A polythiophene–silver nanocomposite for headspace needle trap extraction

Incorporation of Cu-TATAB metal-organic framework within polyurethane nanocomposite for enhanced thin film microextraction of some chlorinated pesticides

In this research, electrospun nanofibers based on copper-based metal organic framework (MOF)/polyurethane (PU) were prepared in order to achieve an applicable and superior extractive phase. The incorporation of MOF, in the synthesized nanocomposite contributed to the enhanced sorption efficiency. The prepared sorbent was implemented for the thin film microextraction (TFME) of target compounds with subsequent quantification using gas chromatography-mass spectrometry (GC-MS). To obtain the maximum efficiency of the synthesized sorbent, the influential parameters on extraction and desorption steps, including the MOF percentage in nanocomposite, desorption solvent type and its volume, desorption time, solution ionic strength and extraction time were optimized. After method development, the linear dynamic range (0.02-700 μg L-1), limits of detection (LODs) (0.005-0.1 μg L-1) and limits of quantification (LOQs))0.02-0.33 μg L-1(were calculated. The relative standard deviations values for intra-day and inter-day analysis were found to be in the range of 4.3-5.3 % and 6.2-8.1 %, respectively. The developed method was validated for the TFME of model organochlorine (OC) pesticide residues in fish, soil and water samples. the recovery values for the spiked samples at two concentration levels of 5 and 100 µg l-1 were found in the range of 72-110 %.

Needle trap device technique: From fabrication to sampling

Needle Trap Device (NTD) as a novel, versatile, and eco-friendly technique has played an important role in analytical and environmental chemistry. The distinctive role of this interdisciplinary technique can be defended through the sampling and analysis of biological samples and industrial pollutants in gaseous and liquid environments. In recent years, significant efforts have been made to enhance the performance of the needle trap device resulting in the development of novel extraction routes by various packing materials with improved selectivity and enhanced adsorption characteristics. These achievements can lead to the facilitated pre-concentration of desired analytes. This review tries to have a comparative and comprehensive survey of the three important areas of NTD technique: I) Fabrication and preparation procedures of NTDs; II) Sampling techniques of pollutants using NTDs; and III) Employed materials as adsorbents in NTDs. In the packing-material section, the commercial and synthetic adsorbents such as carbon materials, metal-organic frameworks, aerogel, and polymers are considered. Furthermore, the limitations and potential areas for future development of the NTD technique are presented.

Polybutylene succinate/modified cellulose bionanocomposites as sorbent for needle trap microextraction

In this work, different polybutylene succinate/modified cellulose bio-nanocomposites were synthesized by solving the casting method and then used as a new sorbent for needle trap microextraction of some polycyclic aromatic hydrocarbons from the water samples in headspace mode. The surface of cellulose nanocrystalline was modified using aminosilane groups to improve the dispersion of nanoparticles in the polybutylene succinate matrix. The characterization of synthesized nanocomposites, were performed using TGA, SEM, BET analysis and FT-IR spectroscopy. Adding modified nanocrystalline cellulose to a polybutylene succinate matrix increased the surface area, and thermal and mechanical stabilities. The significant parameters of the sorbent extraction process, including the amount of modified cellulose nanoparticles, the extraction time, and temperatures and salt content, were studied and optimized. Under the optimized extraction conditions (extraction time of 25 min, and extraction temperature of 50 °C), an analytical method for selected polycyclic aromatic hydrocarbons with low detection limits (0.75-1 ng L^-1) and the quantification limit (3-5 ng L^-1), good repeatability (3-7% at 20 ng L^-1), and reproducibility (9%-14%, n = 3) was developed. The linearity of the method was obtained in the range of 5-1000 ng L^-1 with R² > 0.9996. The enrichment factor was obtained for the spiked real aqueous samples (at 50 ng L^-1) in the range of 276-311. Also, the performance of the developed method was studied via the extraction of selected analytes in real water samples, and the relative recovery values were found to be in the range of 98-103%.

Roles of metal, ligand and post synthetic modification on metal organic frameworks to extend their hydrophobicity and applicability toward ultra-trace determination of priority organic pollutants

Implementation of metal organic frameworks (MOFs) in the separation science has attracted many researchers attention. In this study, the role of metal, ligand, the reaction condition and modification on the extraction efficiency of some MOFs was investigated. Among the prevalent reported MOFs, some members of the MIL and MOF-5 families were chosen, and eleven MOF-based sorbents were prepared by changing the metal and ligand type, reaction condition, and/or functionality through post synthetic modification (PSM). MIL-101 and MIL-101-NH₂ based structures were initially synthesized based on the chromium and iron salts. Also, three zinc-based structures including MOF-5, [NH₂(CH₃)₂]₂ [Zn₃(C₆H₄(CO₂)₂)₄].DMF.H₂O and [NH₂(CH₃)₂]₂ [Zn₃((C₆H₄)₂(CO₂)₂)₄].5DMF were synthesized. The PSM hydrophobic-oriented products of MILs were obtained by their reactions with benzyl alcohol. The resulted MOFs were characterized by FT-IR, PXRD, SEM, BET, BJH, water contact angle and TG analyses. The extraction trends of these nanostructures were studied toward some priority environmental pollutants such as polycyclic aromatic hydrocarbons (PAHs), chlorobenzenes (CBs), and benzene homologs. The extraction procedures were performed via adapting a home-made headspace needle trap extraction (HS-NTE) setup, and determinations were followed by gas chromatography-mass spectrometry (GC-MS). Among all the synthesized nanostructures, the chromium-based PSM product of MIL-101-NH-CH₂C₆H₅ proves its improved extraction capability for most of the model compounds. Eventually, the superior MOF was applied as the extractive phase in a HS-NTE-GC-MS method for isolation and trace determination of PAHs, in tea, coffee, and some other environmental water samples. Under the optimized conditions, the linear dynamic range (LDR) was in the range of 1-1000 ng L^-1 (R² > 0.992) while the limits of detection (LOD) and limits of quantification (LOQ) values were 0.1-0.2 and 0.3-0.7 ng L^-1, respectively. Also, the extraction capability of the Cr-based MIL-101-NH-CH₂C₆H₅ was compared with commercial polydimethyl siloxane-divinyl benzene (PDMS-DVB) fiber coating. The intra-and inter-day relative standard deviations for three replicates at the concentration levels of 20 and 500 ng L^-1 were in the range of 4-7% and 5-10%, respectively. The needle-to-needle reproducibility was also found to be in the range of 6-10%. Acceptable relative recovery values at the concentration levels of 20 and 500 ng L^-1 ranged from 89 to 98%, showing no significant matrix effect.

Evaluation of a cooling/heating-assisted microextraction instrument using a needle trap device packed with aminosilica/graphene oxide nanocomposites, covalently attached to cotton

Evaluation of the first commercial sample of a cooling/heating-assisted microextraction instrument.