On-line combining monolith-based in-tube solid phase microextraction and high-performance liquid chromatography- fluorescence detection for the sensitive monitoring of polycyclic aromatic hydrocarbons in complex samples

High-sensitive determination of tetracycline antibiotics adsorbed on microplastics in mariculture water using pre-COF/monolith composite-based in-tube solid phase microextraction on-line coupled to HPLC-MS/MS

Microplastics (MPs) act as carriers for organic pollutants (e.g. antibiotics) and microorganisms (e.g. bacteria) in waters, leading to the proliferation of antibiotic resistance genes. Moreover, the antibiotics adsorbed on MPs may exacerbate this process. For further research, it is necessary to understand the types and amounts of antibiotics adsorbed on MPs. However, due to the heavy work of MPs collection and sample pretreatment, there is a lack of analytical methods and relevant data. In this study, an in-tube solid phase microextraction (IT-SPME) on-line coupled to HPLC-MS/MS method based on amorphous precursor polymer of three-dimensional covalent organic frameworks/monolith-based composite adsorbent was developed, which could efficiently capture, enrich and analyze tetracycline (TCs) antibiotics. Under the optimal extraction parameters, the developed method was capable of detecting TCs at levels as low as 0.48-1.76 pg. This method was applied to analyze the TCs adsorbed on MPs of different particle sizes in mariculture water for the first time, requiring a minimum amount of MPs of only 1 mg. Furthermore, it was observed that there could be an antagonistic relationship between algal biofilm and TCs loaded on MPs. This approach could open up new possibilities for analyzing pollutants on MPs and support deeper research on MPs.

Silver nanoparticle-functionalized melamine-formaldehyde aerogel for online in-tube solid-phase microextraction of polycyclic aromatic hydrocarbons followed by HPLC-DAD analysis

Based on the π-metal interaction between silver nanoparticles (AgNPs) and aromatic compounds, AgNPs were in-situ grown to melamine-formaldehyde (MF) aerogel for improving the extraction performance to polycyclic aromatic hydrocarbons (PAHs). The AgNPs/MF aerogel was regulated through varing the concentration of reactants, and characterized by scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray powder diffraction. As a new extraction coating, the AgNPs/MF aerogel was coated to stainless-steel wires for in-tube solid-phase microextraction (IT-SPME). The extraction effects of MF aerogels before and after the modification of AgNPs were compared, and the AgNPs greatly improved the extraction ability for PAHs reaching to 166.4 %. Combining IT-SPME with high performance liquid chromatographic detection, an online analytical system was constructed. Furthermore, the sampling volume and rate, concentration of organic solvent, and desorption time were optimized factor by factor. The online analytical method with low detection limits (0.003-0.010 μg L-1) and efficient enrichment factors (1998-3237) for PAHs was established, which fastly detected trace level of PAHs in drinking and environmental water samples. Compared with other methods, the method was comparable or better in the detection limit and linear range, indicating prospective application of the AgNPs/MF aerogel for sample preparation.

Modern automated microextraction procedures for bioanalytical, environmental, and food analyses

Sample preparation frequently is considered the most critical stage of the analytical workflow. It affects the analytical throughput and costs; moreover, it is the primary source of error and possible sample contamination. To increase efficiency, productivity, and reliability, while minimizing costs and environmental impacts, miniaturization and automation of sample preparation are necessary. Nowadays, several types of liquid-phase and solid-phase microextractions are available, as well as different automatization strategies. Thus, this review summarizes recent developments in automated microextractions coupled with liquid chromatography, from 2016 to 2022. Therefore, outstanding technologies and their main outcomes, as well as miniaturization and automation of sample preparation, are critically analyzed. Focus is given to main microextraction automation strategies, such as flow techniques, robotic systems, and column-switching approaches, reviewing their applications to the determination of small organic molecules in biological, environmental, and food/beverage samples.

In-vial solid-phase extraction of polycyclic aromatic hydrocarbons in drug formulations stored in packaging containing rubber

Polycyclic aromatic hydrocarbons (PAHs) are a class of ubiquitous and persistent organic compounds that are significantly teratogenic, carcinogenic and mutagenic. Rubber stoppers commonly used in sterile formulation packaging materials often contain carbon black as the additive to enhance mechanical strength. However, PAHs may be formed during the production of carbon black, which could cause the drug formulations to be contaminated when contacting with the rubber stopper, and then enter the patient's body. The determination of PAHs in drug formulations is challenging, due to their trace amounts and matrix interference. Therefore, sample pretreatment is necessary and important. In this work, a novel technique, named in-vial solid-phase extraction (IVSPE), was developed for the selective extraction and enrichment of 16 PAHs in pharmaceuticals. The coated sample vial was directly used as the container for the whole process of sample pretreatment. As the solid-phase adsorbent, the coating was prepared by successively modifying the inner surface of a sample vial with polydopamine film and octadecylamine. PAHs could be selectively extracted through π-π stacking interaction and hydrophobic interaction, and then desorbed and enriched by a small amount of organic solvent. After systematic optimization of the coating preparation and the extraction process, the limits of detection and quantification of 16 PAHs were in the range of 0.002-0.60 ng mL^-1 and 0.007-2.00 ng mL^-1, respectively. Good linearities and precision of six repeated injections were obtained. The recoveries at three spiked concentration levels in normal saline were in the range of 62.72-106.90% with the relative standard deviation between 0.83% and 6.78%. Finally, PAHs in normal saline and powders for injection were extracted by established IVSPE, followed by separation and detection with high-performance liquid chromatography with a fluorescence detector and diode array detector (HPLC-FLD/DAD). It is worth noting that the preparation conditions of the adsorbent in the IVSPE method are mild, simple and green. Moreover, IVSPE has the advantages of having few work steps and avoiding the risk of contamination, because no special instrumentation or sample transfer is required. IVSPE could also be used for the pretreatment of multiple samples at the same time, which is beneficial to practical applications.

Al-Dalain S, Al-Dmour R, Alahmad A, Batarseh MI. Accumulation, Source Identification, and Cancer Risk Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in Different Jordanian Vegetables

The accumulation of polyaromatic hydrocarbons in plants is considered one of the most serious threats faced by mankind because of their persistence in the environment and their carcinogenic and teratogenic effect on human health. The concentrations of sixteen priority polycyclic aromatic hydrocarbons (16 PAHs) were determined in four types of edible vegetables (tomatoes, zucchini, eggplants, and cucumbers), irrigation water, and agriculture soil, where samples were collected from the Jordan Valley, Jordan. The mean total concentration of 16 PAHs (∑16PAHs) ranged from 10.649 to 21.774 µg kg−1 in vegetables, 28.72 µg kg−1 in soil, and 0.218 µg L−1 in the water samples. The tomato samples posed the highest ∑16PAH concentration level in the vegetables, whereas the zucchini samples had the lowest. Generally, the PAHs with a high molecular weight and four or more benzene rings prevailed among the studied samples. The diagnostic ratios and the principal component analysis (PCA) revealed that the PAH contamination sources in soil and vegetables mainly originated from a pyrogenic origin, traffic emission sources, and biomass combustion. The bioconcentration factors (BCF) for ∑16PAHs have been observed in the order of tomatoes > cucumbers and eggplants > zucchini. A potential cancer risk related to lifetime consumption was revealed based on calculating the incremental lifetime cancer risk of PAHs (ILCR). Therefore, sustainable agricultural practices and avoiding biomass combusting would greatly help in minimizing the potential health risk from dietary exposure to PAHs.

Determination of polycyclic aromatic hydrocarbons in surface waters by high performance liquid chromatography previous to preconcentration through solid-phase extraction by using polymeric monoliths

A simple, sensitive and reproducible solid-phase extraction method using plastic cartridges containing a monolithic sorbent (m-SPE), coupled to reverse phase liquid chromatography analysis, aiming to determine fifteen polycyclic aromatic hydrocarbons in surface water samples, was developed. The sorbent was easily prepared through a thermal polymerization reaction by using a mixture of n-butyl methacrylate as non-polar monomer and ethylene glycol dimethacrylate as crosslinker contained in a typical Polypropylene syringe cartridge. The effect of different parameters (type of hydrophobic monomer, elution solvent, sample volume, sorbent amount and sorbent load capacity) on the extraction efficiency was optimized. The optimal conditions were achieved by using n-butyl methacrylate as monomer, tetrahydrofurane (THF) as solvent for sorbent cleaning, THF:acetone (1:1) as elution solvent, 25.00 mL of sample volume, 600 µL of the polymerization mixture and 60 µg L^-1 as sample loading capacity. Finally, the sorbent charge capacity, the reusability of the cartridges and the extraction efficiency of the m-SPE monolith, as compared with a typical C8 cartridge, were evaluated. Under the optimized experimental conditions, enrichment factors were between 76 and 103, relative recovery factors from 78 to 103%, accuracy values in the range of 58 to 98%, and inter-batch reproducibility values from between 2 and 10%, were obtained. The limits of detection and quantification were obtained by two different procedures: the signal to noise (S/N) ratios (3 and 10, respectively) and the IUPAC convention. The lowest LOD and LOQ values, obtained with the S/N ratios, were between 0.02 and 1.00 µg L^-1, respectively whereas with the IUPAC convention the values were between 0.07 and 5 µg L^-1. Using this procedure, several PAHs could be detected in the surface water sample taken from a river stream located in La Plata city (Buenos Aires Province, Argentina).

Trace-Level Determination of Polycyclic Aromatic Hydrocarbons in Dairy Products Available in Spanish Supermarkets by Semi-Automated Solid-Phase Extraction and Gas Chromatography-Mass Spectrometry Detection

Polycyclic aromatic hydrocarbons (PAHs) have been classified as priority pollutants by the U.S. Environmental Protection Agency (EPA) and the European Commission on the grounds of their carcinogenic, mutagenic and teratogenic properties. Because of their ubiquity in industrial processes and the environment, PAHs can reach milk and dairy products and, eventually, humans. In this work, a new method was developed to detect and quantify sixteen of the EPA’s priority PAHs in commercial milk and dairy products. The method involves liquid−liquid extraction (LLE) followed by semi-automated solid-phase extraction (SPE) to clean up and preconcentrate the analytes prior their detection and quantification by gas chromatography−mass spectrometry (GC−MS). The proposed method provided high precision (relative standard deviation < 11.5%), recoveries of 80−107% and low detection limits (1−200 ng/kg). The method was applied to analyze 30 dairy products, the majority of which contained some PAH at concentrations from 7.1 to 1900 ng/kg. The most-detected analytes were the lighter PAHs (naphthalene, acenaphthylene, fluorene and phenanthrene). None of the samples, however, contained more than four PAHs.

Covalent organic framework-V modified porous polypropylene hollow fiber with detachable dumbbell-shaped structure for stir bar sorptive extraction of benzophenones

Polypropylene hollow fiber is a kind of ideal material for stir bar sorptive extraction (SBSE) which possesses the advantages of porous structure, large specific surface area, high mechanical strength, and good solvent resistance. In this work, a novel SBSE device using the polypropylene hollow fiber-based stir bar with the detachable dumbbell-shaped structure was designed and prepared. Covalent organic framework-V (COF-V), which possesses porous structure, sphere shape with large specific surface area, was synthesized at room temperature and grown on polypropylene hollow fiber by polydopamine modification method. Compared with previous studies which used etched poly(ether ether ketone) as supporting material, polypropylene hollow fiber omitted the complicated, difficult and dangerous pretreatment process with high concentrated sulfuric acid. The immobilization of COF-V on the polypropylene hollow fiber significantly endows them with multiple interaction abilities including hydrophobic interaction and π-π interaction. The stir bar showed good performance and stability for the extraction of four benzophenones including BP-1, BP-6, BP-3 and Ph-BP. By coupling with HPLC-UV, the COF-V@polypropylene hollow fiber based SBSE method showed wide linear range (0.1-200 ng/mL), excellent linearity (R² ≥ 0.9979), high sensitivity (LODs in the range of 0.02-0.03 ng/mL), and good repeatability (RSD ≤ 5.21%). This method was successfully applied to the analysis of benzophenones in soil and sunscreen samples.

Rapid synthesis of graphite phase carbon nitride/zeolitic imidazolate framework-8 with hierarchical structure and its superior adsorption of polycyclic aromatic hydrocarbons from aqueous solution

Graphite phase carbon nitride (g-C₃N₄) incorporating zeolitic imidazolate framework-8 (ZIF-8) nanocomposite (g-C₃N₄ /ZIF-8) with hierarchical structure was synthesized successfully by simple and rapid in situ growth method at room temperature. The composites were used as an adsorbent of solid-phase extraction (SPE) and the superior adsorptive removal of polycyclic aromatic hydrocarbons (PAHs) for the first time. Under several optimum conditions, the g-C₃N₄ /ZIF-8-SPE-HPLC-FLD method show low detection limits (0.006-3.41 μg L^-1) and limit of quantification (0.02-11.3 μg L^-1), wide linear ranges from 0.02 to 1000 μg L^-1 for all compounds, correlation coefficients (r) of more than 0.9968, and satisfying reproducibility (relative standard deviations, RSDs < 4.0% for intra-day, RSDs < 8.3% for inter-day), the spiked recoveries at two levels of 10.0, 50.0 μg L^-1 were in the range of 77.4%-114% with the RSDs less than 8.66%. In addition, the g-C₃N₄/ZIF-8 nanocomposites demonstrated excellent enrichment ability and extraction efficiency for PAHs compared with commercial adsorbents, which might since there were strong π-π stacking force, hydrophobic interaction, hydrogen bonding, and more adsorption sites compared with other adsorbents. Finally, the g-C₃N₄ /ZIF-8 based SPE method was combined with high-performance liquid chromatography (HPLC) to detect fifteen PAHs in environmental water samples successfully.

A novel polyhedral oligomeric silsesquioxane-based hybrid monolith as a sorbent for on-line in-tube solid phase microextraction of bisphenols in milk prior to high performance liquid chromatography-ultraviolet detection analysis

An on-line in-tube solid-phase microextraction (in-tube SPME) coupled with high-performance liquid chromatography (HPLC) method was proposed based on a novel polyhedral oligomeric silsesquioxane (POSS)-hybrid monolith for the determination of four bisphenols (BPs) in milk. The monolith was synthesized using acrylamide (AM) and monomethacrylate-functionalized POSS (mono-MA-POSS) as functional monomers to copolymerize with ethylene dimethacrylate (EDMA). Due to the abundant hydrogen bonding, π-π and hydrophobic interaction sites, the synthetic monolith displayed satisfying extraction performance for target BPs. Under the optimized conditions, the developed on-line in-tube SPME-HPLC method exhibited low limits of detection (LODs) (0.030-0.055 ng mL^-1). The spiked recoveries were between 85.4 % and 111.8 %, and the relative standard deviations (RSDs) were less than 3.5 % for all the analytes. The results showed that the proposed method provided alternative for the analysis of BPs in complex samples.

Thermal desorption gas chromatography-mass spectrometric analysis of polycyclic aromatic hydrocarbons in atmospheric fine particulate matter

Thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) is used to analyze polycyclic aromatic hydrocarbons (PAHs) in atmospheric fine particulate matter. However, despite the high sensitivity of TD-GC-MS, the recovery rate of PAHs is greatly influenced by active sites in the equipment. PAHs are decomposed or adsorbed at active sites, decreasing quantitative accuracy. Also, the thermal extraction of PAHs is easily affected by the matrix in PM2.5 samples, decreasing the thermal extraction efficiency. Herein, the analytical sensitivities of PAHs were improved by adding analyte protectant (AP) and thermal desorption aid (TDA) as an auxiliary agent. The combination of 2 µL of 0.5 w/v% D-sorbitol (as AP) and 2 µL of 10 w/v% Tween®20 (as TDA) was found to be most effective in improving the analytical sensitivity of PAHs. The sensitivities of 5-6-ring PAHs with high boiling points increased most when analyzing blank filter papers added with PAHs standard sample or real samples of PM2.5 compared with the samples without the auxiliary agent. When analyzing real samples of PM2.5, the peak areas of 5-ring and 6-ring PAHs in the PM2.5 sample added with the optimized auxiliary agent were 1.40 and 1.96 times that without the auxiliary agent. It is considered that AP in the auxiliary agent covered active sites and protected PAHs undergoing decomposition or adsorption. TDA improved the thermal extraction rate of high boiling point PAHs. When using alternative heat sampling equipment to analyze low concentrations of high boiling point components, the auxiliary agent proposed herein can increase the analytical sensitivity toward the target compounds.

Magnetic covalent organic framework nanocomposites as a new adsorbent for the determination of polycyclic aromatic hydrocarbons in water and food samples

A magnetic covalent organic framework nanocomposite (Fe₃O₄@COF(Tp-NDA)) was synthesized via a solvothermal method, used as a magnetic adsorbent for the extraction of polycyclic aromatic hydrocarbons (PAHs) from lake water, tea, coffee, and fried chicken, and detected using a high performance liquid chromatography-ultraviolet detector. The synthesized magnetic adsorbent was characterized via transmission electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, N₂ adsorption-desorption isotherm analysis and vibrating sample magnetometry. Parameters that affected the extraction conditions and desorption conditions were optimized. Adsorption equilibrium could be attained within 3 min. The prepared magnetic material could be reused 10 times. The limits of detection and quantification were 0.05-0.25 μg L^-1 and 0.17-0.83 μg L^-1, respectively. The recovery was 74.6-101.8% with a relative standard deviation of below 4.2%. The method was successfully used to detect PAHs in various samples.

In-a-syringe surfactant-assisted dispersive liquid-liquid microextraction of polycyclic aromatic hydrocarbons in supramolecular solvent from tea infusion

In this work, an automated surfactant-assisted dispersive liquid-liquid microextraction approach based on in-a-syringe concept was developed for the first time. The procedure assumed mixing aqueous sample phase and hydrophilic emulsion containing hexanoic acid and sodium hexanoate in a syringe of flow system. Sodium hexanoate acted as an emulsifier in dispersive liquid-liquid microextraction process and it was required for the formation of supramolecular solvent phase. After spontaneous separation of phases in the syringe, the upper supramolecular solvent phase containing target analytes was withdrawn and analyzed. The procedure was applied to the determination of 13 polycyclic aromatic hydrocarbons in tea infusion by high performance liquid chromatography with fluorescence detection. It was shown that the supramolecular solvent provided effective extraction of polycyclic aromatic hydrocarbons and fast phase separation in the syringe without centrifugation. The enrichment factors were in the range of 38-46. The automated microextraction procedure lasted 4 min including syringe cleaning. Under optimal experimental conditions the linear detection ranges were found to be 0.05-50.00 μg L^-1 with limits of detection calculated from a blank test, based on 3σ, 0.02-0.04 μg L^-1. Recovery values in the range of 85-105% were achieved for tea infusion with a reproducibility expressed as RSD less than 4.1%.

Polyaniline/titanium dioxide nanorods functionalized carbon fibers for in-tube solid-phase microextraction of phthalate esters prior to high performance liquid chromatography-diode array detection

To improve extraction performance of carbon fibers (CFs) towards phthalate esters (PAEs), titanium dioxide (TiO₂) nanorods array was in-situ grown on the surface of CFs, then polyaniline (PANI) was used to modify it. PANI/TiO₂ nanorods-CFs were placed into a polyetheretherketone tube for solid-phase microextraction (SPME). Combining the tube to high performance liquid chromatography (HPLC), it was evaluated and displayed good extraction performance for several PAEs. Compared with bare CFs, TiO₂ nanorods and PANI, PANI/TiO₂ nanorods presented best performance, attributed to the unique advantages between high surface area of TiO₂ nanorods and multiple adsorption interactions (like π-π stacking, hydrogen bond) of PANI. After the optimization of the important factors (sampling volume, sampling rate, sample pH, concentrations of organic solvent and salt in sample, and desorption time), the online in-tube SPME-HPLC method was established. It provided low limits of detection (0.01-0.05 μg L^-1) and wide linear ranges (0.03-30, 0.10-30, 0.17-30 μg L^-1) with correlation coefficients larger than 0.9991. The relative standard deviations (n=6) between intra-day and inter-day tests were in the ranges of 3.5-10.3% and 4.7-13.9%, respectively. The method was successfully used to determine seven PAEs in real water samples. Besides of satisfactory durability, the material also exhibited superior extraction performance than some materials.

External trap-and-release membrane inlet for photoionization mass spectrometry: Towards fast direct analysis of aromatic pollutants in aquatic systems

RATIONALE

Fast and sensitive detection of aromatic hydrocarbons (AHs) in water is of high importance because of their significant impact on human health and the environment. For this, resonance-enhanced multiphoton ionization (REMPI) coupled to trap-and-release membrane-introduction mass spectrometry (T&R-MIMS) offers the possibility of sensitive on-line water analysis with a time resolution of minutes.

METHODS

REMPI is a versatile tool for sensitive gas-phase analysis, in which AHs are selectively ionized in complex gas mixtures by the subsequent absorption of at least two photons. In T&R-MIMS, selective extraction and enrichment of analytes from water can be achieved using semipermeable membranes. By the subsequent stimulated desorption of enriched compounds, mass spectrometric detection is enabled.

RESULTS

We present an external T&R inlet for hollow-fiber membranes coupled to REMPI time-of-flight mass spectrometry, which enables direct and sensitive detection of semi-volatile AHs in water. In laboratory experiments, spiked water samples were analyzed. For the investigated compounds, limits of detection (LODs) in the range 1-47 ng/L were determined. The LODs are approximately one order of magnitude lower than in a previously reported continuous membrane-introduction approach using a planar membrane. Further improvement of LOD may be realized by extending the trapping time and by increasing the release temperature. Furthermore, the system was applied to investigate different fuels suspended in water and real water samples. The obtained data are in good agreement with findings of a former study.

CONCLUSIONS

In the framework of the present study, we demonstrate the high potential of the combination of REMPI and T&R-MIMS in the form of a newly developed external hollow-fiber membrane inlet. With the developed system, semi-volatile AHs can be directly detected down to ng/L levels on a minute time scale. The approach thus may pave the way to future ship application in marine sciences, natural resources exploration or pollutant and hazard detection.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

Green choline amino acid ionic liquids aqueous two-phase extraction coupled with synchronous fluorescence spectroscopy for analysis naphthalene and pyrene in water samples

A novel aqueous two-phase extraction method has been established for the determination of polycyclic aromatic hydrocarbons in water sample. This method was based on the extraction of naphthalene and pyrene from water by means of choline amino acid ionic liquids aqueous two-phase system and their determination by synchronous fluorescence spectroscopy. In synchronous fluorescence spectroscopy, the fluorescence peaks of naphthalene and pyrene were completely separated to meet the requirement of simultaneous determination. For this method, good linear calibration curves of naphthalene and pyrene were obtained in the range of 0.50-10.0, 0.05-5.0 μg mL^-1, respectively, and limits of detection were 0.211, 0.012 μg mL^-1, respectively. The proposed method was successfully applied for the simultaneous determination of naphthalene and pyrene in water samples, which was considered as an excellent green analysis according Analytical Eco-Scale.

Application of biocharcoal aerogel sorbent for solid-phase microextraction of polycyclic aromatic hydrocarbons in water samples

A facile method was introduced for preparing a biocharcoal aerogel, which was derived from pomelo peel as the only raw material. The inner spongy layer of pomelo peel was freeze-dried for maintaining three-dimensional structure and then carbonized under high temperature and oxygen-limited conditions. The morphological structure and graphitization degree of biocharcoal aerogel were characterized using a scanning electron microscope and Raman spectrum. After sifting and grinding, the biocharcoal aerogel as an adsorbent was coated onto the surface of stainless steel wires. Through placing the wires into a polyetheretherketone tube, the in-tube solid-phase microextraction device was obtained. Coupled with high-performance liquid chromatography, it exhibited good extraction performance for polycyclic aromatic hydrocarbons, then an online analytical method was established with low limits of detection (0.005-0.050 ng/mL), wide linear ranges (0.017-15 ng/mL) with superior correlation coefficients higher than 0.9990, high enrichment factors (1128-3425), and acceptable intra- and inter-day repeatabilities (relative standard deviations ≤ 6.7%, n = 3). The method was applied to detect polycyclic aromatic hydrocarbons in bottled water samples, environmental water samples, and soft drinks with satisfactory recoveries (83.3-120.9%). This research not only developed a new carbon aerogel but also evaluated its adsorption performance in sample preparation.

Critical review of micro-extraction techniques used in the determination of polycyclic aromatic hydrocarbons in biological, environmental and food samples

Polycyclic Aromatic Hydrocarbons (PAHs) are ubiquitous environmental contaminants and their accurate determination is very important to human health and environment safety. In this review, sorptive-based micro-extraction techniques [such as Solid-Phase Micro-extraction (SPME), Stir Bar Sorptive Extraction (SBSE), Micro-extraction in Packed Sorbent (MEPS)] and solvent-based micro-extraction [Membrane-Mediated Liquid-Phase Micro-extraction (MM-LPME), Dispersive Liquid-Liquid Micro-extraction (DLLME), and Single Drop Micro-extraction (SDME)] developed for quantification of PAHs in environmental, biological and food samples are reviewed. Moreover, recent micro-extraction techniques that have been coupled with other sample extraction strategies are also briefly discussed. The main objectives of these micro-extraction techniques are to perform extraction, pre-concentration and clean up together as one step, and the reduction of the analysis time, cost and solvent following the green chemistry guidelines.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.