Coextraction of acidic, basic and amphiprotic pollutants using multiwalled carbon nanotubes/magnetite nanoparticles@polypyrrole composite

Core-shell magnetic covalent organic polymer nanocomposites as an adsorbent for the extraction of flavonoids

A novel 3D magnetic nanocomposite material based on covalent organic polymers was successfully synthesized and utilized as an efficient sorbent for magnetic solid-phase extraction. It exhibited a regular core-shell structure, large specific surface area, superior stability, and paramagnetism. To evaluate its extraction efficiency, six flavonoids were tested, demonstrating maximum adsorption capacities ranging from 90 to 218 mg/g. Additionally, the material exhibited remarkable reusability and mechanical stability, maintaining its original state over eight cycles with consistent recovery. An analytical strategy combining magnetic solid-phase extraction with high performance liquid chromatography and tandem mass spectrometry was developed for the determination of flavonoids in orange, honey, soybean, and Dioscorea bulbifera L. samples. The low limits of detection (0.01-0.1 ng/mL) and limits of quantification (0.05-0.5 ng/mL), as well as satisfactory recovery (80.4-114.8%), were obtained. The linear range started from the limits of quantification to 500 ng/mL with R2 ≥ 0.9929. These results suggest that the prepared adsorbent possesses excellent adsorption capabilities for flavonoids, highlighting its significant potential for detecting these compounds in complex sample matrices.

Preparation of poly (methacrylic acid)/graphene oxide aerogel as solid-phase extraction adsorbent for extraction and determination of dopamine and tyrosine in urine of patients with depression

Dopamine (DA) and l-tyrosine (l-Tyr) are neurotransmitters involved in various neuropsychiatric disorders. Therefore, it is important to monitor their levels for diagnosis and treatment. In this study, we synthesized poly (methacrylic acid)/graphene oxide aerogels (p(MAA)/GOA) by in situ polymerization and freeze-drying using graphene oxide and methacrylic acid as substrates. Then, the p(MAA)/GOA were applied as solid-phase extraction adsorbents to extract DA and l-Tyr from urine samples, followed by quantification using high performance liquid chromatography (HPLC). The p(MAA)/GOA showed better adsorption performance for DA and l-Tyr than commercial adsorbents, likely as a result of the strong adsorption of the target analytes via π-π and hydrogen bonding interactions. Further, the developed method had good linearity (r > 0.9990) at concentrations of DA and l-Tyr of 0.075-2.0 and 0.75-20.0 μg mL^-1, respectively, as well as a limit of detection of 0.018-0.048 μg mL^-1, limit of quantitation of 0.059-0.161 μg mL^-1, spiked recovery of 91.1-104.0%, and interday precision of 3.58-7.30%.The method was successfully applied to determine DA and l-Tyr in the urine samples of patients suffering from depression, demonstrating its potential for clinical applications.

Polyaniline-co-polyindole functionalized magnetic porous carbon derived from MIL-53(Fe) for separation/enrichment of nitrophenols pollutants before determination with high-performance liquid chromatography-ultraviolet detection

Herein, a novel polyaniline-co-polyindole functionalized magnetic porous carbon derived from MIL-53(Fe) was prepared and employed as an excellent nano-adsorbent to preconcentrate trace amounts of nitro-phenols in water and wastewater samples. Briefly, magnetic MIL-53(Fe) was synthesized by the addition of magnetite nanoparticles, terephthalic acid, and FeCl3 to the reaction medium. The magnetic MIL-53(Fe) was pyrolyzed under nitrogen protection to obtain a magnetic porous carbon nanocomposite, and finally, the nanomaterial was functionalized with polyaniline-co-polyindole via oxidation polymerization. The obtained nano-adsorbent was characterized via X-ray diffraction, Fourier-transform infrared spectroscopy, vibrating sample magnetometry, and transmission and scanning electron microscopies. After that, the fabricated nano-material was utilized as an excellent nano-adsorbent for the preconcentration of trace nitro-phenols (2-nitrophenol, 4-nitrophenol, and 2,4-dinitrophenol) in environmental water, and wastewater samples. The detection limits were obtained from 0.1 to 0.15 μg/L after performing the optimization process. The new method was in the range of 0.4-300 μg/L. The proposed method exhibited a good precision from 3.2% to 9.6% for within-day assay, and 5.2%-13.2% for between-day assay at three concentration levels (1, 50, and 250 μg/L). Eventually, this method was utilized to preconcentrate/determine the target analytes in three water, and wastewater samples, satisfactory (relative standard deviations, 5.4%-9.3%; relative recovery, 88%-109%).

Use of polypyrrole ferrite microparticles and liquid chromatography-mass spectrometry for testing natural grass contamination by multiclass mycotoxins

An analytical methodology based on the combination of dispersive magnetic solid-phase extraction (DMSPE) and liquid chromatography-mass spectrometry (LC-MS) is proposed to explore the occurrence of 13 mycotoxins (aflatoxins B₁, G₁, B₂, and G₂; deoxynivalenol; T-2 toxin; ochratoxin A; HT-2 toxin; enniatins A, A₁, B, and B₂; and beauvericin) and their derivatives in natural grass samples. Magnetic microparticles (Fe₃O₄) coated with polypyrrole (PPy) polymer were used in DMSPE sample treatment as adsorbent phase, and Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy have been used for its characterization. The experimental parameters influencing the adsorption and desorption steps of DMSPE have been optimized. Method validation has been carried out obtaining limits of quantification between 0.07 and 92 μg kg^-1 corresponding to enniatin B or A₁ and DON, respectively. A total of 83 natural grass samples from 8 dehesa farms were analysed. Enniatin B was found in all the samples (0.29 to 488 μg kg^-1 concentration range) followed by enniatin B₁ (92.8% of the samples) with a 0.12-137 μg kg^-1 concentration range. Moreover, co-occurrence of mycotoxins was studied and between 2 and 5 mycotoxins appeared simultaneously in 97.6% of the samples. Distribution of the contamination according to natural grass location was also investigated.

Dispersive Magnetic Solid-Phase Extraction as a Novelty Sample Treatment for the Determination of the Main Aflatoxins in Paprika

Dispersive magnetic solid-phase extraction (DMSPE) technique is proposed as a new sensitive and effective sample treatment method for the determination of aflatoxins in paprika samples. DMSPE was followed by ultrahigh-performance liquid chromatography and high-resolution mass spectrometry detection (UHPLC-HRMS) using a non-targeted acquisition mode for the detection of main aflatoxins (aflatoxin G1, G2, B1 and B2) and derivatives. DMSPE was based on the use of magnetic nanocomposite coated with polypyrrole (PPy) polymer and the main experimental parameters influencing the extraction efficiency in adsorption and desorption steps have been studied and optimized. Analyses were performed using 250 µL magnetic PPy nanocomposite into the sample solution, adsorbing the analytes in 30 min and desorbing them with ethyl acetate (2 mL) in 15 min. The method has been validated, obtaining quantification limits between 3.5 and 4.7 µg kg-1 and recoveries between 89.5-97.7%. The high recovery rate, wide detection range and the use for the first time of the reusable Fe3O4@PPy nanomaterial in suspension for solid food matrices, guarantee the usefulness of the method developed for adequate control of aflatoxins levels in paprika. The proposed methodology was applied for the analysis of 31 samples (conventional and organic) revealing the absence of aflatoxins in the samples.

Dispersive magnetic solid-phase extraction for capsaicinoid compounds in human serum using LC-HRMS: targeted and non-targeted approaches

A new analytical method based on the use of dispersive magnetic solid-phase extraction (DMSPE) is described for the preconcentration of capsaicin (CAP), dihydrocapsaicin (DCAP), and N-vanillylnonanamide (PCAP) from human serum samples. The influence of several experimental factors affecting the adsorption (nature and amount of magnetic material, adsorption time, and pH) and desorption (nature of solvent, its volume and desorption time) steps was studied. Among seven different nanomaterials studied, the best results were obtained using magnetic multiwalled carbon nanotubes, which were characterized by means of spectrometry- and microscopy-based techniques. Analyses were performed by ultra-high-performance liquid chromatography with quadrupole-time-of-flight mass spectrometry using electrospray ionization in positive mode (UHPLC-ESI-Q-TOF-MS). The developed method was validated by obtaining several parameters, including linearity (0.3-300 μg L^-1 range), and limits of detection which were 0.1, 0.15, and 0.17 μg L^-1 for CAP, DCAP, and PCAP, respectively. The repeatability of the method, expressed as relative standard deviation (RSD, n = 7), varied from 3.4 to 11%. The serum samples were also studied through a non-targeted approach in a search for capsaicinoid metabolites and related compounds. With this objective, the fragmentation pathway of this family of compounds was initially studied and a strategy was established for the identification of novel or less studied capsaicinoid-derived compounds.

Vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction of ketoprofen and naproxen from environmental water before chromatographic analysis: response surface methodology optimisation

A microextraction procedure that is rapid and simple to extract and preconcentrate ketoprofen and naproxen is proposed. An environmentally friendly supramolecular solvent was applied as an extraction solvent and proved to be efficient in the extraction of ketoprofen and naproxen from environmental water. The design of experiment approach was used to screen, optimize significant parameters, and determine optimum experimental conditions. Under optimized experimental conditions, the vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction provided a good linearity (0.57–700 µg L−1), low limits of detection (0.17–0.24 µg L−1) and extraction reproducibility below 9%. The high percentage relative recoveries (93.6–101.4%) indicated that the method is not affected by matrix. The practical applicability of the method was assessed by analysing ketoprofen and naproxen in river water and effluent wastewater samples. Both analytes were found in effluent wastewater.

A novel poly(2-mercaptobenzothiazole) coated magnetic nanoadsorbent derived from ZIF-8 for preconcentration/determination of palladium and silver

Herein, a novel poly(2-mercaptobenzothiazole) coated magnetic nanoadsorbent derived from zeolitic-imidazole framework-8 (ZIF-8) was synthesized and then employed for the extraction/preconcentration of trace amounts of palladium and silver in various real matrixes. In this way, magnetite was fabricated first, and then functionalized with tetraethyl orthosilicate. After that, the synthesized magnetite@silica was coated with the ZIF-8 to obtain magnetic ZIF-8. Afterward, the magnetic ZIF-8 was pyrolyzed under the protection of a nitrogen atmosphere to get a magnetic carbon nanoadsorbent. Finally, the magnetic carbon was functionalized with a conductive polymer (poly-2-mercaptobenzothiazole). Fabrication of the nanoadsorbent was affirmed with scanning and transmission electron microscopies, elemental analysis, X-ray diffraction, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The method is linear from 0.25 to 200 μg L^-1 for silver, and from 0.5 to 250 μg L^-1 for palladium. The detection limits are 0.07 and 0.15 μg L^-1 for Ag and Pd, respectively. The precision was evaluated at three concentration levels (1, 75, 200 μg L^-1, n = 5) and all the relative standard deviation (RSD) values were lower than 10.3%. In the end, the new method was utilized for the preconcentration/determination of trace amounts of palladium and silver in various real matrixes, satisfactorily (relative recovery: 86% to 104%; RSD%: 4.0-9.5%).

Simultaneous detection of eight phenols in food contact materials after electrochemical assistance solid-phase microextraction based on amino functionalized carbon nanotube/polypyrrole composite

An electrochemical assistance solid-phase microextraction (EA-SPME) was developed based on amino functionalized multi-walled carbon nanotube/polypyrrole (MWCNTs-NH₂/PPy) composite coating. It was applied for the extraction of eight phenols in food contact material, including 2-chlorophenol, o-cresol, m-cresol, 2,4-dichlorophenol, 4-tert-butylphenol, 4-chlorophenol, 4-tertoctylphenol and alpha-naphthol. MWCNTs-NH₂/PPy coating was characterized by scanning electron microscopy, transmission electron microscope, X-ray energy spectrometer, X-ray diffraction, Fourier transform infrared and thermogravimetric analysis. The adsorption mechanism of phenols on the composite coatings was investigated. The coating modified steel-wire as an extraction fiber has good electroconductibility, reproducibility and long service life. A determination method for the eight phenols was established by EA-SPME coupled with gas chromatography-flame ionization detection. Under the optimal experimental conditions (extraction temperature: 40 °C; extraction time: 30 min; stirring rate: 600 rpm; NaCl concentration: 0.15 g mL^-1; desorption temperature: 250 °C and desorption time: 4 min), the detection linear range was 0.005-50 μg L^-1 (R²>0.99), and the detection limit was 0.001-0.1 μg L^-1 (S/N = 3). For the quintuple analysis of 50 μg L^-1 phenols, the single fiber RSDs were 2.2-12.4%, and the fiber-to-fiber RSDs were 1.9-10.5%. The method was used to detect the migration quantity of the eight phenols from five canned packaging materials, which showed satisfactory recovery 87.3-118.9%.

Magnetic porous carbon nanocomposite derived from cobalt based-metal-organic framework for extraction and determination of homo and hetero-polycyclic aromatic hydrocarbons

Herein, a novel magnetic porous carbon nanocomposite derived from a cobalt based-metal-organic framework was synthesized and evaluated for simultaneous preconcentration of homo and hetero-polycyclic aromatic hydrocarbons. Briefly, magnetite nanoparticles (MNPs) were synthesized and then were coated with a metal-organic framework layer. Finally, the magnetic nanocomposite was carbonized under an inert atmosphere to obtain the magnetic porous carbon (MPC). Various characterization techniques such as FT-IR spectroscopy, transmission and scanning electron microcopies, vibrating sample magnetometry, and X-ray diffraction were employed. Applicability of the MPC was explored using benzothiophene, dibenzothiophene, 9,10-dimethylanthracene, and benz[α]anthracene as the model analytes. Limits of detection and linearities were achieved in the range of 0.06-0.18 μg L^-1 and 0.25-500 μg L^-1, respectively. Precision of the method as RSDs was evaluated which was in the range of 4.2-7.0% (within-day, n = 5) and 8.2-11.3% (between-day, n = 3). Ultimately, the method was applied to analyze two seawater samples and satisfactory results (RSDs%, 5.0-9.0%; relative recoveries, 89-104%) were obtained.

Fabrication of a novel magnetic metal-organic framework functionalized with 2-aminothiophenol for preconcentration of trace silver amounts in water and wastewater

Herein, a novel magnetic metal-organic framework functionalized (MMOF) with 2-aminothiophenol (2-ATP) was fabricated and employed for separation/preconcentration of trace silver amounts. At first magnetite nanoparticles (Fe3O4 NPs) were synthesized and then coated with SiO2. Thereafter, the Fe3O4@SiO2 nanoparticles were modified with 2-ATP. Finally, the functionalized MMOF was prepared by the fabrication of MIL-101(Cr) in the presence of Fe3O4@SiO2@2-ATP NPs. MIL-101(Cr)/Fe3O4@SiO2@2-ATP nanocomposite was characterized with FT-IR, SEM, elemental analysis, XRD and VSM and then utilized in the separation/determination of silver ions in various real samples. The effects of diverse experimental variables such as pH, uptake time, adsorbent amount, desorption time, eluent concentration and volume were studied comprehensively employing experimental design methodology. After optimization, LOD and linearity were 0.05 ng mL-1 and 0.2-200 ng mL-1, respectively. Repeatability of the new method was determined based on RSD value for 5, 50, 150 ng mL-1 (n = 5) concentrations which was 9.3%, 6.8% and 4.5%, respectively. Ultimately, the outlined method was utilized in the separation/determination of silver ions in various water and wastewater samples satisfactorily.

Cellulose-ferrite nanocomposite for monitoring enniatins and beauvericins in paprika by liquid chromatography and high-resolution mass spectrometry

Paprika is considered a high-quality product being one of the most consumed spices in the world. Contamination with mycotoxins may appear due to inappropriate practices during processing or resulting from invading mould in the final manufactured products. A sample treatment based on dispersive magnetic solid-phase extraction (DMSPE) has been proposed for emerging mycotoxin determination, enniatins (ENNs) and beauvericins (BEAs), in paprika. Different magnetic nanoparticles were tested, and cellulose-ferrite nanocomposite was selected for the extraction and preconcentration of the mycotoxins. Nanocomposite was characterised using field emission scanning electron microscopy and energy dispersive X-ray spectroscopy in terms of morphology and elemental composition. High-resolution mass spectrometry allowed the quantification of the five main emerging mycotoxins and the monitoring of unexpected members of this class of toxic fungal secondary metabolites. The method has been validated, obtaining limits of quantification between 9.5 and 9.9 μg kg^-1 and testing its trueness through recovery studies, with satisfactory values of between 89.5 and 97.7%. Relative standard deviations were calculated to evaluate the intra- and inter-day precision and values lower than 8% were obtained in all cases. The analysis of 26 samples, including conventional and organic, demonstrated the presence of ENNB1 at 12.0 ± 0.6 μg kg^-1 in one of the samples studied. Other analogues ENNs and BEAs were not detected.

3D flower-liked Fe3O4/C for highly sensitive magnetic dispersive solid-phase extraction of four trace non-steroidal anti-inflammatory drugs

A low cost-effective and simple synthesis method was adopted to acquire three-dimensional flower-like structure Fe₃O₄/C that has large specific area, suitable pore structure and sufficient saturation magnetism. The obtained Fe₃O₄/C exhibits outstanding preconcentration ability and was applied to extracting non-steroidal anti-inflammatory drugs from complex environmental and biological samples. The parameters of magnetic solid-phase extraction were optimized by univariate and multivariate methods (Box-Behnken design). The high degree of linearity from 2.5 to 1000.0 ng mL^-1 (R² ≥ 0.9976), the limits of detection from 0.25 to 0.5 ng mL^{- 1} (S/N = 3), and the limits of quantitation from 1.0 to 2.0 ng mL^{- 1} (S/N = 10) were yielded by adopting this novel method after the optimization. Moreover, the recoveries of non-steroidal anti-inflammatory drugs from 89.6 to 107.0% were acquired in spiked plasma, urine and lake samples. In addition, the adsorption of non-steroidal anti-inflammatory drugs on Fe₃O₄/C was explored by adsorption isotherms and kinetic studies. Furthermore, the adsorption mechanism for non-steroidal anti-inflammatory drugs by Fe₃O₄/C was proposed, which was hydrogen bonding and π-π interaction between non-steroidal anti-inflammatory drugs and Fe₃O₄/C. Graphical abstract.

On-site sample preparation of trace aromatic amines in environmental waters with monolith-based multichannel in-tip microextraction apparatus followed by HPLC determination

A novel on-site preparation strategy for the determination of trace aromatic amines (AAs) in environmental waters was developed in the present study. To extract AAs effectively, 4-vinylbenzoic acid was copolymerized with ethylene dimethacrylate (ED)/divinylbenzene (DVB) in a pipette tip to obtain a new monolith-based adsorbent (MBA). The MBAs were employed as the extraction phases of home-made multichannel in-tip microextraction apparatus (ITMA) which was used to perform field sample preparation of AAs in different water samples followed by HPLC/DAD analysis. Due to the abundant functional groups, the prepared MBA displayed satisfying extraction performance for studied AAs. Under the optimized conditions, limits of detection varied from 2.1 to 26 ng/L with good coefficients of determination and precision. The recoveries for real water samples with different fortified concentrations were in the range of 78.1-119%, and the RSD values varied from 0.85 to 11%. In addition, the results achieved with the introduced method were well comparable to that obtained with conventional laboratory sample pretreatment process. Compared with existing approaches, the proposed method exhibits some merits such as s high throughput, good sensitivity and eco-friendliness. Most of important, the MBA/ITMA for on-site preparation avoids the storage and transportation of large volumes of waters, and guarantees the analytical accuracy of studied AAs.

Applications of surface functionalized Fe3O4 NPs-based detection methods in food safety

Food safety has always been an issue of great concern to people. The development of rapid, sensitive and specific detection technology of food pollutants is one of the hot issues in food science field. The rapid development of functionalized Fe₃O₄ nanoparticles (NPs) provides unprecedented opportunities and technical support for the innovation of food safety detection. The surface functionalized Fe₃O₄ NPs, which combine superparamagnetic with nanoscale feature, have become an excellent tool for food quality and safety detection. This review highlights the mechanism, principles, and applications of surface functionalized Fe₃O₄ NPs-based detection technique in the agrifood industry. Then the relevant characteristics, functional roles and general mechanisms of nanomaterial-based detection of various endogenous components and exogenous pollutants in foods are discussed in detail. Ultimately, this review is expected to promote the optimization of functionalized Fe₃O₄ NPs and provide direction for the diversity of signal recognition and the sustainability of detection methods.

Amine-functionalized magnetic activated carbon as an adsorbent for preconcentration and determination of acidic drugs in environmental water samples using HPLC-DAD

In the present study, a convenient and highly effective method was developed for the quantification of acidic drugs in wastewater and river water samples. Ultrasonic-assisted magnetic solid phase extraction employing magnetic waste tyre-based activated carbon nanocomposite functionalized with [3-(2-aminoethylamino)propyl]trimethoxysilane as a cost-effective and efficient adsorbent was used for the extraction and preconcentration of acidic drugs (naproxen [NAP], ketoprofen (KET) and diclofenac [DIC]). The quantification of target analytes was achieved by high‐performance liquid chromatography with diode array detector. Under optimum conditions, the detection limit, quantification limit and relative standard deviation obtained for the analytes of interest ranged from 0.38 to 0.76, 1.26 to 2.54 µg L−1 and 2.02 to 4.06%, respectively. The applicability of the developed method was assessed by the spike recovery tests and the relative recoveries proved that the method is reliable for the determination of acidic drugs in wastewater. Thereafter, the method was applied successfully for the determination of NAP, KET and DIC in river water, influent and effluent wastewater.

Deep eutectic solvent-based magnetic colloidal gel assisted magnetic solid-phase extraction: A simple and rapid method for the determination of sex hormones in cosmetic skin care toners

A simple rapid and efficient deep eutectic solvent-based magnetic colloidal gel (DES-MCG) assisted magnetic solid-phase extraction (MSPE) method followed by high performance liquid chromatography with a diode array detector (HPLC-DAD) was established for determination of four sex hormones (including ethinylestradiol, norgestrel, megestrol acetate and medroxyprogesterone acetate) in cosmetic skin care toners. The DES-MCG with the desirable advantages of high adsorbing ability was prepared by combining choline chloride/urea deep eutectic solvent and magnetic multiwalled carbon nanotubes (MMWCNTs). The synthesized DES-MCG was characterized using fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometry (VSM). The cosmetic skin care toners were concentrated by a rotary evaporator and the obtained solutions were further purified by DES-MCG assisted magnetic solid-phase extraction. Response surface methodology (RSM) was applied for efficient optimization of the main variables in the extraction procedure. Under the optimized conditions, method detection limits and method quantitation limits were in the range of 1.2-6.6 ng mL^-1 and 4.4-26.6 ng mL^-1, respectively. The recoveries of the four sex hormones in different cosmetic skin care toners ranged from 80.1% to 118.8% and the precisions were no more than 0.35%. The developed method was successfully applied for the determination of sex hormones in cosmetic skin care toners.

Alginate-based hydrogels modified with olive pomace and lignin to removal organic pollutants from aqueous solutions

In this study, new hybrid biopolymers based on alginate and low cost materials belong lignocellulose group such as lignin and olive pomace were used to removal organic pollutants. The organic carbon content, granule size, average mass, zero charge point, water uptake and swelling of the resulting alginate-based modified adsorbents were measured. The homogeneity, complexity and encapsulation viability of the novel biopolymers were studied by FT-IR, TGA and SEM. As model of emerging contaminants belong to glucocorticoids group prednisolone drug was selected. 3,4-dichloroaniline (3,4-DCA) was chosen as aniline derivate pollutant. The efficiency of the bioadsorbents to removal 3,4-dichloroaniline and prednisolone was performed by kinetic and equilibrium batch adsorption studies. The experimental data was found well correlated to the pseudo-second order kinetic model. The adsorption of 3,4-DCA and prednisolone was mainly affected by the organic carbon content of the bioadsorbent. A higher adsorption capacity was observed for lignin-alginate based bioadsorbents. The removal efficiency was higher than 90% for 3,4-DCA in all prepared bioadsorbents, reached up to 49% for prednisolone using the bioadsorbent with the higher lignin content. These results suggest the promising potential for the prepared eco-friendly bioadsorbents to removal organic pollutants from water, mainly for aniline derivate such as 3,4-DCA.

Polyamine-Modified Magnetic Graphene Oxide Nanocomposites and HPLC-MS/MS Allow the Determination of Two Indolic Derivatives in Strong-Aroma Types of Base Baijiu

Simultaneous detection of 3-indoleacetic acid (IAA) and 3-indolepropionic acid (IPA) in strong-aroma types of base Baijiu (base SAB) is crucial for elucidating the metabolic pathway of 3-methylindole during the base SAB brewing. Herein, a novel magnetic poly(allylamine)-modified graphene oxide (GO@PAA@Fe₃O₄) was synthesized as extraction sorbent, followed by high performance liquid chromatography mass spectrometry HPLC-MS/MS. As a surface modifier of GO, the introduction of PAA and Fe₃O₄ provided more adsorption sites for IAA and IPA, mainly through the generation of H-bonding sites. Moreover, modified by an activation step, the capacity of the activated GO@PAA@Fe₃O₄ for the adsorption of IAA and IPA was 2.1-3.4 times higher than that of unactivated material. The adsorptions of IAA and IPA on GO@PAA@Fe₃O₄ were fitted to the pseudo-second-order kinetic model and Langmuir isotherm, respectively. Under the optimal conditions, IAA and IPA were determined in 16-base SAB for the first time, and their concentrations ranged from 0.6 to 11.3 and 0.7 to 18.7 μg/L, respectively.

Dispersive Solid-Phase Extraction using Magnetic Carbon Nanotube Composite for the Determination of Emergent Mycotoxins in Urine Samples

Dispersive magnetic solid-phase extraction (DMSPE) has received growing attention for sample treatment preconcentration prior to the separation of analytes due to its many advantages. In the present work, the potential of DMSPE for the determination of emergent mycotoxins (enniatins A, A1, B and B1, and beauvericin) is investigated for the first time. Different magnetic nanoparticles were tested and a magnetic multiwalled carbon nanotube (Fe3O4@MWCNT) composite was selected for the extraction and preconcentration of the five target mycotoxins in human urine samples before their analysis by ultrahigh performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS). The nanocomposite was characterized by energy dispersive X-ray spectrometry, scanning electron microscopy, Fourier transform infrared spectrophotometry, and X-ray diffraction. Several parameters affecting the adsorption and desorption of DMSPE steps were optimized and the method was fully validated. Due to a matrix effect, matrix-matched calibration curves were necessary to carry out quantification. In this way, limits of quantification of between 0.04 and 0.1 μg/L, relative standard deviation values lower than 12% and recoveries between 89.3% and 98.9% were obtained. Finally, a study of the reuse of the Fe3O4@MWCNT composite was carried out, confirming that it can be reused at least four times.

A nanosized magnetic metal-organic framework of type MIL-53(Fe) as an efficient sorbent for coextraction of phenols and anilines prior to their quantitation by HPLC

The authors describe the synthesis of a magnetic metal-organic framework (MOF) of type MIL-53(Fe) for coextraction of phenols and anilines from various environmental samples. A quick method for dispersive micro-solid phase extraction (D-μ-SPE) was developed for coextraction of the analytes 4-nitrophenol (4-NP), 4-chlorophenol (4-CP), 4-chloroaniline (4-CA), 1-amino-2-naphtol (1-A2N) and 2, 4-dichloroaniline (2, 4-DCA). The MOF was characterized by SEM, TEM, FT-IR, EDS, thermogravimetry, VSM and XRD. The method was optimized by response surface methodology combined with desirability function approach, specifically with respect to pH value of the sample, amount of sorbent, sorption time, salt concentration, sample volume, type and volume of the eluent, and elution time. Following elution with acetonitrile, the analytes were quantified by HPLC with photodiode array detection. Responses are linear in 0.1-2000 μg·L^-1 concentration ranges. The limits of detection and relative standard deviations (for n = 5) are in the range of 0.03-0.2 μg·L^-1 and 3.5-12.6%, respectively. Enrichment factors are 113, 61, 87, 144 and 114 for 4-NP, 4-CP, 4-CA, 1-A2N and 2,4-DCA, respectively. Recoveries from spiked samples ranged from 39.5 to 93.3%. The magnetic sorbent was successfully applied to the coextraction and determination of the analytes in river, rain and hookah water samples. Graphical abstract Schematic presentation for the synthesis of (a) Fe₃O₄ nanoparticles (NPs) and (b) Fe₃O₄@MIL-53(Fe). Fe₃O₄@MIL-53(Fe) was employed as a new nanosorbent in dispersive micro-solid phase extraction of phenols and anilines. The limits of detection are in the range of 0.03-0.2 μg·L^-1.

Polypyrrole-modified magnetic multi-walled carbon nanotube-based magnetic solid-phase extraction combined with dispersive liquid–liquid microextraction followed by UHPLC-MS/MS for the analysis of sulfonamides in environmental water samples

Polypyrrole modified magnetic multi-walled carbon nanotubes were prepared and applied as an efficient adsorbent for magnetic solid-phase extraction.

Trace amount determination of Cd(ii), Pb(ii) and Ni(ii) ions in agricultural and seafood samples after magnetic solid phase extraction by MIL-101(Cr)/phenylthiosemicarbazide-functionalized magnetite nanoparticle composite

Herein, a novel nanosorbent consisting of phenylthiosemicarbazide magnetite nanoparticles and MIL-101(Cr) was synthesized, characterized and utilized to magnetic solid phase extraction of some heavy metals in various agricultural and seafood samples.