Separation of steroid isomers by ion mobility mass spectrometry

Predicting ion mobility collision cross sections and assessing prediction variation by combining conventional and data driven modeling

The use of collision cross section (CCS) values derived from ion mobility studies is proving to be an increasingly important tool in the characterization and identification of molecules detected in complex mixtures. Here, a novel machine learning (ML) based method for predicting CCS integrating both molecular modeling (MM) and ML methodologies has been devised and shown to be able to accurately predict CCS values for singly charged small molecular weight molecules from a broad range of chemical classes. The model performed favorably compared to existing models, improving compound identifications for isobaric analytes in terms of ranking and assigning identification probability values to the annotation. Furthermore, charge localization was seen to be correlated with CCS prediction accuracy and with gas-phase proton affinity demonstrating the potential to provide a proxy for prediction error based on chemical structural properties. The presented approach and findings represent a further step towards accurate prediction and application of computationally generated CCS values.

Differentiation of steroid isomers by steroid analogues adducted trapped ion mobility spectrometry-mass spectrometry

Steroids are one of the important indicators of health and disease. However, due to the high similarity of steroid structures, there are several potential obstacles in the differentiation of steroids, especially for their isomers. Herein, we described a trapped ion mobility spectrometry-mass spectrometry (TIMS-MS) approach based on the steroid analogue adduction for isomer-specific identification of steroids. The application of dexamethasone (DEX) to form heterodimers with steroids enhanced the separation of their isomers in TIMS. Two isomer pairs including 17-hydroxyprogesterone/11-deoxycorticosterone and androsterone/epiandrosterone were successfully separated as the heterodimers with DEX by TIMS. The stability of DEX-adducted heterodimers is comparable with steroid dimers. Owing to the high separation efficiency and stability, the relative quantification of steroid isomers was demonstrated with the proposed method.

Application of Ion Mobility Spectrometry and the Derived Collision Cross Section in the Analysis of Environmental Organic Micropollutants

Ion mobility spectrometry (IMS) is a rapid gas-phase separation technique, which can distinguish ions on the basis of their size, shape, and charge. The IMS-derived collision cross section (CCS) can serve as additional identification evidence for the screening of environmental organic micropollutants (OMPs). In this work, we summarize the published experimental CCS values of environmental OMPs, introduce the current CCS prediction tools, summarize the use of IMS and CCS in the analysis of environmental OMPs, and finally discussed the benefits of IMS and CCS in environmental analysis. An up-to-date CCS compendium for environmental contaminants was produced by combining CCS databases and data sets of particular types of environmental OMPs, including pesticides, drugs, mycotoxins, steroids, plastic additives, per- and polyfluoroalkyl substances (PFAS), polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and polybrominated diphenyl ethers (PBDEs), as well as their well-known transformation products. A total of 9407 experimental CCS values from 4170 OMPs were retrieved from 23 publications, which contain both drift tube CCS in nitrogen (DTCCSN2) and traveling wave CCS in nitrogen (TWCCSN2). A selection of publicly accessible and in-house CCS prediction tools were also investigated; the chemical space covered by the training set and the quality of CCS measurements seem to be vital factors affecting the CCS prediction accuracy. Then, the applications of IMS and the derived CCS in the screening of various OMPs were summarized, and the benefits of IMS and CCS, including increased peak capacity, the elimination of interfering ions, the separation of isomers, and the reduction of false positives and false negatives, were discussed in detail. With the improvement of the resolving power of IMS and enhancements of experimental CCS databases, the practicability of IMS in the analysis of environmental OMPs will continue to improve.

Improving LC-MS/MS measurements of steroids with differential mobility spectrometry

Introduction

Steroid measurements are important for diagnosis and monitoring of many conditions and treatment regiments; however, due to structural and chemical similarities amongst steroids, these analyses are challenging, even for highly specific techniques such as liquid chromatography-tandem mass spectrometry (LC-MS/MS). Differential mobility spectrometry (DMS) has the potential to improve these analyses by providing an orthogonal and complementary separation technique.

Methods

Initially, the potential for DMS to improve signal-to-noise ratio (S/N) and reduce interference was tested by comparing chromatograms acquired with and without DMS when performing measurements of six different steroids. Subsequently, a full clinical validation of cortisol and cortisone in urine was performed with the LC-DMS-MS/MS method.

Results and Discussion

DMS significantly reduced interferences observed in the chromatograms and boosted S/N by between 1.6 and 13.8 times. Additionally, DMS improved the agreement between quantifier/qualifier fragment ion results for cortisol and cortisone as indicated by the increase in R2 from approximately 0.81 to 0.98. All validation studies met acceptance criteria and we observed exceptional analytical performance in terms of precision, with % CVs less than 8%.

Conclusions

DMS improved the specificity of the steroid measurements by reducing interferences and improving S/N. The validation studies prove that these benefits did not come at the expense of other aspects of analytical performance. This study indicates that DMS has the potential to benefit not just clinical measurements of challenging analytes, but many clinical LC-MS/MS analyses.

Improved analysis of derivatized steroid hormone isomers using ion mobility-mass spectrometry (IM-MS)

Over the last decade, applications of ion mobility-mass spectrometry (IM-MS) have exploded due primarily to the widespread commercialization of robust instrumentation from several vendors. Unfortunately, the modest resolving power of many of these platforms (~40-60) has precluded routine separation of constitutional and stereochemical isomers. While instrumentation advances have pushed resolving power to >150 in some cases, chemical approaches offer an alternative for increasing resolution with existing IM-MS instrumentation. Herein we explore the utility of two reactions, derivatization by Girard's reagents and 1,1-carbonyldiimidazole (CDI), for improving IM separation of steroid hormone isomers. These reactions are fast (≤30 min), simple (requiring only basic lab equipment/expertise), and low-cost. Notably, these reactions are structurally selective in that they target carbonyl and hydroxyl groups, respectively, which are found in all naturally occurring steroids. Many steroid hormone isomers differ only in the number, location, and/or stereochemistry of these functional groups, allowing these reactions to "amplify" subtle structural differences and improve IM resolution. Our results show that resolution was significantly improved amongst CDI-derivatized isomer groups of hydroxyprogesterone (two-peak resolution of Rpp = 1.10 between 21-OHP and 11B-OHP), deoxycortisone (Rpp = 1.47 between 11-DHC and 21-DOC), and desoximetasone (Rpp = 1.98 between desoximetasone and fluocortolone). Moreover, characteristic collision cross section (DTCCSN2) measurements can be used to increase confidence in the identification of these compounds in complex biological mixtures. To demonstrate the feasibility of analyzing the derivatized steroids in complex biological matrixes, the reactions were performed following steroid extraction from urine and yielded similar results. Additionally, we applied a software-based approach (high-resolution demultiplexing) that further improved the resolving power (>150). Overall, our results suggest that targeted derivatization reactions coupled with IM-MS can significantly improve the resolution of challenging isomer groups, allowing for more accurate and efficient analysis of complex mixtures.

Development of a Rapid, Targeted LC-IM-MS Method for Anabolic Steroids

Anabolic steroids are of high biological interest due to their involvement in human development and disease progression. Additionally, they are banned in sport due to their performance-enhancing characteristics. Analytical challenges associated with their measurement stem from structural heterogeneity, poor ionization efficiency, and low natural abundance. Their importance in a variety of clinically relevant assays has prompted the consideration of integrating ion mobility spectrometry (IMS) into existing LC-MS assays, due primarily to its speed and structure-based separation capability. Herein we have optimized a rapid (2 min) targeted LC-IM-MS method for the detection and quantification of 40 anabolic steroids and their metabolites. First, a steroid-specific calibrant mixture was developed to cover the full range of retention time, mobility, and accurate mass. Importantly, this use of this calibrant mixture provided robust and reproducible measurements based on collision cross section (CCS) with interday reproducibility of <0.5%. Furthermore, the combined separation power of LC coupled to IM provided comprehensive differentiation of isomers/isobars within 6 different isobaric groups. Multiplexed IM acquisition also provided improved limits of detection, which were well below 1 ng/mL in almost all compounds measured. This method was also capable of steroid profiling, providing quantitative ratios (e.g., testosterone/epitestosterone, androsterone/etiocholanolone, etc.). Lastly, phase II steroid metabolites were probed in lieu of hydrolysis to demonstrate the ability to separate those analytes and provide information beyond total steroid concentration. This method has tremendous potential for rapid analysis of steroid profiles in human urine spanning a variety of applications from developmental disorders to doping in sport.

Collision Cross Section Prediction Based on Machine Learning

Ion mobility-mass spectrometry (IM-MS) is a powerful separation technique providing an additional dimension of separation to support the enhanced separation and characterization of complex components from the tissue metabolome and medicinal herbs. The integration of machine learning (ML) with IM-MS can overcome the barrier to the lack of reference standards, promoting the creation of a large number of proprietary collision cross section (CCS) databases, which help to achieve the rapid, comprehensive, and accurate characterization of the contained chemical components. In this review, advances in CCS prediction using ML in the past 2 decades are summarized. The advantages of ion mobility-mass spectrometers and the commercially available ion mobility technologies with different principles (e.g., time dispersive, confinement and selective release, and space dispersive) are introduced and compared. The general procedures involved in CCS prediction based on ML (acquisition and optimization of the independent and dependent variables, model construction and evaluation, etc.) are highlighted. In addition, quantum chemistry, molecular dynamics, and CCS theoretical calculations are also described. Finally, the applications of CCS prediction in metabolomics, natural products, foods, and the other research fields are reflected.

Effects of structural characteristics of (un)conjugated steroid metabolites in their collision cross section value

In this work, the collision cross section (CCS) value of 103 steroids (including unconjugated metabolites and phase II metabolites conjugated with sulfate and glucuronide groups) was determined by liquid chromatography coupled to traveling wave ion mobility spectrometry (LC-TWIMS). A time of flight (QTOF) mass analyzer was used to perform the analytes determination at high-resolution mass spectrometry. An electrospray ionization source (ESI) was used to generate [M+H]⁺, [M + NH₄]⁺ and/or [M - H]^- ions. High reproducibility was observed for the CCS determination in both urine and standard solutions, obtaining RSD lower than 0.3% and 0.5% in all cases respectively. CCS determination in matrix was in accordance with the CCS measured in standards solution showing deviations below 2%. In general, CCS values were directly correlated with the ion mass and allowed differentiating between glucuronides, sulfates and free steroids although differences among steroids of the same group were less significant. However, more specific information was obtained for phase II metabolites observing differences in the CCS value of isomeric pairs concerning the conjugation position or the α/β configuration, which could be useful in the structural elucidation of new steroid metabolites in the anti-doping field. Finally, the potential of IMS reducing interferences from the sample matrix was also tested for the analysis of a glucuronide metabolite of bolasterone (5β-androstan-7α,17α-dimethyl-3α,17β-diol-3-glucuronide) in urine samples.

Integrating the potential of ion mobility spectrometry-mass spectrometry in the separation and structural characterisation of lipid isomers

It is increasingly evident that a more detailed molecular structure analysis of isomeric lipids is critical to better understand their roles in biological processes. The occurrence of isomeric interference complicates conventional tandem mass spectrometry (MS/MS)-based determination, necessitating the development of more specialised methodologies to separate lipid isomers. The present review examines and discusses recent lipidomic studies based on ion mobility spectrometry combined with mass spectrometry (IMS-MS). Selected examples of the separation and elucidation of structural and stereoisomers of lipids are described based on their ion mobility behaviour. These include fatty acyls, glycerolipids, glycerophospholipids, sphingolipids, and sterol lipids. Recent approaches for specific applications to improve isomeric lipid structural information using direct infusion, coupling imaging, or liquid chromatographic separation workflows prior to IMS-MS are also discussed, including: 1) strategies to improve ion mobility shifts; 2) advanced tandem MS methods based on activation of lipid ions with electrons or photons, or gas-phase ion-molecule reactions; and 3) the use of chemical derivatisation techniques for lipid characterisation.

Comprehensive Steroid Assay with Non-Targeted Analysis Using Liquid Chromatography Ion Mobility Mass Spectrometry

Aldosterone-producing adenomas (APAs) have different steroid profiles in serum, depending on the causative genetic mutation. Ion mobility is a separation technique for gas-phase ions based on their m/z values, shapes, and sizes. Human serum (100 µL) was purified by liquid-liquid extraction using tert-butyl methyl ether/ethyl acetate at 1/1 (v/v) and mixed with deuterium-labeled steroids as the internal standard. The separated supernatant was dried, re-dissolved in water containing 20% methanol, and injected into a liquid chromatography-ion mobility-mass spectrometer (LC/IM/MS). We established a highly sensitive assay system by separating 20 steroids based on their retention time, m/z value, and drift time. Twenty steroids were measured in the serum of patients with primary aldosteronism, essential hypertension, and healthy subjects and were clearly classified using principal component analysis. This method was also able to detect phosphatidylcholine and phosphatidylethanolamine, which were not targeted. LC/IM/MS has a high selectivity for known compounds and has the potential to provide information on unknown compounds. This analytical method has the potential to elucidate the pathogenesis of APA and identify unknown steroids that could serve as biomarkers for APA with different genetic mutations.

Ion mobility-mass spectrometry to extend analytical performance in the determination of ergot alkaloids in cereal samples

This work evaluates the potential of ion mobility spectrometry (IMS) to improve the analytical performance of current liquid chromatography-mass spectrometry (LC-MS) workflows applied to the determination of ergot alkaloids (EAs) in cereal samples. Collision cross section (CCS) values for EA epimers are reported for the first time to contribute to their unambiguous identification. Additionally, CCS values have been inter-laboratory cross-validated and compared with CCS values predicted by machine-learning models. Slight differences were observed in terms of CCS values for ergotamine, ergosine and ergocristine and their corresponding epimers (from 3.3 to 4%), being sufficient to achieve a satisfactory peak-to-peak resolution for their unequivocal identification. A LC-travelling wave ion mobility (TWIM)-MS method has been developed for the analysis of EAs in barley and wheat samples. Signal-to-noise ratio (S/N) was improved between 2.5 and 4-fold compared to the analog LC-TOF-MS method. The quality of the extracted ion chromatograms was also improved by using IMS.

Improved Ion Mobility Separation and Structural Characterization of Steroids using Derivatization Methods

Steroids are an important class of biomolecules studied for their role in metabolism, development, nutrition, and disease. Although highly sensitive GC- and LC-MS/MS-based methods have been developed for targeted quantitation of known steroid metabolites, emerging techniques including ion mobility (IM) have shown promise in improved analysis and capacity to better identify unknowns in complex biological samples. Herein, we couple LC-IM-MS/MS with structurally selective reactions targeting hydroxyl and carbonyl functional groups to improve IM resolution and structural elucidation. We demonstrate that 1,1-carbonyldiimidazole derivatization of hydroxyl stereoisomer pairs such as testosterone/epitestosterone and androsterone/epiandrosterone results in increased IM resolution with ΔCCS > 15%. Additionally, performing this in parallel with derivatization of the carbonyl group by Girard's Reagent P resulted in unique products based on relative differences in number of each functional group and C17 alkylation. These changes could be easily deciphered using the combination of retention time, collision cross section, accurate mass, and MS/MS fragmentation pattern. Derivatization by Girard's Reagent P, which contains a fixed charge quaternary amine, also increased the ionization efficiency and could be explored for its potential benefit to sensitivity. Overall, the combination of these simple and easy derivatization reactions with LC-IM-MS/MS analysis provides a method for improved analysis of known target analytes while also yielding critical structural information that can be used for identification of potential unknowns.

Ion mobility mass spectrometry in the omics era: Challenges and opportunities for metabolomics and lipidomics

Researchers worldwide are taking advantage of novel, commercially available, technologies, such as ion mobility mass spectrometry (IM-MS), for metabolomics and lipidomics applications in a variety of fields including life, biomedical, and food sciences. IM-MS provides three main technical advantages over traditional LC-MS workflows. Firstly, in addition to mass, IM-MS allows collision cross-section values to be measured for metabolites and lipids, a physicochemical identifier related to the chemical shape of an analyte that increases the confidence of identification. Second, IM-MS increases peak capacity and the signal-to-noise, improving fingerprinting as well as quantification, and better defining the spatial localization of metabolites and lipids in biological and food samples. Third, IM-MS can be coupled with various fragmentation modes, adding new tools to improve structural characterization and molecular annotation. Here, we review the state-of-the-art in IM-MS technologies and approaches utilized to support metabolomics and lipidomics applications and we assess the challenges and opportunities in this growing field.

Different ion mobility-mass spectrometry coupling techniques to promote metabolomics

Metabolomics has become increasingly popular in recent years for many applications ranging from clinical diagnosis, human health to biotechnological questioning. Despite technological advances, metabolomic studies are still currently limited by the difficulty of identifying all metabolites, a class of compounds with great chemical diversity. Although lengthy chromatographic analyses are often used to obtain comprehensive data, many isobar and isomer metabolites still remain unresolved, which is a critical point for the compound identification. Currently, ion mobility spectrometry is being explored in metabolomics as a way to improve metabolome coverage, analysis throughput and isomer separation. In this review, all the steps of a typical workflow for untargeted metabolomics are discussed considering the use of an ion mobility instrument. An overview of metabolomics is first presented followed by a brief description of ion mobility instrumentation. The ion mobility potential for complex mixture analysis is discussed regarding its coupling with a mass spectrometer alone, providing gas-phase separation before mass analysis as well as its combination with different separation platforms (conventional hyphenation but also multidimensional ion mobility couplings), offering multidimensional separation. Various instrumental and analytical conditions for improving the ion mobility separation are also described. Finally, data mining, including software packages and visualization approaches, as well as the construction of ion mobility databases for the metabolite identification are examined.

Ion Mobility-Derived Collision Cross-Sections Add Extra Capability in Distinguishing Isomers and Compounds with Similar Retention Times: The Case of Aphidicolanes

The hyphenation of ion mobility spectrometry with high-resolution mass spectrometry has been widely used in the characterization of various metabolites. Nevertheless, such a powerful tool remains largely unexplored in natural products research, possibly mainly due to the lack of available compounds. To evaluate the ability of collision cross-sections (CCSs) in characterizing compounds, especially isomeric natural products, here we measured and compared the traveling-wave IMS-derived nitrogen CCS values for 75 marine-derived aphidicolanes. We established a CCS database for these compounds which contained 227 CCS values of different adducts. When comparing the CCS differences, 36 of 57 pairs (over 60%) of chromatographically neighboring compounds showed a ΔCCS over 2%. What is more, 64 of 104 isomeric pairs (over 60%) of aphidicolanes can be distinguished by their CCS values, and 13 of 18 pairs (over 70%) of chromatographically indistinguishable isomers can be differentiated from the mobility dimension. Our results strongly supported CCS as an important parameter with good orthogonality and complementarity with retention time. CCS is expected to play an important role in distinguishing complex and diverse marine natural products.

Recent developments in data acquisition, treatment and analysis with ion mobility-mass spectrometry for lipidomics

Lipids are involved in many biological processes and their study is constantly increasing. To identify a lipid among thousand requires of reliable methods and techniques. Ion Mobility (IM) can be coupled with Mass Spectrometry (MS) to increase analytical selectivity in lipid analysis of lipids. IM-MS has experienced an enormous development in several aspects, including instrumentation, sensitivity, amount of information collected and lipid identification capabilities. This review summarizes the latest developments in IM-MS analyses for lipidomics and focusses on the current acquisition modes in IM-MS, the approaches for the pre-treatment of the acquired data and the subsequent data analysis. Methods and tools for the calculation of Collision Cross Section (CCS) values of analytes are also reviewed. CCS values are commonly studied to support the identification of lipids, providing a quasi-orthogonal property that increases the confidence level in the annotation of compounds and can be matched in CCS databases. The information contained in this review might be of help to new users of IM-MS to decide the adequate instrumentation and software to perform IM-MS experiments for lipid analyses, but also for other experienced researchers that can reconsider their routines and protocols. This article is protected by copyright. All rights reserved.

“Targeted Glucocorticoid Analysis using Ion Mobility-Mass Spectrometry (IM-MS)”

•

Liquid chromatography-ion mobility-mass spectrometry (LC-IM-MS) for glucocorticoids.

•

Determination of collision cross sections (CCS) for isomers.

•

Different cation adducts shifted mobility and improved IM separation.

•

Changing drift gas (He, Ar, CO₂) shifted mobility and improved resolution.

Introduction

Ion mobility-mass spectrometry (IM-MS) is an emerging technique in the -omics fields that has broad potential applicability to the clinical lab. As a rapid, gas-phase structure-based separation technique, IM-MS offers promise in isomer separations and can be easily combined with existing LC-MS methods (i.e., LC-IM-MS). Several experimental conditions, including analyte cation adducts and drift composition further provide a means to tune separations for global and/or targeted applications.

Objectives

The primary objective of this study was to demonstrate the utility of IM-MS under a range of experimental conditions for detection of glucocorticoids, and specifically for the separation of several isomeric pairs.

Methods

LC-IM-MS was used to characterize 16 glucocorticoids including three isomer pairs: cortisone/prednisolone, betamethasone/dexamethasone, and flunisolide/triamcinolone acetonide. Collision cross section (CCS) values were measured for all common adducts (e.g., protonated and sodiated) using both step-field and single-field methods. Alternative alkali, alkaline earth, and transition metals were introduced, such that their adducts could also be measured. Finally, four different drift gases (helium, nitrogen, argon, and carbon dioxide) were compared for their relative separation capability.

Results

LC-IM-MS offered a robust, multidimensional separation technique that allowed for the 16 glucocorticoids to be analyzed and separated in three-dimensions (retention time, CCS, and m/z). Despite the relatively modest resolution of isomer pairs under standard conditions (i.e., nitrogen drift gas, sodiated ions, etc.), improvements were observed for alkaline earth and transition metals (notable barium adducts) and in carbon dioxide drift gas.

Conclusion

In summary, LC-IM-MS offers potential as a clinical method due to its ease of coupling with traditional LC-MS methods and its promise for tuning separations to better resolve targeted and/or global isomers in complex biological samples.

A tandem liquid chromatography and tandem mass spectrometry (LC/LC-MS/MS) technique to separate and quantify steroid isomers 11β-methyl-19-nortestosterone and testosterone

Liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) has become a mainstay analytical technique in pharmaceutical research and development and clinical diagnosis due to several advantages including excellent selectivity, specificity, and high sensitivity. LC-MS/MS has become the method of choice for steroids analysis due to its fast analytical time and improved specificity yet has a challenge in the separation and measurement of isomers with the same product ions. Here we describe a high-sensitivity LC/LC-MS/MS method that combines chiral chromatography and reverse-phase chromatography (LC/LC) along with MS/MS to rapidly separate and quantify steroid isomers of 11ß-methyl-19-nortestosterone (11ß-MNT) and endogenous testosterone in serum.

Toward Routine Analysis of Anabolic Androgenic Steroids in Urine Using Ion Mobility-Mass Spectrometry

Anabolic androgenic steroids (AAS) make up one of the most prevalent classes of performance-enhancing drugs banned by the World Anti-Doping Agency (WADA) due to the competitive advantage they can afford athletes. Mass spectrometry-based methods coupled with chromatographic separations have become the gold standard for AAS analysis because of the superior sensitivity and selectivity provided. However, emerging analytical techniques including ion mobility spectrometry (IMS) have been demonstrated in recent applications as a means to further characterize and identify potential unknowns while simultaneously delivering improved sensitivity by filtering noise. Herein we outline the next crucial steps in bringing IMS to the routine drug testing workflow by combining it with established chromatographic and mass spectrometry methods (i.e., LC-IM-MS) for the detection of AAS in human urine. In addition to robust measurement of collision cross sections which can be used for identification purposes, functional group microtrends provide a structural basis on which to elucidate the structure of future novel anabolic agents. Lastly, the developed workflow is tested by analysis of testosterone in a realistic matrix (human urine) and demonstrates a limit of detection of 524 pg/mL, which surpasses the WADA Minimum Required Performance Levels for anabolic steroids. This work is expected to pave the way toward routine incorporation of IMS into analytical drug testing workflows to augment both qualitative and quantitative measure of performance enhancing drugs in the future.

Lipid analysis by ion mobility spectrometry combined with mass spectrometry: A brief update with a perspective on applications in the clinical laboratory

Ion mobility spectrometry (IMS) is an analytical technique where ions are separated in the gas phase based on their mobility through a buffer gas in the presence of an electric field. An ion passing through an IMS device has a characteristic collisional cross section (CCS) value that depends on the buffer gas used. IMS can be coupled with mass spectrometry (MS), which characterizes an ion based on a mass-to-charge ratio (m/z), to increase analytical specificity and provide further physicochemical information. In particular, IMS-MS is of ever-increasing interest for the analysis of lipids, which can be problematic to accurately identify and quantify in bodily fluids by liquid chromatography (LC) with MS alone due to the presence of isomers, isobars, and structurally similar analogs. IMS provides an additional layer of separation when combined with front-end LC approaches, thereby, enhancing peak capacity and analytical specificity. CCS (and also ion mobility drift time) can be plotted against m/z ion intensity and/or LC retention time in order to generate in-depth molecular profiles of a sample. Utilization of IMS-MS for routine clinical laboratory testing remains relatively unexplored, but areas do exist for potential implementation. A brief update is provided here on lipid analysis using IMS-MS with a perspective on some applications in the clinical laboratory.

Plants Metabolome Study: Emerging Tools and Techniques

Metabolomics is now considered a wide-ranging, sensitive and practical approach to acquire useful information on the composition of a metabolite pool present in any organism, including plants. Investigating metabolomic regulation in plants is essential to understand their adaptation, acclimation and defense responses to environmental stresses through the production of numerous metabolites. Moreover, metabolomics can be easily applied for the phenotyping of plants; and thus, it has great potential to be used in genome editing programs to develop superior next-generation crops. This review describes the recent analytical tools and techniques available to study plants metabolome, along with their significance of sample preparation using targeted and non-targeted methods. Advanced analytical tools, like gas chromatography-mass spectrometry (GC-MS), liquid chromatography mass-spectroscopy (LC-MS), capillary electrophoresis-mass spectrometry (CE-MS), fourier transform ion cyclotron resonance-mass spectrometry (FTICR-MS) matrix-assisted laser desorption/ionization (MALDI), ion mobility spectrometry (IMS) and nuclear magnetic resonance (NMR) have speed up precise metabolic profiling in plants. Further, we provide a complete overview of bioinformatics tools and plant metabolome database that can be utilized to advance our knowledge to plant biology.

Investigations into pesticide charge site isomers using conventional IM and cIM systems

A growing number of pesticides are being used around the world necessitating strict regulatory policies to guarantee consumer safety. Liquid Chromatography - Mass Spectrometry (LC-MS) is a highly sensitive method for pesticide screening, which provides retention time, mass/charge ratios and the relative abundances of characteristic product ions. Variability in the latter necessitates relatively large tolerances (±30%, SANCO/12682/2019, current EU regulation). One cause of this variability may stem from the presence of different charge-site isomers (charge carrier being a proton, sodium cation, potassium cation and alike); each yielding a set of different product ions, of which the relative ratios are influenced by solution and ion source conditions. Consequently, varying relative abundances may be observed for analyte ions produced from calibration standards, chemical residues in food matrices and across different instruments. Ion Mobility Spectrometry (IMS) is a fast, gas phase separation technique which can resolve charge-site isomers based on differences in their collisional cross sections (CCSs). We previously used the IM device embedded in LC-IM-MS geometry to generate a pesticide CCS database and subsequently focussed upon identification of pesticides which form charge-site isomers. Latterly, we applied this approach to screen food commodities for pesticide residues. In some instances, isomer separation was clear, however sometimes broad, unresolved distributions were observed. Using a high-resolution cyclic IM device (cIM) we resolved and determined CCS values of species of indoxacarb, spinosad, fenpyroximate, epoxiconazole, metaflumizone and avermectin. Furthermore, utilising novel cIM functionalities (tandem-IM) we discovered that two spinosyn sodimers can interconvert in the gas phase.

Application of Predicted Collisional Cross Section to Metabolome Databases to Probabilistically Describe the Current and Future Ion Mobility Mass Spectrometry

Metabolomics is a powerful phenotyping platform with potential for high-throughput analyses. The primary technology for metabolite profiling is mass spectrometry. In recent years, the coupling of mass spectrometry with ion mobility spectrometry (IMS) has offered the promise of faster analysis time and greater resolving power. Our understanding of the potential impact of IMS on the field of metabolomics is limited by availability of comprehensive experimental data. In this analysis, we use a probabilistic approach to enumerate the strengths and limitations, the present and future, of this technology. This is accomplished through use of "model" metabolomes, predicted physicochemical properties, and probabilistic descriptions of resolving power. This analysis advances our understanding of the importance of orthogonality in resolving (separation) dimensions, describes the impact of the metabolome composition on resolution demands, and offers a system resolution landscape that may serve to guide practitioners in the coming years.

An emerging powerful technique for distinguishing isomers: Trapped ion mobility spectrometry time-of-flight mass spectrometry for rapid characterization of estrogen isomers

RATIONALE

Isomer metabolites are involved in metabolic pathways, and their characterization is essential but remains challenging even using high-performance analytical platforms. The addition of ion mobility prior to mass analysis can help to separate isomers. Here, the ability of a recently developed trapped ion mobility spectrometry system to separate metabolite isomers was examined.

METHODS

Three pairs of estrogen isomers were studied as a model of isomeric metabolites under both negative and positive electrospray ionization (ESI) modes using a commercial trapped ion mobility spectrometry-TOF mass spectrometer. The standard metabolites were also spiked into human urine to evaluate the efficiency of trapped ion mobility spectrometry to separate isomers in complex mixtures.

RESULTS

The estradiol glucuronide isomers (E₂ β-3G and E₂ β-17G) could be distinguished as deprotonated species, while the estradiol epimers (E₂ β and E₂ α) and the methoxyestradiol isomers (2-MeO-E₂ β and 4-MeO-E₂ β) were separated as lithiated adducts in positive ionization mode. When performing analyses in the urine matrix, no alteration in the ion mobility resolving power was observed and the measured collision cross section (CCS) values varied by less than 1.0%.

CONCLUSIONS

The trapped ion mobility spectrometry-TOF mass spectrometer enabled the separation of the metabolite isomers with very small differences in CCS values (ΔCCS% = 2%). It is shown to be an effective tool for the rapid characterization of isomers in complex matrices.

Integrating ion mobility and imaging mass spectrometry for comprehensive analysis of biological tissues: A brief review and perspective

Imaging mass spectrometry (IMS) technologies are capable of mapping a wide array of biomolecules in diverse cellular and tissue environments. IMS has emerged as an essential tool for providing spatially targeted molecular information due to its high sensitivity, wide molecular coverage, and chemical specificity. One of the major challenges for mapping the complex cellular milieu is the presence of many isomers and isobars in these samples. This challenge is traditionally addressed using orthogonal liquid chromatography (LC)-based analysis, though, common approaches such as chromatography and electrophoresis are not able to be performed at timescales that are compatible with most imaging applications. Ion mobility offers rapid, gas-phase separations that are readily integrated with IMS workflows in order to provide additional data dimensionality that can improve signal-to-noise, dynamic range, and specificity. Here, we highlight recent examples of ion mobility coupled to IMS and highlight their importance to the field.

Improved Identification of Isomeric Steroids Using the Paternò-Büchi Reaction with Ion Mobility-Mass Spectrometry

The Paternò-Büchi (PB) reaction is a common organic reaction in which a carbonyl radical formed by exposure to UV radiation reacts with an alkene to form an oxetane ring. Recent analytical applications of this reaction have included the determination of C═C bond position in lipid fatty acyl tails using tandem mass spectrometry. Our group has recently investigated methods for structurally modifying steroid isomers to improve their identification and resolution using ion mobility spectrometry. Herein, we report the first application of the Paternò-Büchi reaction to form steroid oxetanes using a simple, low-cost, and high efficiency method with a low pressure mercury lamp. This methodology is performed on several endogenous steroid isomers, resulting in unique ion mobility spectra that provide a unique fingerprint for each. These fingerprint spectra can add confidence in identification of those compounds, especially in complex biological matrixes. Testosterone and epitestosterone, an epimer pair commonly interrogated in a number of applications such as for their use as performance enhancing drugs, displayed one and three unique ion mobility peaks, respectively. These spectra and their measured collision cross sections (CCS) allow for unambiguous differentiation of these and several other steroid isomer groups analyzed in this work. Finally, multiple anabolic androgenic steroids prohibited by the World Anti-Doping Agency were tested with this method and resulted in unique CCS for their PB reaction products. This approach can offer improved confidence in their identification as well as for many other banned substances.

Separation of Structurally Similar Anabolic Steroids as Cation Adducts in FAIMS-MS

Novel synthetic anabolic androgenic steroids have been developed not only to dodge current antidoping tests at the professional sports level, but also for consumption by noncompetitive bodybuilders. These novel anabolic steroids are commonly referred to as "designer steroids" and pose a significant risk to users because of the lack of testing for toxicity and safety in animals or humans. Manufacturers of designer steroids dodge regulation by distributing them as nutritional or dietary supplements. Improving the throughput and accuracy of screening tests would help regulators to stay on top of illicit anabolic steroids. High-field asymmetric-waveform ion mobility spectrometry (FAIMS) utilizes an alternating asymmetric electric field to separate ions by their different mobilities at high- and low-fields as they travel through the separation space. When coupled to mass spectrometry (MS), FAIMS enhances the separation of analytes from other interfering compounds with little to no increase in analysis time. Here we investigate the effects of adding various cation species to sample solutions for the separation of structurally similar or isomeric anabolic androgenic steroids. FAIMS-MS spectra for these cation-modified samples show an increased number of compensation field (CF) peaks, some of which are confirmed to be unique for one steroid isomer over another. The CF peaks observed upon addition of cation species correspond to both monomer steroid-cation adduct ions and larger multimer ion complexes. Notably, the number of CF peaks and their CF shifts do not appear to have a straightforward relationship with cation size or electronegativity. Future directions aim at investigating the structures for these analyte-cation adduct ions for building a predictive model for their FAIMS separations.

Ozone-Induced Cleavage of Endocyclic C═C Double Bonds within Steroid Epimers Produces Unique Gas-Phase Conformations

Herein we demonstrate the first application of ozone-induced cleavage of endocyclic C═C double bonds for improved steroid isomer separation using ion mobility-mass spectrometry. Steroids represent a challenging biomolecular class for ion mobility (IM) separations due to their structural rigidity and subtle stereochemical differences. In this work, we compare the effects of ozonolysis on the relative mobilities of a model stereoisomer pair, testosterone and epitestosterone. A solution-phase ozonolysis approach is used due to its simplicity, relatively low cost, and potential for rapid, online analysis. Despite the presence of solvent-based addition products, we observe that these steroids undergo an ozone-based cleavage resulting in unique, stable gas-phase conformations. The resulting resolution between testosterone and epitestosterone, with collision cross section values of 176.6 and 193.3 Ų, respectively, demonstrates a significant improvement in comparison with previous IM-based approaches. The significantly smaller conformation observed for epitestosterone is stabilized by a three-point interaction between the oxygen-containing functional groups and a sodium ion; this same conformation cannot be sterically achieved by testosterone. Identification of this specific structural difference is strengthened by experimental results showing the disappearance of this conformation following in-source water loss, which eliminates the potential for that three-point interaction. Computational modeling of the lowest energy gas-phase structures for these ozone products corroborates the experimental results. In conclusion, this approach provides tremendous potential as a rapid IM separation method for steroid isomers and other endocyclic C═C double bond containing molecules.

Steroid analysis by ion mobility spectrometry

Steroids are an important biomolecule class for analysis due to their promise as biomarkers for various diseases and their abuse as performance enhancers in sports. Current analytical methods, including chromatography and nuclear magnetic resonance spectroscopy, fall short of being able to confidently analyze steroids, partly due to the large number of steroid isomers. Ion mobility spectrometry (IMS), a gas-phase ion separator, has shown potential for steroid analysis both in conjunction with liquid chromatography (LC) and as a stand-alone technique. This review will examine the current literature on IMS analysis of steroids. Analysis by LC-IMS will include examination of steroids and steroid glucuronides in human urine and serum samples for enhanced signal-to-noise ratios and higher confidence of identification. The stand-alone IMS analysis will examine the use of derivatization of steroids and formation of multimers to enhance resolution for steroid isomers analysis, where both methods have been shown to greatly increase the separation of steroid isomer species. However, these methods have not been applied to biological mixtures to assess their applicability to medical and forensic applications, which should be a future direction of this field.

Imaging Isomers on a Biological Surface: A Review

Mass spectrometry imaging is an imaging technology that allows the localization and identification of molecules on (biological) sample surfaces. Obtaining the localization of a compound in tissue is of great value in biological research. Yet, the identification of compounds remains a challenge. Mass spectrometry alone, even with high-mass resolution, cannot always distinguish between the subtle structural differences of isomeric compounds. This review discusses recent advances in mass spectrometry imaging of lipids, steroid hormones, amino acids and proteins that allow imaging with isomeric resolution. These improvements in detailed identification can give new insights into the local biological activity of isomers.

Liquid chromatography-ion mobility spectrometry-mass spectrometry analysis of multiple classes of steroid hormone isomers in a mixture

Methods for the analysis of steroids have long been of interest due to the multiple uses for such methods in medical applications, sports monitoring, and environmental science. The analysis of steroids involves inherent analytical hurdles due to their low biological concentrations, poor ionization efficiencies, and frequent occurrence of isomerism. One analytical technique that has been recently applied to steroid analysis is ion mobility spectrometry (IMS). While previous work has focused on the use of metal adduction and multimer formation to enhance separation through IMS analysis coupled to mass spectrometry (MS), this work furthers this approach by coupling IMS-MS with liquid chromatography (LC). Three different LC methods with varying tradeoffs between chromatographic resolution and run time were developed, with one of these achieving a resolution above 1.5 for all steroid isomers. These results also indicate that the coupling of LC to IMS-MS can increase the overall resolution of steroid isomers relative to what can be achieved by either LC or IMS alone. Furthermore, the use of LC and IMS in concert can allow for a more rapid analysis of steroid isomers than can be achieved by LC-MS alone. Finally, the IMS dimension provided for measurements of ion-neutral collision cross sections (CCSs), which were found to be in good agreement with previously reported measurements. Thus, this approach provides three complementary quantitative parameters (retention time, CCS, and mass-to-charge ratio) that can contribute the identification of analytes. Overall, the work presented here demonstrates the potential of coupling LC, IMS, and MS for the analysis of isomeric steroid hormones.

Application of probe electrospray ionization-tandem mass spectrometry to ultra-rapid determination of glufosinate and glyphosate in human serum

Glufosinate and glyphosate, which are non-selective herbicides that include an amino acid moiety in their structures, are frequently used worldwide to control unwanted vegetation. Unfortunately, these readily available herbicides are also used by people to commit suicide, and thus represent important chemicals of interest in the fields of clinical medicine and forensics. Because of the high water solubility of these herbicides, most analytical methods for their detection require a derivatization step, which results in longer analysis times. Therefore, derivatization-based methods do not currently contribute to judgements on treatment decisions in emergency medicine. In this study, we addressed this limiting factor by developing an ultra-rapid and simple analytical technique using a combination of probe electrospray ionization (PESI) and tandem mass spectrometry (MS/MS), which gives quantitative results within 0.3 min. Herbicide standards were added to human serum that was then subjected to analysis (N = 5 per concentration). The analysis was repeated daily over eight consecutive days. The limit of detection (LOD) was 0.59 μg/mL for glufosinate and 0.20 μg/mL for glyphosate. The limit of quantitation (LOQ), i.e., the lowest point on the calibration curves, was 1.56 μg/mL for both the herbicides. The matrix effects were observed at three different concentrations (between 95.7%-104% for glufosinate, and between 90.7%-95.7% for glyphosate). When applied to samples taken from actual poisoning cases (six samples for each herbicide), the present method gave almost the same quantitative values as those obtained by conventional high-performance liquid chromatography with fluorescence detection. Thus, we believe that PESI-MS/MS could emerge as a rapid diagnosis method in the clinical emergency field.

Current strategies for quantification of estrogens in clinical research

Estrogens and their bioactive metabolites play key roles in regulating diverse processes in health and disease. In particular, estrogens and estrogenic metabolites have shown both protective and non-protective effects on disease pathobiology, implicating the importance of this steroid pathway in disease diagnostics and monitoring. All estrogens circulate in a wide range of concentrations, which in some patient cohorts can be extremely low. However, elevated levels of estradiol are reported in disease. For example, in pulmonary arterial hypertension (PAH) elevated levels have been reported in men and postmenopausal women. Conventional immunoassay techniques have come under scrutiny, with their selectivity, accuracy and precision coming into question. Analytical methodologies such as gas and liquid chromatography coupled to single and tandem mass spectrometric approaches (GC-MS, GC-MS/MS, LC-MS and LC-MS/MS) have been developed to quantify endogenous estrogens and in some cases their bioactive metabolites in biological fluids such as urine, serum, plasma and saliva. Liquid-liquid or solid-phase extraction approaches are favoured with derivatization remaining a necessity for detection in lower volumes of sample. The limits of quantitation of individual assays vary but are commonly in the range of 0.5-5 pg/mL for estrone and estradiol, with limits for their bioactive metabolites being higher. This review provides an overview of current approaches for measurement of unconjugated estrogens in biological matrices by MS, highlighting the advances in this field and the challenges remaining for routine use in the clinical and research environment.

Investigations into the performance of travelling wave enabled conventional and cyclic ion mobility systems to characterise protomers of fluoroquinolone antibiotic residues

RATIONALE

Fluoroquinolones (FLQs) have been shown to form protomers with distinctive fragment profiles. Experimental parameters affect protomer formation, impacting observed conventional tandem mass spectrometric (MS/MS) dissociation and multiple reaction monitoring (MRM) transition reproducibility. Collision cross section (CCS) measurement can provide an additional identification metric and improved ion mobility (IM) separation strategies could provide further understanding of fluctuations in fragmentation when using electrospray ionisation (ESI).

METHODS

Porcine muscle tissue was fortified with nine fluoroquinolone antibiotics. Extracts were cleaned using QuEChERS dispersive extraction. Separation was achieved via ultra-high-performance liquid chromatography (UHPLC) and analysis performed using positive ion ESI coupled with linear T-wave IM (N₂ and CO₂ drift gas) and cyclic IM-MS (calibrated to perform accurate mass and CCS measurement).

RESULTS

IM-resolved protomeric species have been observed for nine FLQs (uniquely three for danofloxacin). Long-term reproducibility and cross-platform T-wave/cIM studies have demonstrated CCS metric errors <1.5% when compared with a FLQ protomer reference CCS library. When comparing FLQ protomer separation using a standard, linear T-wave IM separator (N₂ /CO₂ ) and using a high-resolution cyclic T-wave device (N₂ ), protomer peak-to-peak resolution ranged between Rs = 1 to Rs = 6 for the IM strategies utilised.

CONCLUSIONS

CCS is a reliable cross platform metric; specific FLQ CCS identification fingerprints have been produced, illustrating the potential to compliment MS/MS specificity or provide an alternative identification metric. Using cIM there is opportunity to correlate the erratic nature of protomer formation with the analytical conditions used and to gain further understanding of ionisation/dissociation mechanisms taking place during routine analyses.

Use of ion mobility mass spectrometry to enhance cumulative analytical specificity and separation to profile 6-C/8-C-glycosylflavone critical isomer pairs and known-unknowns in medicinal plants

INTRODUCTION

Plant medicine/herbal extracts are typically complex, encompassing a wide range of flavonoid diversity and biological benefits. Combined with a lack of standards; species authentication profiling is a challenge. A non-targeted screening strategy using two-dimensional (2D) separation and specificity of ultra-high-performance liquid chromatography ion mobility collision-induced dissociation mass spectrometry (UHPLC-IM-CID-MS) has been investigated, to identify the 6-C and 8-C-glycosylflavone isomer orientin/isoorientin and vitexin/isovitexin pairs in Passiflora species. Utilising available standards and "known-unknowns" a reference CCS (collision cross-section) speciation finger print for Passiflora extracts could be generated to illustrate species profiling.

MATERIAL AND METHODS

SPE was performed to extract flavonoids of interest from powdered and ground Passiflora leaf. Chromatographic separation was achieved via UHPLC and analysis performed using positive/negative ion electrospray coupled with linear T-wave IM-MS (calibrated to perform accurate mass and CCS measurements).

RESULTS

Comparative phytochemical screening of Passiflora alata, P. edulis, P. incarnata and P. caerulea leaf extracts has generated CCS, CID IM product ion spectra, 2D separation with UHPLC-IM-MS, enabling the unequivocal identification of flavone C-glycosides in complex extracts. A phytochemical reference CCS library was generated comprised of "knowns" and "known-unknowns". Isomers have been differentiated using a CCS metric enabling novel CCS specific isomeric quantitation of co-eluting isomers.

CONCLUSIONS

The screening approach illustrated has the potential to play an important role in the profiling of medicinal plants to determine phytochemical make-up and improve consumer safety through generation of highly specific speciation profiles.

Tandem Mass Spectrometry Imaging Reveals Distinct Accumulation Patterns of Steroid Structural Isomers in Human Adrenal Glands

Visualizing tissue distribution of steroid hormones is a promising application of MALDI mass spectrometry imaging (MSI). On-tissue chemical derivatization using Girard's T reagent has enhanced the ionization efficiency of steroids. However, discriminating between structural isomers with distinct bioactivities remains a challenge. Herein, we used ion trap MS/tandem MS (MS³) to distinguish a mineralcorticoid aldosterone (Aldo) and a glucocorticoid cortisol (F), from their structural isomers. Our method is also useful to detect hybrid steroids (18-hydroxycortisol [18-OHF] and 18-oxocortisol) with sufficient signal-to-noise ratio. The clinical applicability of the tandem MS method was evaluated by analyzing F, Aldo, and 18-OHF distributions in human adrenal glands. In such clinical specimens, small Aldo-producing cell clusters (APCCs) were identified and were first found to produce a high level of Aldo and not to contain F. Moreover, a part of APCCs produced 18-OHF, presumably converted from F by APCC-specific CYP11B2 activity. Catecholamine species were also visualized with another derivatization reagent (TAHS), and those profiling successfully discriminated pheochromocytoma species. These tandem MSI-methods, coupled with on-tissue chemical derivatization has proven to be useful for detecting low-abundance steroids, including Aldo and hybrid steroids and thus identifying steroid hormone-producing lesions.

Traveling Wave Ion Mobility Mass Spectrometry: Metabolomics Applications

Ion mobility (IM) spectrometry can separate gas-phase ions according to their charge, molecular shape, and size. In recent years, several IM technologies have been integrated with mass spectrometry (MS) and launched as commercially available instrumentation for metabolomics analysis. The addition of IM to MS-based metabolomics workflows provides an additional degree of separation to chromatography and MS resolving power, improving peak capacity and signal-to-noise ratio. Moreover, it makes possible to experimentally derive collision cross section (CCS), which can be used as an additional coordinate for metabolite identification, together with accurate mass and fragmentation information. The addition of CCS to current metabolome database would allow to filter and score molecules based on their CCS values, adding more confidence in the identification process during metabolomics experiments.In this chapter, we present procedures for the integration of travelling-wave (TW)-IM into traditional MS-based metabolomics workflows.

Formation of multimeric steroid metal adducts and implications for isomer mixture separation by traveling wave ion mobility spectrometry

Steroid analysis is essential to the fields of medicine and forensics, but such analyses can present some complex analytical challenges. While chromatographic methods require long acquisition times and often provide incomplete separation, ion mobility spectrometry (IMS) as coupled to mass spectrometry (MS) has demonstrated significant promise for the separation of steroids, particularly in concert with metal adduction and multimerization. In this study, traveling wave ion mobility spectrometry (TWIMS) was employed to separate multimer steroid metal adducts of isomers in mixtures. The results show the ability to separate steroid isomers with a decrease in resolution compared with single component standards because of the formation of heteromultimers. Additionally, ion-neutral collision cross sections (CCS) of the species studied were measured in the mixtures and compared with CCSs obtained in single component standards. Good agreement between these values suggests that the CCS may aid in identification of unknowns. Furthermore, a complex mixture composed of five sets of steroid isomers were analyzed, and distinct features for each steroid component were identified. This study further demonstrated the potential of TWIMS-MS methods for the rapid and isomer-specific study of steroids in biological samples for use either in tandem with or without chromatographic separation.

Potential of ion mobility-mass spectrometry for both targeted and non-targeted analysis of phase II steroid metabolites in urine

In recent years, the commercialization of hybrid ion mobility-mass spectrometers and their integration in traditional LC-MS workflows provide new opportunities to extend the current boundaries of targeted and non-targeted analyses. When coupled to LC-MS, ion mobility spectrometry (IMS) provides a novel characterization parameter, the so-called averaged collision cross section (CCS, Ω), as well as improves method selectivity and sensitivity by the separation of isobaric and isomeric molecules and the isolation of the analytes of interest from background noise. In this work, we have explored the potential and advantages of this technology for carrying out the determination of phase II steroid metabolites (i.e. androgen and estrogen conjugates, including glucuronide and sulfate compounds; n = 25) in urine samples. These molecules have been selected based on their relevance in the fields of chemical food safety and doping control, as well as in metabolomics studies. The influence of urine matrix on the CCS of steroid metabolites was evaluated in order to give more confidence to current CCS databases and support its use as complementary information to retention time (Rt) and mass spectra for compound identification. Samples were only diluted 10-fold with aqueous formic acid (0.1%, v/v) prior analysis. Only an almost insignificant effect of adult bovine urine matrix on the CCS of certain steroid metabolites was observed in comparison with calve urine matrix, which is a less complex sample. In addition, high accuracy was achieved for CCS measurements carried out over four months (ΔCCS < 1.3% for 99.8% of CCS measurements; n = 1806). Interestingly, it has been observed that signal-to-noise (S/N) ratio could be improved at least 2 or 7-fold when IMS is combined with LC-MS. In addition to the separation of isomeric steroid pairs (i.e. etiocholanolone glucuronide and epiandrosterone glucuronide, as well as 19-noretiocholanolone glucuronide and 19-norandrosterone glucuronide), steroid-based ions were also separated in the IMS dimension from co-eluting matrix compounds that presented similar mass-to-charge ratio (m/z). Finally, based on CCS measurements and as a proof of concept, 17α-boldenone glucuronide has been identified as one of the main metabolites resulted from boldione administration to calves.

Application of Group I Metal Adduction to the Separation of Steroids by Traveling Wave Ion Mobility Spectrometry

Steroids represent an interesting class of small biomolecules due to their use as biomarkers and their status as scheduled drugs. Although the analysis of steroids is complicated by the potential for many isomers, ion mobility spectrometry (IMS) has previously shown promise for the rapid separation of steroid isomers. This work is aimed at the further development of IMS separation for the analysis of steroids. Here, traveling wave ion mobility spectrometry (TWIMS) was applied to the study of group I metal adducted steroids and their corresponding multimers for five sets of isomers. Each set of isomers had a minimum of one dimeric metal ion adduct that exhibited a resolution greater than one (i.e., approaching baseline resolution). Additionally, ion-neutral collision cross sections (CCSs) were measured using polyalanine as a calibrant, which may provide an additional metric contributing to analyte identification. Where possible, measured CCSs were compared to previously reported values. When measuring CCSs of steroid isomers using polyalanine as the calibrant, nitrogen CCS values were within 1.0% error for monomeric sodiated adducts and slightly higher for the dimeric sodiated adducts. Overall, TWIMS was found to successfully separate steroids as dimeric adducts of group I metals. Graphical Abstract ᅟ.

Applications of Ion Mobility-Mass Spectrometry in Carbohydrate Chemistry and Glycobiology

Carbohydrate analyses are often challenging due to the structural complexity of these molecules, as well as the lack of suitable analytical tools for distinguishing the vast number of possible isomers. The coupled technique, ion mobility-mass spectrometry (IM-MS), has been in use for two decades for the analysis of complex biomolecules, and in recent years it has emerged as a powerful technique for the analysis of carbohydrates. For carbohydrates, most studies have focused on the separation and characterization of isomers in biological samples. IM-MS is capable of separating isomeric ions by drift time, and further characterizing them by mass analysis. Applications of IM-MS in carbohydrate analysis are extremely useful and important for understanding many biological mechanisms and for the determination of disease states, although efforts are still needed for higher sensitivity and resolution.

The potential of Ion Mobility Mass Spectrometry for high-throughput and high-resolution lipidomics

Lipids are a large and highly diverse family of biomolecules, which play essential structural, storage and signalling roles in cells and tissues. Although traditional mass spectrometry (MS) approaches used in lipidomics are highly sensitive and selective, lipid analysis remains challenging due to the chemical diversity of lipid structures, multiple isobaric species and incomplete separation using many forms of chromatography. Ion mobility (IM) separates ions in the gas phase based on their physicochemical properties. Addition of IM to the traditional lipidomic workflow both enhances separation of complex lipid mixtures, beneficial for lipid identification, and improves isomer resolution. Herein, we discuss the recent developments in IM-MS for lipidomics.

Investigating Differences in Gas-Phase Conformations of 25-Hydroxyvitamin D3 Sodiated Epimers using Ion Mobility-Mass Spectrometry and Theoretical Modeling

Drift tube ion mobility coupled with mass spectrometry was used to investigate the gas-phase structure of 25-hydroxyvitamin D3 (25OHD3) and D2 (25OHD2) epimers, and to evaluate its potential in rapid separation of these compounds. Experimental results revealed two distinct drift species for the 25OHD3 sodiated monomer, whereas only one of these conformations was observed for its epimer (epi25OHD3). The unique species allowed 25OHD3 to be readily distinguished, and the same pattern was observed for 25OHD2 epimers. Theoretical modeling of 25OHD3 epimers identified energetically stable gas-phase structures, indicating that both compounds may adopt a compact "closed" conformation, but that 25OHD3 may also adopt a slightly less energetically favorable "open" conformation that is not accessible to its epimer. Calculated theoretical collision cross-sections for these structures agreed with experimental results to <2%. Experimentation indicated that additional energy in the ESI source (i.e., increased temperature, spray voltage) affected the ratio of 25OHD3 conformations, with the less energetically favorable "open" conformation increasing in relative intensity. Finally, LC-IM-MS results yielded linear quantitation of 25OHD3, in the presence of the epimer interference, at biologically relevant concentrations. This study demonstrates that ion mobility can be used in tandem with theoretical modeling to determine structural differences that contribute to drift separation. These separation capabilities provide potential for rapid (<60 ms) identification of 25OHD3 and 25OHD2 in mixtures with their epimers. Graphical Abstract ᅟ.