Screening of organic chemicals associated to virgin low-density polyethylene microplastic pellets exposed to the Mediterranean Sea environment by combining gas chromatography and liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry

In this work, organic chemicals associated with microplastics (MPs) exposed to a coastal anthropogenized environment for up to eight weeks have been screened for, in order to discern the (de)sorption dynamics of chemicals in the marine ecosystem. Low-density polyethylene (LDPE) pellets were studied since they represent primary MPs used by the plastic industry and a relevant input of MPs into the oceans. To maximize the coverage of chemicals that could be detected, both liquid and gas chromatography coupled to quadrupole-time-of-flight (GC-QTOF and LC-QTOF, respectively) were used. In the case of LC-QTOF, an electrospray ionization source was employed, and the compounds were investigated by combining suspect and non-target screening workflows. The GC-QTOF was equipped with an electron ionization source and compounds were screened in raw and derivatized (silylated) extracts by deconvolution and contrast to high- and low-resolution libraries. A total of 50 compounds of multifarious classes were tentatively identified. Among them, melamine and 2-ethylhexyl salicylate (EHS) were detected in the original MPs but were rapidly desorbed. Melamine was completely released into the marine environment, while EHS was partly released but a portion remained bound to the MPs. On the other hand, many other chemicals of both anthropogenic (e.g. phenanthrene or benzophenone) and natural origin (e.g. betaine and several fatty acids) accumulated onto MPs over time. Quantification of 12 unequivocally identified chemicals resulted into a total concentration of 810 μg/kg after MPs exposure for 8 weeks.

Occurrence and risk assessment of pesticides and pharmaceuticals in viticulture impacted watersheds from Northwest Spain

An automated analytical methodology was developed, validated and applied to monitor 73 organic pollutants (pesticides and pharmaceuticals) in surface and groundwater samples obtained in watersheds from an intensive viticulture, rural region, in the Northwest of Spain. Filtered samples were concentrated using a reusable solid-phase extraction sorbent, on-line combined with liquid chromatography tandem mass spectrometry (LC-MS/MS). The analytical procedure achieved limits of quantification between 1 ng L-1 and 10 ng L-1, with a throughput of 2 samples hour-1, providing accurate recoveries for more than 90% of the 73 selected compounds, using calibration solutions prepared in ultrapure water (in presence of methanol and formic acid) as neat solvent. The distribution and the concentrations of pesticides in small streams impacted by discharges of treated municipal wastewaters were different in rural and residential areas. On the other hand, pharmaceuticals showed a similar distribution in both streams. In surface waters from viticulture impacted watersheds, with a limited influence of municipal wastewaters, pulses of pesticides were noticed, with values above 100 ng L-1 for several fungicides. Cardiovascular pharmaceuticals, psychiatric drugs and/or their transformation products were also ubiquitous in these samples, with low, but relatively stable concentrations among sampling campaigns. Within the suite of investigated compounds, maximum pesticide residues remained below their predicted-non effect concentration (PNEC) in all samples. On the other hand, the environmental concentrations of the cardiovascular drug olmesartan stayed systematically above its PNEC in fresh water samples.

Direct, automated and sensitive determination of glyphosate and related anionic pesticides in environmental water samples using solid-phase extraction on-line combined with liquid chromatography tandem mass spectrometry

An automated procedure for the simultaneous determination of six anionic pesticides, including glyphosate (GLY) and its transformation product aminomethylphosphonic acid (AMPA), was developed and applied to the analysis of environmental water samples. The proposed method combines on-line concentration of water samples (0.160 mL), with compounds separation in an anion-exchange liquid chromatography (LC) column, followed by their selective determination by tandem mass spectrometry (MS/MS). The global procedure was completed in 25 min, providing limits of quantification (LOQs) between 5 ng L^-1 and 20 ng L^-1, with reduced effect of the surface water matrix in the efficiency of process (SPE and ionization yields). The method was applied to the analysis of grab samples obtained from three watersheds, in two rural and one residential area, in Galicia (Northwest Spain). Out of six investigated compounds, Fosetyl, AMPA and GLY were noticed in the set of processed samples. Their detection frequencies increased from 12% (Fosetyl) to 88% (AMPA). Median concentrations followed the same trend varying from 9 ng L^-1 (Fosetyl) to 44 ng L^-1 (AMPA). The higher levels and the large seasonal variations in the residues of the latter species were noticed in small rivers affected by discharges of municipal sewage treatment plants (STPs).

Use of illicit drugs, alcohol and tobacco in Spain and Portugal during the COVID-19 crisis in 2020 as measured by wastewater-based epidemiology

The COVID-19 pandemic spread rapidly worldwide in the year 2020, which was initially restrained by drastic mobility restrictions. In this work, we investigated the use of illicit drugs (amphetamine, methamphetamine, ecstasy, cocaine and cannabis), and licit substances of abuse (alcohol and tobacco) during the earlier months (March-July 2020) of the pandemic restrictions in four Spanish (Bilbao and its metropolitan area, Vitoria-Gasteiz, Castellón and Santiago de Compostela) and two Portuguese (Porto and Vila do Conde) locations by wastewater-based epidemiology (WBE). The results show that no methamphetamine was detected in any of the locations monitored, while amphetamine use was only detectable in the two locations from the Basque Country (Bilbao and its metropolitan area and Vitoria-Gasteiz), with high estimated average usage rates (700-930 mg day-1 1000 inhabitant-1). The remaining substances were detected in all the investigated catchment areas. In general, no remarkable changes were found in population normalized loads compared to former years, except for cocaine (i.e. its main metabolite, benzoylecgonine). For this drug, a notable decrease in use was discernible in Castellón, while its usage in Porto and Santiago de Compostela seemed to continue in a rising trend, already initiated in former years. Furthermore, two events of ecstasy (3,4-methylenedioxymethamphetamine, MDMA) dumping in the sewage network were confirmed by enantiomeric analysis, one in Santiago de Compostela just prior the lockdown and the second one in the Bilbao and its metropolitan area in July after relieving the more stringent measures. The latter could also be associated with a police intervention. The comparison of WBE with (web) survey data, which do not provide information at a local level, points towards contradictory conclusions for some of the substances, thereby highlighting the need for stable WBE networks capable of near real-time monitoring drug use.

Mimicking human ingestion of microplastics: Oral bioaccessibility tests of bisphenol A and phthalate esters under fed and fasted states

Notwithstanding the fact that microplastic fragments were encountered in the human stool, little effort has been geared towards elucidating the impact of chemical additives upon the human health. In this work, standardized bioaccessibility tests under both fasting and fed conditions are herein applied to the investigation of human oral bioaccessibility of plastic additives and monomers (i.e. eight phthalate esters (PAEs) and bisphenol A (BPA)) in low-density polyethylene (LDPE) and polyvinyl chloride (PVC) microplastics. The generation of phthalate monoesters is evaluated in the time course of the bioaccessibility tests. Maximum gastric and gastrointestinal bioaccessibility fractions are obtained for dimethyl phthalate, diethyl phthalate and BPA, within the range of 55-83%, 40-68% and 37-67%, respectively, increasing to 56-92% and 41-70% for dimethyl phthalate and diethyl phthalate, respectively, whenever their hydrolysis products are considered. Bioaccessibility fractions of polar PAEs are dependent upon the physicochemical characteristics of the microplastics, with greater bioaccessibility for the rubbery polymer (LDPE). With the method herein proposed, oral bioaccessible pools of moderately to non-polar PAEs can be also accurately assessed for risk-assessment explorations, with values ranging from 1.8% to 32.2%, with again significantly larger desorption percentages for LDPE. Our results suggested that the highest gastric/gastrointestinal bioaccessibility of the eight PAEs and BPA is reached under fed-state gastrointestinal extraction conditions because of the larger amounts of surface-active biomolecules. Even including the bioaccessibility factor within human risk assessment/exposure studies to microplastics, concentrations of dimethyl phthalate, di-n-butyl phthalate and BPA exceeding 0.3% (w/w) may pose severe risks after oral uptake in contrast to the more hydrophobic congeners for which concentrations above 3% (w/w), except for diethylhexyl phthalate, would be tolerated.

Approaches to liquid chromatography tandem mass spectrometry assessment of glyphosate residues in wine

The performance of two different analytical methodologies to investigate the presence of glyphosate (GLY) and aminomethylphosphonic acid (AMPA) residues in wine samples was evaluated. Transformation of compounds in their fluorene-9-methyloxycarbonyl derivatives permitted their separation under reversed-phase liquid chromatography with tandem mass spectrometry (LC-MS/MS) determination. Although the wine matrix severely impaired the efficiency of GLY derivatization, this drawback was solved using a molecularly imprinted sorbent for the previous, selective extraction of GLY and AMPA from wine. Alternatively, the use of a strong anionic exchange, polyvinyl alcohol-based LC column, turned to be the most effective alternative for direct determination of both compounds in diluted wine samples. The chromatographic behavior of this column and the magnitude of matrix effects observed during analysis of diluted wine samples were significantly affected by the composition of the mobile phase. Under final working conditions, this column permitted the separation of AMPA and the fungicide fosetyl (which shows common transitions in tandem MS/MS methods), it improved significantly the sample throughput versus extraction-derivatization-purification method, and it allowed the use of solvent-based calibration standards. Both analytical procedures provided similar limits of quantification (LOQs) for GLY (0.5-1.0 ng mL-1), while the multistep method was 8 times more sensitive to AMPA than the direct procedure. GLY residues stayed above method LOQs in 70% of the processed wines; however, concentrations measured in 95% of positive samples remained 100 times below the maximum residue limit (MRL) set for GLY in vinification grapes.

Transformation products of the high-volume production chemicals 1-vinyl-2-pyrrolidinone and 2-piperazin-1-ylethanamine formed by UV photolysis

This work investigates the reaction of 1-vinyl-2-pyrrolidinone (VP) and 2-piperazin-1-yletanamine (PPE) under UV radiation. Both substances are high-volume production chemicals (production >1000 tons/year) widely used in polymers, coatings and a wide array of applications, which have been classified as mobile chemicals and which can then lead to the formation of persistent and mobile transformation products (TPs). Thus, their reaction with UV light was studied by means of liquid chromatography-quadrupole-time-of-flight-mass spectrometry (LC-QTOF-MS). Both compounds presented a high reactivity, the VP quantum yield was 0.28 mol/E; whereas, PPE had a quantum yield notably higher than 1 (16 mol/E). Five and 7 TPs were identified for VP and PPE, respectively. Some of them had been already reported in literature due to sunlight photodegradation or other oxidation processes, but most of them are reported here for the first time. Finally, the acute and chronical toxicity of precursors and TPs were estimated using two quantitative structure-activity relationship (QSAR) software tools which led to some discrepancies in the estimations, pointing to the need for experimental toxicity assays for these compounds.

Development and application of an in-house library and workflow for gas chromatography-electron ionization-accurate-mass/high-resolution mass spectrometry screening of environmental samples

This work presents an optimized gas chromatography–electron ionization–high-resolution mass spectrometry (GC-EI-HRMS) screening method. Different method parameters affecting data processing with the Agilent Unknowns Analysis SureMass deconvolution software were optimized in order to achieve the best compromise between false positives and false negatives. To this end, an accurate-mass library of 26 model compounds was created. Then, five replicates of mussel extracts were spiked with a mixture of these 26 compounds at two concentration levels (10 and 100 ng/g dry weight in mussel, 50 and 500 ng/mL in extract) and injected in the GC-EI-HRMS system. The results of these experiments showed that accurate mass tolerance and pure weight factor (combination of reverse-forward library search) are the most critical factors. The validation of the developed method afforded screening detection limits in the 2.5–5 ng range for passive sampler extracts and 1–2 ng/g for mussel sample extracts, and limits of quantification in the 0.6–3.2 ng and 0.1–1.8 ng/g range, for the same type of samples, respectively, for 17 model analytes. Once the method was optimized, an accurate-mass HRMS library, containing retention indexes, with ca. 355 spectra of derivatized and non-derivatized compounds was generated. This library (freely available at https://doi.org/10.5281/zenodo.5647960), together with a modified Agilent Pesticides Library of over 800 compounds, was applied to the screening of passive samplers, both of polydimethylsiloxane and polar chemical integrative samplers (POCIS), and mussel samples collected in Galicia (NW Spain), where a total of 75 chemicals could be identified.

Source identification of amphetamine-like stimulants in Spanish wastewater through enantiomeric profiling

Amphetamine (AMP), methamphetamine (MAMP) and 3,4-methylenedioxymethamphetamine (MDMA) occur in wastewater not only as a result of illicit consumption, but also, in some cases, from prescription drug use or by direct drug disposal into the sewage system. Enantiomeric profiling of these chiral drugs could give more insight into the origin of their occurrence. In this manuscript, a new analytical methodology for the enantiomeric analysis of amphetamine-like substances in wastewater has been developed. The method consists of a solid-phase extraction (SPE) followed by liquid chromatography-triple quadrupole-tandem mass spectrometry (LC-MS/MS), which showed low quantification limits in the 2.4-5.5 ng L^-1 range. The LC-MS/MS method was first applied to characterize a total of 38 solid street drug samples anonymously provided by consumers. The results of these analysis showed that AMP and MDMA trafficked into Spain are synthesized as racemate, while MAMP is exclusively produced as the S(+)-enantiomer. Then, the analytical method was employed to analyse urban wastewater samples collected from the wastewater treatment plants (WWTPs) of five different cities in 2018 and 2019. Consumption estimated through normalized population loads in wastewater showed an increased pattern of AMP use in the Basque Country. Furthermore, the enantiomeric profiling of wastewater samples was contrasted to lisdexamfetamine (LIS) and selegiline (SEL) prescription figures, two pharmaceuticals which metabolize to S(+)-AMP, and to R(-)-AMP and R(-)-MAMP, respectively. From this analysis, and considering uncertainties derived from metabolism and adherence to treatment, it was concluded that LIS is a relevant source of AMP in those cases with low wastewater loads, i.e. up to a maximum of 60% of AMP detected in wastewater in some samples could originate from LIS prescription, while SEL does not represent a significant source of AMP nor MAMP. Finally, removal efficiencies could be evaluated for the WWTP (serving ca. 860,000 inhabitants) with higher AMP influent concentrations. The removal of AMP was satisfactory with rates higher than 99%, whereas MDMA showed an average removal of approximately 60%, accompanied by an enrichment of R(-)-MDMA.

Assessment of direct analysis in real time accurate mass spectrometry for the determination of triclosan in complex matrices

In this work, the applicability of direct analysis in real time coupled to accurate mass spectrometry (DART-MS) to the quantitative determination of triclosan (TCS) in samples with increasing complexity, from personal care products to extracts from sewage, is investigated. In the first term, DART-MS spectra of TCS as free phenol and as derivatized species are characterized; thereafter, the effects of several instrumental variables in the detectability of TCS (i.e., temperature, solvent, and compound holder) are discussed. Under final selected conditions, TCS was determined from its [M-H]⁻ ions, without need of derivatization, attaining an instrumental limit of quantification of 5 ng mL⁻¹, with a linear response range up to 1000 ng mL⁻¹. Complex matrices, such as solid-phase extracts obtained from environmental water samples, moderately inhibited the ionization efficiency of TCS, with signal attenuation percentages in the range of 6 to 57%, depending on the sample type and on the concentration factor provided by the SPE procedure. The accuracy of results obtained by DART-MS was evaluated using liquid chromatography (LC) with MS detection; in both cases, a time-of-flight (TOF) MS instrument was employed for the selective determination of the [M−H]⁻ ions of TCS (m/z values 286.9439 and 288.9410) using a mass window of 20 ppm. DART-MS did not only provide enough sensitivity to detect the presence of TCS in environmental samples (raw and treated wastewater as well as freeze-dried sludge), but also measured concentrations matched those determined by LC-ESI-TOF-MS, with only slightly higher standard deviations. During analysis of personal care products, containing much higher concentrations of TCS in a less complex matrix, both techniques were equivalent in terms of accuracy and precision.

Identification and determination of emerging pollutants in sewage sludge driven by UPLC-QTOF-MS data mining

Sludge from sewage treatment plants (STPs) is recognized as a sink of moderate to high lipophilic compounds resistant to biodegradation. Herein, we investigate the presence of emerging pollutants in sewage sludge combining the information provided by mass spectrometry detection, following ultra-performance liquid chromatography (UPLC), with the use of an accurate spectral database of pesticides and pharmaceuticals. In a first step, the performance of matrix solid-phase dispersion, as sample preparation technique, and two non-target data acquisition strategies (data dependent, DDA, and data independent analysis modes, DIA), used in combination with a UPLC quadrupole time-of-flight system, are assessed using a selection of deuterated compounds added either to freeze-dried sludge samples, or to sludge extracts. Possibilities and limitations of both modes are discussed. Following the DDA approach, a group of 68 micropollutants was identified in sludge from different STPs. Some of them are reported in this compartment for the first time. Finally, semi-quantitative concentration data are reported for a group of 37 pollutants in samples obtained from 16 STPs. Out of them, 10 pharmaceuticals, showing detection frequencies and median sludge residues above 50% and 100 ng g^-1, respectively; are highlighted as pollutants to be monitored in sludge in order to understand their behaviour during the wastewater treatment.

Supercritical fluid chromatography-mass spectrometric determination of chiral fungicides in viticulture-related samples

Supercritical fluid chromatography (SFC), combined with mass spectrometry (MS), was employed for the determination of five chiral fungicides, from two different chemical families (acylalanine and triazol) in wine and vineyard soils. The effect of different SFC parameters (stationary phase, chiral selector, mobile phase modifier and additive) in the resolution between enantiomers and in the efficiency of compounds ionization at the electrospray source (ESI) was thorougly described. Under final working conditions, chiral separations of selected fungicides were achieved using two different SFC-MS methods, with an analysis time of 10 min and resolution factors from 1.05 to 2.45 between enantiomers. In combination with solid-phase extraction and pressurized liquid extraction, they permitted the enantiomeric determination of target compounds in wine and vineyard soils with limits of quantification in the low ppb range (between 0.5 and 2.5 ng mL^-1, and from 1.3 to 6.5 ng g^-1, for wine and soil, respectively), and overall recoveries above 80%, calculated using solvent-based standards. For azolic fungicides (tebuconazole, myclobutanil and penconazole) soil dissipation and transfer from vines to wines were non-enantioselective processes. Data obtained for acylalanine compounds confirmed the application of metalaxyl (MET) to vines as racemate and as the R-enantiomer. The enantiomeric fractions (MET-S/(MET-S+MET-R)) of this fungicide in vineyard soils varied from 0.01 to 0.96; moreover, laboratory degradation experiments showed that the relative dissipation rates of MET enantiomers varied depending on the type of soil.

Assessment of UV combined with free chlorine for removal of valsartan acid from water samples

Valsartan acid (VALA) is a persistent and mobile pollutant, ubiquitously distributed in the aquatic environment. Herein, we assessed the efficiency of UV/free chlorine for the removal of this pollutant. Degradation experiments were performed using different water samples, considering several pH values and concentrations of inorganic anions. Time-course of VALA was measured by injection of different reaction time aliquots in a liquid chromatography (LC) triple quadrupole (QqQ) mass spectrometry (MS) system, whilst the study of potential transformation products (TPs) was evaluated by LC combined with a hybrid quadrupole time-of-flight (QTOF) MS system. Formation of volatile disinfection by-products (DBPs) was investigated by gas chromatography (GC) with TOF-MS detection. Compared to free chlorine treatment and UV photolysis, the combination of both parameters significantly enhanced the degradability of VALA. At neutral pH, UV/free chlorine was also more effective than UV/H₂O₂ to remove VALA from spiked water solutions. Three TPs of VALA were tentatively identified by LC-QTOF-MS, although only one was stable in the UV/free chlorine media. As regards volatile DBPs, the formation of chloroform, dichloroacetonitrile, di- and trichloroacetic acid was noticed. The mass yield of DBPs formation from VALA varied from 0.3% (dichloroacetonitrile) to 1.1% (chloroform). The efficiency of UV/free chlorine was first investigated in spiked solutions with increasing complexities: ultrapure, river and treated wastewater. Thereafter, the feasibility of reducing VALA levels in polluted river water was demonstrated.

Reaction of phenazone-type drugs and metabolites with chlorine and monochloramine

This work studies the chlorination and monochloramination reaction kinetics of two phenazone-type drugs (phenazone - Phe and propyphenazone - PrPhe) and three metabolites of phenazone-type drugs (4-formylaminoantipyrine - FAA, 4-aminoantipyrine - AA and 4-acetoamidoantipyrine - AAA). Kinetics were faster with chlorine (apparent second-order constants between 100 and 66,500 times higher) than with monochloramine. For FAA and AAA, no significant reaction was observed during monochloramination. Further, apparent rate constants decreased as the pH increased from pH 5.7 to 8.3, except during chlorination of AA. The transformation products (TPs) formed were also elucidated by liquid chromatography-high resolution mass spectrometry. The main transformation pathway for Phe and PrPhe consisted of halogenations, hydroxylations and dealkylations, while AAA and FAA were firstly transformed to AA, then followed by pyrazole ring opening and hydroxylations. The extend of the reaction was also tested in real water samples, where, in general, slower reaction kinetics were obtained during monochloramination, while the chlorination reaction showed similar half-lives to ultrapure water. Finally, acute and chronic toxicity of the TPs were estimated using two quantitative structure-activity relationship (QSAR) software (ECOSAR and TEST), showing that some TPs could be more toxic than their precursor compounds.

Combination of different chromatographic and sampling modes for high-resolution mass spectrometric screening of organic microcontaminants in water

This study explores the combination of two sampling strategies (polar organic compounds integrative sampler (POCIS) vs. spot sampling) and four chromatographic retention modes (reversed-phase liquid chromatography (RPLC), hydrophilic interaction liquid chromatography (HILIC), mixed-mode liquid chromatography (MMLC) and supercritical fluid chromatography (SFC)) for high-resolution mass spectrometry (HRMS) screening of organic pollutants in water samples. To this end, a suspect screening approach, using iterative data-dependent tandem mass spectrometry (MS/MS) driven by a library of 3227 chemicals (including pharmaceuticals, pesticides, drugs of abuse, human metabolites, industrial chemicals and other pollutants), was employed. Results show that POCIS can afford a larger number of positive identifications as compared to spot sampling. On the other hand, the best suited retention mechanisms, in terms of identified analytes, are SFC, and followed by RPLC, MMLC and HILIC. However, the best combination (POCIS + SFC) would only allow the identification of 67% of the detected analytes. Thus, the combination of the two sampling strategies, spot and passive sampling, with two orthogonal retention mechanisms, RPLC and SFC, is proposed in order to maximize the number of analytes detected (89%). This strategy was applied to different surface water (river and estuary) samples from Galicia (NW Spain). A total of 155 compounds were detected at a confidence level 2a, from which the major class was pharmaceuticals (61%).

Assessing population exposure to phthalate plasticizers in thirteen Spanish cities through the analysis of wastewater

Phthalates are widely used plasticizers that produce endocrine-disrupting disorders. Quantifying exposure is crucial to perform risk assessments and to develop proper health measures. Herein, a wastewater-based epidemiology approach has been applied to estimate human exposure to six of the mostly used phthalates within the Spanish population. Wastewater samples were collected over four weekdays from seventeen wastewater treatment plants serving thirteen cities and ca. 6 million people (12.8 % of the Spanish population). Phthalate metabolite loads in wastewater were transformed into metabolite concentrations in urine and into daily exposure levels to the parent phthalates. Considering all the sampled sites, population-weighted overall means of the estimated concentrations in urine varied between 0.7 ng/mL and 520 ng/mL. Very high levels, compared to human biomonitoring data, were estimated for monomethyl phthalate, metabolite of dimethyl phthalate. This, together with literature data pointing to other sources of this metabolite in sewage led to its exclusion for exposure assessments. For the remaining metabolites, estimated concentrations were closer to those found in urine. Their 4-days average exposure levels ranged from 2 to 1347 μg/(day∙inh), exceeding in some sites the daily exposure thresholds set for di-i-butyl phthalate and di-n-buthyl phthalate by the European Food Safety Authority.

Multiresidue procedure to assess the occurrence and dissipation of fungicides and insecticides in vineyard soils from Northwest Spain

The presence of fungicide and insecticide residues in wine has been largely investigated. However, few studies have addressed the persistence of these compounds in vineyard soils. In this research, we investigate the residues of a relevant number of fungicides and insecticides in vineyard soils, obtained in the Northwest of Spain, at the beginning of each agriculture campaign. Moreover, the dissipation of species showing high concentrations were monitored during the non-vegetative period of vines, in order to understand their soil evolution between application campaigns. To this end, a multiresidue analytical procedure based on pressurized liquid extraction (PLE) followed by liquid chromatography tandem mass spectrometry (LC-MS/MS) determination was first optimized. Under final working conditions, absolute recoveries in the range from 70 to 130% were achieved for 44 out of 51 selected compounds. The method LOQs remained at the low ng g^-1 level (0.2-13 ng g^-1) with a linear response range up to 500 ng g^-1. Analysis of vineyard soils, collected during a 2-year period, from a geographic area with a high incidence of fungal diseases, demonstrated the presence of relevant concentrations of several fungicides and the insecticide imidacloprid (IMI) in this compartment. Most compounds detected at the end of the application season remained in soil at the beginning of the next year campaign. Among them, six fungicides (dimethomorph, boscalid, myclobutanil, penconazole, pyraclostrobin and pyrimethanil) and IMI showed average dissipation efficiencies below 50%, so they pose a potential to accumulate in this kind of soils.

Comprehensive determination of phthalate, terephthalate and di-iso-nonyl cyclohexane-1,2-dicarboxylate metabolites in wastewater by solid-phase extraction and ultra(high)-performance liquid chromatography-tandem mass spectrometry

Plasticizers are chemical compounds used in the production of flexible plastics for a large variety of applications. They are present in most of the environments and, hence, we are highly exposed to them via several routes (ingestion, inhalation, etc). Due to the endocrine disruption potential of some of these chemicals and the unknown toxicological effects of their alternatives, assessing human exposure to these contaminants is an issue of emerging concern. Herein we propose an analytical methodology for the determination of several plasticizer metabolites in wastewater as a non-invasive, cheap, and fast exposure monitoring tool complementary to the analysis of urine. A solid-phase extraction procedure followed by an ultra(high)-performance liquid chromatography-tandem mass spectrometry method was optimized and validated for 21 analytes among phthalate, terephthalate, and di-iso-nonyl cyclohexane-1,2-dicarboxylate metabolites. Method quantification limits ranged from 0.079 to 4.4 ng L^-1. The method was applied to the analysis of seven daily composite wastewater samples collected in the NW of Spain. Metabolites of low molecular weight phthalates and of di-2-ethylhexyl phthalate were quantified in all samples, despite the existing regulations limiting the use of phthalates. Metabolites of terephthalates, introduced at the end of the 20th century as phthalate substituents, were also quantified in all samples, being the first time that they were detected in this matrix. Exposure back-calculation highlighted di-2-ethylhexyl terephthalate as the second most common plastic additive after diethyl phthalate in the population considered, reflecting the increasing substitution of di-2-ethylhexyl phthalate by its analogous terephthalate.

First nation-wide estimation of tobacco consumption in Spain using wastewater-based epidemiology

Wastewater-based epidemiology (WBE) has become a very useful tool to monitor a population's drug consumption or exposure to environmental and food contaminants. In this work, WBE has been applied to estimate tobacco consumption in seven Spanish regions. To this end, 24 h composite wastewater samples were taken daily for one week in 17 wastewater treatment plants, covering altogether a population of ca. 6 million inhabitants. The samples were treated by enzymatic deconjugation and the wastewater content of two human-specific nicotine metabolites (namely, cotinine and trans-3'-hydroxycotinine) was measured to estimate the daily consumption of nicotine. The population-weighted average nicotine consumption in the seven analyzed regions was 2.2 g/(day∙1000 inh.), without any daily pattern. This average estimated nicotine consumption value agreed with the value derived from official tobacco sales data. Differences in consumption among the seven studied regions were found, being Galicia, the region with the lowest rate, and the Basque Country and Catalonia those with the highest rates. However, no conclusive correlation was found between those values and the prevalence data taken from two different national surveys, nor sociodemographic and health data. This study demonstrates that this tool can complement other indicators in order to accurately assess tobacco consumption rates at regional and national levels and provides the most extensive application of the approach in the Spanish territory.

Portable dehumidifiers condensed water: A novel matrix for the screening of semi-volatile compounds in indoor air

The comprehensive identification of organic species existing in indoor environments is a key issue to understand their impact in human health. This study proposes the analysis of condensed water samples, collected with portable dehumidifiers, to characterize semi-volatile compounds in the gas phase of confined areas. Water samples are concentrated by solid-phase extraction (SPE). The obtained extracts are analysed by gas chromatography (GC) time-of-flight mass spectrometry (TOF-MS), following a non-target screening data mining approach. In first term, spectra of deconvoluted compounds are compared with those in NIST low resolution library; thereafter, tentative identifications are verified using an in-house database of accurate electron ionization (EI) MS spectra. Chromatographic (retention index) and spectral data are combined for unambiguous species identification. The potential of condensed water samples to reflect changes in the composition of indoor atmospheres, the match between data obtained using different dehumidifiers, and the relative concentration efficiency of condensed water compared to that attained by active sampling of moderate air volumes are discussed. A total of 141 semi-volatile compounds were identified (98 confirmed against authentic standards) in a set of 21 samples obtained from different homes and working places. This list contains more than 40 fragrances (including several potential allergens), solvents and intermediates in the production of polymeric materials, plasticizers and flame retardants.

Chlorination and bromination of 1,3-diphenylguanidine and 1,3-di-o-tolylguanidine: Kinetics, transformation products and toxicity assessment

This works investigates the chlorination and bromination of two rubber and polymer related chemicals, which have emerged as relevant water contaminants, i.e. 1,3-di-o-tolylguanidine (DTG) and 1,3-diphenylguanidine (DPG). Kinetic constants at different pH values were obtained and modelled, taking into account the pK_a values of DTG/DPG and HClO, showing that the maximum reaction rate (k_app > 10⁴ M^-1 s^-1) is obtained at pH values 8.8 for DPG and 9.1 for DTG. Bromination is also very fast, although unlike chlorination, deviation from the model was observed at neutral pH, which was attributed to formation of metastable transformation product (TP). A total of 35 TPs, corresponding to halogenation, hydroxylation, formation of monophenylguanidine derivatives and cyclization reactions, were tentatively identified. Furthermore it was found that chloroform can be formed up to a 25% molar yield, while dichloroacetonitrile was formed into less than a 3% yield. Several ecotoxicological endpoints were predicted by quantitative structure-activity relationship models (QSAR) for the TPs, some of which were predicted to be more toxic than DPG/DTG. Also a chlorinated solution investigated by a Vibrio Fisheri acute toxicity test, confirmed that toxicity increases with chlorination.

Selective Determination of Methyl Mercury in Biological Samples by Means of Programmed Temperature Gas Chromatography

A programmed temperature gas chromatographic method is presented by which it is possible to carry out routine analysis of methyl mercury in biological samples prepared according to the AOAC official first action recommendations without the need for preliminary treatment of the columns. This method greatly extends the life of the columns as well as the useful time for analysis; it has good linearity and repeatability. With the proposed method a total of 36 samples can be analyzed daily.

Application of Strategically Designed Sample Composition to the Rapid Analytical Screening of Milk Samples for Polychlorinated Biphenyls

Strategically designed sample composition (SSC) is a new technique that decreases the number of analytical determinations needed in routine screening to as few as the number of original sample specimens while providing information that is specific to them. Although this new technique has been applied to environmental studies, this paper describes its first application to food safety studies. Contamination of milk samples with polychlorinated biphenyls (PCBs) was chosen as a case study to show the usefulness and potential of the SSC technique with a fast analytical procedure that involves saponification of the samples and solid-phase microextraction of the PCBs. A total of 20 sample specimens can be analyzed in 11 determinations with excellent predictions of the positive samples and the concentration levels of the contaminants. The robustness of the strategy was investigated and demonstrated.

Rapid Determination of 2,3,7,8-Tetrachlorodibenzo-p-Dioxin in Water Samples by Using Solid-Phase Microextraction Followed by Gas Chromatography with Tandem Mass Spectrometry

A rapid and simple method of using solid-phase microextraction was developed for determination of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) in water samples. In this method, the target analyte is extracted from the sample into the polymeric coating of the fused-silica fiber. After exposure, the fiber is thermally desorbed in the heated injection port of the gas chromatograph, and a chromatographic analysis is performed by using low-resolution tandem mass spectrometry. Parameters that may affect the extension of the microextraction process, such as sampling mode, sample volume, temperature, agitation, and sampling time, were studied. Extraction efficiencies for 3 coating fibers were investigated: 100 μm poly(dimethylsiloxane) (PDMS), 65 μm PDMS-divinylbenzene, and 75 μm carboxen-PDMS. Linearity was evaluated (R = 0.999) for a 250-fold concentration range from the fg/mL to the pg/mL level. The 2,3,7,8-TCDD was detected at the fg/mL level when the headspace over the water sample was sampled for 60 min; the limit of detection obtained was better than that of Method 8280B of the U.S. Environmental Protection Agency. The proposed method performed well when applied to the analysis of tap water, lake water, and seawater samples.

Assessment of gas chromatography time-of-flight mass spectrometry for the screening of semi-volatile compounds in indoor dust

Indoor dust contains a complex mixture of anthropogenic and synthetic compounds closely related to dermal and respiratory diseases. Target methods have been developed for the quantification of distinct groups of substances in dust samples; however, the comprehensive characterization of the different species existing in this matrix remains a challenging issue. Herein, we assess the performance of gas chromatography (GC) time-of-flight mass spectrometry (TOF-MS), using electron ionization (EI), for the screening of compounds present in indoor dust. Samples are processed by pressurized-liquid extraction (PLE) before GC-EI-TOF-MS analysis. The study proposes a data mining workflow for the non-target identification of species contained in dust extracts, aided by preliminary comparison with nominal resolution EI-MS spectra in the NIST17 library. The possibilities, and the limitations, of the above approach are discussed and the identities of >75 compounds are confirmed by comparison with authentic standards in dust from indoor environments. Some species, such as indigo, phthalic anhydride, 2,4-toluene di-isocyanate, phthalimide, certain UV absorbers and octyl isothiazolinone, identified in this research, have not been previously considered in target methods dealing with dust analysis. The study also evaluates two different algorithms for the suspected-target screening of dust extracts using a customized library of accurate EI-MS spectra. Finally, a semi-quantitative estimation of the range of concentrations for a group of 44 pollutants in a set of 27 dust samples is provided.

Determination of 18 organophosphorus flame retardants/plasticizers in mussel samples by matrix solid-phase dispersion combined to liquid chromatography-tandem mass spectrometry

This study presents the development and validation of a new analytical method based on matrix solid-phase dispersion (MSPD), integrating sample extraction and clean-up in one single step, followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) for the simultaneous determination of 18 organophosphorus flame retardants and/or plasticizers (OPEs) in marine mussel (Mytilus edulis and Mytilus galloprovincialis) samples. Among these OPEs, 5 (tetraethyl 1,2-ethanediylbis(phosphonate), 6H-dibenzo[c,e] [1,2]oxaphosphinine 6-oxide, tris(2,3-dibromopropyl) phosphate, 2,2-propanediyldi-4,1-phenylene bis(phosphate) and resorcinol bis(diphenyl phosphate)) are considered here for the first time in marine samples. Different parameters affecting the MSPD (clean-up sorbent and elution solvent) were optimized to obtain a good compromise between analyte recoveries and extract clean-up. Also, particular attention was paid to tackle blank issues. The overall method was validated in terms of trueness, precision and detection and quantification limits. Percentages of recovery varied from 69% to 122% with relative standard deviations below 24%. Detection limits ranged from 0.06 to 5 ng g^-1 and quantification limits from 0.19 to 17 ng g^-1 dry weight. Finally, the method was applied to the analysis of 7 mussel samples collected in the coast of Galicia (Spain). 8 OPEs were detected in these samples at concentrations ranging from the LOQ to 291 ng g^-1 dry weight.

Legacy and emerging pollutants in marine bivalves from the Galician coast (NW Spain)

The presence of pollutants in estuary and oceanic systems is a global problem and a serious concern to human and environmental health. Usually, environmental monitoring studies consider classical persistent organic pollutants (POPs). However, the lists of POPs keep continuously growing and new POPs and other emerging pollutants should be considered in new monitoring programs. So, this study aimed to investigate the distribution and profile of classical POPs (polychlorinated biphenyl (PCBs), organochlorine pesticides (OCPs), and polycyclic aromatic hydrocarbons (PAHs)), new POPs and emerging pollutants (polybrominated diphenyl ethers (PBDEs), perfluorinated compounds (PFCs), novel halogenated flame retardants (NFRs) and UV filters) in bivalve mollusc samples (both raft-cultivated and wild mussel, Mytilus galloprovincialis; cockle, Cerestoderma edule; and clam, Ruditapes descussatus) collected in nine Galician Rias during the period February 2012 to February 2013. A predominance of PAHs (6.8-317 ng/g dry weight (dw)) followed by PCBs (0.47-261 ng/g dw), UV filters (1.4-157 ng/g dw), PFCs (0.53-62 ng/g dw), OCPs (0.07-29 ng/g dw), PBDEs (0.31-6.6 ng/g dw) and NFRs (0.07-3.2 ng/g dw) was found in the studied bivalves, being the UV filter octocrylene the compound found at the highest concentration (141 ng/g dw in a cockle sample), while the PAHs chrysene and benzo(b)fluoranthene were the compounds with the highest average concentration (20 and 14 ng/g dw, respectively). Inter-species, temporal and geographical variations on pollutants concentration were assessed by multifactorial analysis of variance. Statistically significant differences among the type of mollusc were observed for levels of organochlorinated and organobrominated pollutants considered (PCBs, OCPs and PBDEs), which were detected at higher concentrations in wild mussel. On the other hand, the main PFCs and UV filters showed a higher detection frequency in cockle samples. Location played significant role for PAHs, PCBs and the main PBDEs, being the most polluted rias those more industrialized and populated, i.e. A Coruña, Ferrol and/or Vigo. Finally, sampling timepoint was also a significant factor for most of the families considered but with different profiles. Thus, PAHs and PCBs showed higher concentrations in both February 2012 and 2013 and lower in August 2012, while the main PBDEs were measured at higher concentrations in November 2012 and lower in February 2012; and the main NFRs, PFCs and UV filters were present at lower levels in February 2013.

Direct analysis in real time accurate mass spectrometry determination of bisphenol A in thermal printing paper

Contact with thermal printing paper is a relevant source of dermal exposure to unbonded bisphenol A (BPA). In order to limit this exposure route, the European Union has introduced a drastic reduction in the maximum allowed concentration of BPA in thermal paper produced after beginning of year 2020. This study investigates the suitability of direct analysis in real time (DART), combined with accurate mass spectrometry, as a faster alternative to chromatography-based methods for the quantitative determination of BPA, and three analogues species, in receipts and tickets usually printed on thermal paper. The ionization efficiency of these compounds is evaluated under different conditions, and the effect of instrumental parameters of the DART source in the observed responses is discussed. The yield of the DART desorption-ionization process was greatly improved when compounds are previously converted into their acetyl derivatives; thereafter, the temperature of electronically excited helium atoms was the most relevant of the evaluated instrumental parameters. Under optimized conditions, the reported method provided recoveries in the range from 90 to 110%, a limit of quantification of 0.004% (w:w), well below the maximum concentration established after 2020 for BPA (0.02%, w:w), and permitted to perform duplicate determinations of each sample extract with a response time around 1 min. The accuracy of BPA levels found in non-spiked samples was confirmed using GC-EI-MS as reference technique. BPA was systematically noticed in the processed samples with concentrations ranging from 0.005% to more than 6%.

Selective determination of sartan drugs in environmental water samples by mixed-mode solid-phase extraction and liquid chromatography tandem mass spectrometry

Herein, a method for the simultaneous determination of the currently prescribed sartan drugs (eprosartan, EPR; olmesartan, OLM; losartan, LOS; candesartan, CAN; telmisartan, TEL; irbesartan, IRB; and valsartan, VAL), and the biodegradation product valsartan acid (VALA), in water samples (raw and treated wastewater, river and tap water) was developed. Solid-phase extraction (SPE) and ultra-performance liquid chromatography (UPLC) tandem mass spectrometry (MS/MS) were employed as concentration and determination techniques, respectively. Different sorbents and elution solvents were tested for sample preparation. Under optimized conditions, samples at neutral pH (6-8 units) were concentrated using mixed-mode (reversed-phase and anionic exchange) cartridges. Thereafter, the sorbent was washed with 5 mL of a methanol: water (1:1) solution, dried under a nitrogen stream and compounds were eluted with 2 mL of methanol: NH₃ (98:2). The accuracy of the method (accounting for SPE efficiency and matrix effects during electrospray ionization) was investigated using solvent-based calibration standards. Global recoveries, obtained for different water matrices (tap, river, treated and raw wastewater), ranged from 82% to 134%, with standard deviations between 2 and 18%. LOQs varied from 2 to 50 ng L^-1. Analysis of un-spiked samples confirmed: (1) the incomplete removal of sartans at sewage treatment plants (STPs), (2) the formation of VALA during municipal water treatment, and (3) the presence of VALA in the processed tap water samples. Additional findings of the current study are the detection of hydroxylated derivatives of the sartan drugs IRB and LOS in wastewater, and the E-Z isomerization of EPR in environmental water samples.

Profiling cocaine residues and pyrolytic products in wastewater by mixed-mode liquid chromatography-tandem mass spectrometry

This work provides a new analytical method for the determination of cocaine, its metabolites benzoylecgonine and cocaethylene, the pyrolytic products anhydroecgonine and anhydroecgonine methyl ester, and the pharmaceutical levamisole in wastewater. Samples were solid-phase extracted and extracts analyzed by liquid chromatography-tandem mass spectrometry using, for the first time in the illicit drug field, a stationary phase that combines reversed-phase and weak cation-exchange functionalities. The overall method performance was satisfactory, with limits of detection below 1 ng/L, relative standard deviations below 21%, and percentages of recovery between 93% and 121%. Analysis of 24-hour composite raw wastewater samples collected in Santiago de Compostela (Spain) and Brasilia (Brazil) highlighted benzoylecgonine as the compound showing the highest population-normalized mass loads (300-1000 mg/day/1000 inhabitants). In Brasilia, cocaine and levamisole loads underwent an upsurge on Sunday, indicating a high consumption, and likely a direct disposal, of cocaine powder on this day. Conversely, the pyrolytic product resulting from the smoke of crack, anhydroecgonine methyl ester, and its metabolite anhydroecgonine were relatively stable over the four days, agreeing with a non-recreational-associated use of crack.

Determination of Persistent and Mobile Organic Contaminants (PMOCs) in Water by Mixed-Mode Liquid Chromatography-Tandem Mass Spectrometry

The presence of persistent and mobile organic contaminants (PMOC) in aquatic environments has become a matter of concern due to their ability of breaking through natural and anthropogenic barriers, even reaching drinking water. The presence of many of these compounds in surface and drinking water has been reported in screening studies, but there is still a lack of analytical methods capable of quantifying them. Herein, we propose a method combining mixed-mode-solid-phase extraction (MM-SPE) as preconcentration technique and mixed-mode liquid chromatography (MMLC) coupled to tandem mass spectrometry as a determination technique for the quantitative determination of 23 target PMOCs in surface and drinking water samples. When compared to reversed-phase liquid chromatography, the MMLC protocol has proven to be superior in both retentive capabilities and peak shape for ionic compounds, while performing also well for neutrals. The overall method performance was satisfactory with limits of quantification under 50 ng L^-1 for most of analytes in both surface and drinking water. The relative standard deviation was lower than 20%, and the average recovery was 78 and 80% in surface and drinking water, respectively. The method was applied to 15 water samples collected in Spain, where 17 out of the 23 target PMOCs were quantified in at least one sample. Among them, 6 chemicals (e.g., benzyltrimethylammonium) are reported and/or quantified here for the first time.

Free chlorine reactions of angiotensin II receptor antagonists: Kinetics study, transformation products elucidation and in-silico ecotoxicity assessment

Angiotensin II receptor antagonists (ARA II) are widely employed in the treatment of hypertension-related diseases. Because of their partial metabolization and limited biodegradability, these drugs have become ubiquitous pollutants in the aquatic environment, including surface water. This research evaluated the reactivity of the ARA II drugs: irbesartan (IRB), losartan (LOS) telmisartan (TEL) and valsartan (VAL) with free chlorine. Responses of parent compounds and their transformation products (TPs) were followed by liquid chromatography (LC) with quadrupole (Q) time-of-flight (TOF) mass spectrometry. Degradation experiments were carried out using ultrapure and river water samples, adjusted at different pHs and, in some cases, adding a small amount (ng mL^-1 level) of bromide salts. Whilst TEL and VAL remained stable in presence of relatively high concentrations of free chlorine (10 mg L^-1), IRB and LOS were removed according to a pseudo-first order kinetics model. Considering an initial chlorine concentration of 10 mg L^-1, their half-lives varied between 6 and 734 min, depending mostly on the water pH. IRB reacted with free chlorine through hydroxylation processes, with and without molecular cleavage and re-arrangements in the imidazolone ring. Its TPs showed a lower in-silico predicted toxicity than the parent drug. In case of LOS, two major competitive degradation routes were identified. They involved replacement of the methanol group attached to the imidazole cycle by chlorine or bromine, and the cleavage of this cycle with removal of the chlorinated carbon and the nitrogen in alpha position. The TPs generated following the first route are predicted to be more toxic than LOS.

Photodegradation of nitenpyram under UV and solar radiation: Kinetics, transformation products identification and toxicity prediction

The photodegradation of the neonicotinoid insecticide nitenpyram (NPY) under UV and solar irradiation has been investigated in water solutions in order to assess its persistence in the environment and its transformation into other potentially more toxic species. Time-courses were followed by ultra-high performance liquid chromatography-tandem mass spectrometry. Transformation products (TPs) were identified by their accurate product ion spectra, obtained with a quadrupole time-of-flight mass spectrometer after their liquid chromatographic separation. NPY was rapidly photodegraded under all the investigated conditions, following a first-order model and with half-lives varying from seconds to <10 min. Quantum yields were between 0.0385 and 0.0534 mol einstein^-1. The identified TPs, some of them reported for the first time in this study, were formed through different reactions involving the nitro-ethylene moiety of the parent insecticide. Conversely to the lability of NPY, its TPs were more photo-stable in both ultrapure and river water. Moreover, in-silico toxicity assessment showed that most of them display a higher acute toxicity than NPY.

Fabric phase sorptive extraction followed by ultra-performance liquid chromatography-tandem mass spectrometry for the determination of fungicides and insecticides in wine

In this work, fabric phase sorptive extraction (FPSE) is investigated for the extraction and preconcentration of ultra-trace level residues of fungicides (19 compounds) and insecticides (3 species) in wine samples. Subsequently, the preconcentrated analytes are selectively determined using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Parameters affecting the efficiency and repeatability of the extraction are evaluated in depth; moreover, the proposed method is characterized in terms of linear response range, trueness, precision and limits of quantification (LOQs). The set-up of the extraction process and the type of coating were the variables exerting the most prominent effects in the repeatability and the yield of the extraction, respectively. Under optimized conditions, samples (10 mL of wine diluted with the same volume of ultrapure water) were extracted with a small amount of cellulose fabric (3 discs with 4 mm of diameter: total surface 0.38 cm²) coated with a sol-gel polyethylene glycol sorbent (sorbent amount 3.3 mg), immersed in the diluted sample, without being in direct contact with the PTFE covered magnetic stir bar. Following the overnight extraction step, analytes were quantitatively recovered using only 0.3 mL of an ACN-MeOH (80:20) mixture. Under equilibrium sampling conditions, the linear response range of the method varied from 0.2 to 200 ng mL^-1, with limits of quantification (LOQs) between 0.03 and 0.3 ng mL^-1. Relative recoveries ranged from 77 ± 6% to 118 ± 4%, and from 87 ± 4% to 121 ± 6% for red and white wines, respectively. Application of the optimized method to commercial wines demonstrated the existence of up to 9 out of 22 investigated compounds in the same wine sample. The compound identified at the highest concentration was iprovalicarb (IPR), with a value of 130 ± 9 ng mL^-1 in a commercial white wine.

Evaluation of the aqueous phototransformation routes of phenyl ethyl azolic fungicides by liquid chromatography accurate mass spectrometry

Similarities and differences among the phototransformation routes of four azolic fungicides (diniconazole, DIN, imazalil, IMA; penconazole, PEN; and propiconazole, PRO) in surface water aliquots are investigated. Selected compounds share a common chemical structure consisting on dichlorophenyl and azolic rings connected through an ethylene bridge, which is substituted with different functionalities. Liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS) was employed as analytical technique to follow the time-course of precursor fungicides and to detect and to identify their photo-transformation products (TPs). Under solar light, the substituents linked to the ethylene chain controlled the stability of the fungicides. Whilst PEN and PRO remained stable, DIN and IMA showed moderate reactivities, with half-lives (t_1/2) of 5.1 and 33.5h, respectively. When exposed to UV (254nm) radiation, all compounds were effectively degraded with t_1/2 in the range from seconds to a few minutes. Dechlorination followed by intramolecular cyclization, between phenyl and azolic rings, was identified as a common phototransformation route under UV irradiation. Depending on the length and the kind of the functionalities attached to the ethylene bridge, additional cyclization reactions are also possible. In-silico toxicity predictions pointed out to dechlorinated tricyclic TPs as the most concerning ones, with predicted lethal concentrations (LC₅₀) in the same range as the precursor fungicides.

Evaluation of nitrate effects in the aqueous photodegradability of selected phenolic pollutants

The effect of nitrate in the aqueous photodegradation of five phenolic environmental pollutants (ortho-phenylphenol, OPP; methyl paraben, MeP; propyl paraben, PrP; Triclosan, TCS and bisphenol A, BPA) is evaluated. Time-course of precursor compounds and formation of transformation products (TPs) were investigated by liquid chromatography quadrupole time-of-flight mass spectrometry (LC-QTOF-MS). Nitrate showed a positive effect in the removal of selected pollutants. Observed TPs resulted from hydroxylation, aromatic nitration (with or without molecule cleavage) and nitro dehalogenation processes. The above reactions involved the participation of ·OH and ·NO₂ radicals arising from photolysis of nitrate. Nitro TPs were produced in a different extent depending on the structure of the precursor pollutant, nitrate concentration, light source (254 nm UV and solar light) and water matrix (ultrapure, surface and urban wastewater). Some of these nitro TPs were also observed during UV irradiation of untreated and unbuffered wastewater, either naturally polluted with parent phenolic compounds or spiked with these species at the sub μg L^-1 level. Nitration reactions were particularly favourable for OPP with the generated nitro TPs displaying a higher stability than the precursor molecule and the hydroxylated TPs of the same compound.

Reaction of diazepam and related benzodiazepines with chlorine. Kinetics, transformation products and in-silico toxicological assessment

In this work, the reaction of four benzodiazepines (diazepam, oxazepam, nordazepam and temazepam) during water chlorination was studied by means of liquid chromatography-quadrupole-time of flight-mass spectrometry (LC-QTOF-MS). For those compounds that showed a significant degradation, i.e. diazepam, oxazepam and nordazepam, parameters affecting to the reaction kinetics (pH, chlorine and bromide level) were studied in detail and transformation products were tentatively identified. The oxidation reactions followed pseudofirst-order kinetics with rate constants in the range of 1.8-42.5 M^-1 s^-1, 0.13-1.16 M^-1 s^-1 and 0.04-20.4 M^-1 s^-1 corresponding to half-life values in the range of 1.9-146 min, 1.8-87 h and 2.5-637 h for oxazepam, nordazepam and diazepam, respectively, depending of the levels of studied parameters. Chlorine and pH affected significantly the reaction kinetics, where an increase of the pH resulted into a decrease of the reaction rate, whereas higher chlorine dosages led to faster kinetics, as expected in this case. The transformation of the studied benzodiazepines occurs mainly at the 1,4-diazepine 7-membered-ring, resulting in ring opening to form benzophenone derivatives or the formation of a 6-membered pyrimidine ring, leading to quinazoline derivatives. The formation of these by-products was also tested in real surface water samples observing kinetics of oxazepam degradation slower in river than in creek water, while the degradation of the two other benzodiazepines occurred only in the simpler sample (creek water). Finally, the acute and chronical toxicity and mutagenicity of precursors and transformation products were estimated using quantitative structure-activity relationship (QSAR) software tools: Ecological Structure Activity Relationships (ECOSAR) and Toxicity Estimation Software Tool (TEST), finding that some transformation products could be more toxic/mutagenic than the precursor drug, but additional test would be needed to confirm this fact.

Screening for Polar Chemicals in Water by Trifunctional Mixed-Mode Liquid Chromatography-High Resolution Mass Spectrometry

The presence of persistent and mobile organic contaminants (PMOC) in aquatic environments is a matter of high concern due to their capability of crossing through natural and anthropogenic barriers, even reaching drinking water. Most analytical methods rely on reversed-phase liquid chromatography (RPLC), which is quite limited for the detection of very polar chemicals. Thus, many of these PMOCs may have not been recognized as water pollutants yet, due to the lack of analytical methods capable to detect them. Mixed-mode LC (MMLC), providing the combination of RP and ion-exchange functionalities is explored in this work with a trifunctional column, combining RPLC, anion and cation exchange, which allows the simultaneous determination of analytes with extremely different properties. A nondiscriminant sample concentration step followed by a MMLC-high resolution mass spectrometry method was developed for a group of 37 very polar model chemicals with different acid/base functionalities. The overall method performance was satisfactory with a mean limit of detection of 50 ng/L, relative standard deviation lower than 20% and overall recoveries (including matrix effects) higher than 60% for 54% of model compounds. Then, the method was applied to 15 real water samples, by a suspect screening approach. For those detected PMOC with standard available, a preliminary estimation of concentrations was also performed. Thus, 22 compounds were unequivocally identified in a range of expected concentrations from 6 ng/L to 540 μg/L. Some of them are well-known PMOC, such as acesulfame, perfluorobutanoic acid or metformin, but other novel pollutants were also identified, as for example di-o-tolylguanidine or trifluoromethanesulfonic acid, which had not or were scarcely studied in water so far.

Wastewater-Based Epidemiology as a New Tool for Estimating Population Exposure to Phthalate Plasticizers

This study proposes the monitoring of phthalate metabolites in wastewater as a nonintrusive and economic alternative to urine analysis for estimating human exposure to phthalates. To this end, a solid-phase extraction-liquid chromatography-tandem mass spectrometry method was developed, allowing for the determination of eight phthalate metabolites in wastewater (limits of quantification between 0.5 and 32 ng L^-1). The analysis of samples from the NW region of Spain showed that these substances occur in raw wastewater up to ca. 1.6 μg L^-1 and in treated wastewater up to ca. 1 μg L^-1. Concentrations in raw wastewater were converted into levels of exposure to six phthalate diesters. For two of them, these levels were always below the daily exposure thresholds recommended by the U.S. Environmental Protection Agency and the European Food Safety Authority. For the other four, however, estimates of exposure surpassed such a threshold (especially the toddler threshold) in some cases, highlighting the significance of the exposure to phthalates in children. Finally, concentrations in wastewater were also used to estimate metabolite concentrations in urine, providing a reasonable concordance between our results and the data obtained in two previous biomonitoring studies.