Chemically modified cellulose paper as a thin film microextraction phase

Paper-supported polystyrene membranes for micro-solid phase extraction of date-rape drugs from urine: A sustainable analytical approach

BACKGROUND

The rapid development of micro-solid phase extraction (μ-SPE) procedures with new sorption materials, in particular, based on using natural materials, is currently reported. The production of these sorbents and the entire extraction procedure should support the implementation of Green Analytical Chemistry (GAC) principles. Promising materials are sorbents based on paper, which can be relatively easily modified, among others: by covering it with a polymer membrane. In this work, the practical application of paper-supported polystyrene used in the analysis of urine samples containing selected date-rape drugs (DRD) substances, and evaluation of the entire procedure using GAC metrics is presented.

RESULTS

The paper-supported polystyrene membranes were successfully fabricated and characterized. The successful polystyrene coating on the paper was confirmed through ATR-FTIR measurements, ensuring even coverage. The μ-SPE procedure using this material facilitated extraction with a throughput of approximately 120 samples per hour in just a few steps. Throughout the research, a mixture of 100 mM acetic acid:methanol:acetonitrile (70:15:15, v/v/v) was selected as an optimal background electrolyte for capillary electrophoresis - mass spectrometry analysis. Validation results of this method demonstrated its suitability, exhibiting good linearity (R2 > 0.95), low limits of detection (3.1-15 ng mL-1), acceptable precision (<15 %), and recovery for all tested analytes. Furthermore, the greenness evaluation conducted with six different metrics: AGREEprep, AGREE, ComplexGAPI, SPMS, hexagonal metric, and WAC indicated the overall eco-friendliness and sustainability of the method, with minor concerns regarding energy consumption.

SIGNIFICANCE

The use of cellulose paper with polystyrene membranes for μ-SPE provides a versatile and eco-friendly extraction method for detecting DRDs in urine samples. The presented work is an example of the use of GAC metrics in the evaluation of the analytical procedure. The optimized PT-μ-SPE/CE-MS method allows for minimized reagent usage and waste production. Moreover, the method proves to be sustainable and efficient for forensic toxicology analysis.

Modification of cellulose substrate by in situ synthesis of metal-organic framework-5 for thin film microextraction of some non-steroidal anti-inflammatory drugs and their measurement by high-performance liquid chromatography-ultraviolet detector

This work, reports the successful preparation a thin film by a simple and inexpensive process for quantification of a model analytes in the urine sample using HPLC-UV. To this end, cellulose paper was employed as a substrate for the in-situ synthesis of MOF-5, to increase the resistance of the prepared film. The prepared film can be reused 26 times with no reduction in its performance. The thin film prepared by MOF-5 modified cellulose substrate was utilized in thin film microextraction (TFME) method for the extraction and preconcentration of naproxen, aspirin, tolmetin, and celecoxib. Under optimal conditions, the linear dynamic range of the target analytes was 2-500 µg L-1 with correlation coefficients (R2) ranging from 0.9961 to 0.9990. Also, the limits of detection (LODs), the limits of quantification (LOQs) and relative standard deviation (RSD%) of the proposed method for selected analytes ranged between 0.57 and 0.77 µg L-1, 1.7 to 2.3 and 3.5 % to 6.2 %, respectively. Moreover, relative recoveries varied from of 94 % to 108 %, indicating the absence of matrices effect in the proposed method. Eventually, the TFME was successfully used for the extraction of selected analytes from urine samples.

Sustainable beeswax modified cellulose paper for the determination of tricyclic antidepressants in biofluids

This article describes the synthesis of sorptive phases for bioanalysis based on the modification of cellulose paper with natural beeswax as sorbent, resulting in a substrate completely renewable and sustainable. The preparation of the sorptive phases consisted of the dissolution of beeswax in hexane, followed by its drop-casting on cellulose paper and subsequent evaporation of the solvent. The beeswax modification of paper renders it hydrophobic, enabling the extraction of the target analytes, i.e., imipramine, desipramine, amitriptyline and trimipramine, via hydrophobic interactions. The main variables affecting the extraction performance were investigated (e.g., pH, ionic strength, extraction time, eluent composition, agitation speed). The analytical workflow combines a straightforward sampling, simultaneous extraction of 30 samples in 1 h, and the rapid (<2 min) determination of the analytes via direct infusion mass spectrometry. The method provided limits of detection in the range 2.0 and 3.2 μg L-1, and the precision, expressed as relative standard deviation, was better than 5.4 % and 8.5 % for intra and inter-day analyses, respectively. The accuracy, in terms of relative recovery, ranged from 90 % to 121 % using saliva as model biofluid.

Ultra-trace determination of cadmium in water and food samples by a thin-film microextraction using a supported liquid membrane combined with smartphone-based colorimetric detection

A mixture of n-octanol and dithizone was introduced as an effective and novel extraction agent in a thin-film microextraction technique for the pre-concentration of cadmium ions. The extraction agent was immobilized on small pieces of porous polypropylene flat membrane as a supported liquid membrane. The analyte extraction was performed by immersing the modified film in the sample solution, and via a complex formation between the immobilized dithizone on the film and cadmium ions. After the thin-film microextraction process, the colored cadmium-dithizone complex was directly measured by a smartphone colorimetric analysis. Under optimized conditions, the linear dynamic range, the limit of detection, and the limit of quantification were 0.5-300.0, 0.1, and 0.4 μg L^-1, respectively. The developed technique was successfully employed to quantify cadmium ions in water and food samples. The high relative recovery values (95.0-103.0%) along with relative standard deviations of less than 2.5% were obtained for the spiked samples.

Benzoyl isothiocyanate modified surface of silica gel as the extraction material for adsorbing steroid hormones in water

Steroid hormones have been listed as priority pollutants in the environment, and their detection and pollution control deserve our extensive attention. In this study, a modified silica gel adsorbent material was synthesized by benzoyl isothiocyanate reaction with hydroxyl groups on the silica gel surface. The modified silica gel was used as a solid phase extraction filler for the extraction of steroid hormones from water, which was further analyzed by the HPLC-MS/MS method. The FT-IR, TGA, XPS, and SEM analysis indicated that benzoyl isothiocyanate was successfully grafted on the surface of silica gel to form a bond with an isothioamide group and benzene ring as the tail chain. The modified silica gel synthesized at 40 °C showed excellent adsorption and recovery rates for three steroid hormones in water. Methanol at pH 9.0 was selected as the optimal eluent. The adsorption capacity of the modified silica gel for epiandrosterone, progesterone, and megestrol acetate was 6822 ng mg^-1, 13 899 ng mg^-1, and 14 301 ng mg^-1, respectively. Under optimal conditions, the limit of detection (LOD) and limit of quantification (LOQ) for 3 steroid hormones by modified silica gel extraction with HPLC-MS/MS detection were 0.02-0.88 μg L^-1 and 0.06-2.22 μg L^-1, respectively. The recovery rate of epiandrosterone, progesterone, and megestrol was between 53.7% and 82.9%, respectively. The modified silica gel has been successfully used to analyze steroid hormones in wastewater and surface water.

Poly-(MMA-IL) filter paper: A new class of paper-based analytical device for thin-film microextraction of multi-class antibiotics in environmental water samples using LC-MS/MS analysis

A paper-based polymeric ionic liquid (p-Poly-(MMA-IL)) was successfully developed by grafting the polymeric ionic liquid on the surface of commercial filter paper (FP) by using the dipping method, presenting a new cost-effective film. The newly developed p-Poly-(MMA-IL) FP was then applied as a paper-based thin-film microextraction (p-TFME) analytical device to extract 14 compounds as representative of five groups of antibiotic drugs, which were sulfonamides, tetracyclines, fluoroquinolones, penicillin and macrolides in environmental water samples. Besides, p-Poly-(MMA-IL) FP, p-Poly-(MMA) FP, and unmodified filter paper were successfully characterised by FTIR, NMR, FESEM, TGA, and XRD techniques. They underwent significant parameters optimisation, which affected the extraction efficiency. Under optimal conditions, the proposed (p-Poly-(MMA-IL) FP-TFME) device method was evaluated and applied to analyse multi-class antibiotic drugs in environmental water samples by using a liquid chromatography-mass spectrometry (LC-MS). The validation method showed that a good linearity (0.1 μg L^-1 - 500 μg L^-1) was noted (R² > 0.993, n = 3). Detection and quantification limits were within 0.05 μg L^-1 - 4.52 μg L^-1 and 0.15 μg L^-1 - 13.6 μg L^-1, respectively. The relative standard deviation (RSD) values ranged at 1.4%-12.2% (intra-day, n = 15) and 4.4%-11.0% (inter-day, n = 10). The extraction recoveries of environmental water samples ranged from 79.1% to 126.8%, with an RSD of less than 15.4% (n = 3). The newly developed paper-based polymeric ionic liquid (p-Poly-(MMA-IL) FP) for analysis of multi-class antibiotic drugs under the p-TFME analytical device procedure was successfully achieved with limited sample volume and organic solvent, fast extraction, and feasible in daily analysis. The detection concentration and relative RSD of multi-class antibiotics determined in various environmental water samples by the proposed method (n = 5) were within 0.44 μg L^-1 - 54.41 μg L^-1 and 0.69%-15.56%, respectively. These results signified the potential of the p-Poly-(MMA-IL) FP-TFME device as an efficient, sensitive and environmentally friendly approach for analysing antibiotics.

Porous agarose/chitosan/graphene oxide composite coupled with deep eutectic solvent for thin film microextraction of chlorophenols

In this project, a three-dimensional graphene oxide coated agarose/chitosan (ACGO) porous film was synthesized and utilized as sorbent in thin film microextraction (TFME) technique to extract 4-chlorophenol, 2,4-dichlorophenol, 3,5-dichlorophenol and 2,4,6-trichlorophenol as the model analytes in various real samples such as agricultural waste water, honey and tea samples. In addition, deep eutectic solvent made of tetra ethyl ammonium chloride/chlorine chloride was used as a desorption solvent. The effect of various variables, such as: extraction time, stirring rate, solvent desorption volume, desorption time, ionic strength and solution pH on the extraction efficiency of the method was studied and optimized. Under the optimized condition, the linear range of the method was obtained in the range of 0.1-500μgL^-1 for testing analytes (4-chloropheol=0.1-500μgL^-1, 2,4-dichlorophenol=0.2-500μgL^-1, 3,5-dichlorophenol=0.5-500μgL^-1 and 2,4,6-trichlorophenol=0.2-500μgL^-1). The obtained correlation coefficients (r²) were between 0.9984 and 0.9994. The limits of detection (LODs) were also calculated between 0.03 - 0.13μgL^-1. The relative standard deviations (RSDs%) were obtained in the range of 2.8 to 5.9%. The enrichment factor (EFs) values for the studied analytes were also obtained in the range of 33.4-35.8. In addition, the obtained results indicated that the prepared film can potentially be used for more applications in the field of environment, food safety, and drug analysis.

Silica aerogel modified electrospun polyacrylonitrile as a sorbent for thin-film microextraction of chlorpyrifos from real samples coupled with corona discharge ion mobility spectrometry detection

In this paper, modified polyacrylonitrile/silica aerogel fibers were prepared and used as an adsorbent for thin-film microextraction of chlorpyrifos. The extracted analyte was analyzed by corona discharge ion mobility spectrometry. The electrospinning method was applied for the preparation of polyacrylonitrile fibers. The alkaline hydrolyzation technique was used to modify the electrospun film surface. Silica aerogel was synthesized on the surface of modified electrospun polyacrylonitrile fibers by the in situ growth technique. To access a high extraction yield, effective synthesis and extraction parameters such as NaOH concentration, reaction temperature and time, thin-film pretreatment, gelation time, solution pH, ionic strength, and extraction time were studied. The linearity range and the limit of detection of the method were 1-100 μg L^-1 and 0.3 μg L^-1, respectively. The precision of the method was 4 and 12% for the concentration levels of 5 and 60 μg L^-1, respectively. Chlorpyrifos was successfully determined by the method in well water, river water, agricultural wastewater, and tangerine samples.

Potential of hydrophobic paper-based sorptive phase prepared by in-situ thermal imidization for the extraction of methadone from oral fluid samples

Paper-based sorptive phases (PSPs) are functional planar materials with a demonstrated potential in analytical sample preparation. This article describes the synthesis of a polyimide coated paper by an in-situ imidization at a high temperature. Polyimides (PI) are synthesized in two subsequent steps where a hydrophilic polymer, in this case, poly(amic acid) (PAA), is formed as an intermediate product. PAA is finally transformed into hydrophobic PI by thermal curing at 180 °C. The synthesis of PI-paper takes advantage of this two-step procedure. In the first stage, a segment of filter paper is immersed into an aqueous PAA solution. After the solvent evaporation, the paper is heated at 180 °C for 1 h inducing the formation of the hydrophobic PI over the cellulose fibers. Infrared spectroscopy has been used to characterize the synthesized materials by defining a coverage factor F. The hydrophobicity of the materials has been studied using an aqueous methylene blue solution as a marker. To fully demonstrate the usefulness of the material in the sample preparation field, the extraction of methadone from oral fluid (OF) samples has been considered as a model analytical problem. The main variables affecting the synthesis (PAA concentration on the precursor solution and number of dips) and the extraction (elution and extraction times) have been fully evaluated. Working under the optimum conditions, a limit of quantification of 9 µg/L, intraday and interday precision better than 14.6%, and accuracy in the range of 87-108% were obtained.

Pre-cleaned bare wooden toothpicks for the determination of drugs in oral fluid by mass spectrometry

This article deepens the potential of pre-cleaned bare wooden toothpicks (pb-WTs) for extracting drugs (antidepressants and acetaminophen) from oral fluid samples. The leaching of the intrinsic compounds from the wood matrix is identified as the main challenge for the final determination of the targets, even when a very selective instrumental technique, such as mass spectrometry, is employed. The pre-cleaning of the WTs is proposed for improving the analytical performance. The number of cleaning cycles depends on the injection mode (direct infusion or chromatography) into the mass spectrometer. The different variables affecting the extraction of selected antidepressant drugs were studied in detail, and the optimum procedure was validated using the two mentioned injection modes. The limits of detection were in the ranges 0.1–0.5 ng/mL and 0.1–0.3 ng/mL for direct infusion and liquid chromatography, respectively. The intra-day precision (expressed as relative standard deviation) was better than 12.1% and 8.6%, for direct infusion and liquid chromatography, respectively. Single-blind samples were used to study the applicability of the method. Finally, as a proof-of-concept, the potential of pb-WTs for in vivo sampling was outlined.

Combination of polyurethane and polymethyl methacrylate thin films as a microextraction sorbent for rapid adsorption and sensitive determination of neonicotinoid insecticides in fruit juice and tea by ultra high performance liquid chromatography with tandem mass spectrometry

An economical and effective thin film microextraction (TFME) for simultaneous analysis of ten neonicotinoid insecticides and metabolites in fruit juice and tea, was developed based on the combination of polyurethane (PU) and polymethyl methacrylate (PMMA) films as the sorbent followed by ultra high performance liquid chromatography with tandem mass spectrometry. The PU/PMMA composite was evidenced to possess rapid adsorption and strong accumulation towards neonicotinoids compared with the films used alone. A series of parameters were optimized, and the agitation mode, film size, ionic strength, desorption solvent and sample pH were found to dominate the microextraction process rather than the extraction temperature, agitation time and sample volume. The thin films are cost effective and efficient for single use analysis, but still can be reused at least 8 times with no significant loss in performance. The ten neonicotinoids were measured with good recoveries (81.1-107.9%), high enrichment factors (up to 135), low limits of detection (0.001-0.1 µg L^-1), and wide linearity range (1-500 µg L^-1, r²>0.9981) in fruit juice (apple, lemon, and pomegranate) and tea (green tea and black tea) samples. The proposed method was successfully applied to commercial fruit and tea drinks, and no samples were tested positive on target neonicotinoids. The PU/PMMA based TFME has shown great potential as an alternative to exhaustive extraction techniques for routine screening of trace neonicotinoids in fruit juice and tea by simplifying the analytical procedure, shortening the operation time, and lowering the material expense.

A paper-based polystyrene/nylon Janus platform for the microextraction of UV filters in water samples as proof-of-concept

A new mix-mode cellulose-based sorptive phase is described that combines two different polymeric domains (i.e., nylon and polystyrene), thus providing simultaneous hydrophilic and hydrophobic features as a result. By analogy with Janus materials, the new paper-based sorptive phase has been named paper-based polystyrene/nylon Janus-platform (P-Ps/Ny-JP). The main advantages of the proposed P-Ps/Ny-JP are the sustainability, simplicity in synthesis, and low cost of this extraction device. The main parameters affecting the synthesis (i.e., coating procedure and polymers proportion) have been studied, and the resulting material has been characterized via scanning electron microscopy and infrared spectroscopy. As a proof-of-concept, the simultaneous extraction of fourteen UV filters of a wide range of polarity, with log P values ranging from - 0.234 to 16.129, from water samples and their determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been performed. The proposed methodology enables the determination of these chemicals with limits of detection from 12 to 71 ng L^-1, and the precision, expressed as a relative standard deviation, was below 15%. The extraction device was applied to the analysis of real water samples likely to contain UV filters (i.e., two private swimming pool water and one seawater) and the recovery values were in the range 73-121%.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.

A novel nanocomposite based on covalent organic polymer and nanocellulose for thin-film microextraction of imipramine from biological samples

A novel covalent organic polymer was prepared using 1,5-diaminonaphthalene as a linker and cyanuric chloride as a node. A thin-film nanocomposite of 1,5-diaminonaphthalene covalent organic polymer and cellulose nanocrystalline was then fabricated via filtering and casting method. The effect of incorporation of various amounts of 1,5-diaminonaphthalene covalent organic polymer and cellulose nanocrystalline was studied to obtain an efficient nanocomposite thin-film with a large number of polar functional groups and high mechanical stability. Field emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectrometry, and thermogravimetric analysis techniques were applied for the characterization of physicochemical properties of the prepared materials. Imipramine was determined in the biological samples using thin-film microextraction followed by gas chromatography flame ionization detection. Parameters affecting the extraction efficiency of imipramine were investigated. Under the optimized conditions, the limit of detection was 0.5 ng/mL. Film-to-film reproducibility for three different films fabricated under the same conditions (at three concentration levels) varied between 8.9 and 9.7%. The linear dynamic range covered more than three orders of magnitude (2-5000 ng/mL) with a determination coefficient of 0.9985. The method was successfully applied for preconcentration and determination of imipramine in biological samples with spiking recoveries between 78 and 93%.

Partially carbonized cellulose filter paper as a green adsorbent for the extraction of pesticides from fruit juices

In this study, a new solid phase extraction method based on the use of a low-cost funnel-shaped partially carbonized cellulose filter paper as a sorbent has been developed. The sorbent is easily prepared by heating the folded filter paper wetted with sulfuric acid solution and can be reused for several times. It is combined with dispersive liquid-liquid microextraction and used for the extraction of some pesticide residues from fruit juice samples prior to their analysis by gas chromatography-flame ionization detection. In this work, limits of detection and quantification were in the ranges of 0.30-0.61 and 1.0-2.0 µg L^-1, respectively, and relative standard deviations ranged between 3 and 6% for intra- (n=5) and inter-day (n=5) precisions at a concentration of 25 µg L^-1 of each pesticide. The enrichment factors of 452-751 were achieved. Extraction recoveries were in the range of 45-75%. The calibration curves had wide linear ranges with a good linearity (coefficient of determination ≥ 0.994). Finally, efficiency of the method was apprised by determining the analytes in fruit juice samples and relative recoveries were found to be in the range of 85-101%.

Synergistic combination of polyamide-coated paper-based sorptive phase for the extraction of antibiotics in saliva

The development of analytical methods that allow the simultaneous determination of a wide range of analytes with different properties is one of the focuses of attention in Analytical Chemistry. This work describes a proof-of-concept of the synergistic extraction of a planar paper-based sorptive phase modified with a polyamide such as nylon. This as-prepared sorptive phase enables the extraction of six penicillin-derived antibiotics of different polarity from human saliva samples in the same analysis, since the analytes either interact with the paper or with the nylon. The synthesis of the sorptive phase is simple as it only requires dipping the paper into an organic solution of the polymer (i.e., nylon in formic acid). Then, the modified paper-based sorptive phase is introduced in an Eppendorf tube to perform the extraction of the analytes, and subsequent desorption and measurement by liquid chromatography-tandem mass spectrometry. Under the optimized extraction conditions, the method enables the determination of the analytes in saliva samples with limits of detection from 2.4 to 3.7 ng mL^-1. Relative standard deviation (RSD) below 10% for all the target analytes and relative recoveries between 84 and 123% were achieved by using matrix-matched calibration. The results confirm the versatility and the synergistic extraction of the polyamide-coated paper-based sorptive phase, and its potential to be applied in bioanalysis. Moreover, the easy synthesis of the sorptive phase and the low cost of its preparation, as well as the high sample throughput analysis, are some of the main features of the proposed method.

In-situ formation of Zn-Al layered double oxides on electrochemically anodized nanoporous aluminum film as sorbent for chlorophenols extraction from water and wastewater followed by determination using HPLC

Herein, we present a simple, cost-effective, and robust strategy for the in-situ preparation of Zn-Al layered double oxides-anodized aluminum thin film via a facile hydrothermal method, followed by calcination treatment of the Zn-Al layered double hydroxide in the air atmosphere. The in-situ prepared Zn-Al layered double oxide-anodized aluminum film was implemented as sorbent for thin film microextraction of four selected chlorophenols (4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, and pentachlorophenol), followed by high-performance liquid chromatography-ultraviolet detection. The different variables of the thin film microextraction were screened via Plackett-Burman design and then optimized through Box-Behnken design. Under the optimum condition, the method showed good linear ranges (0.2-200 μg/L) with the coefficient of determinations higher than 0.9938. The calculated limit of detections were between 0.07 and 0.56 μg/L. Relative standard deviations of the method for determination of the analytes at 5 μg/L concentration level (n = 3) were ranged from 3.5 to 3.9% (as interday). The enrichment factors were between 39 and 58. This extraction method was demonstrated to be fast, efficient, and convenient. To study the capability of the developed method for real sample analysis, tap, well, river, and two types of wastewater samples were satisfactorily analyzed.

Hierarchical zeolitic imidazolate framework-67 derived from in-situ synthesized CO-Al layered double hydroxide embedded within porous-anodized aluminum foil for thin film microextraction of caffeine followed by its high performance liquid chromatography-ultraviolet detection

In this study, the in-situ conversion of the synthesized Co-Al layered double hydroxide (Co-Al LDH) nanosheets to three dimensional hierarchical zeolitic imidazolate framework-67 (3D HZIF-67) was presented as a cost-effective, highly efficient, flexible and robust sorbent to carry out the microextraction process. In the first stage, the anodized aluminum foil was prepared electrochemically. Then, the Co-Al LDH precursor was constructed on the surface of the previously-prepared anodized Al foil applying in-situ formation approach. The procedure is followed by the conversion of the prepared Co-Al LDH film to 3D HZIF-67 film via a facile solvothermal method without adding cobalt salt. The in-situ prepared 3D HZIF-67-anodized Al was used for the thin film microextraction (TFME) of caffeine. The effective factors in TFME procedure were investigated and optimized through applying Central Composite Design (CCD). In the obtained optimal condition, the calibration curves for TFME-HPLC-UV of caffeine were linear in the range of 1-200 µg L^-1 with the coefficient of determination (r²) higher than 0.9915. The limits of detection were 0.33 and 0.38 µg L^-1, in water and urine matrices, respectively. Moreover, the enrichment factors (EFs) and absolute recoveries (%AR) were also calculated as 173-198 and 57.1%-65.3%, respectively. The inter-day relative standard deviations (RSDs) were evaluated as the method precision for 20 and 200 µg L^-1 of spiked sample and were between 4.9-6.1%. The repeatability of the preparation step was investigated as batch-to-batch reproducibility and it was found to be 4.9%; as a result, the reproducibility of the presented film was approved. Finally, the proposed method was utilized to determine caffeine (as the model analyte) from different types of real samples including urine, coffee, beverage (Pepsi) and shampoo. The obtained recoveries (higher than 88%) confirmed the capability of the method for real sample analysis.

Paper-based sorptive phases for microextraction and sensing

The simplification of the analytical procedures, including cost-effective materials and detectors, is a current research trend. In this context, paper has been identified as a useful material thanks to its low price and high availability in different compositions (office, filter, chromatographic). Its porosity, flexibility, and planar geometry permit the design of flow-through devices compatible with most instrumental techniques. This article provides a general overview of the potential of paper, as substrate, on the simplification of analytical chemistry methodologies. The design of paper-based sorptive phases is considered in-depth, and the different functionalization strategies are described. Considering our experience in sample preparation, special attention has been paid to the use of these phases under the classical microextraction-analysis workflow, which usually includes a chromatographic separation of the analytes before their determination. However, the interest of these materials extends beyond this field as they can be easily implemented into spectroscopic and electrochemical sensors. Finally, the direct analysis of paper substrates in mass spectrometry, in the so-called paper-spray technique is also discussed. This review is more focused on presenting ideas rather than the description of specific applications to draw a general picture of the potential of these materials.

Non-Fluorinated Omniphobic Paper with Ultralow Contact Angle Hysteresis

Existing methods for fabricating oil-repellent paper rely on highly fluorinated and therefore toxic chemicals. Non-fluorinated omniphobic paper with low contact angle hysteresis (CAH) has not been demonstrated. We report a facile method to prepare omniphobic paper through the vapor-phase deposition of chlorosilane molecules to create "liquid-like" polymer brushes on commercially available release liners. Compared to polymer brushes grafted from solution, this solvent-free method avoided physical deformation of the paper, such as curling or wrinkling. The obtained paper displayed low CAH (<6°) and roll-off angles for liquids exhibiting a broad range of surface tension, from 72.8 to 22.4 mN m^-1. A hexadecane droplet (15 μL, 27.5 mN m^-1) slid off the paper at a tilt angle less than 4°. The effects of surface roughness, composition, and the presence of particle additives on the wetting properties were investigated. The utility of the omniphobic paper was demonstrated in microfluidic, oil funnel, microtiter plate, and food packaging container applications.

Returning to Nature for the Design of Sorptive Phases in Solid-Phase Microextraction

Green analytical chemistry principles aim to minimize the negative impact of analytical procedures in the environment, which can be considered both at close (to ensure the safety of the analysts) and global (to conserve our natural resources) levels. These principles suggest, among other guidelines, the reduction/minimization of the sample treatment and the use of renewable sources when possible. The first aspect is largely fulfilled by microextraction, which is considered to be among the greenest sample treatment techniques. The second consideration is attainable if natural products are used as raw materials for the preparation of new extraction phases. This strategy is in line with the change in our production system, which is being gradually moved from a linear model (take–make–dispose) to a circular one (including reusing and recycling as key terms). This article reviews the potential of natural products as sorbents in extraction and microextraction techniques from the synergic perspectives of two research groups working on the topic. The article covers the use of unmodified natural materials and the modified ones (although the latter has a less green character) to draw a general picture of the usefulness of the materials.

Microextraction approaches for bioanalytical applications: An overview

Biological samples are usually complex matrices due to the presence of proteins, salts and a variety of organic compounds with chemical properties similar to those of the target analytes. Therefore, sample preparation is often mandatory in order to isolate the analytes from troublesome matrices before instrumental analysis. Because the number of samples in drug development, doping analysis, forensic science, toxicological analysis, and preclinical and clinical assays is steadily increasing, novel high throughput sample preparation approaches are calling for. The key factors in this development are the miniaturization and the automation of the sample preparation approaches so as to cope with most of the twelve principles of green chemistry. In this review, recent trends in sample preparation and novel strategies will be discussed in detail with particular focus on sorptive and liquid-phase microextraction in bioanalysis. The actual applicability of selective sorbents is also considered. Additionally, the role of 3D printing in microextraction for bioanalytical methods will be pinpointed.

A Review of the Surface Modification of Cellulose and Nanocellulose Using Aliphatic and Aromatic Mono- and Di-Isocyanates

Nanocellulose has been subjected to a wide range of chemical modifications towards increasing its potential in certain fields of interest. These modifications either modulated the chemistry of the nanocellulose itself or introduced certain functional groups onto its surface, which varied from simple molecules to polymers. Among many, aliphatic and aromatic mono- and di-isocyanates are a group of chemicals that have been used for a century to modify cellulose. Despite only being used recently with nanocellulose, they have shown great potential as surface modifiers and chemical linkers to graft certain functional chemicals and polymers onto the nanocellulose surface. This review discusses the modification of cellulose and nanocellulose using isocyanates including phenyl isocyanate (PI), octadecyl isocyanate (OI), toluene diisocyanate (TDI), diphenylmethane diisocyanate (MDI), hexamethylene diisocyanate (HMDI), and their derivatives and polymers. It also presents the most commonly used nanocellulose modification strategies including their advantages and disadvantages. It finally discusses the challenges of using isocyanates, in general, for nanocellulose modification.

A review of developments and applications of thin-film microextraction coupled to surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) greatly expands the applications of Raman spectroscopy and is a promising technique for food safety, environmental analysis, and public safety. Thin-film microextraction (TFME) provides an efficient sample preparation method for SERS to improve its selectivity and detection efficiency. This review comprehensively describes the development and applications of SERS and TFME, including the history, mechanisim, and active substrate of SERS and the theory, device, forms, and practical applications of TFME. The applications of TFME-SERS in food safety and environment monitoring are discussed, which could improve their advantages. TFME extracts and enriches the target analytes to eliminate the interfering substance, providing a facial way for SERS to analyze the target analytes in complex matrices. The development of TFME-SERS technology not only expands the application range of TFME, but greatly improves the anti-interference ability and detection sensitivity of SERS. Thus, the established methods are fast, convenient, and highly sensitive. This technology is potential to be applied in the on-site and real-time detection.

Magnesium-aluminum-layered double hydroxide-graphene oxide composite mixed-matrix membrane for the thin-film microextraction of diclofenac in biological fluids

Herein, the applicability of Mg-Al-layered double hydroxide-graphene oxide (LDH/GO) mixed-matrix membrane (MMM) for microextraction purposes is reported for the first time. The LDH/GO MMM was used as sorbent for the thin film microextraction (TFME) of diclofenac in human body fluids. The prepared LDH/GO composite has been incorporated into a mechanically stable polyvinylidene difluoride (PVDF) membrane. The contribution of GO in LDH/GO composites significantly improved the extraction efficiency of the TFME sorbent. After elution with methanol, diclofenac was quantified by high performance liquid chromatography-ultraviolet detection (HPLC-UV). Plackett-Burman design was used for screening the experimental factors of interest and specify the significant variables affecting the extraction efficiency. The effective factors were optimized using Box-Behnken design (BBD). Under the optimum conditions, limits of detections (LODs) were 0.14, 0.23 and 0.57 μg L^-1 in water, urine and plasma samples, respectively. Limits of quantifications (LOQs) were 0.46, 0.76 and 1.8 μg L^-1 in water, urine and plasma samples, respectively. Relative standard deviations (RSDs) at a spiked concentration of 10 μg L^-1 were 6.7, 6.9 and 7.1% (as intra-day RSD) in water, urine and plasma samples, respectively. The linear dynamic ranges (LDRs) were in the range of 0.5-200 μg L^-1. The applicability of the method was investigated by the extraction and determination of diclofenac in different biological fluids including urine and plasma samples.

Carbon Nanohorn Suprastructures on a Paper Support as a Sorptive Phase

This article describes a method for the modification of paper with single-wall carbon nanohorns (SWCNHs) to form stable suprastructures. The SWCNHs form stable dahlia-like aggregates in solution that are then self-assembled into superior structures if the solvent is evaporated. Dipping paper sections into a dispersion of SWCNHs leads to the formation of a thin film that can be used for microextraction purposes. The coated paper can be easily handled with a simple pipette tip, paving the way for disposable extraction units. As a proof of concept, the extraction of antidepressants from urine and their determination by direct infusion mass spectrometry is studied. Limits of detection (LODs) were 10 ng/L for desipramine, amitriptyline, and mianserin, while the precision, expressed as a relative standard deviation, was 7.2%, 7.3%, and 9.8%, respectively.

A Paper-Based Analytical Device Based on Combination of Thin Film Microextraction and Reflection Scanometry for Sensitive Colorimetric Determination of Ni(II) in Aqueous Matrix

In this research, the thin film microextraction method was applied for the extraction of Ni(II) ion from aqueous matrixes. Chemically modified cellulosic filter paper with phosphorus was used as a thin film extractor. After extraction, the thin film was treated with a solution of dimethylglyoxime. The colored film was captured by flatbed scanner and the absorbance of the images was extracted by some suitable software. Under the optimum conditions and at the pH 7.0, with the sample volume of 100 mL, the stirring rate of 800 rpm, and the extraction time of 50 min, the calibration curve was obtained in the range of 0.05-5 mg/L Ni(II) (R² = 0.989). Limit and relative standard deviation were achieved to be 18 µg/L and less than 6.7%, respectively. Relative recoveries were obtained in the range of 87%-105%. Finally, the proposed method was found to be simple and cost-effective, with adequate analytical performance for the rapid detection of Ni(II) in river and wastewater samples.

Phenyl carbamate functionalized zinc oxide nanorods for paper-based thin film microextraction

In this work, phenyl carbamate functionalized zinc oxide nanorods were fabricated on a cellulose filter paper and employed as a novel and low cost sorbent in a thin film microextraction (TFME) technique.

Immobilized aptamer paper spray ionization source for ion mobility spectrometry

A selective thin-film microextraction based on aptamer immobilized on cellulose paper was used as a paper spray ionization source for ion mobility spectrometry (PSI-IMS), for the first time. In this method, the paper is not only used as an ionization source but also it is utilized for the selective extraction of analyte, based on immobilized aptamer. This combination integrates both sample preparation and analyte ionization in a Whatman paper. To that end, an appropriate sample introduction system with a novel design was constructed for the paper spray ionization source. Using this system, a continuous solvent flow works as an elution and spray solvent simultaneously. In this method, analyte is adsorbed on a triangular paper with immobilized aptamer and then it is desorbed and ionized by elution solvent and applied high voltage on paper, respectively. The effects of different experimental parameters such as applied voltage, angle of paper tip, distance between paper tip and counter electrode, elution solvent type, and solvent flow rate were optimized. The proposed method was exhaustively validated in terms of sensitivity and reproducibility by analyzing the standard solutions of codeine and acetamiprid. The analytical results obtained are promising enough to ensure the use of immobilized aptamer paper-spray as both the extraction and ionization techniques in IMS for direct analysis of biomedicine.

In vivo and ex vivo SPME: a low invasive sampling and sample preparation tool in clinical bioanalysis

Solid phase microextraction (SPME) is well-established technology in bioanalysis. Current review discusses the features of SPME, which determine the non- or low-invasiveness of the method in biomedical analysis. In the first section we analyze the factors, which have significant influence on the SPME sampling device performance in the view of sampling safety and efficiency. In the later sections applicability of various SPME approaches for analysis of easily accessible samples routinely used for analysis (e.g., urine, blood) as well as limited availability samples (tissues) is discussed. Moreover, the examples of sampling alternative matrices such as hair, saliva, sweat or breath are presented. The advantages and limitation of the technology in the view of future development of SPME are also reviewed.

Anticodeine aptamer immobilized on a Whatman cellulose paper for thin-film microextraction of codeine from urine followed by electrospray ionization ion mobility spectrometry

A combination of thin-film microextaction based on an aptamer immobilized on modified Whatman cellulose paper followed by electrospray ionization ion mobility spectrometry has been developed for the analysis of codeine in urine samples. The immobilization is based on the covalent linking of an amino-modified anticodeine aptamer to aldehyde groups of the oxidized cellulose paper. The covalent bonds were examined by infrared spectroscopy and elemental analysis. The effect of the extraction parameters, including the elution conditions (solvent type and volume), extraction time, and extraction temperature, on the extraction efficiency were investigated. Under the optimized conditions, the linear dynamic range was found to be 10-300 ng/mL with a detection limit of 3.4 ng/mL for codeine in urine. The relative standard deviation was 6.8% for three replicate measurements of codeine at 100 ng/mL in urine. Furthermore, the samples were analyzed with a standard method for the analysis of codeine using high-performance liquid chromatography with ultraviolet detection. The comparison of the results validates the accuracy of the proposed method as an alternative method for the analysis of codeine in urine samples.