The method development for elimination of matrix interferences in seawater monitoring to determine elements by ICP-MS

A simple, versatile, and economical method development with matrix elimination to determine the elements As, Ba, Cd, Co, Cr, Cu, Mn, Ni, Pb, V, and Zn in seawater by using the technique of inductively coupled plasma mass spectrometry is reported. Real seawater was used as a matrix for the standard adding calibration and other validation parameters. The samples were open digested at 80 °C with 2 mL HNO₃ and 0.25 mL HF under the hood. A two-step digestion procedure was applied, and the volume was completed to 10 mL with deionized water. Chloride removal was accomplished by using this procedure. The concentrations of Ca and Mg ions were lessened by 15% and 20%, respectively. These results were verified with ion chromatography, SEM-EDS, and mass difference analyses. It was observed that there was a 40% loss in the average mass of particulate matter on the filter media after applying the two-step digestion procedure. Recovery and trueness values were in the range of 86 and 109%. The average precision amounts for elements were determined as RSD (%) in the range of 1.0% and 3.4%. The concentrations of elements determined in the 18 samples collected from the Konyaaltı Beach located in Antalya were higher than the maximum allowable concentrations of the Directive 2013/39/EU.

An assessment of spatial distribution and atmospheric concentrations of ozone, nitrogen dioxide, sulfur dioxide, benzene, toluene, ethylbenzene, and xylenes: ozone formation potential and health risk estimation in Bolu city of Turkey

Atmospheric pollutants including ozone, nitrogen dioxide, sulfur dioxide, and BTEX (benzene, toluene, ethylbenzene, and xylenes) compounds were evaluated concerning their spatial distribution, temporal variation, and health risk factor. Bolu plateau where sampling was performed has a densely populated city center, semi-rural areas, and forested areas. Additionally, the ozone formation potentials of BTEXs were calculated, and toluene was found to be the most important compound in ground level ozone formation. The spatial distribution of BTEXs and nitrogen dioxide pollution maps showed that their concentrations were higher around the major roads and city center, while rural-forested areas were found to be rich in ozone. BTEXs and nitrogen dioxide were found to have higher atmospheric concentrations in winter. That was mostly related to the source strength and low mixing height during that season. The average toluene to benzene ratios demonstrated that there was a significant influence of traffic emissions in the region. Although there was no significant change in sulfur dioxide concentrations in the summer and winter seasons of 2017, the differences in the spatial distribution showed that seasonal sources such as domestic heating and intensive outdoor barbecue cooking were effective in the atmospheric presence of this pollutant. The lifetime cancer risk through inhalation of benzene was found to be comparable with the limit value (1 × 10^-6) recommended by USEPA. On the other hand, hazard ratios for BTEXs were found at an acceptable level for different outdoor environments (villages, roadside, and city center) for both seasons.

Source identification of exhaust and non-exhaust traffic emissions through the elemental carbon fractions and Positive Matrix Factorization method

Our study implies the importance of exhaust and non-exhaust emissions in a highway road tunnel, which is crucial to assess their impacts on air quality, human health, climate and developing functional methods for controlling. The total suspended particulates (TSP) and road dust (RD) samples were collected by PUF samplers and manually sweeping, respectively. Campaigns were performed in the summer and winter of 2014 in a highway road tunnel in Bolu, Turkey. Chemical analyses were presented to characterize the contents of organic carbon (OC) fractions (OC1,2,3,4), elemental carbon (EC) fractions (EC1,2,3,4,5,6), polycyclic aromatic hydrocarbons (PAHs) and metals (Al, Ba, Ca, Cu, Mg, Mn, Pb, Sr, Cr and Fe) in the collected TSP and RD samples. Positive matrix factorization (PMF) and orthogonal (Deming) regression analysis were applied to find out the exhaust and non-exhaust vehicle emissions of metal and carbonaceous species in the tunnel. The results showed that the identified source profiles included resuspended road dust (43%), non-exhaust emissions (37%), diesel exhaust emissions (13%), and gasoline exhaust emissions (7%). The relationship between emission markers of metal species and EC carbon fractions was supported by correlation studies. Among these EC fractions, EC4 and EC2 were the most abundant fractions in aerosol and RD samples, respectively and so they highly represented the diesel and non-exhaust emissions. Besides, the EC1 fraction was the indicator of gasoline-fueled emissions. Lower EC1 and higher soot-EC contribution obtained in tunnel aerosol (AS) samples showed the dominance of diesel-fueled vehicles in the tunnel. The data represented herein would help to identify the characteristic of vehicle emissions.

Source apportionment of biogenic and anthropogenic VOCs in Bolu plateau

Total of 69 volatile organic compounds (VOCs) including both biogenic (isoprene, monoterpenes and oxygenated compounds) and anthropogenic ones were investigated in Bolu plateau by passive sampling technique. The main objective of this study was to determine spatial distributions, seasonal variations and possible sources for a wide variety of VOCs. Two-week passive sampling campaigns were performed in the winter and summer of 2017. Anthropogenic VOCs were predominant with a high percentage of contribution, 91% and 69% for winter and summer, respectively. Relatively higher concentrations of biogenic VOCs during the summer campaign were found to be related to higher solar intensity, temperature and amount of broad-leaved tree species. Benzaldehyde, toluene, phenol, benzene, hexane, decanal, benzothiazole, dodecane and acetophenone were anthropogenic VOCs with higher concentrations. Among biogenic VOCs, hexanal, alpha-pinene and limonene were found to be in higher concentrations. Spatial distribution maps were drawn for each VOC. Elevated concentrations of VOCs around the city center and major roads indicate that emissions from domestic heating activities and vehicular emissions can be significant sources of VOCs. The results were also supported by Positive Matrix Factorization (PMF) analyses and G-score distribution maps. Solvent evaporation, wood-coal combustion, biogenic emissions (pine, grain, grass), city atmosphere (styrene emissions from plastic production), biogenic (hornbeam, pine, juniper) and vehicle emissions were the identified as the primary VOC sources in Bolu plateau, contributing 31%, 22%, 8.0%, 8.0%, 13%, and 18%, respectively to the total VOC concentrations.

Intraday and interday variations of 69 volatile organic compounds (BVOCs and AVOCs) and their source profiles at a semi-urban site

To study the intraday and interday patterns and possible sources of volatile organic compounds (VOCs), 6-h active sampling was performed in April, May, June, July, and August 2017 and in January 2018 in a semi-urban site in Bolu, Turkey. Totally 69 VOCs having biogenic (BVOCs, i.e., isoprene, monoterpenes and oxygenated VOCs) and anthropogenic origins (AVOCs) were examined. Fifty-four of sixty-nine analyzed VOCs could be detected. Decanal followed by benzaldehyde, benzene, phenol, and toluene were detected as the leading anthropogenic VOCs whereas alpha-pinene and hexanal were the dominant biogenic VOCs. There was a decrease in concentrations of most of the VOCs in January and April when light intensity and temperature were relatively low. Atmospheric levels of total biogenic VOCs exceeded that of anthropogenic VOCs in all months except for January and April. Dependence of biogenic VOC emissions on the light intensity, temperature and the increase in leaves were considered to be effective in their higher levels in summer and daytime periods. The daytime anthropogenic VOCs concentrations were higher than the nighttime anthropogenic VOCs probably due to intense vehicle traffic during working hours and/or increased volatilization from their sources at elevated temperatures. The VOCs that significantly and negatively correlated with ozone were evaluated as effective BVOCs in the ozone formation while the maximum incremental reactivity (MIR) method gave the contribution of AVOCs. Positive Matrix Factorization (PMF) was applied for the source apportionment. G score graphs and G score pollution roses were also used to identify possible sources of investigated VOCs. Solvent evaporation, gasoline-powered vehicle emissions, fossil fuel (residential heating), biogenic (hornbeam, grass, oak, beech) emissions, diesel/domestic activities and forested city atmosphere were identified as the possible VOC sources in the study area.

Investigation of topsoil production from marine dredged materials (DMs) in Turkey for urban landscaping works

As known, marine dredged materials (DMs) are highly nuisance wastes if they are not correctly reused or removed. In this work, the usability of DMs to the technical terms as manufactured topsoil (MT) in the urban landscaping works is discussed. Firstly, the leaching potentials of DMs were determined according to the related legislations to identify their hazardousness features. Secondly, DMs were subject to some treatment stages such as sieving, desalination, organic amelioration via peat and sheep manure, and pH adjustment to turn into an alternative natural soil pursuant to the British Standard in the scope of soil quality improvement studies as there is not any national standard in Turkey for the production of topsoil from different materials. Then, MT mixtures were prepared with washed and unwashed DM, peat and sheep manure in different mixing ratios (v/v); 33%, 50% and 67% DM, respectively. Consequently, high quality grass seed mixtures used for the landscaping applications were monitored for six months. The results demonstrate the availability of DM as alternative MT in the urban landscaping areas. Thus, important data were obtained as to the use of DM at alternative areas such as green city, green roof, shopping centers, organized industry, etc.

Spatial distributions and seasonal variations of organochlorine pesticides in water and soil samples in Bolu, Turkey

In this study, a total of 75 water samples (38 groundwater and 37 surface water samples) and 54 surface soil samples were collected from the five districts of Bolu, which is located in the Western Black Sea Region of Turkey in the summer season of 2009. In the autumn season, 17 water samples (surface water and groundwater samples) and 17 soil samples were collected within the city center to observe the seasonal changes of organochlorine pesticides (OCPs). Groundwater and surface water samples were extracted using solid phase extraction. Soil samples were extracted ultrasonically. Sixteen OCP compounds in the standard solution were detected by a gas chromatography-electron capture detector (GC-ECD). Therefore, the method validation was performed for those 16 OCP compounds. However, 13 OCP compounds could be observed in the samples. The concentrations of most OCPs were higher in samples collected in the summer than those in the autumn. The most frequently observed pesticides were endosulfan sulfate and 4,4'-dichlorodiphenyltrichloroethane (DDT) in groundwater samples, α-HCH in surface water samples, and endosulfan sulfate in soil samples. The average concentration of endosulfan sulfate was the highest in water and soil samples. Compared to the literature values, the average concentrations in this study were lower values. Spatial distribution of OCPs was evaluated with the aid of contour maps for the five districts of Bolu. Generally, agricultural processes affected the water and soil quality in the region. However, non-agricultural areas were also affected by pesticides. The concentrations of pesticides were below the legal limits of European directives for each pesticide.

Combined use of PAH levels and EROD activities in the determination of PAH pollution in flathead mullet (Mugil cephalus) caught from the West Black Sea coast of Turkey

The aim of this study was to determine the extent of polycyclic aromatic hydrocarbon (PAH) pollution by measuring PAH levels and 7-ethoxyresorufin-O-deethylase (EROD) activities in flathead mullet (Mugil cephalus) samples caught from the West Black Sea coast of Turkey. The fish samples were caught in August 2008-2011. The levels of 13 PAHs were measured by high-performance liquid chromatography (HPLC) in the liver of fish. Most of the measured PAHs had three rings (low molecular weight). The frequencies of detection of PAHs were higher in fish samples caught from Zonguldak Harbour and Gülüç Stream Mouth than those from Sakarya River Mouth, Amasra and Kefken. EROD activities and cytochrome P4501A (CYP1A) protein level were also measured in the fish liver microsomes. Highly elevated EROD activities and CYP1A levels were measured in the mullet samples caught from Zonguldak Harbour and Gülüç Stream than those from Amasra and Kefken. The detection of PAHs in the liver of fish samples shows recent exposure to PAHs. The chemical analyses of PAHs and EROD activity results together reflected the extent of PAH pollution in the livers of fish caught from the West Black Sea coast of Turkey. The results indicate that Zonguldak Harbour is the most polluted site in the West Black Sea coast of Turkey.

Determination of organochlorine pesticide concentrations in flathead mullet (Mugil cephalus) caught from the western Black Sea coast of Turkey

The objective of this study was to determine the levels of 14 organochlorine pesticides (OCPs) in flathead mullet (Mugil cephalus) caught from the western Black Sea coast of Turkey. The fish samples were caught from five different locations of the western Black Sea coast of Turkey in August 2009. Organochlorine pesticides were extracted from the liver tissues, and then the levels of OCPs were measured using gas chromatography with an electron capture detector. Organochlorine pesticides were detected in all locations. The levels of total OCPs in fish samples ranged between 0.224 and 1.103 μg g(-1) dry weight in the western Black Sea coast of Turkey. DDT, beta-HCH, and endosulfan I were the dominant OCPs in the fish samples. The levels of DDT in fish samples ranged between 0.081 and 0.186 μg g(-1) dry weight. The levels of total HCH in fish samples ranged between 0.007 and 0.376 μg g(-1) dry weight in the western Black Sea coast of Turkey. Although the usage of OCPs was banned in Turkey, the results of this study clearly indicated the presence of OCPs in the western Black Sea coast of Turkey and exposure of living organisms to these chemicals.

Sources of polycyclic hydrocarbons and pesticides in soluble fraction of deposition samples in Kocaeli, Turkey

A wet-dry deposition sampler was located at The Scientific and Technological Research Council of Turkey-National Metrology Institute (TUBITAK-UME) station, and a bulk deposition sampler was placed at the Kadıllı village to determine the atmospheric deposition flux of polycyclic aromatic hydrocarbons (PAHs) and pesticides (organochlorine and organophosphorus) in soluble fraction of samples in Kocaeli, Turkey. The 28 samples for each wet, dry, and total deposition were collected weekly from March 2006 to March 2007. Gas chromatography-tandem mass spectrometry was used to analyze the samples which were prepared by using solid-phase extraction (SPE) method. The sum of volume weighted mean of deposition fluxes was obtained as 7.43 μg m(-2) day(-1) for wet deposition, 0.28 μg m(-2) day(-1) for dry deposition and 0.54 μg m(-2) day(-1) for bulk deposition samples for PAHs and 9.88 μg m(-2) day(-1) for wet deposition, 4.49 μg m(-2) day(-1) for dry deposition, and 3.29 μg m(-2) day(-1) for bulk deposition samples for pesticides. While benzo(a)anthracene had the highest fluxes among PAH compounds for all types of depositions, guthion and phosphamidon had the highest deposition flux compared with the other pesticides. Benzo(ghi)perylene, dibenz(a,h)anthracene, indeno(1,2,3-c,d)pyrene, benzo(a)pyrene, and acenaphthene were not detected in any of the samples. Beta-HCH, gamma-HCH, and endrin aldehyde were the only compounds among 18 organochlorine pesticides to be detected in all deposition samples. The main sources of pesticides were the high number of greenhouses around the sampling stations. However, all of the organophosphorus pesticides were detected in all deposition samples. The pollution sources were identified as coal and natural gas combustion, petrogenic sources, and traffic for TUBITAK-UME station whereas coal and natural gas combustion and traffic were the main sources for Kadıllı station by considering the results of factor analysis, ratios, and wind sector analysis.

Estimation of measurement uncertainty of polychlorinated biphenyls, polycyclic aromatic hydrocarbons and organochlorine pesticides in the atmosphere using gas chromatography-mass spectrometry and gas chromatography-electron capture detector

Estimation of uncertainty of measurement is a crucial issue to achieve accurate measurement results. When the target has adverse environmental and health effects, accuracy of the results become more important. POPs are the pollutants that have toxic effects and unfortunately, there is a lack of information about uncertainty of the method for determining POPs in air samples. In this work, uncertainty calculations were carried out for PCBs, OCPs, and PAHs in air samples analyzed by using GC-MS and GC-ECD. The main dominant sources for combined uncertainty were calibration curve, recovery and repeatability. The relative uncertainties were found to be in the range of 23-52% for PCBs, 24-59% for OCPs and 23-90% for PAHs.

Seasonal variation, sources, and gas/particle concentrations of PCBs and OCPs at high altitude suburban site in Western Black Sea Region of Turkey

Daily gas and particle phase samples were collected during winter and summer seasons in Bolu, which is located in the high altitude Western Black Sea Region of Turkey. Samples were analyzed to determine the concentrations of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). Concentrations of endosulfan sulfate and methoxychlor were found to be highest in the summer and winter periods, respectively. The measured average concentration of endrin was considerably higher (10-50 fold) than the values reported in the literature for similar sites. The agricultural areas located to the south, south-east and south-west of the sampling point were identified as source regions. PCBs were found predominantly in the gas phase in both seasons and 3-chlorinated biphenyls were found to be abundant in the winter period, due to pollutants transported from the city centre and a waste incineration plant by southerly and easterly winds. The concentrations of PCB-180 and PCB-194 were found to be higher than values reported in the literature. The correlation between atmospheric concentrations and temperature was obtained by using Clausius-Clapeyron (CC) plots. The CC plots for most of the OCPs showed shallow negative slopes with low r(2) values, which might be due to the presence of local sources, i.e., agricultural areas around the sampling site and the dominance of evaporation. The CC plots showed steep positive slopes for most of the PCB compounds. Most of the PCB compounds were carried from the ongoing local sources.

Validation and uncertainty assessment of rapid extraction and clean-up methods for the determination of 16 organochlorine pesticide residues in vegetables

Rapid and practical extraction methods were developed using dichloromethane and ethyl acetate for the routine determination of 16 organochlorine pesticide residues and applied to approximately 30 fresh vegetables (tomato, cucumber and pepper) by using GC-ECD. The procedures were validated. Measurement uncertainties were calculated by applying bottom-up approach. The average recoveries obtained for each pesticide ranged between 65 and 102% at three fortification levels. The uncertainties of the analytical methods were lower than 21 and 16% with and without recovery correction, respectively. The calculated limits of detection and quantification were typically less than 1 ng g(-1) that were much lower than the maximum residue levels.

Geographic patterns of elemental deposition in the Aegean region of Turkey indicated by the lichen, Xanthoria parietina (L.) Th. Fr

Lichen samples from different parts of the world have been known to accumulate elements to a greater degree than higher plants, if they are exposed to these elements from the atmosphere or from water and sediments. It has been hypothesized that lichens can be used to monitor air pollution around point and area emission sources. Local variation (variation in substrate, age and morphology of lichen samples) of element concentrations would not be large enough to affect the concentration patterns in large areas. We tested this hypothesis in the Aegean region of Turkey, which is very urbanized and industrialized. No such study has been conducted before in this part of the country. A total of 234 samples of the lichen Xanthoria parietina were collected from a 51,800-km2 area. Samples were washed and analyzed by INAA and ICP-AES for 35 elements. The range of the concentrations for most of the elements on a local scale was an order of magnitude lower than for the element concentrations on a regional scale. The mean local coefficient of variance (CV) was found to be 15, providing that the local variation did not affect the concentration of elements in the sampling region. According to cluster analysis, 8 (As, Hg, Pb, Sb, Fe, Mn, Na and K) elements are indicative of important local pollution locations and their zone of impact in the region. By mapping the concentrations of eight indicative elements in lichen Xanthoria parietina of the Aegean region, it was possible to relate deposition to the existence of known sources of pollution in certain areas. Location of pollution sources such as iron-steel plants, and coal burning in the cities, industrial activity and two important coal-fired power plants generally corresponded with locations of highest element accumulations in the lichens.