Polyethersulfone solid-phase microextraction followed by liquid chromatography quadrupole time-of-flight mass spectrometry for benzotriazoles determination in water samples

Assessment of benzothiazoles, benzotriazoles and benzenesulfonamides in environmental waters using an optimized combination of microextraction by packed sorbent with programmed temperature vaporization-gas chromatography tandem-mass spectrometry

This work proposes a new method for the quantification of benzothiazoles (BTs), benzotriazoles (BTRs), and benzenesulfonamides (BSAs) in tap water, river water, and wastewater. The protocol involved the use of microextraction by packed sorbent (MEPS), applied for the first time for the extraction of the target analytes, combined with programmed temperature vaporization-gas chromatography-triple quadrupole mass spectrometry (PTV-GC-QqQ-MS). Considering the synergism between MEPS extraction and PTV injection, the experimental variables affecting their performance were simultaneously optimized by "experimental design", while principal component analysis (PCA) was used to find the overall optimal working conditions. Response surface methodology was used to gain a comprehensive understanding of the effects of working variables on method performance. The developed method achieved very good linearities and satisfactory intra- and inter-day accuracies and precisions. The protocol permitted the detection of the target molecules with limit of detection (LODs) values between 0.005 and 0.85 μg/L. The green character of the procedure was evaluated using three metrics: "Analytical Eco-Scale", "Green Analytical Procedure Index" (GAPI), and "Analytical Greenness metric for sample preparation (AGREEprep). The satisfactory results obtained with real water samples demonstrate the applicability of the method for monitoring campaigns and exposome studies.

Simultaneous evaluation of benzotriazoles, benzothiazoles and benzenesulfonamides in water samples from the impacted urban Jacarepaguá Lagoon System (Rio de Janeiro, Brazil) by liquid chromatography coupled to electrospray tandem mass spectrometry

Benzotriazoles, benzothiazoles, and benzenesulfonamides are emerging pollutants stable in aquatic media emitted by anthropogenic sources. Selected compounds of these classes were evaluated in the impacted urban Jacarepaguá Lagoon System (JLS) located in a tropical coastal region of Rio de Janeiro City, Brazil that has experienced a rapid expansion of urban occupation and environmental degradation in recent decades, and it represents a pioneering study of these compounds carried out in Brazilian areas. A method of solid phase extraction followed by ultra-performance liquid chromatography coupled to electrospray tandem mass-spectrometry was implemented to evaluate water samples collected in different water bodies (rivers, lagoons, and channels) of the JLS from March 2017 to May 2018. Limits of quantification (LOQs) ≤ 10.0 ng L^-1, method linearity up to 1000 μg L^-1, and recoveries between 62 and 121 % at three different levels were obtained. Individual concentrations varied from < LOQ to 5260 ng L^-1 (benzotriazole, in May 2018) which also predominated in all river samples. 2-mercaptobenzothiazole predominated in samples taken in lagoons and channels in March 2017, and 2-aminobenzothiazole was never detected. River samples showed total concentrations up to 30 times larger in all sampling campaigns, except March 2017 when the sample taken at Tijuca Lagoon showed the largest total concentration of the compounds studied due to the largest concentration of 2-mercaptobenzothiazole (2505 ng L^-1) found in this study. Principal component analysis (PCA) using only composition data was unable to distinguish samples from rivers, and lagoons and channels, but a PCA combining composition data and environmental parameters (pH, Eh, dissolved O₂ concentration, temperature, salinity, and conductivity) discriminated the samples according to two groups: rivers and lagoons and channels. The Joá Channel flows directly to the open sea and our data allowed a (preliminary) estimation of the total mass flows of the studied compounds to the open sea, which would vary between 1702 g day^-1 (March 2017) to 106 g day^-1 (May 2018) and allowed a preliminary estimative based on the geometric mean of input of 87.9 kg year^-1, indicating the importance of the drainage area to the contamination of the coastal area, and consequently to ocean pollution.

A Review on Polyethersulfone Membranes in Polar Organic Chemical Integrative Samplers: Preparation, Characterization and Innovation

The membranes in polar organic chemical integrative samplers (POCIS) enclose the receiving sorbent and protect it from coming into direct contact with the environmental matrix. They have a crucial role in extending the kinetic regime of contaminant uptake, by slowing down their diffusion between the water phase and the receiving phase. The drive to improve passive sampling requires membranes with better design and enhanced performances. In this review, the preparation of standard polyethersulfone (PES) membranes for POCIS is presented, as well as methods to evaluate their composition, morphology, structure, and performance. Generally, only supplier-related morphological and structural data are provided, such as membrane type, thickness, surface area, and pore diameter. The issues related to the use of PES membranes in POCIS applications are exposed. Finally, alternative membranes to PES in POCIS are also discussed, although no better membrane has yet been developed. This review highlights the urge for more membrane characterization details and a better comprehension of the mechanisms which underlay their behavior and performance, to improve membrane selection and optimize passive sampler development.

Deep eutectic solvent-based ultrasound-assisted emulsification microextraction for the rapid determination of benzotriazole and benzothiazole derivatives in surface water samples

This work describes a simple and environmental-friendly method for the simultaneous determination of five benzotriazole derivatives (BTRs) and four benzothiazole derivatives (BTs) that are frequently found in surface water. The target analytes were efficiently extracted from water samples using a "green" deep eutectic solvent (DES) as the extraction solvent based- ultrasound-assisted emulsification microextraction (DES-USAEME), and their determination were performed by ultrahigh-performance liquid chromatography and electrospray ionization (+)-quadrupole time-of-flight mass spectrometry (UHPLC-ESI(+)-QToF-MS). The DES was composed of a mixture of choline chloride and phenol (molar ratio 1:2). The DES-USAEME factors were optimized by a Box-Behnken Design coupled response surface methodology. The developed method was validated, providing limits of quantitation (LOQs; 02 μg L^-1), high precisions (1-8%), and satisfactory mean spiked recoveries (72-104 %). Relatively high total concentrations of the target analytes were found in samples collected from a reservoir (47.2-101.3 μg L^-1), which may have been released from tire-wear particles and scrap tires from buses and old tires that were strung alongside the shuttle boats to prevent the boats from coming into contact with each other or from impacting against the dock during docking. This is the first study on the occurrence of BTRs and BTs in reservoir samples.

Bar Adsorptive Microextraction Coated with Carbon-based Phase Mixtures for Performance-Enhancement to Monitor Selected Benzotriazoles, Benzothiazoles, and Benzenesulfonamides in Environmental Water Matrices

: In the present work we propose, for the first time, bar adsorptive microextraction coated with carbon-based phase mixtures, followed by microliquid desorption and high performance liquid chromatography-diode array detection (BAμE-μLD/HPLC-DAD) analysis, to enhance the performance of the determination of traces of benzotriazoles (BTRs), benzothiazoles (BTs), and benzenesulfonamide derivatives (BSDs) in environmental water matrices. Assessing six carbon-based sorbents (CA1, CN1, B test EUR, SX PLUS, SX 1, and R) with different selectivity properties allowed us to tailor the best phase mixture (R, 12.5%/CN1, 87.5%) that has convenient porosity, texture, and surface chemistry (pHPZC,mix ~6.5) for trace analysis of benzenesulfonamide, 1-hydroxybenzotriazole, 1H-benzotriazole, 5-methyl-1H-benzotriazole, benzothiazole, and 1,3-benzothiazol-2-ol chemicals in aqueous media. Optimized experimental conditions provided average recoveries ranging from 37.9% to 59.2%, appropriate linear dynamic ranges (5.0 to 120.0 µg L-1; r2 ≥ 0.9964), limits of detection between 1.0 and 1.4 μg L-1, and good precisions (relative standard deviation (RSD) ≤ 9.3%). The proposed methodology (BAμE(R, 12.5%/CN1, 87.5%)-μLD/HPLC-DAD) also proved to be a suitable sorption-based static microextraction alternative to monitor traces of BTRs, BTs, and BSDs in rain, waste, tap, and estuarine water samples. From the data obtained, the proposed approach showed that the BAμE technique with the addition of lab-made devices allows users to adapt the technique to use sorbents or mixtures of sorbents with the best selectivity characteristics whenever distinct classes of target analytes occur simultaneously in the same application.

Solid-Phase Extraction of Polar Benzotriazoles as Environmental Pollutants: A Review

Polar benzotriazoles are corrosion inhibitors with widespread use; they are environmentally characterized as emerging pollutants in the water system, where they are present in low concentrations. Various extraction methods have been used for their separation from various matrices, ranging from classical liquid–liquid extractions to various microextraction techniques, but the most frequently applied extraction technique remains the solid-phase extraction (SPE), which is the focus of this review. We present an overview of the methods, developed in the last decade, applied for the determination of benzotriazoles in aqueous and solid environmental samples. Several other matrices, such as human urine and plant material, are also considered in the text. The methods are reviewed according to the determined compounds, sample matrices, cartridges and eluents used, extraction recoveries and the achieved limits of quantification. A critical evaluation of the advantages and drawbacks of the published methods is given.

Assessment of commercially available polymeric materials for sorptive microextraction of priority and emerging nonpolar organic pollutants in environmental water samples

Among the different organic pollutants, persistent organic pollutants and emerging organic contaminants (EOCs) are of particular concern due to their potentially dangerous effects on the ecosystems and on human health. In the framework of the analysis of some of these organic pollutants in water samples, sorptive extraction devices have proven to be adequate for their monitoring. The efficiency of four commercially available and low-cost polymeric materials [polypropylene, poly(ethylene terephthalate), Raffia, and polyethersulfone (PES)] for the simultaneous extraction of 16 organic compounds from five different families from environmental water samples was evaluated in this work. Firstly, the homogeneity of the sorbent materials was confirmed by means of Raman spectroscopy. After the optimization of the parameters affecting the extraction and the liquid desorption steps, it was found that PES showed the largest efficiencies for slightly polar analytes and, to a lesser extent, for nonpolar analytes. Additionally, Raffia rendered good extraction efficiencies for nonpolar compounds. Thus sorptive extraction methods followed by large volume injection-programmable temperature vaporizer-gas chromatography-mass spectrometry were validated using PES and Raffia as sorbent materials. The validation of the method provided good linearity (0.978 < r (2) < 0.999 for PES and 0.977 < r (2) < 0.999 for Raffia), adequate repeatability (below 19 % and 14 % for PES and Raffia, respectively), and low method detection limits (low ng · l(-1) level). Finally, these materials were applied to the analysis of contaminants in environmental water samples.

Evaluation of polyethersulfone performance for the microextraction of polar chlorinated herbicides from environmental water samples

In this work, the suitability of bulk polyethersulfone (PES) for sorptive microextraction of eight polar, chlorinated phenoxy acids and dicamba from environmental water samples is assessed and the analytical features of the optimized method are compared to those reported for other microextraction techniques. Under optimized conditions, extractions were performed with samples (18 mL) adjusted at pH 2 and containing a 30% (w/v) of sodium chloride, using a tubular PES sorbent (1 cm length × 0.7 mm o.d., sorbent volume 8 µL). Equilibrium conditions were achieved after 3h of direct sampling, with absolute extraction efficiencies ranging from 39 to 66%, depending on the compound. Analytes were recovered soaking the polymer with 0.1 mL of ethyl acetate, derivatized and determined by gas chromatography-mass spectrometry (GC-MS). Achieved quantification limits (LOQs) varied between 0.005 and 0.073 ng mL(-1). After normalization with the internal surrogate (IS), the efficiency of the extraction was only moderately affected by the particular characteristics of different water samples (surface and sewage water); thus, pseudo-external calibration, using spiked ultrapure water solutions, can be used as quantification technique. The reduced cost of the PES polymer allowed considering it as a disposable sorbent, avoiding variations in the performance of the extraction due to cross-contamination problems and/or surface modification with usage.