A useful strategy based on chromatographic data combined with quality-by-design approach for food analysis applications. The case study of furanic derivatives in sugarcane honey

Analysis of Volatile Hydrocarbons (Pentene Dimers and Terpenes) in Extra Virgin Olive Oil: Optimization by Response Surface Methodology and Validation of HS-SPME-GC-MS Method

A head space-solid phase microextraction-gas chromatography-mass spectrometery (HS-SPME-GC-MS) method for the simultaneous analysis of pentene dimers from lipoxygenase (LOX) pathway, monoterpenes, and sesquiterpenes in extra virgin olive oil (EVOO) was proposed. A Doehlert design was performed; the conditions of the HS-SPME preconcentration step (extraction temperature, extraction time, sample amount, and desorption time) were optimized by response surface methodology, allowing defining the method operable design region. A quantitative method was set up using the multiple internal standard normalization approach: four internal standards were used, and the most suitable one was selected for area normalization of each external standard. The quantitative method was successfully validated and applied to a series of monocultivar EVOOs. This is the first paper in which a quantitative method using commercial standards has been proposed for the analysis of an important class of molecules of EVOO such as pentene dimers. The optimized method is suitable for routine analysis aimed at characterizing high quality EVOOs.

Analytical Quality by Design (AQbD) Approach to the Development of Analytical Procedures for Medicinal Plants

Scientific regulatory systems with suitable analytical methods for monitoring quality, safety, and efficacy are essential in medicinal plant drug discovery. There have been only few attempts to adopt the analytical quality by design (AQbD) strategy in medicinal plants analysis over the last few years. AQbD is a holistic method and development approach that understands analytical procedure, from risk assessment to lifecycle management. The enhanced AQbD approach reduces the time and effort necessary to develop reliable analytical methods, leads to flexible change control through the method operable design region (MODR), and lowers the out-of-specification (OOS) results. However, it is difficult to follow all the AQbD workflow steps in the field of medicinal plants analysis, such as defining the analytical target profiles (ATPs), identifying critical analytical procedure parameters (CAPPs), among others, because the complexity of chemical and biological properties in medicinal plants acts as a barrier. In this review, various applications of AQbD to medicinal plant analytical procedures are discussed. Unlike the analysis of a single compound, medicinal plant analysis is characterized by analyzing multiple components contained in biological materials, so it will be summarized by focusing on the following points: Analytical methods showing correlations within analysis parameters for the specific medicinal plant analysis, plant raw material diversity, one or more analysis targets defined for multiple phytochemicals, key analysis attributes, and analysis control strategies. In addition, the opportunities available through the use of design-based quality management techniques and the challenges that coexist are also discussed.

The Potential of Microextraction Techniques for the Analysis of Bioactive Compounds in Food

For a long time, the importance of sample preparation and extraction in the analytical performance of the most diverse methodologies have been neglected. Cumbersome techniques, involving high sample and solvent volumes have been gradually miniaturized from solid-phase and liquid-liquid extractions formats and microextractions approaches are becoming the standard in different fields of research. In this context, this review is devoted to the analysis of bioactive compounds in foods using different microextraction approaches reported in the literature since 2015. But microextraction also represents an opportunity to mitigate the environmental impact of organic solvents usage, as well as lab equipment. For this reason, in the recent literature, phenolics and alkaloids extraction from fruits, medicinal herbs, juices, and coffee using different miniaturized formats of solid-phase extraction and liquid-liquid microextraction are the most popular applications. However, more ambitious analytical limits are continuously being reported and emergent sorbents based on carbon nanotubes and magnetic nanoparticles will certainly contribute to this trend. Additionally, ionic liquids and deep eutectic solvents constitute already the most recent forefront of innovation, substituting organic solvents and further improving the current microextraction approaches.

Quality by design optimization of a liquid chromatographic-tandem mass spectrometric method for the simultaneous analysis of structurally heterogeneous pharmaceutical compounds and its application to the rapid screening in wastewater and surface water samples by large volume direct injection

This study focused on the Analytical Quality by Design (AQbD) optimization of the chromatographic separation and mass spectrometric detection of a wide group of structurally heterogeneous model pharmaceutical compounds (PhCs) and transformation products (TPs), chosen to cover the challenging issues of the co-presence of compounds characterized by (i) a wide range of physicochemical properties, (ii) the same mass transitions, and (iii) different ionisation modes. Italian consumption of PhCs were also considered as election criteria of target analytes. Octadecyl and pentafluorophenyl stationary phases, acetonitrile/methanol ratios and acidity of the eluents, column temperature, initial organic phase percentage, and elution gradient were investigated by AQbD, aiming at optimizing critical resolutions, sensitivities, and analysis time. Statistically significant models were obtained in most cases with fitting and cross-validation coefficients in the ranges of 0.681-0.998 and 0.514-0.967, respectively. After optimization, the analysis of target analytes was performed in a single chromatographic run, adopting a mixed acquisition mode based on scheduled acquisition windows comprising both single polarity and continuous polarity switching. For most investigated analytes the method provided detection limits in the sub-ng/L to low ng/L range, meeting for macrolides the sensitivity requested by the "Watch List" 2018/840/EU. The optimized method was applied to the direct injection analysis of PhCs and TPs in four wastewater treatment plant (WWTP) effluents and surface water (SW) samples collected in the receiving water bodies. Absolute values of matrix effect were found to be far higher than 20% for most target analytes in most samples. Seventeen PhCs and two TPs were quantified in at least one sample, at the wide concentration range of about 1-3200 ng/L. The most occurring PhCs in both WWTP effluents and SWs were levofloxacin (202-1239 and 100-830 ng/L), furosemide (865-3234 and 230-880 ng/L), ketoprofen (295-1104 and 270-490 ng/L), and ibuprofen (886-3232 and 690-1440 ng/L).

A Systematic AQbD Approach for Optimization of the Most Influential Experimental Parameters on Analysis of Fish Spoilage-Related Volatile Amines

The volatile amines trimethylamine (TMA) and dimethylamine (DMA) could be used as important spoilage indices for seafood products, assisting in the determination of the rejection period. In the present study, a systematic analytical duality-by-design (AQbD) approach was used as a powerful strategy to optimize the most important experimental parameters of headspace solid-phase microextraction (HS-SPME) and gas chromatography-mass spectrometry (GC-MS) conditions for the quantification of TMA and DMA in Sparus aurata. This optimization enabled the selection of the best points in the method operable design region for HS-SPME extraction (30 min; 35 °C; NaOH 15 M and NaCl 35%, w/v) and GC-MS analysis (80 °C; gradient 50 °C/min; flow rate 1 mL/min and splitless mode). The rejection day, estimated through the TMA concentration (>12 mg/100 g, at days 9–10), was compared with sensory (quality index method: day 7–8), physical (Torrymeter: day 8–9), and microbial (day 9–10) analysis, corroborating the suitability of the proposed approach for estimating the period for which they will retain an acceptable level of eating quality from a safety and sensory perspective.

LC method for the direct and simultaneous determination of four major furan derivatives in coffee grounds and brews

The simultaneous quantification of two potential genotoxic hydroxymethyl furan derivatives in coffee (furfuryl alcohol and 5‐hydroxymethylfurfural) alongside their carboxylic acid derivatives (2‐furoic acid and 5‐hydroxymethyl furoic acid, respectively) was carried out. Their extraction from ground roasted coffee using sonication, simple shaking or heat‐assisted shaking lead to similar results. A minimum of 97.3% of the four furan derivatives were extracted during the first extraction cycle using water, whereas methanol showed considerably lower extraction efficiency. A simple high‐performance liquid chromatography method coupled with diode array detection was developed for the simultaneous determination and was applied to roasted coffee extracts or brews. No sample pre‐treatment except for centrifugation was needed. The diode array detector was used to assess the purity of the peaks of interest in analyzed samples against authentic standards. The linearity according to Mandel, accuracy (recovery ≥ 89.9%) and precision (inter‐ and intraday relative standard deviation ≤ 4.5%) were checked. The values for the limit of detection and quantification ranged within 0.11–0.76 and 0.35–2.55 μg/mL, respectively. Filtered and espresso brews were analyzed for the four furan derivatives where furfuryl alcohol showed double the concentration of 5‐hydroxymethylfurfural and about ten times the concentrations of 2‐furoic acid or 5‐hydroxymethyl furoic acid.

Current trends on microextraction by packed sorbent – fundamentals, application fields, innovative improvements and future applications

MEPS, the acronym of microextraction by packed sorbent, is a simple, fast and user- and environmentally-friendly miniaturization of the popular solid-phase extraction technique (SPE).