantiomers of a chiral derivative of xanthone were quantitatively enantioseparated with an average recovery of 70% and an enantiomer ratio (e.r.) of 99% and 97% for each enantiomer. Evaluation with the anti-inflammatory drug naproxen was also performed, resulting in an average recovery of 95% and 89% and 95% e.r. for each enantiomer. The flash column showed high stability and load ability, versatility, and good reproducibility.

Determination of Chiral Impurity of Naproxen in Different Pharmaceutical Formulations Using Polysaccharide-Based Stationary Phases in Reversed-Phased Mode

A novel, validated, reversed-phase (RP), chiral high performance liquid chromatography (HPLC) method was developed for the enantiopurity control analysis of naproxen, a frequently used non-steroidal anti-inflammatory agent using polysaccharide-type chiral stationary phase (CSP). In the screening phase of method development, seven columns were tested in polar organic (PO) mode using mobile phases consisting of 0.1% acetic acid in methanol, ethanol, 2-propanol, and acetonitrile. Enantiorecognition was observed only in five cases. The best enantioseparation was observed on a Lux Amylose-1 column with 0.1% (v/v) acetic acid in ethanol with a resolution (R_s) of 1.24. The enantiomer elution order was unfavorable, as the distomer eluted after the eutomer. When the ethanolic mobile phase was supplemented with water, enantiomer elution order reversal was observed, indicating a difference in the enantiorecognition mechanism upon switching from PO to RP mode. Furthermore, by changing ethanol to methanol, not only lower backpressure, but also higher resolution was obtained. Subsequent method optimization was performed using a face-centered central composite design (FCCD) to achieve higher chiral resolution in a shorter analysis time. Optimized parameters offering baseline separation were as follows: Lux Amylose-1 stationary phase, thermostated at 40 °C, and a mobile phase consisting of methanol:water:acetic acid 85:15:0.1 (v/v/v), delivered with 0.65 mL/min flow rate. Using these optimized parameters, a R_s = 3.21 ± 0.03 was achieved within seven minutes. The optimized method was validated according to the ICH guidelines and successfully applied for the analysis of different pharmaceutical preparations, such as film-coated tablets and gel, as well as fixed-dose combination tablets, containing both naproxen and esomeprazole.

Chiral Metal-Organic Frameworks

In the past two decades, metal-organic frameworks (MOFs) or porous coordination polymers (PCPs) assembled from metal ions or clusters and organic linkers via metal-ligand coordination bonds have captivated significant scientific interest on account of their high crystallinity, exceptional porosity, and tunable pore size, high modularity, and diverse functionality. The opportunity to achieve functional porous materials by design with promising properties, unattainable for solid-state materials in general, distinguishes MOFs from other classes of materials, in particular, traditional porous materials such as activated carbon, silica, and zeolites, thereby leading to complementary properties. Scientists have conducted intense research in the production of chiral MOF (CMOF) materials for specific applications including but not limited to chiral recognition, separation, and catalysis since the discovery of the first functional CMOF (i.e., d- or l-POST-1). At present, CMOFs have become interdisciplinary between chirality chemistry, coordination chemistry, and material chemistry, which involve in many subjects including chemistry, physics, optics, medicine, pharmacology, biology, crystal engineering, environmental science, etc. In this review, we will systematically summarize the recent progress of CMOFs regarding design strategies, synthetic approaches, and cutting-edge applications. In particular, we will highlight the successful implementation of CMOFs in asymmetric catalysis, enantioselective separation, enantioselective recognition, and sensing. We envision that this review will provide readers a good understanding of CMOF chemistry and, more importantly, facilitate research endeavors for the rational design of multifunctional CMOFs and their industrial implementation.

Application of Polysaccharide-Based Chiral High-Performance Liquid Chromatography Columns for the Separation of Regio-, E/Z-, and Enantio-Isomeric Mixtures of Allylic Compounds

Daicel Chiralpak IA, IB, and IC, which are the polysaccharide-based chiral stationary phase (CSP) columns for high-performance liquid chromatography (HPLC), were applied in the separation of the non-enantiomeric isomeric mixtures obtained by the various allylation reactions and were highly effective in separating the regio- and (E)/(Z)-isomers in the allylation products. Due to the close structural similarity of the isomeric allylic compounds in the reaction mixtures, separations of the isomers are laborious and could not be accomplished by the conventional methods such as silica gel column chromatography, silica gel HPLC, preparative GPC, distillation, and so forth. This study has shown potential advantages of using the polysaccharide-based CSP columns in the separation of not only enantiomeric but also non-enantiomeric isomeric mixtures.

Our research cooperation with Professor Yoshio Okamoto

This article summarizes our cooperation with the research group of Prof. Yoshio Okamoto at Nagoya University during the period of time between 1992 and 2005. Although the text deals entirely with enantioseparations in high-performance liquid chromatography, capillary electrophoresis, and capillary electrochromatography, this is not a detailed review in any of these areas. The text highlights selected aspects of these techniques, which have been the subject of our joint research and in part their reflection in follow-up research by our and other research groups. Together with more systematically studied topics, aspects such as ultrafast separation of enantiomers, uncommonly high separation factor of enantiomers and other related issues are also addressed.

Are Highly Stable Covalent Organic Frameworks the Key to Universal Chiral Stationary Phases for Liquid and Gas Chromatographic Separations?

High-performance liquid chromatography (HPLC) and gas chromatography (GC) over chiral stationary phases (CSPs) represent the most popular and highly applicable technology in the field of chiral separation, but there are currently no CSPs that can be used for both liquid and gas chromatography simultaneously. We demonstrate here that two olefin-linked covalent organic frameworks (COFs) featuring chiral crown ether groups can be general CSPs for extensive separation not only in GC but also in normal-phase and reversed-phase HPLC. Both COFs have the same 2D layered porous structure but channels of different sizes and display high stability under different chemical environments including water, organic solvents, acids, and bases. Chiral crown ethers are periodically aligned within the COF channels, allowing for enantioselective recognition of guest molecules through intermolecular interactions. The COF-packed HPLC and GC columns show excellent complementarity and each affords high resolution, selectivity, and durability for the separation of a wide range of racemic compounds, including amino acids, esters, lactones, amides, alcohols, aldehydes, ketones, and drugs. The resolution performances are comparable to and the versatility is superior to those of the most widely used commercial chiral columns, showing promises for practical applications. This work thus advances COFs with high stability as potential universal CSPs for chromatography that are otherwise hard or impossible to produce.

Enantioselective metabolomics by liquid chromatography-mass spectrometry

Metabolomics strives to capture the entirety of the metabolites in a biological system by comprehensive analysis, often by liquid chromatography hyphenated to mass spectrometry. A particular challenge thereby is the differentiation of structural isomers. Common achiral targeted and untargeted assays do not distinguish between enantiomers. This may lead to information loss. An increasing number of publications demonstrate that the enantiomeric ratio of certain metabolites can be meaningful biomarkers of certain diseases emphasizing the importance of introducing enantioselective analytical procedures in metabolomics. In this work, the state-of-the-art in the field of LC-MS based metabolomics is summarized with focus on developments in the recent decade. Methodologies, tagging strategies, workflows and general concepts are outlined. Selected biological applications in which enantioselective metabolomics has documented its usefulness are briefly discussed. In general, targeted enantioselective metabolomics assays are often based on a direct approach using chiral stationary phases (CSP) with polysaccharide derivatives, macrocyclic antibiotics, chiral crown ethers, chiral ion exchangers, donor-acceptor phases as chiral selectors. Rarely, these targeted assays focus on more than 20 analytes and usually are restricted to a certain metabolite class. In a variety of cases, pre-column derivatization of metabolites has been performed, especially for amino acids, to improve separation and detection sensitivity. Triple quadrupole instruments are the detection methods of first choice in targeted assays. Here, issues like matrix effect, absence of blank matrix impair accuracy of results. In selected applications, multiple heart cutting 2D-LC (RP followed by chiral separation) has been pursued to overcome this problem and alleviate bias due to interferences. Non-targeted assays, on the other hand, are based on indirect approach involving tagging with a chiral derivatizing agent (CDA). Besides classical CDAs numerous innovative reagents and workflows have been proposed and are discussed. Thereby, a critical issue for the accuracy is often neglected, viz. the validation of the enantiomeric impurity in the CDA. The majority of applications focus on amino acids, hydroxy acids, oxidized fatty acids and oxylipins. Some potential clinical applications are highlighted.