New sorbent in the dispersive solid phase extraction step of quick, easy, cheap, effective, rugged, and safe for the extraction of organic contaminants in drinking water treatment sludge

Systematic Comparison of Extract Clean-Up with Currently Used Sorbents for Dispersive Solid-Phase Extraction

Dispersive solid-phase extraction (dSPE) is a crucial step for multiresidue analysis used to remove matrix components from extracts. This purification prevents contamination of instrumental equipment and improves method selectivity, sensitivity, and reproducibility. Therefore, a clean-up step is recommended, but an over-purified extract can lead to analyte loss due to adsorption to the sorbent. This study provides a systematic comparison of the advantages and disadvantages of the well-established dSPE sorbents PSA, GCB, and C18 and the novel dSPE sorbents chitin, chitosan, multi-walled carbon nanotube (MWCNT), and Z-Sep® (zirconium-based sorbent). They were tested regarding their clean-up capacity by visual inspection, UV, and GC-MS measurements. The recovery rates of 98 analytes, including pesticides, active pharmaceutical ingredients, and emerging environmental pollutants with a broad range of physicochemical properties, were determined by GC-MS/MS. Experiments were performed with five different matrices, commonly used in food analysis (spinach, orange, avocado, salmon, and bovine liver). Overall, Z-Sep® was the best sorbent regarding clean-up capacity, reducing matrix components to the greatest extent with a median of 50% in UV and GC-MS measurements, while MWCNTs had the largest impact on analyte recovery, with 14 analytes showing recoveries below 70%. PSA showed the best performance overall.

Multiresidue analysis of bat guano using GC-MS/MS

Bats are the second largest mammalian order and are an endangered species group with a strong need for contamination monitoring. To facilitate non-invasive monitoring of the ecological burden in bat populations, a multiresidue method for the simultaneous quantification of 119 analytes including pesticides, persistent organic pollutants (POPs), active pharmaceutical ingredients (APIs), polycyclic aromatic hydrocarbons (PAHs), UV blockers, plasticizers, and other emerging pollutants in bat guano with gas chromatography tandem mass spectrometry (GC-MS/MS) was developed. Sample preparation and clean-up were performed with a modified QuEChERS approach based on DIN EN 15662. The method uses 1.00 g bat guano as sample with acetonitrile and water for liquid-liquid extraction. Phase separation is assisted by citrate-buffered salting out agent. For clean-up of the extract, primary secondary amine (PSA) was combined with graphitized carbon black (GCB). The lower limits of quantification (LLOQ) ranged between 2.5 and 250 µg kg-1. Linearity was shown in a concentration range from the respective LLOQs to 1250 µg kg-1. The median of the mean recovery was 102.4%. Precision was tested at three concentrations. Method and injection precision were adequate with a relative standard deviation (RSD) below 20%. Furthermore, the comparative analysis with LC-MS/MS demonstrated the reliability of the results and provided a valuable extension of the analytical scope. As proof of concept, three guano samples from a German nursery roost of Myotis myotis were analysed. The results show a time-dependent change in contaminant concentration, highlighting the strong need for non-invasive contamination monitoring of whole bat populations.

Development and validation of a micro-QuEChERS method with high-throughput enhanced matrix removal followed with UHPLC-QqQ-MS/MS for analysis of raspberry ketone-related phenolic compounds in adipose tissues

Raspberry ketone (RK) is a major flavor compound in red raspberries, and it has been marketed as a popular weight-loss dietary supplement with high potential in accumulating in fatty tissues. However, challenges in extracting and characterizing RK and its associated phenolic compounds in fatty tissues persist due to the complex matrix effect. In this work, we reported a high-throughput sample preparation method for RK and 25 related phenolic compounds in white adipose tissues using an improved micro-scale QuEChERS (quick, efficient, cheap, easy, rugged and safe) approach with enhanced matrix removal (EMR)-lipid cleanup in 96-well plates, followed by UHPLC-QqQ-MS/MS analysis. The absolute recovery was 73-105% at the extraction step, and achieved 71-96% at the EMR cleanup step. The EMR cleanup removed around 66% of total lipids in the acetonitrile extract as profiled by UHPLC-QTOF-MS/MS. The innovative introduction of a reversed-phase C18 sorbent into the extract significantly improved the analytes' recovery during SpeedVac drying. The final accuracy achieved 80-120% for most analytes. Overall, this newly developed and validated method could serve as a powerful tool for analyzing RK and related phenolic compounds in fatty tissues.

In situ adsorbent formation based dispersive micro-solid phase extraction using a deep eutectic solvent as an elution solvent for the extraction of some pesticides from honey samples prior to GC-MS analysis

In this work, a simple, inexpensive, green, and fast dispersive micro-solid phase extraction method has been developed for the extraction of several pesticides from honey samples. In this approach, a solution of curcumin was prepared in ethanol and it was dispersed into a sample solution with the aid of a syringe. Curcumin was precipitated in the sample solution as tiny particles and the analytes were adsorbed onto them. After centrifugation the adsorbed analytes were eluted with tetrabutylammonium chloride:dichloroacetic acid deep eutectic solvent. The dissolved analytes in the deep eutectic solvent were analyzed by gas chromatography-mass spectrometry. Parameters affecting the extraction efficiency of the method including sorbent amount, dispersive solvent type and volume, elution solvent type and volume, salting out effect, and sonication time were investigated. Extraction recovery of the method was obtained in the range of 70-83%. Also wide calibration ranges and low detection limits (0.22-0.81 ng g^-1) were obtained. Relative standard deviation values for intra- and inter-day precisions were ≤10.2% for all analytes at a concentration of 5 ng g^-1 of each (n = 6). Finally, ten honey samples were analyzed and data showed that all of the studied samples were free of the analytes.

Application of polysaccharide biopolymers as natural adsorbent in sample preparation

Preparing samples for analyses is perhaps the most important part to analyses. The varied functional groups present on the surface of biopolymers bestow them appropriate adsorption properties. Properties like biocompatibility, biodegradability, presence of different surface functional group, high porosity, considerable absorption capacity for water, the potential for modification, etc. turn biopolymers to promising candidates for varied applications. In addition, one of the most important parts of determination of an analyte in a matrix is sample preparation step and the efficiency of this step in solid phase extraction methods is largely dependent on the type of adsorbent used. Due to the unique properties of biopolymers they are considered an appropriate choice for using as sorbent in sample preparation methods that use from a solid adsorbent. Many review articles have been published on the application of diverse adsorbents in sample preparation methods, however despite the numerous advantages of biopolymers mentioned; review articles in this field are very few. Thus, in this paper we review the reports in different areas of sample preparation that use polysaccharides-based biopolymers as sorbents for extraction and determination of diverse organic and inorganic analytes.

[Advances in solid-phase extraction for bisphenols in environmental samples]

Owing to the strict restrictions on the production and use of bisphenol A (BPA), bisphenol analogs (e. g., bisphenol S and bisphenol F) are gradually coming to use in many fields. BPA and these bisphenol analogs are so-called bisphenols (BPs). BPs as a class of endocrine disrupters are widely distributed in the environment (water, sediments, sludge, and aquatic products). BPs enter the human body through various routes, leading to endocrine disruption, cytotoxicity, genotoxicity, reproductive toxicity, dioxin-like effects, and neurotoxicity. The Canadian government has identified BPs as substances for further scoping/problem formulation. Because of the widespread attention paid to BPs in the environmental field, research is being expanded to cover water, sediment, dust, and biological samples, and other media. Given the significant differences in the complexity and pollution concentration of environmental samples, the development of pretreatment methods that afford high extraction efficiency, good purification selectivity, strong universality, operational simplicity, and high-throughput extraction and purification, are necessary to realize the highly sensitive detection of BPs in environmental media. In recent years, solid-phase extraction (SPE), accelerated solvent extraction (ASE), microwave-assisted extraction (MAE), and dispersion liquid-liquid-microextraction (DLLME) as new pretreatment technologies have gradually replaced the traditional liquid-liquid extraction and Soxhlet extraction. SPE has seen rapid development for the extraction and purification of BPs in various environmental samples, overcoming the bottlenecks related to time, energy, and solvent consumption in traditional methods while extending technical support for the analysis of emerging pollutants. The physicochemical properties, usage, and environmental hazards of typical BPs were briefly reviewed, with emphasis on the application of SPE products, development of new adsorbents, and transformation of the SPE mode. Commercialized SPE products are universally applicable in the field of environmental monitoring, while products suitable for the pretreatment of BPs are limited. The development of new adsorbents mainly focused on their adsorption capacity and selectivity. For example, ordered mesoporous silicon, carbon nanomaterials, metal-organic frameworks, and cyclodextrins have large surface areas, good adsorption performance, and regular pore structures, which improve the adsorption capacity of BPs. Molecularly imprinted polymers (MIPs) and mixed-mode ion-exchange polymers are mainly used to improve the selectivity of BPs in the purification process. In addition, MIPs have high chemical, mechanical, and thermal stabilities, which ensures their widespread application in the extraction, preconcentration, and separation of BPs. A variety of new SPE adsorbents can partially meet the diverse needs for detection. There is a consensus that the current challenges in analytical chemistry include the determination of contaminants at low concentration levels, but at the same time, more efficient and environment-friendly methodologies are required. With the introduction of high-sensitivity instruments in the market, the SPE model is seeing gradual development in terms of miniaturization, automation, and simplification. This in turn has minimized solvent consumption, analysis time, and labor cost, resulting in more efficient and affordable analytical methods such as QuEChERS, solid-phase microextraction (SPME), and magnetic solid-phase extraction (MSPE) to adapt to the new development scenario.

One step extraction followed by HPLC-ESI-MS/MS for multi-residue analysis of diacylhydrazine insecticides in water, sediment, and aquatic products

A multi-residue analysis of six diacylhydrazine insecticides in water, sediment, and aquatic products was established by liquid chromatography triple quadrupole tandem mass spectrometry (LC-MS/MS). The water sample was extracted with acetonitrile by low-temperature enrichment liquid-liquid extraction technology. The sediment and aquatic products were prepared using QuEChERS technique. Method validation showed perfect linearity with correlation coefficients (R) more than 0.9992 for all insecticides, and the matrix effects were nearly negligible (-1.42% to -0.27%) for water, sediment and aquatic products. The recoveries were 80.0-99.7% at three spiked levels (0.02 ng·mL^-1, 0.1 ng·mL^-1, 0.5 ng·mL^-1; 2.0, 10, and 50 ng·g^-1) and the precisions (intra-day and inter-day precision) were lower than 5.28%, with the low LODs (3.8 ~ 9.6 pg·mL^-1; 0.38-0.96 ng·g^-1) and LOQs (12.7 ~ 32.0 pg·mL^-1; 1.27-3.20 ng·g^-1) for water, sediment, and aquatic products, indicating the good accuracy and precision of the proposed method. The applicability, efficiency, and sensitivity of this method have been proved in the analysis of six diacylhydrazine insecticides in water, sediment, and crucian carp in Rice- crucian carp - integrated planting system.

High through-put determination of 28 veterinary antibiotic residues in swine wastewater by one-step dispersive solid phase extraction sample cleanup coupled with ultra-performance liquid chromatography-tandem mass spectrometry

We developed a QuEChERS (quick, easy, cheap, effective, rugged and safe) method for the high through-put determination of 28 common veterinary antibiotics in swine wastewater using one-step dispersive solid-phase extraction (d-SPE) for sample cleanup and ultra-performance liquid chromatography-tandem mass spectrometry for detection. The orthogonal test method was used to systematically investigate the parameters that might influence d-SPE efficiency. The optimal d-SPE procedure utilized 40 mg primary secondary amine sorbent and 3 g L^-1 Na₂EDTA. The recoveries ranged from 50 to 100% with relative standard deviations <20% for all target analytes except for enrofloxacin and chlortetracycline. The limits of detection and limits of quantification for all the analytes ranged from 0.002 to 0.200 ng mL^-1 and 0.005-0.500 ng mL^-1, respectively. The developed method was successfully applied to the analysis of 28 antibiotic residues in swine wastewater from 10 pig farms located in central China. Fourteen antibiotics including 4 sulfonamides (sulfadiazine, sulfamerazine, sulfamonomethoxine and trimethoprim), 5 fluoroquinolones (norfloxacin, ciprofloxacin, pefloxacin, enrofloxacin, and ofloxacin), 1 lincosamide (lincomycin) and 4 tetracyclines (doxycycline, tetracycline, oxytetracycline, and chlortetracycline) were detected at levels ranging from 0.0560 to 1793 ng mL^-1. Our results demonstrated that the optimized method is a simple but reliable analytical technique for the routine monitoring of veterinary antibiotics in swine wastewater. Swine wastewater samples that we analyzed from 10 pig farms in Jiangxi Province, China were highly contaminated and pose a serious threat to ecosystems and to public health.

Sample as solid support in MSPD: A new possibility for determination of pharmaceuticals, personal care and degradation products in sewage sludge

A method based on matrix-solid phase dispersion (MSPD), focused on the principles of green analytical chemistry, aimed at the use of alternative solid supports and less toxic solvents, was developed for the simultaneous determination of 19 pharmaceuticals, 4 personal care products (PPCPs) and 4 degradation products in sewage sludge samples. Higher recoveries were achieved when 2 g sample was macerated for 5 min in a glass mortar, transferred to a centrifuge tube, and 1 min vortex agitation with 5 mL methanol. The performance of the method was evaluated through linearity, recovery, precision (intra-day), method detection and quantification limits (MDL and MQL) and matrix effect. The calibration curves prepared in methanol and in the matrix extract showed a correlation coefficient ranging from 0.98 to 0.99. MQL values ranged from 1.25 to 1250 ng g^-1. Recoveries between 50 and 120% were reached with RSDs lower than 20% for most compounds. The method presented low and medium matrix effects for most analytes. This method was successfully applied to real samples and of the 27 compounds determined, amitriptyline, carbamazepine, diclofenac, haloperidol, ketoconazole, miconazole, albendazole, mebendazole, thiabendazole, triclosan and triclocarban were detected in concentrations between 2.5 and 5400 ng g^-1.

A review of the pharmaceutical exposome in aquatic fauna

Pharmaceuticals have been considered 'contaminants of emerging concern' for more than 20 years. In that time, many laboratory studies have sought to identify hazard and assess risk in the aquatic environment, whilst field studies have searched for targeted candidates and occurrence trends using advanced analytical techniques. However, a lack of a systematic approach to the detection and quantification of pharmaceuticals has provided a fragmented literature of serendipitous approaches. Evaluation of the extent of the risk for the plethora of human and veterinary pharmaceuticals available requires the reliable measurement of trace levels of contaminants across different environmental compartments (water, sediment, biota - of which biota has been largely neglected). The focus on pharmaceutical concentrations in surface waters and other exposure media have therefore limited both the characterisation of the exposome in aquatic wildlife and the understanding of cause and effect relationships. Here, we compile the current analytical approaches and available occurrence and accumulation data in biota to review the current state of research in the field. Our analysis provides evidence in support of the 'Matthew Effect' and raises critical questions about the use of targeted analyte lists for biomonitoring. We provide six recommendations to stimulate and improve future research avenues.

Multiresidue determination and predicted risk assessment of contaminants of emerging concern in marine sediments from the vicinities of submarine sewage outfalls

Submarine sewage outfalls (SSOs) are considered the main input source of contaminants of emerging concern continuously released in coastal areas, with the potential to cause adverse effects for aquatic organisms. This work presents the investigation of nine endocrine disrupting chemicals (EDCs) and 26 pharmaceutically active chemicals (PhACs) in marine sediments within the vicinities of 7 SSOs along the São Paulo State Coast (Brazil). Method optimization for the multi-residue determination by GC-MS/MS and LC-MS/MS using QuEChERS extraction/clean-up are discussed. Results demonstrate the occurrence of EDCs in concentrations ranging from less than method quantification limits (MQL) to 72.5 ng g^-1 in sediments. All PhACs were <MQLs. Nonylphenol was the most ubiquitous compound and the diversity of EDCs increased with an increase in populations serviced by SSOs. The predicted environmental risk assessment considering measured environmental concentrations and ecotoxicity endpoints from literature suggest a high-risk potential in some of the investigated SSOs.

Easy and fast extraction methods to determine organochlorine pesticides in sewage sludge, soil, and water samples based at low temperature

Organochlorine pesticides present in sewage sludge can contaminate soil and water when they are used as either fertilizer or agricultural soil conditioner. In this study, the technique solid-liquid extraction with low temperature purification was optimized and validated for determination of ten organochlorine pesticides in sewage sludge and soil samples. Liquid-liquid extraction with low temperature purification was also validated for the same compounds in water. Analyses were performed by gas chromatography-mass spectrometry operating in the selective ion monitoring mode. After optimization, the methods showed recoveries between 70% and 115% with relative standard deviation lower than 13% for all target analytes in the three matrices. The linearity was demonstrated in the range of 20 to 70 µg L^-1, 0.5 to 60 µg L^-1, and 3 to 13 µg L^-1, for sludge, soil, and acetonitrile, respectively. The limit of quantification ranged between 2 and 40 µg kg^-1, 1 and 6 µg kg^-1, and 0.5 µg L^-1 for sludge, soil, and water, respectively. The methods were used in the study of pesticide lixiviation carried out in a poly vinyl chlorine column filled with soil, which had its surface layer mixed with sludge. The results showed that pesticides are not leached into soil, part of them is adsorbed by the sewage sludge (4-40%), and most pesticides are lost by volatilization.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Evaluation of alternative environmentally friendly matrix solid phase dispersion solid supports for the simultaneous extraction of 15 pesticides of different chemical classes from drinking water treatment sludge

This study describes the development, optimization and validation of a method for the extraction of 15 pesticides of different chemical classes in drinking water treatment sludge (DWTS) by vortex-assisted Matrix Solid Phase Dispersion (MSPD) with determination by gas chromatography coupled to mass spectrometry. It focused on the application of alternative and different solid supports to the extraction step of the MSPD. The main parameters that influenced the extraction were studied in order to obtain better recovery responses. Recoveries ranged from 70 to 120% with RSD below 20% for all analytes. Limits of quantification (LOQ) of the method ranged from 5 to 500 μg kg^-1 whereas the analytical curves showed correlation coefficients above 0.997. The method under investigation used low volume of solvent (5 mL), low sample mass (1.5 g) and low mass of chitin (0.5 g), an environmentally friendly support. It has advantages, such as speed, simplicity and low cost material, over other methods. When the method was applied, 4 out of 15 pesticides were detected in the DWTS samples in concentrations below the LOQ.

Cold-induced aqueous acetonitrile phase separation: A salt-free way to begin quick, easy, cheap, effective, rugged, safe

Cooling a 1:1 (v/v) solution of acetonitrile and water at -16° C is known to result in two clear phases. We will refer to this event as "cold-induced aqueous acetonitrile phase separation (CIPS)". On a molar basis, acetonitrile is 71.7% and 13.6% in the upper and lower phases, respectively, in our study. The phase separation proceeds as a descending cloud of microdroplets. At the convenient temperature (typical freezer) employed here the lower phase is rather resistant to solidification, although it emerges from the freezer as a solid if various insoluble matter is present at the outset. In a preliminary way, we replaced the initial (salting-out) step of a representative QuEChERS procedure with CIPS, applying this modified procedure ("CIPS-QuEChERS") to a homogenate of salmon (and partly to beef). Three phases resulted, where only the upper, acetonitrile-rich phase is a liquid (that is completely clear). The middle phase comprises ice and precipitated lipids, while the lower phase is the residual matrix of undissolved salmon or meat. Treating the upper phase from salmon, after isolation, with anhydrous MgSO₄ and C18-Si (typical QuEChERS dispersive solid phase extraction sorbents), and injecting into a GC-MS in a nontargeted mode, gives two-fold more preliminary hits for chemicals, and also number of spiked pesticides recovered, relative to that from a comparable QuEChERS method. In part, this is because of much higher background signals in the latter case. Further study of CIPS-QuEChERS is encouraged, including taking advantage of other QuERChERS conditions.

Multiclass pesticide residue analysis in fish muscle and liver on one-step extraction-cleanup strategy coupled with liquid chromatography tandem mass spectrometry

The analysis of pesticide residues in fish samples is challenging due to the low concentrations and large number of analytes that need to be monitored and quantified in a complex matrix. This is the first report providing a novel one-step extraction-cleanup strategy for simultaneous analysis of over 340 pesticides in a fatty fish and liver matrix, coupled with liquid-chromatography tandem mass spectrometry. The samples of fish muscle and liver were prepared according to the modified QuEChERS (quick, easy, cheap, effective, rugged and safe) procedure, wherein the extraction and cleanup protocol were integrated into one step. Among the tested cleanup dispersive solid phase extraction sorbents (C18, primary-secondary amine, Z-Sep), chitin yielded the best results. Spike-in experiments were carried out at three different spiking levels in fish and liver to determine the recovery, precision and limits of detection of the method as well as the matrix effect. The method's detection limits ranged from 0.05 to 1.2μgkg^-1, while recoveries of most pesticides were in the range of 70-120% with associated precision - relative standard deviations below 20%. A linear relationship was observed within the range of 0.005-1mgkg^-1, and the correlation coefficient was R²>0.997. Expanded measurement uncertainty was estimated to be between 7% and 52%, on average. Matrix effects were evaluated and were not significant for the vast majority of pesticides. The validated method was employed in the analysis of 54 real fish and liver samples in which 10 different pesticides with concentrations ranging from 0.005 to 0.047mgkg^-1 were detected.

Evaluation of alternative sorbents for dispersive solid-phase extraction clean-up in the QuEChERS method for the determination of pesticide residues in rice by liquid chromatography with tandem mass spectrometry

Many compounds are used for pest control during the production and storage of rice, making it necessary to employ multiclass methods for pesticide residues determination. For this purpose, QuEChERS-based methods are very efficient, fast and accurate, and improvements in the clean-up step are important, especially for complex matrices, like cereals. In this work, different sorbents such as chitosan, florisil(®) , alumina, diatomaceous earth, graphitized carbon black, besides the commonly used primary secondary amine and octadecylsilane, were evaluated for dispersive solid-phase extraction clean-up in acetate-buffered QuEChERS method for the determination of residues of 20 representative pesticides and one metabolite in rice by liquid chromatography coupled to tandem mass spectrometry. The sorbent C18 presented the best results, however, chitosan showed similar results, and the best performance among the unconventional sorbents evaluated. The method limit of quantification, attending accuracy (70-120% recovery) and precision (RSD ≤20%) criteria, ranged from 5 to 20 μg/kg. Results showed that chitosan is an effective alternative to reduce analysis costs, maintaining the method reliability and accuracy.

A novel approach to bar adsorptive microextraction: Cork as extractor phase for determination of benzophenone, triclocarban and parabens in aqueous samples

This study describes the use of cork as a new coating for bar adsorptive microextraction (BAμE) and its application in determining benzophenone, triclocarban and parabens in aqueous samples by HPLC-DAD. In this study bars with 7.5 and 15 mm of length were used. The extraction and liquid desorption steps for BAμE were optimized employing multivariate and univariate procedures. The desorption time and solvent used for liquid desorption were optimized by univariate and multivariate studies, respectively. For the extraction step the sample pH was optimized by univariate experiments while the parameters extraction time and ionic strength were evaluated using the Doehlert design. The optimum extraction conditions were sample pH 5.5, NaCl concentration 25% and extraction time 90 min. Liquid desorption was carried out for 30 min with 250 μL (bar length of 15 mm) or 100 μL (bar length of 7.5 mm) of ACN:MeOH (50:50, v/v). The quantification limits varied between 1.6 and 20 μg L(-1) (bar length of 15 mm) and 0.64 and 8 μg L(-1) (bar length of 7.5 mm). The linear correlation coefficients were higher than 0.98 for both bars. The method with 7.5 mm bar length showed recovery values between 65 and 123%. The bar-to-bar reproducibility and the repeatability were lower than 13% (n = 2) and 14% (n = 3), respectively.

Study of vortex-assisted MSPD and LC-MS/MS using alternative solid supports for pharmaceutical extraction from marketed fish

A procedure based on vortex-assisted matrix solid-phase dispersion (MSPD) for the extraction of 15 pharmaceuticals from fish samples with determination by liquid chromatography-tandem mass spectrometry (LC-MS/MS) was validated. Florisil, C18, diatomaceous earth, chitin, and chitosan were evaluated as solid supports. Best results were obtained with 0.5 g of diatomaceous earth, 0.5 g of sodium sulfate, and 5 mL of methanol. Analytical recoveries ranged from 58 to 128 % with relative standard deviation (RSD) lower than 15 %. Limit of quantification (LOQ) values for the 15 compounds ranged from 5 to 1000 ng g(-1). The method under investigation has shown to be a simple and fast extraction tool with minimum instrumentation and low amount of reagent, resulting in method low cost. Besides, alternative materials, such as chitin and chitosan, which were applied to the dispersion step for the first time, were found to be interesting alternatives.

A review of recent developments and trends in the QuEChERS sample preparation approach

A comprehensive review is presented on the recent developments and trends in the QuEChERS (quick, easy, cheap, effective, rugged, and safe) sample preparation approach. This technique involves liquid-liquid partitioning using acetonitrile and purifying the extract using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS was introduced for pesticides residues analysis in high moisture fruits and vegetables, but more recently it is gaining significant popularity in the analysis of broad spectrum of analytes in huge variety of samples. The wide range of the technique applications is possible due to introducing various modifications based on the use of different extraction solvent and salt formulation and buffer additions for salting-out partitioning step and the application of various d-SPE sorbents for clean-up step. Therefore, the QuEChERS approach is useful for analysis of, among others pesticides, veterinary drugs and other pharmaceuticals, mycotoxins, polycyclic aromatic hydrocarbons (PAHs), dyes, acrylamide, synthetic musks and UV filters, bisphenols, polybrominated diphenyl ethers and other flame retardants, endocrine disruptors, and other chemical compounds. Thanks to the QuEChERS approach, high-throughput multiresidue methods operate in a routine contaminant control of food products, feedstuff, and environmental samples.

Just dip it: online coupling of “Dip-it” polymer monolith microextraction with plasma assisted laser desorption ionization mass spectrometry

Polymer monolith microextraction coupled to plasma assisted laser desorption ionization mass spectrometry for rapid and organic solvent-free trace analysis.

Evaluation of the QuEChERS method for the extraction of pharmaceuticals and personal care products from drinking-water treatment sludge with determination by UPLC-ESI-MS/MS

A modified version of the QuEChERS method has been evaluated for the determination of 21 pharmaceuticals and 6 personal care products (PPCPs) in drinking-water sludge samples by employing ultra high liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The performance of the method was evaluated through linearity, recovery, precision (intra-day), method detection and quantification limits (MDL and MQL) and matrix effect. The calibration curves prepared in acetonitrile and in the matrix extract showed a correlation coefficient ranging from 0.98 to 0.99. MQLs values were on the ng g(-1) order of magnitude for most compounds. Recoveries between 50% and 93% were reached with RSDs lower than 10% for most compounds. Matrix effect was almost absent with values lower than 16% for 93% of the compounds. By coupling a quick and simple extraction called QuEChERS with the UPLC-MS/MS analysis, a method that is both selective and sensitive was obtained. This methodology was successfully applied to real samples and caffeine and benzophenone-3 were detected in ng g(-1) levels.