Feasibility of corona discharge ion mobility spectrometry for direct analysis of samples extracted by dispersive liquid–liquid microextraction

Combination of online hollow fiber liquid phase microextraction with smartphone-based sensing for in situ formaldehyde assay in fabric and wastewater samples

A miniaturized analytical methodology was introduced based on the combination of a direct and online hollow fiber microextraction method with smartphone color detection. The method was used for the determination of formaldehyde (target analyte) in fabric and wastewater samples. In this regard, two reagents including ammonium acetate buffer and acetylacetone were added to the formaldehyde samples to create a colored compound. The colored compound was extracted from the sample by using the hollow fiber liquid-phase microextraction method, the extracted phase was not taken out of the extraction box and was directly transferred into a specially designed detection cell, and a smartphone was applied for in-situ color sensing and data readout. This combination gathered the advantages of both state-of-the-art microextraction techniques and smartphone sensing. Formaldehyde, as a carcinogenic compound widely used in paint and clothing industries, was selected as a model test. Factors affecting extraction efficiency were investigated and optimized, including the type of organic solvents, reagent concentration, salt, pH, stirring speed, reaction temperature, and extraction time. The linear region of the method under optimal conditions was 40-1500 µg L-1 for wastewater samples and 0.3-11.2 mg kg-1 for fabrics. The limit of detection and limit of qualification were 13 and 40 µg L-1, respectively. The relative standard deviations for concentrations of 100 and 1000 µg L-1 were 6% and 4%, respectively. To evaluate the application of the method for real samples, types of fabric and two samples of oil refinery wastewater were selected. The relative recovery in real samples was 84-98%. The results of the analytical parameters of the method show that the developed method can be used as an efficient method to determine formaldehyde in real samples.

Silica aerogel modified electrospun polyacrylonitrile as a sorbent for thin-film microextraction of chlorpyrifos from real samples coupled with corona discharge ion mobility spectrometry detection

In this paper, modified polyacrylonitrile/silica aerogel fibers were prepared and used as an adsorbent for thin-film microextraction of chlorpyrifos. The extracted analyte was analyzed by corona discharge ion mobility spectrometry. The electrospinning method was applied for the preparation of polyacrylonitrile fibers. The alkaline hydrolyzation technique was used to modify the electrospun film surface. Silica aerogel was synthesized on the surface of modified electrospun polyacrylonitrile fibers by the in situ growth technique. To access a high extraction yield, effective synthesis and extraction parameters such as NaOH concentration, reaction temperature and time, thin-film pretreatment, gelation time, solution pH, ionic strength, and extraction time were studied. The linearity range and the limit of detection of the method were 1-100 μg L^-1 and 0.3 μg L^-1, respectively. The precision of the method was 4 and 12% for the concentration levels of 5 and 60 μg L^-1, respectively. Chlorpyrifos was successfully determined by the method in well water, river water, agricultural wastewater, and tangerine samples.

Investigation of different alcoholic modifiers for the separation and determination of two isomers of dinitrotoluene (2,4 and 2,6) by ion mobility spectrometry

Some alcoholic modifier gases were applied to separate isomer peaks in ion mobility spectrometry (IMS). Different mechanisms have been investigated on the separation, such as collision cross-section and analyte-modifier cluster formation. In this regard, some parameters that affected the cluster formation, such as dipole moment, electron affinity, the position of functional groups, and the modifier structure, were evaluated. On the other hand, some effective experimental parameters, including cell temperature and the flow rates of the drift and modifier gases, were also optimized. The combination of dispersive liquid-liquid microextraction with thin-film evaporation (DLLME-TFE) was used as a sample preparation method for the extraction of 2,4-dinitrotoluene (2,4-DNT) and 2,6-dinitrotoluene (2,6-DNT) isomers (as the target analytes). Isobutanol was selected as the alcoholic modifier to separate the ion molecular peaks of these isomers. The limit of detection and the limit of quantification obtained were 15 and 50 μg L^-1 , and the linear dynamic range (50-700 μg L^-1 ) with coefficient of determination of 0.9941 and 0.9914 were obtained for 2,4-DNT and 2,6-DNT, respectively. The intra- and inter-day relative standard deviations were obtained between 3% and 5%. For validation of the method, determination of the isomers was accomplished for a red wastewater field sample, resulting in relative recovery values of about 96%.

In situ growth of copper-based metal-organic framework on a helical shape copper wire as a sorbent in stir-bar sorptive extraction of fenthion followed by corona discharge ion mobility spectrometry

In this paper, a helical copper wire, coated with copper-benzene-1,4-dicarboxylic acid metal-organic framework (Cu-BDC) was used as a sorbent for stir-bar sorptive extraction of fenthion from water and fruit samples. The homogenous coating was fabricated through two simple and fast steps. The chemical conversion of copper substrate to copper hydroxide nanotubes (Cu(OH)₂ NTs) was performed in an alkaline solution and then Cu-BDC was formed through a neutralization reaction. Corona discharge ion mobility spectrometry in positive mode was applied for the detection of fenthion. To improve the sensitivity of the method, some synthesis and extraction parameters affecting the extraction efficiency such as benzene-1,4-dicarboxylic acid concentration, ionic strength, sample pH, stirring rate, extraction temperature, and extraction time were investigated. The linear dynamic range between 0.5 and 80 μg L^-1 and detection limit of 0.1 μg L^-1 were obtained under optimal conditions. The intra- and inter-day relative standard deviations were less than 6.4 and 8.6%, respectively. The applicability of the method was examined for the analysis of different samples (i.e., well water, agricultural wastewater, and orange). The recovery for the determination of fenthion in spiked samples varied from 88 to 111%.

Centrifuge-free dispersive liquid-liquid microextraction coupled with thin-film microextraction for the preconcentration of molinate in real samples by ion mobility spectrometry

A tandem microextraction method, centrifuge free dispersive liquid-liquid microextraction and thin-film microextraction (DLLME-TFME), was used for analyzing molinate in environmental samples by ion mobility spectrometry (IMS). Considering the IMS as a competitive detection system, coupling these two popular sample preparation methods reduces the effect of solvent interference and improves the sensitivity of the technique. Trichloromethane and methanol were used as the extraction, and dispersive solvents for the DLLME method and electrospun polyacrylonitrile/copper-benzene-1,4-dicarboxylic acid fibers were used as a sorbent in the TFME method. Some effective experimental variables influencing the extraction efficiency of an analyte such as type and volume of dispersive and extraction solvents, solution pH, ionic strength, sonication time, and extraction time were studied. The linear dynamic range of 0.5-50 μg L^-1 and the limit of detection of 0.1 μg L^-1 were obtained under optimized conditions. The relative standard deviations for intra-and inter-day analysis were calculated less than 10%. The present method was used for the determination of molinate in different real samples such as agricultural wastewater, well water, river water, and apple, and the recovery was obtained between 82% and 113%, for the spiked samples.

Food safety and quality assessment: comprehensive review and recent trends in the applications of ion mobility spectrometry (IMS)

Ion mobility spectrometry (IMS) is an analytical separation and diagnostic technique that is simple and sensitive and a rapid response and low-priced technique for detecting trace levels of chemical compounds in different matrices. Chemical agents and environmental contaminants are successfully detected by IMS and have been recently considered to employ in food safety. In addition, IMS uses stand-alone or coupled analytical diagnostic tools with chromatographic and spectroscopic methods. Scientific publications show that IMS has been applied 21% in the pharmaceutical industry, 9% in environmental studies and 13% in quality control and food safety. Nevertheless, applications of IMS in food safety and quality analysis have not been adequately explored. This review presents the IMS-related analysis and focuses on the application of IMS in food safety and quality. This review presents the important topics including detection of traces of chemicals, rate of food spoilage and freshness, food adulteration and authenticity as well as natural toxins, pesticides, herbicides, fungicides, veterinary, and growth promoter drug residues. Further, persistent organic pollutants (POPs), acrylamide, polycyclic aromatic hydrocarbon (PAH), biogenic amines, nitrosamine, furfural, phenolic compounds, heavy metals, food packaging materials, melamine, and food additives were also examined for the first time. Therefore, it is logical to predict that the application of the IMS technique in food safety, food quality, and contaminant analysis will be impressively increased in the future. HighlightsCurrent status of IMS for residues and contaminant detection in food safety.To assess all the detected contaminants in food safety, for the first time.Identified IMS-related parameters and chemical compounds in food safety control.

Design of an ultrasonic piezoelectric injection port for analysis of thermally unstable compounds using corona discharge ion mobility spectrometry

This paper reports on a novel ultrasonic injection port designed and constructed to analyze thermally unstable chemical compounds using corona discharge ion mobility spectrometry (CD-IMS). In order to achieve the highest possible efficiency with the device, some parameters such as the solvent type, carrier gas flow rate and sample volume were exhaustively investigated. Through a comparative study conducted, it was revealed that unlike the thermal desorption system, the proposed ultrasonic injection port could easily be used for the analysis of some thermally unstable compounds such as carbaryl, propoxur and vitamin B₁, by means of CD-IMS. To evaluate the potential of the device, carbaryl, extracted from different samples by dispersive liquid-liquid microextraction technique, was quantitatively analyzed. The CD-IMS-based results brought forth the detection limit of 0.03 mg L^-1, and dynamic range of 0.1-10.0 mg L^-1 with the determination coefficient of 0.9981. The relative standard deviations for one day and three consecutive days were 4 and 6%, respectively. Further, the spiked samples of agricultural wastewater, underground water, and tomato analyzed culminated in the recovery values of 83%, 98% and 82%, respectively. The satisfactory results proved an acceptable capability of the sample introduction system, to be conveniently used for routine analysis of thermally unstable compound, without any tedious derivatization.

Trace analysis by ion mobility spectrometry: From conventional to smart sample preconcentration methods. A review

Ion mobility spectrometry (IMS) is a rapid and high sensitive technique widely used in security and forensic areas. However, a lack of selectivity is usually observed in the analysis of complex samples due to the scarce resolution of the technique. The literature concerning the use of conventional and novel smart materials in the pretreatment and preconcentration of samples previous to IMS determinations has been critically reviewed. The most relevant strategies to enhance selectivity and sensitivity of IMS determinations have been widely discussed, based in the use of smart materials, as immunosorbents, aptamers, molecularly imprinted polymers (MIPs), ionic liquids (ILs) and nanomaterial. The observed trend is focused on the development of IMS analytical methods in combination of selective sample treatments in order to achieve quick, reliable, sensitive, and selective methods for the analysis of complex samples such as biological fluids, food, or environmental samples.

Mitigation of solvent interference using a short packed column prior to ion mobility spectrometry

This paper introduces a novel approach to overcome the solvent interference in corona discharge-ion mobility spectrometry (CD-IMS) based on the time-resolved signals of the solvent and the analyte. To that end, a short Teflon tube was filled with a low amount of squalene or OV-1, which was prepared and located between the injection port and the entrance of the CD-IMS cell. Through this procedure, a sufficient delay (~5s) was obtained between the introduction of the solvent and the analyte into the reaction region of IMS. This resulted in removing the proton by solvent molecules, as well as increasing the effective collision during the analyte ionization, thereby providing an analysis with more sensitivity, accuracy, and precision. To show the column efficiency, ethion and diazinon (organophosphorus pesticides) were selected as the test compounds and their solutions were analyzed by the proposed method. The amount of sorbent, carrier gas flow rate, and the sorbent temperature affecting the sorbent efficiency were optimized by employing the response surface methodology and the central composite design. The proposed method was exhaustively validated in terms of sensitivity, linearity, and repeatability. In particular, the feasibility of direct injection was successfully verified by the satisfactory results, as compared with those achieved without the prior column. The methodology used in this study is very simple and inexpensive, which can overcome the solvent interference when a solution is directly injected into the CD-IMS.